DescriptionCondition : AS-ISPower supply and basic operation have been confirmed. Thank you for looking. [Product]SANSUI Au-?607 Integrated Amplifier [Operation/Condition (Overview)]Power supply and basic operation have been confirmed. [Appearance]?Slightly scratched and soiled [Contents]?Main unit (with power cord). [Specifications]?Dimensions (case): 448 x 160 x 441 cm?Weight (approx.): 15.7 kg This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns This product has not been tested. Therefore, returns cannot be accepted. Please understand this before purchasing. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

DescriptionCondition : USED Thank you for viewing. [Product]-SANSUI AU-?607 EXTRA integrated amplifier [Operation/Condition]-Operation confirmed.-Audio source was input into the area surrounded by the red frame in the photo, and sound output from speaker A/B was confirmed.-BASS, TREBLE, BALANCE, VOLUME, and LOUDNESS worked.*Other details other than those mentioned above have not been confirmed. [Appearance]-There are some scratches and dirt on the exterior. [Contents]-Main unit only (with power cord). [Specifications]-Type: ?-X balanced integrated amplifier-Rated power consumption (Electrical Appliance and Material Control Law): 250W-External dimensions: 430(W)x160(H)x450(D)mm-Weight: 18.0kg This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns We accept return items up to 60 days after the item has arrived. If you receive a defective product, please contact us. We will bear the return shipping costs. Please buy with confidence. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

DescriptionAbout This ItemsUsed(This product works fine.)Please check all the photos before purchasing and make sure you are satisfied before purchasing. Included Items ShippingFedEx or Japan PostWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

DescriptionGrade : Used Operation has been confirmed with a supply voltage of 100V. There are some scratches. All my products are 100% Authentic. ************************************************************************* If you purchase an electrical appliance intended for use in Japan, you may need a step-down transformer (converter) to use it because the Japanese voltage standard is 100V. Check the voltage display on the back of the product or on the adapter if one is included. In this case, the adapter display takes priority. First, check the voltage environment you will be using. 1. If the adapter and product display are both 100V or 100V-, use a transformer to make it 100V and use this unit. You need to use a power adapter. 2. For appliances with built-in motors (such as turntables), use an adapter or a transformer with a wattage 2-3 times higher than the products wattage (adapter takes priority). 3. For appliances that generate heat (such as vacuum tube amplifiers), use an adapter or a transformer with a wattage 1.25 times higher than the products wattage (adapter takes priority). Watts/Volt-Amps (W/VA) = Volts x Amps Furthermore, the shape of the power plug varies from country to country. Please prepare the power plug along with the transformer. *We are not responsible for any damage caused by not using a transformer.Payment We usually ship within 5 business days of receiving cleared payment. Shipping We ship using FedEx, DHL.International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer?s responsibility.Please check with your country?s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. We do not undervalue (i.e., ship as a gift or greeting card). Buyer is responsible for payment of customs duties. No refunds will be made for refusal to pay customs duties.

[JUNK] SANSUI Integrated Amplifier AU-?607i ?-X balance circuit adopted From JPN Description SANSUI Integrated Amplifier INTEGRATED AMPLIFIER Model: AU-?607i Product Description External dimensions: Width 448 x Height 160 x Depth 441 mm Weight: 16.0 kg Effective output: 105 W + 105 W (6 ?) 0 W + 90 W (8 ?) Input sensitivity/impedance: 0.003% or less (8 ?) Signal-to-noise ratio: Phono MM: 88 dB or more Phono MC: 70 dB or more Tuner, Line, CD, Tape/DAT/Play1, 2, 3: 110 dB or more Frequency response: Phono MM: 20 Hz to 20 kHz ±0.2 dB CD, Line, Tape/DAT/Play1, 2, 3: 1 Hz to 300 kHz +0 -3dB Total harmonic distortion Bass maximum change: ±5dB (50Hz) Treble maximum change: ±5dB (15kHz) Power consumption 240W -- Product details Stereo preamplifier using ?-X balanced circuit. Operation check: Only power supply was confirmed. It has not been confirmed by actual use. Therefore, it will be sold as a junk item. ?Please only purchase if you understand the meaning of junk items. The photos are all there is. As for the condition of the product, there are individual differences, so please judge by the image. There are scratches that are not visible in the photo. If you are concerned, please refrain from considering it. Payment Please pay within 3 days. Import duties and taxes are the responsibility of the buyer. Shipping Ships from Japan with tracking number and insurance. Normally, we will ship within 3 to 7 business days after payment is confirmed. It will be shipped directly from Japan by Japan Post or courier. Estimated delivery times for items depend on final destination and are subject to post office or courier processing. We will carefully pack it with packing material. PLEASE NOTE: Delivery times may be longer, especially during busy periods, bad weather or emergencies. Terms of Sale ? If you are not completely satisfied with your purchase, return it for a prompt replacement or refund your payment. ? All returned merchandise must include all original packaging including boxes, UPC barcodes, packaging and all accessories. Please let me know the specific defect. ? After we receive the returned item in its original condition, we will refund the item price less shipping and handling charges within 14 days of purchase. Or, as you agree, we will replace it for you. International Buyers - Please Note: ? Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. ? Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. ? These charges are normally collected by the carrier or upon receipt of the goods. Not to be confused with additional shipping charges. ? We do not mark merchandise value below value or mark items as gifts - U.S. and international government regulations prohibit such practice. PLEASE NOTE: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

iI SELL MY ELECTRONIC CROSSOVER CD5 SANSUI,,MINTY,,in original box and manual,,IN PERFECT WORKING AND NICE CONDITION,,, work on 120-220-240 volts LOOK all photos for condition reference.

DescriptionThank you for visiting. This product is sold as-is because its operation has not been tested or there is no environment in which it can be tested. We are selling this item as junk or as parts for those who can repair it. There is only one left, so please consider as soon as possible. All accessories are shown in the photo.Important point. Condition is a personal opinion. Please check the photos carefully. Please contact us if you have any questions. Thank you for visiting.Payment Payment can be made by credit card, PayPal, and many other methods. Payment must be made within 3 days after the end of the auction. We will ship within 10 business working days (except national holidays, Saturdays and Sundays in Japan time) for shippiing.Shipping We will send the products from DHL FedEx and JAPAN Post. The package will arrive in 5-14 days after shipping. A tracking number will be attached, so please enjoy your shopping with confidence. Shipping is only available at the address registered with PayPal. Please note that addresses not registered with PayPal will not be accepted. Ships from Monday to Friday. It is not available on weekends as the any Office is closed.Terms of Sale Customer service and satisfaction are very important to us. There is an unconditional return policy if notified within 30 days of receipt of the item. All returned items must be in their original condition. All return requests must be made within 30 days of receipt of the item. Please contact me for return first before you return it to me. The shipping cost for returned goods will be borne by the seller.Tariffs: To overseas buyersPlease be careful Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to find out what these additional costs will be before bidding or purchasing.If the cancellation is due to the purchaser, we will charge a PayPal fee. If your address has remote charges, we will charge you additional shipping charges at a later date.

DescriptionThank you for visiting. With normal use, some scratches, dirt, and deformation of the box may be seen. There is only one left, so please consider as soon as possible. All accessories are shown in the photo.Important point. Condition is a personal opinion. Please check the photos carefully. Please contact us if you have any questions. Thank you for visiting.Payment Payment can be made by credit card, PayPal, and many other methods. Payment must be made within 3 days after the end of the auction. We will ship within 10 business working days (except national holidays, Saturdays and Sundays in Japan time) for shipping.Shipping We will send the products from DHL FedEx and JAPAN Post. The package will arrive in 5-14 days after shipping. A tracking number will be attached, so please enjoy your shopping with confidence. Shipping is only available at the address registered with PayPal. Please note that addresses not registered with PayPal will not be accepted. Ships from Monday to Friday. It is not available on weekends as the any Office is closed.Terms of Sale Customer service and satisfaction are very important to us. There is an unconditional return policy if notified within 30 days of receipt of the item. All returned items must be in their original condition. All return requests must be made within 30 days of receipt of the item. Please contact me for return first before you return it to me. The shipping cost for returned goods will be borne by the seller.Tariffs: To overseas buyersPlease be careful Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to find out what these additional costs will be before bidding or purchasing.If the cancellation is due to the purchaser, we will charge a PayPal fee. If your address has remote charges, we will charge you additional shipping charges at a later date.

Item Description Condition is good. Since it is a used item, it is in good condition overall, although there are some damages and stains. Maximum output 110+110w Impedance 4-8 ohms Playback frequency 5hz-100khz SN ratio 115db or better Power consumption (W) Rated 245w, maximum 910w Well-maintained. SizeWidth 460xHeight 176xDepth 415mmWeight 18.3kg Shipping Handling time: Approximately 5-10 business days. Shipping method: Expedited shipping (FedEx /DHL /EMS): It will arrive approximately 4 days after shipment (to US), depending on the location. You can know the delivery status in detail.The method available depends on the status of the airmail.Shipping is only available at addresses registered with eBay. Please note that addresses that are not registered with eBay cannot be shipped. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding

DescriptionAll my products are 100% Authentic. Please feel free to contact us if you have any question. Shipping We ship using FedEx, DHL and Japan Post.We usually ship within 5~10 business days of receiving cleared payment.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.International Buyers - Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyers responsibility.Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.Thank you for your understanding.

Product description A 607 series integrated amplifier that uses an advanced ?-X balance circuit. The technology introduced is almost the same as the high-end model, and a newly developed insulator is used. *Advanced ?-X balance circuit has a balanced configuration in which signal transmission and amplification are performed at the same time, and the amplifiers amplification circuit and ground circuit are completely separated, so the circuit itself is generated on the speaker side. This blocks back electromotive current and common mode distortion caused by external noise. In addition, a total of four dedicated amplifiers on the + and - sides of the output drive the speakers under the same conditions from both sides, achieving low distortion, and by lowering the impedance of the circuit. The frequency characteristics have been significantly improved. The power stage is equipped with NM-LAPT developed exclusively for audio, and everything down to the bonding wire is completely non-magnetic with pure copper material to obtain excellent high frequency characteristics and current limit values. *All stages from input to output are configured as wide-range DC amplifiers, expanding the frequency characteristics of the bare characteristics, improving phase characteristics, and reducing distortion to minimize NFB. *The power stage uses a new diamond differential circuit that can take out the - side output without phase reversal, and suppresses TIM distortion due to its quick response to instantaneous signal input. Furthermore, by cascading the first-stage FETs, the circuit has a wide range and high speed. *The power supply section uses a NEW ?-X balanced power supply. As a closed loop that is independent from the ground, it minimizes power imbalance that can cause deterioration in sound quality. *A twin monaural construction is used, with the power supply section placed in the center of the amplifier and the power units placed symmetrically on either side to achieve the optimal weight balance as a structure. *Introduced isolated mechanical feedback to control amplifier vibration and resonance. Pure copper vibration damping isolation parts are used in vibration transmission paths such as between the master volume and the chassis and between the power transistor and the heat sink. Furthermore, Teflon sheets with high internal loss and excellent vibration absorption ability are pasted between the insulator and the bottom plate, and Teflon tape is pasted between the heat sink and the bonnet and chassis to isolate vibrations. *The newly developed special structure insulator is fixed with copper plated screws to suppress sound quality deterioration due to vibration. *We have carefully selected and adopted high-quality sound parts obtained through the development of Sansuis Vintage series. ARS, gold-plated lead film capacitors, RMG gold-plated resistors, etc. are used. In addition, copper plated screws are used for the front panel mounting screws. *Equipped with source power direct, all line inputs can be directly connected to the power amplifier section. *Equipped with Rec selector, 10 all gold-plated input terminals, 6 detent volumes, power cord with polarity display, etc. ?Main specifications Model Integrated Amplifier Effective output (10Hz to 20kHz, both channels operating simultaneously) 105W+105W (6?) 90W+90W (8?) Total harmonic distortion rate (at effective output) 0.003% or less (8?) Cross modulation distortion rate 0.003% or less (8?) Damping factor 150(8?) Frequency characteristics (1W) DC~300kHz+0 -3dB Input sensitivity/impedance (1kHz) 1V/5k? SN ratio (A network) 120dB or more Dynamic power 280W (2?) 220W (4?) 155W (6?) TIM distortion (SAWTOOTH) below measurement limit value Slew rate 180V/?sec Rise time 0.6?sec Input sensitivity/impedance (1kHz) Phono MM:2.5mV/47k? Phono MC:300?V/100? CD, Tuner, Line, Tape/DAT1?2?3:150mV/20k? Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mV Frequency characteristics (1W) Phono MM: 20Hz to 20kHz±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200Hz, +0 -3dB SN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or more Tone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz) Subsonic filter 16Hz(-3dB), 6dB/oct Loudness 50Hz:+6dB?10kHz:+4dB Rated power consumption 250W External dimensions Width 430x Height 161x Depth 446mm Weight 18.0kg ?The condition of the product is that there are no noticeable scratches or stains. The appearance is very beautiful and the sound is also beautiful. For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Product description A 607 series integrated amplifier that uses an advanced ?-X balance circuit. The technology introduced is almost the same as the high-end model, and a newly developed insulator is used. *Advanced ?-X balance circuit has a balanced configuration in which signal transmission and amplification are performed at the same time, and the amplifiers amplification circuit and ground circuit are completely separated, so the circuit itself is generated on the speaker side. This blocks back electromotive current and common mode distortion caused by external noise. In addition, a total of four dedicated amplifiers on the + and - sides of the output drive the speakers under the same conditions from both sides, achieving low distortion, and by lowering the impedance of the circuit. The frequency characteristics have been significantly improved. The power stage is equipped with NM-LAPT developed exclusively for audio, and everything down to the bonding wire is completely non-magnetic with pure copper material to obtain excellent high frequency characteristics and current limit values. *All stages from input to output are configured as wide-range DC amplifiers, expanding the frequency characteristics of the bare characteristics, improving phase characteristics, and reducing distortion to minimize NFB. *The power stage uses a new diamond differential circuit that can take out the - side output without phase reversal, and suppresses TIM distortion due to its quick response to instantaneous signal input. Furthermore, by cascading the first-stage FETs, the circuit has a wide range and high speed. *The power supply section uses a NEW ?-X balanced power supply. As a closed loop that is independent from the ground, it minimizes power imbalance that can cause deterioration in sound quality. *A twin monaural construction is used, with the power supply section placed in the center of the amplifier and the power units placed symmetrically on either side to achieve the optimal weight balance as a structure. *Introduced isolated mechanical feedback to control amplifier vibration and resonance. Pure copper vibration damping isolation parts are used in vibration transmission paths such as between the master volume and the chassis and between the power transistor and the heat sink. Furthermore, Teflon sheets with high internal loss and excellent vibration absorption ability are pasted between the insulator and the bottom plate, and Teflon tape is pasted between the heat sink and the bonnet and chassis to isolate vibrations. *The newly developed special structure insulator is fixed with copper plated screws to suppress sound quality deterioration due to vibration. *We have carefully selected and adopted high-quality sound parts obtained through the development of Sansuis Vintage series. ARS, gold-plated lead film capacitors, RMG gold-plated resistors, etc. are used. In addition, copper plated screws are used for the front panel mounting screws. *Equipped with source power direct, all line inputs can be directly connected to the power amplifier section. *Equipped with Rec selector, 10 all gold-plated input terminals, 6 detent volumes, power cord with polarity display, etc. ?Main specifications Model Integrated Amplifier Effective output (10Hz to 20kHz, both channels operating simultaneously) 105W+105W (6?) 90W+90W (8?) Total harmonic distortion rate (at effective output) 0.003% or less (8?) Cross modulation distortion rate 0.003% or less (8?) Damping factor 150(8?) Frequency characteristics (1W) DC~300kHz+0 -3dB Input sensitivity/impedance (1kHz) 1V/5k? SN ratio (A network) 120dB or more Dynamic power 280W (2?) 220W (4?) 155W (6?) TIM distortion (SAWTOOTH) below measurement limit value Slew rate 180V/?sec Rise time 0.6?sec Input sensitivity/impedance (1kHz) Phono MM:2.5mV/47k? Phono MC:300?V/100? CD, Tuner, Line, Tape/DAT1?2?3:150mV/20k? Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mV Frequency characteristics (1W) Phono MM: 20Hz to 20kHz±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200Hz, +0 -3dB SN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or more Tone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz) Subsonic filter 16Hz(-3dB), 6dB/oct Loudness 50Hz:+6dB?10kHz:+4dB Rated power consumption 250W External dimensions Width 430x Height 161x Depth 446mm Weight 18.0kg ?The condition of the product is C RANK: Used item with signs of use and many scratches and stains. Maintenance completed in July 2023 For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Product descriptionA 607 series integrated amplifier that uses an advanced ?-X balance circuit.The technology introduced is almost the same as the high-end model, and a newly developed insulator is used.*Advanced ?-X balance circuit has a balanced configuration in which signal transmission and amplification are performed at the same time, and the amplifiers amplification circuit and ground circuit are completely separated, so the circuit itself is generated on the speaker side. This blocks back electromotive current and common mode distortion caused by external noise.In addition, a total of four dedicated amplifiers on the + and - sides of the output drive the speakers under the same conditions from both sides, achieving low distortion, and by lowering the impedance of the circuit. The frequency characteristics have been significantly improved.The power stage is equipped with NM-LAPT developed exclusively for audio, and everything down to the bonding wire is completely non-magnetic with pure copper material to obtain excellent high frequency characteristics and current limit values.*All stages from input to output are configured as wide-range DC amplifiers, expanding the frequency characteristics of the bare characteristics, improving phase characteristics, and reducing distortion to minimize NFB.*The power stage uses a new diamond differential circuit that can take out the - side output without phase reversal, and suppresses TIM distortion due to its quick response to instantaneous signal input.Furthermore, by cascading the first-stage FETs, the circuit has a wide range and high speed.*The power supply section uses a NEW ?-X balanced power supply.As a closed loop that is independent from the ground, it minimizes power imbalance that can cause deterioration in sound quality. *A twin monaural construction is used, with the power supply section placed in the center of the amplifier and the power units placed symmetrically on either side to achieve the optimal weight balance as a structure.*Introduced isolated mechanical feedback to control amplifier vibration and resonance.Pure copper vibration damping isolation parts are used in vibration transmission paths such as between the master volume and the chassis and between the power transistor and the heat sink.Furthermore, Teflon sheets with high internal loss and excellent vibration absorption ability are pasted between the insulator and the bottom plate, and Teflon tape is pasted between the heat sink and the bonnet and chassis to isolate vibrations.*The newly developed special structure insulator is fixed with copper plated screws to suppress sound quality deterioration due to vibration.*We have carefully selected and adopted high-quality sound parts obtained through the development of Sansuis Vintage series.ARS, gold-plated lead film capacitors, RMG gold-plated resistors, etc. are used.In addition, copper plated screws are used for the front panel mounting screws.*Equipped with source power direct, all line inputs can be directly connected to the power amplifier section.*Equipped with Rec selector, 10 all gold-plated input terminals, 6 detent volumes, power cord with polarity display, etc.?Main specificationsModel Integrated AmplifierEffective output (10Hz to 20kHz, both channels operating simultaneously) 105W+105W (6?) 90W+90W (8?)Total harmonic distortion rate (at effective output) 0.003% or less (8?)Cross modulation distortion rate 0.003% or less (8?)Damping factor 150(8?)Frequency characteristics (1W) DC~300kHz+0 -3dBInput sensitivity/impedance (1kHz) 1V/5k?SN ratio (A network) 120dB or moreDynamic power 280W (2?) 220W (4?) 155W (6?)TIM distortion (SAWTOOTH) below measurement limit valueSlew rate 180V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM:2.5mV/47k?Phono MC:300?V/100?CD, Tuner, Line, Tape/DAT1?2?3:150mV/20k?Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mVFrequency characteristics (1W) Phono MM: 20Hz to 20kHz±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200Hz, +0 -3dBSN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or moreTone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz)Subsonic filter 16Hz(-3dB), 6dB/octLoudness 50Hz:+6dB?10kHz:+4dBRated power consumption 250WExternal dimensions Width 430x Height 161x Depth 446mmWeight 18.0kg?The condition of the product is that there are no noticeable scratches or stains.The appearance is very beautiful and the sound is also beautiful.For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Product descriptionA 607 series integrated amplifier that uses an advanced ?-X balance circuit.The technology introduced is almost the same as the high-end model, and a newly developed insulator is used.*Advanced ?-X balance circuit has a balanced configuration in which signal transmission and amplification are performed at the same time, and the amplifiers amplification circuit and ground circuit are completely separated, so the circuit itself is generated on the speaker side. This blocks back electromotive current and common mode distortion caused by external noise.In addition, a total of four dedicated amplifiers on the + and - sides of the output drive the speakers under the same conditions from both sides, achieving low distortion, and by lowering the impedance of the circuit. The frequency characteristics have been significantly improved.The power stage is equipped with NM-LAPT developed exclusively for audio, and everything down to the bonding wire is completely non-magnetic with pure copper material to obtain excellent high frequency characteristics and current limit values.*All stages from input to output are configured as wide-range DC amplifiers, expanding the frequency characteristics of the bare characteristics, improving phase characteristics, and reducing distortion to minimize NFB.*The power stage uses a new diamond differential circuit that can take out the - side output without phase reversal, and suppresses TIM distortion due to its quick response to instantaneous signal input.Furthermore, by cascading the first-stage FETs, the circuit has a wide range and high speed.*The power supply section uses a NEW ?-X balanced power supply.As a closed loop that is independent from the ground, it minimizes power imbalance that can cause deterioration in sound quality. *A twin monaural construction is used, with the power supply section placed in the center of the amplifier and the power units placed symmetrically on either side to achieve the optimal weight balance as a structure.*Introduced isolated mechanical feedback to control amplifier vibration and resonance.Pure copper vibration damping isolation parts are used in vibration transmission paths such as between the master volume and the chassis and between the power transistor and the heat sink.Furthermore, Teflon sheets with high internal loss and excellent vibration absorption ability are pasted between the insulator and the bottom plate, and Teflon tape is pasted between the heat sink and the bonnet and chassis to isolate vibrations.*The newly developed special structure insulator is fixed with copper plated screws to suppress sound quality deterioration due to vibration.*We have carefully selected and adopted high-quality sound parts obtained through the development of Sansuis Vintage series.ARS, gold-plated lead film capacitors, RMG gold-plated resistors, etc. are used.In addition, copper plated screws are used for the front panel mounting screws.*Equipped with source power direct, all line inputs can be directly connected to the power amplifier section.*Equipped with Rec selector, 10 all gold-plated input terminals, 6 detent volumes, power cord with polarity display, etc.?Main specificationsModel Integrated AmplifierEffective output (10Hz to 20kHz, both channels operating simultaneously) 105W+105W (6?) 90W+90W (8?)Total harmonic distortion rate (at effective output) 0.003% or less (8?)Cross modulation distortion rate 0.003% or less (8?)Damping factor 150(8?)Frequency characteristics (1W) DC~300kHz+0 -3dBInput sensitivity/impedance (1kHz) 1V/5k?SN ratio (A network) 120dB or moreDynamic power 280W (2?) 220W (4?) 155W (6?)TIM distortion (SAWTOOTH) below measurement limit valueSlew rate 180V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM:2.5mV/47k?Phono MC:300?V/100?CD, Tuner, Line, Tape/DAT1?2?3:150mV/20k?Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mVFrequency characteristics (1W) Phono MM: 20Hz to 20kHz±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200Hz, +0 -3dBSN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or moreTone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz)Subsonic filter 16Hz(-3dB), 6dB/octLoudness 50Hz:+6dB?10kHz:+4dBRated power consumption 250WExternal dimensions Width 430x Height 161x Depth 446mmWeight 18.0kg?The condition of the product is C RANK: Used item with signs of use and many scratches and stains.Maintenance completed in July 2023For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Item TitleDescriptionAbout This ItemsReleased by Sansui in 1968, this compact all-silicon transistor power amplifier was developed in pursuit of sound transparency.AppearanceThis is an old product.There are scratches and stains.Please check the photos for details.ConditionThis product has not been tested for functionality.Please bid on the assumption that it will require repair or maintenance.The fuse is blown.Please check the photos for details.Included ItemsMain unitInstruction manualShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Product descriptionAn integrated amplifier created to commemorate the 15th anniversary of the 607 series.?The power stage uses a pair of 2SK405/2SJ115 MOS FETs capable of high-speed amplification, and the advanced ?-X balance circuit brings out the capabilities of the elements to achieve high stability and delicate expressive power. .The advanced ?-X balance circuit has a structure in which dedicated amplifiers are installed on the + and - sides of the output, and the push-pull method uses a total of four amplifiers to drive the speakers from both directions, making the circuit itself immune to external noise. Common mode distortion is canceled. Furthermore, by combining it with a NEW diamond differential circuit that can instantaneously supply large currents, it achieves low impedance, clean, and excellent operating characteristics.?The power supply section uses a newly developed power transformer and electrolytic capacitor, and has a closed-loop configuration in which the power supply section is completely independent and separated from the ground, so that music signals generated from power imbalance etc. Reduces the negative impact on-The chassis uses reinforced twin monaural construction.In this structure, the power supply section consisting of a power transformer and an electrolytic capacitor is placed in the center, and the power units are arranged symmetrically. This achieves an ideal weight balance and effectively prevents sound quality deterioration due to the amplifiers natural vibrations generated from the power supply system and signal system.-Introduced isolated mechanical feedback to analyze and effectively control vibration transmission paths and magnetostriction sources.This method uses a large amount of pure copper isolation parts, which have high internal loss and excellent vibration absorption ability, and is used for power and signal systems such as between the transformer and chassis, the MOS FET mounting area, and the master volume fixing area. Vibration, resonance, and magnetostriction are thoroughly eliminated in all parts including the beginning.?The quality of the parts has been carefully considered, and we have adopted parts that are non-magnetic, vibration-proof, low impedance, and high-speed, such as specially designed power transformers and electrolytic capacitors. . -Equipped with a power amplifier direct function that inputs high-output digital music signals directly to the power amplifier section.Additionally, in order to achieve high-purity transmission and amplification, it is equipped with a balanced input terminal in addition to the normal input terminal.Equipped with source power direct, all line input signals can be transmitted to the power amplifier with one touch without passing through any accessory functions.Equipped with a recording selector function, even if you connect a CD player directly to the power amplifier, you can back-record other sources while listening. For example, while listening to the input source in Normal 1, you can record another source such as a CD in Normal 2.- Equipped with a phono equalizer for MC/MM cartridges.- There are 11 input terminals, all of which use gold-plated terminals.- A 6-unit detent volume is used for the volume, and the volume knob is machined from aluminum.-Equipped with real side wood.?The power cable uses a power cord with polarity indication.- Equipped with an AC outlet.-There were two color variations: gold and black.?Main specificationsModel integrated amplifierEffective output (10Hz to 20kHz,Both channels operate simultaneously) 55W+55W(6?) 45W+45W(8?)Total harmonic distortion rate (at effective output) 0.008% or less (8?)Cross modulation distortion rate 0.008% or less (8?)Damping factor 150(8?)Frequency characteristics (1W) DC ~ 300kHz +0dB, -3dBInput sensitivity/impedance 1V/5k?(1kHz)SN ratio (A network) 120dB or moreDynamic power 70W (6?) 85W (4?) 90W (2?)TIM distortion (SAWTOOTH) below measurement limit valueSlew rate 180V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM:2.5mV/47k?Phono MC:300?V/100?CD, Tuner, Line, Tape/DAT-1, 2, 3: 150mV/20k?Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mVFrequency characteristics (1W) Phono MM:20Hz~20kHz ±0.2dBCD, Tuner, Line, Tape/DAT-1, 2, 3: DC ~ 200kHz +0dB, -3dBSN ratio (A network) Phono MM:88dB or morePhono MC:70dB or moreCD, Tuner, Line, Tape/DAT-1, 2, 3: 110dB or moreTone control Bass maximum variation: ±6dB (50Hz)Treble maximum change: ±6dB (15kHz)Subsonic filter 16Hz(-3dB), 6dB/octLoudness +4dB(50Hz), +4dB(10kHz)Rated power consumption 160WExternal dimensions Width 460x Height 159x Depth 446mmWeight 18.8kg?The condition of the product is that there are no noticeable scratches or stains.For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

VersandBitte wählen Sie nachfolgend die Versandart aus. ExpressversandVersandmethode: DHLoderFedExoderJapanPost*Es wird in 3–7 Tagen eintreffen.*Mit Trackingnummer und Versicherung. Eigenschaften des Ladens *Um Pakete sicher an Kunden im Ausland zuzustellen, verpacken wir sie sorgfältig und liefern die Produkte sicher aus. *Wir versenden den Artikel, sobald er fertig ist. *Um alle Kunden zufrieden zu stellen, beantworten wir individuelle Anfragen höflich und zeitnah.Internationale Käufer - Bitte beachten Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren gehen zu Lasten des Käufers. Bitte erkundigen Sie sich beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sind, bevor Sie ein Gebot abgeben oder einen Kauf tätigen. 1.Hinweise (Bitte vor dem Kauf lesen.) *Wenn sich die Adresse des Käufers an einem abgelegenen Ort befindet, werden zusätzliche 25 $ benötigt. Die Spannung des ausgestellten elektronischen Geräts beträgt 100 VAC, ein japanisches Produkt. Wenn Sie die Spannung in Ihrem Land verwenden, empfehlen wir den Einsatz eines Transformators.

Product descriptionAn integrated amplifier created by pouring Sansuis technology into a simple body.*The amplifiers amplification circuit is separated from the ground circuit, and a revolutionary advanced ?-X balance circuit equipped with NM-LAPT is adopted.This circuit transmits and amplifies signals simultaneously, and has a balanced configuration that does not receive external noise or common mode distortion. The push-pull system with four amplifiers on the + and - sides of the output drives the speakers from both + and - sides under the same conditions.In addition, NM-LAPT, developed specifically for audio, lowers the impedance of the circuit and improves dynamic frequency characteristics.*A stable power supply is achieved by using the NEW ?-X balanced power supply with a closed-loop configuration packed with high-quality sound components such as custom-made electrolytic capacitors and power transformers.*Vibrations in the power supply system and signal system are effectively controlled by reinforced twin monaural construction with optimal weight balance, and vibration transmission paths such as between the volume and chassis, where all music signals pass, are Isolated mechanical feedback is introduced, and vibration damping is performed using pure copper isolation parts.*We thoroughly pursue the quality of each part, including the part through which the music signal passes directly, as well as the insulator with vibration dispersion and non-resonance design. *Equipped with a power amplifier direct that allows audio signals to be input directly to the power amplifier section.*By setting the CD player to power amplifier direct, you can back-record CDs and other sources while listening. For example, while playing the source in Normal 1, it is possible to record the source such as a CD input in Normal 2.* Equipped with a 6-unit detent volume, gold-plated input terminal, large speaker terminal, and polarity display power cord/AC outlet.?Main specificationsModel integrated amplifierEffective output (10Hz to 20kHz, both channels working simultaneously) 6?: 105W+105W 8?: 90W+90WTotal harmonic distortion rate (at effective output) 0.003% or less (8?)Frequency characteristics (1W) DC ~ 300kHz, +0 -3dBCross modulation distortion rate 0.003% or less (8?)Damping factor 150(8?)Input sensitivity/impedance (1kHz) 1V/5k?SN ratio (A network) 120dB or moreDynamic power 2?:280W 4?:220W 6?:155WTIM distortion (SAWTOOTH) below measurement limit valueSlew rate 180V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM: 2.5mV/47k? Phono MC: 300?V/100? CD, Tuner, Line, Tape/DAT1?2?3: 150mV/20k?PhonoMaximum allowable input MM(THD 0.01%):210mVMC(THD 0.1%):21mVFrequency characteristics (1W) Phono MM: 20Hz to 20000Hz ±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200kHz +0 -3dBSN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or moreTone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz)Subsonic filter 16Hz(-3dB), 6dB/octLoudness 50Hz:+4dB?10kHz:+3dBRated power consumption 250WExternal dimensions Width 430x Height 159x Depth 446mmWeight 18.0kg?The condition of the product is junk.When checking, I was able to confirm that sound was coming from each speaker terminal.There are contact defects in various parts such as knobs, and the sound cuts out when operated.No accessories.This item is a junk item. Please use it as a repair base or parts collection.For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Sansui BA-60 STEREO BASIC AMPLIFIERIn good working condition.

[JUNK] SANSUI AU-?607DR Integrated Amplifier Advanced ?-X Balance Circuit Japan Description Release date 1991 Features/Notes When checked, sound was confirmed to be coming out of each speaker terminal. There are poor contacts in various parts such as knobs, and sound cuts out when operated. Features/Notes No accessories, sold as is. Features/Notes This product is a junk product. Please use it as a repair base or for parts. Rated output 105W+105W(6?) Playback frequency DC?300kHz Power consumption (W) 250W Payment Please pay within 3 days. Import duties and taxes are the responsibility of the buyer. Shipping Ships from Japan with tracking number and insurance. Normally, we will ship within 3 to 7 business days after payment is confirmed. It will be shipped directly from Japan by Japan Post or courier. Estimated delivery times for items depend on final destination and are subject to post office or courier processing. We will carefully pack it with packing material. PLEASE NOTE: Delivery times may be longer, especially during busy periods, bad weather or emergencies. Terms of Sale ? If you are not completely satisfied with your purchase, return it for a prompt replacement or refund your payment. ? All returned merchandise must include all original packaging including boxes, UPC barcodes, packaging and all accessories. Please let me know the specific defect. ? After we receive the returned item in its original condition, we will refund the item price less shipping and handling charges within 14 days of purchase. Or, as you agree, we will replace it for you. International Buyers - Please Note: ? Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. ? Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. ? These charges are normally collected by the carrier or upon receipt of the goods. Not to be confused with additional shipping charges. ? We do not mark merchandise value below value or mark items as gifts - U.S. and international government regulations prohibit such practice. PLEASE NOTE: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Product descriptionAn improved model of AU-?607NRA. *In order to eliminate interference between the power supply windings that occur within the transformer, an EI core transformer dedicated to the speaker drive is installed in the final stage in an independent left and right power supply system, and a toroidal transformer is installed in the power supply of the pre-drive stage. The circuit configuration is such that the power supply to the final stage is made independent.In addition, a ripple filter circuit is adopted for the power supply in the pre-drive stage, making it a more stable power supply.The toroidal transformer is completely shielded with pure copper material, Teflon sheet, and special rubber, and is attached to the back of the front panel in a floating state.*Uses Sansuis original Ultimate ?-X balance circuit.By doubling the current margin of the driver stage compared to conventional models and achieving A-class operation, we have achieved an excellent operating environment in the transmission and amplification process from the input to the output of the first stage, driver stage, and final stage.In addition, a balanced amplifier has a balanced configuration in which all stages do not depend on the ground circuit, and dedicated amplifiers are placed on both sides of the L/R +-, and the push-pull method uses a total of 4 amplifiers to drive the speakers under the same conditions. Unlike conventional ground amplifiers, the sound quality is not impaired by hum or noise components flowing through the ground, and the distortion mechanism caused by the speaker drive is removed, improving sound quality.*The pre-drive stage is equipped with a NEW diamond differential circuit that can output +- without phase inversion.As a result, it has excellent responsiveness to input signals that change momentarily, can supply a stable large current, and suppresses the occurrence of TIM distortion to a very low level.*NM-LAPT (Nonmagnetic Linear Amplification Power Transistor) is used as the power device.*Twin monaural construction is used, with the transformer and electrolytic capacitor placed in the center of the chassis, and the L/R power units arranged symmetrically.This prevents L/R interference and structurally controls vibrations generated in the power supply system and vibration system.*2 Adopts a NEW ?-X balanced power supply that is further advanced with a transformer power supply circuit.The final stage is a left and right independent balanced closed type, the predrive stage is a vertically symmetrical balanced type low current power supply, and the power supply for the predrive stage and final stage is completely separated from the transformer to form a completely independent closed loop configuration.Furthermore, the electrolytic capacitor in the power supply section for the final stage uses an original block capacitor that includes a separator and plain foil in addition to low-magnification sound quality foil.*Reinforced twin monaural construction and isolated mechanical feedback. A mechanical floating system is used for the power transformer.The transformer is installed in a state where it flows from the chassis, structurally blocking interference with sound quality due to vibrations in the power supply system.*A new shape heatsink is used to suppress vibration and resonance of the heatsink to which the power transistor is attached.*Uses an oval insulator made of special materials and structure.*The volume uses a 6-unit detent volume.*Uses a power cord with polarity display.?Main specificationsModel integrated amplifierEffective output (10Hz to 20kHz,Both channels operate simultaneously) 100W+100W (6?)80W+80W(8?)Total harmonic distortion rate (at effective output) 0.003% or less (8?)Cross modulation distortion rate 0.003% or less (8?)Damping factor 150(8?)Frequency characteristics (1W) DC~300kHz+0 -3dBInput sensitivity/impedance 1V/10k?(1kHz)SN ratio (A network) 120dB or moreDynamic power 310W(2?) 210W(4?) 150W(6?)TIM distortion (SAWTOOTH) below measurement limit valueSlew rate 150V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM: 2.5mV/47k? Phono MC: 300?V/100? CD, Tuner, Line, MD/Tape1, Tape2: 150mV/20k?Phono maximum allowable input MM(THD 0.01%):210mVMC(THD 0.1%):21mVFrequency characteristics (1W) Phono MM:20Hz~20kHz±0.2dB CD, Tuner, Line, MD/Tape-1, Tape-2:DC~300kHz+0 -3dBSN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, MD/Tape-1, Tape2: 110dB or moreTone control Bass maximum change: ±6dB (50Hz) Treble maximum change: ±6dB (15kHz)Subsonic filter 16Hz(-3dB), 6dB/octLoudness +6dB(50Hz) +4dB(10kHz)Rated power consumption 230WExternal dimensions Width 432x Height 165x Depth 450mmWeight 19.0kgPhono maximum allowable input MM(THD 0.01%):210mV?The condition of the product is junk.One side: Sound comes out or no sound comes out. Depending on how you press the speaker changeover switch, sound may come out, but we cannot determine the cause.The color of the top plate is uneven.The rubber part was removed due to deterioration of the feet. Since the plastic surface is exposed, there is a risk of scratches where it is placed.A power cable is not included, so please check for scratches on the knobs.This is a junk item that cannot be returned or exchanged.For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Product descriptionThe integrated amplifier which adopted the ?-X balance circuit and the NEW diamond differential circuit.*It uses an ?-X balance circuit, and the circuit configuration uses a balanced amplification method that inevitably cancels noise. This differs from normal amplifier circuits in that not only the signal amplification but also the power supply is not referenced to earth.Furthermore, the AU-?607Extra uses a NEW diamond differential circuit and lowers the impedance of the entire circuit to further improve quality.In addition, the speaker drive is not the conventional method of driving between the amplifier output and ground, but a double push-pull method that drives the speaker from both directions, with the + side of the speaker equally as the - side. This corresponds to impedance changes and phase changes.*Uses a NEW diamond differential circuit in which the FETs used in the first stage are connected in cascade.This reduces the influence on sound quality from connected equipment due to differences in output impedance when using power amplifier direct.*The power supply section uses Sansuis proprietary balanced power supply that is independent from the ground and has a closed loop.Since the current is always equal on the + and - sides, the negative effects on the music signal caused by unbalanced power supplies are eliminated.The parts used include a large power transformer and a custom electrolytic capacitor developed for audio use.*The amplifier uses twin monaural construction.This is done by placing the power supply section in the center and symmetrically separating the power amplifier section mounted on a large heat sinker, which provides a sense of stability and eliminates the difference in signal levels between the L/R units. Compatible with crosstalk, power system vibration, and music signal interference.*Equipped with a power amplifier direct switch and two normal input systems.*Uses a unique direct access rotary switch that selects the input source from inside the rear terminal. The contacts of the rotary switch are gold plated to ensure high quality.* Equipped with a source direct switch, it is possible to play without going through attached circuits such as balanced volume, muting, and subsonic filter.?Main specificationsModel ?-X Balanced Integrated AmplifierEffective output (10Hz to 20kHz, both channels driven) 6?:105W+105W8?:90W+90WTotal harmonic distortion rate (at effective output) 0.003% or less (8?)Frequency characteristics (1W) DC ~ 300kHz, +0 -3dBCross modulation distortion rate 0.003% or less (8?)Damping factor 150(8?)Input sensitivity 1V(Normal)SN ratio (A network) 120dB or moreTIM distortion (SAWTOOTH) below measurement limit valueSlew rate ±180V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM:2.5mV/47k?Phono MC:300?V/100?CD, Tuner, Line, Tape Play1?2?3:150mV/20k?Phono maximum allowable input MM(THD 0.01%):210mVMC(THD 0.1%):21mVFrequency characteristics Phono MM: 20Hz to 20000Hz, ±0.2dBCD, Line: DC ~ 300kHz, +0 -3dBTape Play-1, 2, 3: 1Hz ~ 300kHz +0 -3dBSN ratio Phono MM:88dB or morePhono MC:70dB or moreCD, Tuner, Line, Tape Play-1?2?3: 110dB or moreTone control maximum variation BASS: ±6dB (50Hz)TREBLE:±6dB(15kHz)Subsonic filter 16Hz(-3dB), 6dB/octLoudness 50Hz:+8dB10kHz:+6dB Audio muting -20dBRated power consumption (Electrical Appliance and Material Control Law) 250WExternal dimensions Width 430x Height 160x Depth 450mmWeight 18.0kg?The condition of the product is Rank B/There are some signs of use such as scratches and dirt, but it is in good condition for normal use.For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Product descriptionStereo integrated amplifier that uses an ?-X balance circuit.?The ?-X balance circuit uses separate dedicated amplifiers for both the + and - sides of the signal to transmit and amplify it, and since it is separated from the ground, it is theoretically possible to avoid noise and distortion from the ground. prevents the effects ofIn addition, the power section input stage is a differentially balanced input using low-noise FETs, and the common mode rejection ratio (CMRR) on the + side and - side of the signal system is large, so common mode noise and distortion are eliminated from the circuit. itself has been cancelled.Furthermore, whereas conventional amplifiers drive between the amplifier output and ground, the ?-X balance circuit drives from both the + side and the - side, so power supply noise is not mixed in, and the output from the speakers is reduced. This prevents IHM (Interface Hum Modulation) from occurring due to back electromotive force.- The power supply section uses a unique balanced power supply that is independent from the ground and has a closed loop.The current is always equal on the + and - sides, which prevents the signal from being adversely affected by unbalanced power supplies, and is designed to be resistant to noise from the AC line and fluctuations in the power supply.In addition, it is equipped with a large-capacity transformer with excellent regulation, as well as a gold supply capacitor and fast recovery diode with fast charging and discharging speed.- In addition to the master regulator, a twin regulator system is used in which a local regulator is placed on the phono equalizer board and preamplifier board.Since it is a two-stage regulator, it is resistant to power fluctuations and load fluctuations, enabling a stable and clean power supply.- Equipped with an active tone control that can also be defeated.?The power section board uses a discrete board with excellent vibration damping properties.?The chassis uses a solid and anti-flux chassis that is designed to eliminate vibration and noise interference. Each stage is completely separated and shielded by a separator, and external vibrations are also prevented by five large insulators (CF5 insulators) with optimal load distribution.-Uses a phono equalizer with FET configuration.- Equipped with a source direct function that connects all input sources directly to the predrive stage, bypassing the subsonic filter, muting, and balance control accessory circuits.?Main specificationsModel ?-X Balanced Integrated AmplifierRated output(10Hz to 20kHz, both channels driven) 105W+105W(6?) 90W+90W(8?)Total harmonic distortion rate (at effective output) 0.003% or less (8?)Cross-modulation distortion rate (at effective output) 0.003% or less (8?)Damping factor 150(8?)TIM distortion (SAWTOOTH) below measurement limit valueInput sensitivity/impedance(1kHz) Phono MM:2.5mV/47k?Phono MC:300?V/100?CD, Tuner, Line, Processor, Tape/DAT/Play1?2?3: 150mV/47k?Phono maximum allowable input MM:210mV(THD 0.01%)MC:21mV(THD 0.1%)Frequency characteristics Phono MM:20Hz~20kHz ±0.2dBCD, Line, Tape/DAT/Play1?2?3:1Hz~300kHz +0 -3dBSN ratio Phono MM:88dB or morePhono MC:70dB or moreTuner, Line, CD, Tape/DAT/Play1?2?3: 110dB or moreTone control Bass maximum variation: ±5dB (50Hz)Treble maximum change: ±5dB (15kHz)Subsonic filter 16Hz(-3dB), 6dB/octLoudness 50Hz:+8dB10kHz:+6dBAudio muting -20dBRated power consumption 240WExternal dimensions Width 448x Height 160x Depth 441mmWeight 16.0kg?The condition of the product is slightly scratched and dirty, and we have only confirmed that it is energized.It has not been confirmed by actually using it.Therefore, it will be listed as a junk item.For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

viewport content=width=device-width, initial-scale=1> Sansui AU-D607X DECADE Balanced Stereo Amplifier In Working Condition From Japan Description Model number: AU-D607X DECADEWarranty period: 6 months Warranty Estimated shipping: 1-2 days later Registration date: September 15, 2024 Release date:1985Features/NotesDecade series integrated amplifier that uses Twin Diamond X balanced amplifierFeatures/NotesThis item is maintained by a designated vendor. Please see the photos below for maintenance details.Features/NotesI replaced the volume VR because the L CH volume was low. I cleaned the balance VR and tone control VR. I cleaned the input switch and other contacts. Two of the input display lamps were broken, so I replaced five of them. I replaced 2 speaker relays and confirmed A/B sound output. I checked the DC balance and bias. I checked each input and output.Features/NotesEffective output: 90W+90W(8?)Features/NotesFrequency characteristics: DC ~ 300kHz +0 -3dBFeatures/NotesWeight: Approx. 15.0kgFeatures/NotesThere are signs of use and small scratches. Please check the photos. Only the maintenance statement is included.WEB No.1010180000058954[Display based on the Secondhand Goods Business Act: Niigata Prefecture Public Safety Commission No. 461060001043] ?Note only for products that are turned on.?????????????Products that do not turn on are not eligible? The power supply for this product is AC100V 50/60Hz.A transformer may be required in some countries.Please prepare the transformer on the purchase side. Outlet specifications??A typeIf it is different from A type, a converter is required. You in areas other than 100V.If you use the transformer I sell, you can use it in areas other than 100V.ebay.comhttp://www.ebay.com/itm/373547463184ebay.ukhttps://www.ebay.com/itm/373547520813 ebay.euhttps://www.ebay.com/itm/373547520926ebay.auhttps://www.ebay.com/itm/373547520958We also sell other than ebay.com.Please contact us if you would like to purchase.If you have any other questions, please contact me.* It may not be possible in some areasPlease consider carefully.Payment ??We accept payment by PayPal only. ??Please payment within ??3 days after the auction closed. Shipping free shippingShip by express EMS?or DHL or FedExWe will deliver by the fastest delivery method. Shipment with damage / loss insuranceWith tracking number ??(10-15 days to US) ??(10-30days or more to Other countries) Terms of Sale ??[About returned goods]????Returns are accepted only if the item was ? not the item described in the aution. [Return] Returned goods for personal reasons will not be accepted. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Provided by HARU