This is very high-quality hi-fi power Amp. It’s super clean, like new, working condition. I tested with the Klipsch 600 M and the larger Klipsch Hershey, also, tested with Pioneer Hpm 100 and also VANDERSTEEN C1. It sounds unbelievable. It sounds like tube amp Flat shipping $45.00 US 48 estate no overseas shipping no return

Biete seltenen Rotel RY-1010 Peak Level Spectrum Analyzer. Guter Zustand, voll Funktionsfähig. Hintergrundbeleuchtung und alle LEDs funktionieren einwandfrei. Siehe Fotos.Mit original Bedienungsanleitung und Werbeprospekt der 1010 Serie. Offer rare Rotel RY-1010 Peak Level Spectrum Analyzer.Good condition, fully functional. Backlight and all LEDs work properly. See photos.Comes with original instruction manual and 1010 series promotional brochure. International shipping. AllgemeinHersteller: Rotelzurück zu Rotel sonstigesModell: RY-1010Baujahre: 1981 - 1982Hergestellt in: JapanFarbe: schwarz und silberLeistungsaufnahme: n.a.Abmessungen (BxHxT): 430 x 100 x 290mmGewicht: 4,5kg AnschlüsseAnzahl der Eingänge:Mikrofon: 200µV 30kOhmLine in: min. 2mV 30kOhmAnzahl der Ausgänge:Rauschgenerator: 100mV 3kOhm Technische DatenBänder: 10, 1 OktaveMittenfrequenzen (Hz): 32, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16kAnzeigebereich/Empfindlichkeit:36dB = 3dB pro Segment +/- 0,5dB24dB = 2dB pro Segment +/- 1,0dB36dB = 3dB pro Segment +/- 1,5dBBezugspegel: 580mVrms = 0dBv = 775mVppAnzeigemodi:Links, Links + Rechts, RechtsEingangspegel: anpassbar

ROTEL RX-1050 A/V Receiver Used, Working Perfectly Including power cord, and remote control Specifications Output Power 100 WPC continuous 20~20,000 Hz at 0.05% THD into 8?. 0.05% SMPTE IMD at 100 WPC. Frequency Response Line level input: 10 Hz - 70 kHz ±3 dB. Phono input: 20Hz-20kHz ±1dB. Tone Controls ±8 dB at 100 Hz and 10 kHz. SNR Line level input: 92 dB A, IHF. Phono input: 74 dB A, IHF. Maximum Input Levels Line level input: 5 V. Phono input: > 120 mV. FM 75? coaxial euro connector. 87.5 ~ 108.0 MHz in 200 kHz steps. 1.3 V output. Only one default bandwidth. 2.0 dB capture ratio. 14.2 dBf usable. 20.2 dBf mono, 45.3 dBf stereo for 50dB quieting. 70 dB SNR mono, 65 dB SNR stereo at 65 dBf. 0.3% THD mono, 0.5% THD stereo at 65 dBf. 30 Hz ~ 14 kHz ±1.5 dB. 47 dB selectivity at ±400 kHz. 80 dB spurious response ratio. 65 dB image rejection. 80 dB IF response ratio. 52 dB AM suppression. 40 dB separation at 100 Hz, 45 dB at 1 kHz and 35 dB at 10 kHz. AM 520 ~ 1710 kHz in standard 10 kHz steps. Loop antenna input. Only one default bandwidth. 25 dB selectivity. 35 dB image response ratio. 40 dB SNR. 250 mV output. Video 1 Volt p-p 75? composite. 3 Hz ~ 10 MHz ±3 dB. 45 dB SNR. Rated Power Consumption 300W. Size 17 x 4-3/4 x 14-1/8 WHD. 432 x 121 x 359 mm WHD. Height with feet removed: 7 (176mm). Weight 22.7 lbs. (10.3kg).

Welcome to my listing for rotel Vintage Amp in full working order Condition Good Used condition please refer to pictures Spec CONDITIONS If you have less then 10 feedback please contact me before buying or bidding thanks :) FEEDBACK Customer satisfaction is very important for me. If you have any problem with your order, please contact me straight away and I will do my best to make you satisfied, please do not leave a negative feedback or late delivery before we resolve your problem.- SHIPPING I will do my best to ensure that all orders placed before 12pm on a working day are dispatched the same day. But please allow us 2 days delivery time on all orders I use below couriers UK mail/ DHL with free 24h delivery to UK mainland Northern Ireland and Highlands price may be very so please contact me before purchase Also for Nother Ireland and highlands I am unable to use above courier and will have to use Collet plus with is in the same price but delivery is sated by courier as 3 to 5 days Global shipping program delivery time may be very depending from your country / location RETURNS I want to make sure that you are 100% happy with all purchases you make with me. On rare occasions we understand that you may need to return a product. Our returns process is simple and as follows Step 1 - Contact us stating reason for return Step 2 - Await return guidelines to be issued which will provide all information required to return your item (s). Step 3 - Follow Guidelines and Return Product Step 4 - Generally once received we expect to provide a refund or exchange as requested within 1 working day

ROTEL RX-1050 A/V Receiver Used, Working Perfectly Including power cord, and remote control Specifications Output Power 100 WPC continuous 20~20,000 Hz at 0.05% THD into 8?. 0.05% SMPTE IMD at 100 WPC. Frequency Response Line level input: 10 Hz - 70 kHz ±3 dB. Phono input: 20Hz-20kHz ±1dB. Tone Controls ±8 dB at 100 Hz and 10 kHz. SNR Line level input: 92 dB A, IHF. Phono input: 74 dB A, IHF. Maximum Input Levels Line level input: 5 V. Phono input: > 120 mV. FM 75? coaxial euro connector. 87.5 ~ 108.0 MHz in 200 kHz steps. 1.3 V output. Only one default bandwidth. 2.0 dB capture ratio. 14.2 dBf usable. 20.2 dBf mono, 45.3 dBf stereo for 50dB quieting. 70 dB SNR mono, 65 dB SNR stereo at 65 dBf. 0.3% THD mono, 0.5% THD stereo at 65 dBf. 30 Hz ~ 14 kHz ±1.5 dB. 47 dB selectivity at ±400 kHz. 80 dB spurious response ratio. 65 dB image rejection. 80 dB IF response ratio. 52 dB AM suppression. 40 dB separation at 100 Hz, 45 dB at 1 kHz and 35 dB at 10 kHz. AM 520 ~ 1710 kHz in standard 10 kHz steps. Loop antenna input. Only one default bandwidth. 25 dB selectivity. 35 dB image response ratio. 40 dB SNR. 250 mV output. Video 1 Volt p-p 75? composite. 3 Hz ~ 10 MHz ±3 dB. 45 dB SNR. Rated Power Consumption 300W. Size 17 x 4-3/4 x 14-1/8 WHD. 432 x 121 x 359 mm WHD. Height with feet removed: 7 (176mm). Weight 22.7 lbs. (10.3kg).

Welcome to my listing for rotel Vintage Amp in full working order Condition Good Used condition please refer to pictures just please note look like some one drilled the hold in a front facia and installed Amp in racking or somethink other then that may need a bit TLC but it looks good and sound event better Spec CONDITIONS If you have less then 10 feedback please contact me before buying or bidding thanks :) FEEDBACK Customer satisfaction is very important for me. If you have any problem with your order, please contact me straight away and I will do my best to make you satisfied, please do not leave a negative feedback or late delivery before we resolve your problem.- SHIPPING I will do my best to ensure that all orders placed before 12pm on a working day are dispatched the same day. But please allow us 2 days delivery time on all orders I use below couriers UK mail/ DHL with free 24h delivery to UK mainland Northern Ireland and Highlands price may be very so please contact me before purchase Also for Nother Ireland and highlands I am unable to use above courier and will have to use Collet plus with is in the same price but delivery is sated by courier as 3 to 5 days Global shipping program delivery time may be very depending from your country / location RETURNS I want to make sure that you are 100% happy with all purchases you make with me. On rare occasions we understand that you may need to return a product. Our returns process is simple and as follows Step 1 - Contact us stating reason for return Step 2 - Await return guidelines to be issued which will provide all information required to return your item (s). Step 3 - Follow Guidelines and Return Product Step 4 - Generally once received we expect to provide a refund or exchange as requested within 1 working day

Here in the cave, we have another great and fantastic find a Rotel Ra 1312 Integrated Amplifier 80 Watts Per Channel Very nice considering the age. This a very rare find and hardly comes up for sale. This unit works great and will be double boxed for shipping. Shipping only applies to the 48 states of the USA Now a little bit about the unit. It is 19 x 7.1 x 15.9 inches. 80 watts per channel with a very smooth sound. 20Hz to 20kHz with no more than 0.1% THDHarmonic Distortion 0.1% at rated power output 20Hz to 20kHzIntermodulation Distortion 0.05% at 1kHz, rated power output -1dBFrequency Response 5Hz - 100kHz, - 1dB at 1 watt per channelDamping Factor 70 ±10%Input Sensitivity/Impedance 1000mV/54k?Speaker Impedance 4 to 16?, A or B ; 8 to 16?, A BAll sales are final and sold as is. Signature is required. Please email me if you have any questions.Mikey

Very Good Condition Rotel RB-1080 Silver High Current Two Channel Amplifier. I would have kept this AMP for life, but I recently downsized homes and its just too powerful for the space I have now. Ive always only used it at about 50-60% of its capacity, and now I dont use anywhere close to that. Works flawlessly, comes with all power cables.

What you see is what you get. Great looking unit. Originally listed this without remote then I found the remote. Same day shipping Patrick care. Please take a moment to check out my Feedback. I’ve been selling on eBay since 1999.

Rotel RC-972 & RB-981 Stereoplay 20th Anniversary Limited Edition. Wegen Verkleinerung meiner Anlage gebe ich diese seltene Kombination aus Vor-/ und Endstufe von Rotel ab. Nr 59 von 999 je gebauten Gerten dieser Konfiguration. Inkl Zertifikat, den nummerierten Schildern und smtlichen Anleitungen und natrlich der beleuchteten, programmierbaren, originalen Fernbedienung. Daten RC-972 lt Herstellerseite: - 5 Hochpegeleingnge - 1 Phono-MM-Eingang (AUX1) - 2 Stereo-Pre-Outs - Bass- und Hhen-Regler (abschaltbar) - Geruschspannungsabstand: 95 dB - Leistungsaufnahme: max. 10 Watt - Gewicht: 4,3 kg - Mae 440 x 72 x 286 mm (B x H x T) Daten RB-981 (Herstellerangaben): - 2/1-Kanal mit striktem Dual-Mono-Aufbau - Stereo-Cinch-Eingnge - 2 x 130 W 8 Ohm bei 0,03% Klirrfaktor (Sinus) - 2 x 170 W 4 Ohm bei 0,05% Klirrfaktor (Sinus) - Ausgangsleistung in Brckenschaltung (20 - 20.000 Hz,

.HI-FI NEWS & MUSIC REVIEWS SEE ABOVE SEE ALL REVEWS NOT JUST A VERY GOOD READ ALSO INDEPTH REVIEWS KARDON - ROTEL - ARCAM -TOSHIBA - CAMBRIDGE - PANASONIC - BRYSTON - B&W - INFINITY

Used amp 100% working condition No dents or damages Power cord included