Ich verkaufe meine geliebte Rotel Vor- und Endstufe. Nur komplett, nicht Einzeln! Beide Teile habe ich am 28.11.2014 originalverpackt (keine Vorführgeräte, keine Aussteller) bei dem High-End Händler Schlegelmilch in Haßfurt gekauft. Rechnungskopie lege ich bei. Beide Teile waren nie defekt und standen nur in meinem Hörzimmer, kein mobiler Einsatz. Nichtraucherhaushalt. Der Zustand ist neuwertig. Der Klang ist sehr räumlich, kraftvoll und die beiden Teile spielen an jedem Lautsprecher hervorragend (ich hatte die B&W 702 angeschlossen). Verkaufe da ich meine Anlage upgegradet habe. Für Testbericht und weitere technische Informationen etc. bitte googeln. Versand nur in D. Abholung wäre natürlich besser. Probehören nach Vereinbarung möglich.Der Preis ist für beide Geräte! Rotel RB 1582 MK II Seriennummer: 707 4111065 B: 43cm, T: 38cm, H: 14,5cmRotel RC 1570 Seriennummer: 705 4241046 B. 43cm, T: 31cm, H: 10cmDisplay und LED alle Top. Keine Pixelfehler.Fernbedienung neuwertig, funktioniert einwandfrei. Batteriefach sauber.Dongel für Bluetooth Empfang ist mit dabei (Code 0000)Beide Beschreibungen, Stromkabel und Original Rotel Kartons sind dabei.Versand erfolgt in den zwei einzelnen Kartons mit DHL. Abholung wäre mir lieber!Versand wegen der sehr schweren Endstufe leider etwas teuerer. (16,50 & 8.-) Nur Bieten wenn das Nachfolgende für Sie okay ist:Privatauktion: Kein Umtausch, Wandlung, Rücknahme, Garantie.Ich erstelle keine Rechnungsbelege.Nur Zahlung über ebay SystemNein ich versende nicht ins AuslandBitte nicht trotzdem nach Umtausch, Rechnung, Versand ausserhalb von fragen :-)!Problemen einfach Nachricht senden wir finden schon eine Lösung. Bis jetzt hat ja immer alles geklappt! Bewerten wäre nett, ich mache es auf jeden Fall :-).

Beautifully built Audiophile Stereo Pre + Power Amplfier Combo - Made in Britain You're bidding on a beautifully built audiophile bundle.  They do not include the original boxes but everything will be overpacked to ensure safety while shipping. The Preamplifier is missing the original remote but I will include an aftermarket remote. **PLEASE NOTE:  This item is not only listed on Ebay but also listed on other selling platforms/forums, so we reserve the right to cancel the auction early or reverse the transaction if it becomes sold.  We will always try our best to remove / update the listings  as soon as.**  - Rotel RB-1582 MkII RB1582MKII Stereo Power Amplifier Amp; Black The Rotel RB-1582 MkII provides up to 200 watts per channel, and it's 4-ohm stable, so it's compatible with a wide array of speakers. It has a custom-designed toroidal transformer inside, regulated by high-quality, British-made capacitors. It helps your speakers get loud, and at the same time offers pinpoint control over the stop/start motion of the drivers, for a dynamic, accurate listening experience. Rotel engineered this amplifier to deliver nuanced sound in a stereo music system, but you can also use it to drive one pair of speakers in a multi-channel home theater system. There are balanced XLR and unbalanced RCA inputs on the rear panel, plus two pairs of 5-way speaker binding posts. Product highlights:200 watts per channel into 8 ohms (20-20,000 Hz) at 0.03% THD with 2 channels driven4-ohm stable for use with a wide range of speakersClass AB amplifier designcustom-made toroidal transformerhigh-quality, British-made capacitorsfrequency response: 10-100,000 Hz (±0.5dB)signal-to-noise ratio: 116 dBstereo balanced XLR and unbalanced RCA inputstwo pairs of 5-way binding post speaker connectorsswitchable 12-volt in/out triggerdetachable power cordrack mounting ears included Dimensions: 17W x 5-7/8H x 16Dweight: 39 lbs. Rotel RC-1590 Pre Amplifier: Aftermarket Remote Includedstereo preamplifier with digital and analog inputs to handle a variety of music sourcespremium Texas Instruments 32-bit/384kHz digital to analog converterdual custom-built toroidal transformers provide isolated power supplies for analog and digital signal pathsfrequency response: 10-100,000 Hz (line inputs, ±0.1dB); 20-20,000 Hz (phono input, ±0.2dB); 20-20,000 Hz (digital inputs, ±0.5dB)signal-to-noise ratio: 117 dB (line); 80 dB (phono); 117 dB (digital)total harmonic distortion: 0.002%support for MQA and MQA Studio filesRoon testeddimmable front-panel displayremote control Connections:4 unbalanced stereo RCA inputsdedicated phono input for turntables with moving magnet cartridgesbalanced stereo XLR input3 optical digital and 3 coaxial digital inputs (up to 24-bit/192kHz resolution)USB Type-B input for connecting a computer (PCM up to 32-bit/384kHz resolution)USB Type-A port on front panel handles audio signals from an iPod®, iPhone®, or iPad®dual stereo RCA preamp outputsdual stereo XLR outputs1 optical digital and 1 coaxial digital audio outputdual mono RCA subwoofer outputsfront-panel 3.5mm headphone outputRotel Link input/outputallows connected Rotel products to communicate with each other and be controlled via the Rotel app3.5mm IR inputdual 3.5mm 12-volt trigger outputsEthernet port connects the amp to your home network for software updates and integration with 3rd-party control systemsRS-232 port for use with home automation control systems, like Crestron Dimensions: 17-1/16W x 5-3/4H x 15-1/8Dweight: 22.3 lbs.

Beautifully built Audiophile Stereo Pre + Power Amplfier Combo - Made in Britain Youre bidding on a beautifully built audiophile bundle. They do not include the original boxes but everything will be overpacked to ensure safety while shipping. The Preamplifier is missing the remote but theyre very affordable online. **PLEASE NOTE: This item is not only listed on Ebay but also listed on other selling platforms/forums, so we reserve the right to cancel the auction early or reverse the transaction if it becomes sold. We will always try our best to remove / update the listings as soon as.** - Rotel RB-1582 MkII RB1582MKII Stereo Power Amplifier Amp; Black The Rotel RB-1582 MkII provides up to 200 watts per channel, and its 4-ohm stable, so its compatible with a wide array of speakers. It has a custom-designed toroidal transformer inside, regulated by high-quality, British-made capacitors. It helps your speakers get loud, and at the same time offers pinpoint control over the stop/start motion of the drivers, for a dynamic, accurate listening experience. Rotel engineered this amplifier to deliver nuanced sound in a stereo music system, but you can also use it to drive one pair of speakers in a multi-channel home theater system. There are balanced XLR and unbalanced RCA inputs on the rear panel, plus two pairs of 5-way speaker binding posts. Product highlights:200 watts per channel into 8 ohms (20-20,000 Hz) at 0.03% THD with 2 channels driven4-ohm stable for use with a wide range of speakersClass AB amplifier designcustom-made toroidal transformerhigh-quality, British-made capacitors frequency response: 10-100,000 Hz (±0.5dB)signal-to-noise ratio: 116 dBstereo balanced XLR and unbalanced RCA inputstwo pairs of 5-way binding post speaker connectorsswitchable 12-volt in/out triggerdetachable power cordrack mounting ears included Dimensions: 17W x 5-7/8H x 16D weight: 39 lbs. Rotel RC-1590 Pre Amplifier: No Remote Included stereo preamplifier with digital and analog inputs to handle a variety of music sourcespremium Texas Instruments 32-bit/384kHz digital to analog converterdual custom-built toroidal transformers provide isolated power supplies for analog and digital signal pathsfrequency response: 10-100,000 Hz (line inputs, ±0.1dB); 20-20,000 Hz (phono input, ±0.2dB); 20-20,000 Hz (digital inputs, ±0.5dB)signal-to-noise ratio: 117 dB (line); 80 dB (phono); 117 dB (digital)total harmonic distortion: 0.002%support for MQA and MQA Studio filesRoon testeddimmable front-panel displayremote controlConnections:4 unbalanced stereo RCA inputsdedicated phono input for turntables with moving magnet cartridgesbalanced stereo XLR input3 optical digital and 3 coaxial digital inputs (up to 24-bit/192kHz resolution)USB Type-B input for connecting a computer (PCM up to 32-bit/384kHz resolution)USB Type-A port on front panel handles audio signals from an iPod®, iPhone®, or iPad®dual stereo RCA preamp outputsdual stereo XLR outputs1 optical digital and 1 coaxial digital audio outputdual mono RCA subwoofer outputsfront-panel 3.5mm headphone outputRotel Link input/outputallows connected Rotel products to communicate with each other and be controlled via the Rotel app3.5mm IR inputdual 3.5mm 12-volt trigger outputsEthernet port connects the amp to your home network for software updates and integration with 3rd-party control systemsRS-232 port for use with home automation control systems, like CrestronDimensions: 17-1/16W x 5-3/4H x 15-1/8Dweight: 22.3 lbs.

Beautifully built Audiophile Stereo Pre + Power Amplfier Combo - Made in Britain Youre bidding on a beautifully built audiophile bundle. They do not include the original boxes but everything will be overpacked to ensure safety while shipping. The Preamplifier is missing the remote but theyre very affordable online. **NOTE: This item are also listed seperately here on Ebay and also listed on other platforms so we reserve the right to cancel the auction early or reverse the transaction if its sold. We will always try our best to remove / update the listings as soon as.** - Rotel RB-1582 MkII RB1582MKII Stereo Power Amplifier Amp; Black The Rotel RB-1582 MkII provides up to 200 watts per channel, and its 4-ohm stable, so its compatible with a wide array of speakers. It has a custom-designed toroidal transformer inside, regulated by high-quality, British-made capacitors. It helps your speakers get loud, and at the same time offers pinpoint control over the stop/start motion of the drivers, for a dynamic, accurate listening experience. Rotel engineered this amplifier to deliver nuanced sound in a stereo music system, but you can also use it to drive one pair of speakers in a multi-channel home theater system. There are balanced XLR and unbalanced RCA inputs on the rear panel, plus two pairs of 5-way speaker binding posts. Product highlights:200 watts per channel into 8 ohms (20-20,000 Hz) at 0.03% THD with 2 channels driven4-ohm stable for use with a wide range of speakersClass AB amplifier designcustom-made toroidal transformerhigh-quality, British-made capacitors frequency response: 10-100,000 Hz (±0.5dB)signal-to-noise ratio: 116 dBstereo balanced XLR and unbalanced RCA inputstwo pairs of 5-way binding post speaker connectorsswitchable 12-volt in/out triggerdetachable power cordrack mounting ears included Dimensions: 17W x 5-7/8H x 16D weight: 39 lbs. Rotel RC-1590 Pre Amplifier: No Remote Included stereo preamplifier with digital and analog inputs to handle a variety of music sourcespremium Texas Instruments 32-bit/384kHz digital to analog converterdual custom-built toroidal transformers provide isolated power supplies for analog and digital signal pathsfrequency response: 10-100,000 Hz (line inputs, ±0.1dB); 20-20,000 Hz (phono input, ±0.2dB); 20-20,000 Hz (digital inputs, ±0.5dB)signal-to-noise ratio: 117 dB (line); 80 dB (phono); 117 dB (digital)total harmonic distortion: 0.002%support for MQA and MQA Studio filesRoon testeddimmable front-panel displayremote controlConnections:4 unbalanced stereo RCA inputsdedicated phono input for turntables with moving magnet cartridgesbalanced stereo XLR input3 optical digital and 3 coaxial digital inputs (up to 24-bit/192kHz resolution)USB Type-B input for connecting a computer (PCM up to 32-bit/384kHz resolution)USB Type-A port on front panel handles audio signals from an iPod®, iPhone®, or iPad®dual stereo RCA preamp outputsdual stereo XLR outputs1 optical digital and 1 coaxial digital audio outputdual mono RCA subwoofer outputsfront-panel 3.5mm headphone outputRotel Link input/outputallows connected Rotel products to communicate with each other and be controlled via the Rotel app3.5mm IR inputdual 3.5mm 12-volt trigger outputsEthernet port connects the amp to your home network for software updates and integration with 3rd-party control systemsRS-232 port for use with home automation control systems, like CrestronDimensions: 17-1/16W x 5-3/4H x 15-1/8Dweight: 22.3 lbs.

Beautifully built Audiophile Stereo Pre + Power Amplfier Combo - Made in Britain Youre bidding on a beautifully built audiophile bundle. They do not include the original boxes but everything will be overpacked to ensure safety while shipping. The Preamplifier is missing the remote but theyre very affordable online. **PLEASE NOTE: This item is not only listed on Ebay but also listed on other selling platforms/forums, so we reserve the right to cancel the auction early or reverse the transaction if it becomes sold. We will always try our best to remove / update the listings as soon as.** - Rotel RB-1582 MkII RB1582MKII Stereo Power Amplifier Amp; Black The Rotel RB-1582 MkII provides up to 200 watts per channel, and its 4-ohm stable, so its compatible with a wide array of speakers. It has a custom-designed toroidal transformer inside, regulated by high-quality, British-made capacitors. It helps your speakers get loud, and at the same time offers pinpoint control over the stop/start motion of the drivers, for a dynamic, accurate listening experience. Rotel engineered this amplifier to deliver nuanced sound in a stereo music system, but you can also use it to drive one pair of speakers in a multi-channel home theater system. There are balanced XLR and unbalanced RCA inputs on the rear panel, plus two pairs of 5-way speaker binding posts. Product highlights:200 watts per channel into 8 ohms (20-20,000 Hz) at 0.03% THD with 2 channels driven4-ohm stable for use with a wide range of speakersClass AB amplifier designcustom-made toroidal transformerhigh-quality, British-made capacitors frequency response: 10-100,000 Hz (±0.5dB)signal-to-noise ratio: 116 dBstereo balanced XLR and unbalanced RCA inputstwo pairs of 5-way binding post speaker connectorsswitchable 12-volt in/out triggerdetachable power cordrack mounting ears included Dimensions: 17W x 5-7/8H x 16D weight: 39 lbs. Rotel RC-1590 Pre Amplifier: No Remote Included stereo preamplifier with digital and analog inputs to handle a variety of music sourcespremium Texas Instruments 32-bit/384kHz digital to analog converterdual custom-built toroidal transformers provide isolated power supplies for analog and digital signal pathsfrequency response: 10-100,000 Hz (line inputs, ±0.1dB); 20-20,000 Hz (phono input, ±0.2dB); 20-20,000 Hz (digital inputs, ±0.5dB)signal-to-noise ratio: 117 dB (line); 80 dB (phono); 117 dB (digital)total harmonic distortion: 0.002%support for MQA and MQA Studio filesRoon testeddimmable front-panel displayremote controlConnections:4 unbalanced stereo RCA inputsdedicated phono input for turntables with moving magnet cartridgesbalanced stereo XLR input3 optical digital and 3 coaxial digital inputs (up to 24-bit/192kHz resolution)USB Type-B input for connecting a computer (PCM up to 32-bit/384kHz resolution)USB Type-A port on front panel handles audio signals from an iPod®, iPhone®, or iPad®dual stereo RCA preamp outputsdual stereo XLR outputs1 optical digital and 1 coaxial digital audio outputdual mono RCA subwoofer outputsfront-panel 3.5mm headphone outputRotel Link input/outputallows connected Rotel products to communicate with each other and be controlled via the Rotel app3.5mm IR inputdual 3.5mm 12-volt trigger outputsEthernet port connects the amp to your home network for software updates and integration with 3rd-party control systemsRS-232 port for use with home automation control systems, like CrestronDimensions: 17-1/16W x 5-3/4H x 15-1/8Dweight: 22.3 lbs.

Beautifully built Audiophile Stereo Pre + Power Amplfier Combo - Made in Britain Youre bidding on a beautifully built audiophile bundle. They do not include the original boxes but everything will be overpacked to ensure safety while shipping. The Preamplifier is missing the remote but theyre very affordable online. **NOTE: This item are also listed seperately here on Ebay and also listed on other platforms so we reserve the right to cancel the auction early or reverse the transaction if its sold. We will always try our best to remove / update the listings as soon as.** - Rotel RB-1582 MkII RB1582MKII Stereo Power Amplifier Amp; Black The Rotel RB-1582 MkII provides up to 200 watts per channel, and its 4-ohm stable, so its compatible with a wide array of speakers. It has a custom-designed toroidal transformer inside, regulated by high-quality, British-made capacitors. It helps your speakers get loud, and at the same time offers pinpoint control over the stop/start motion of the drivers, for a dynamic, accurate listening experience. Rotel engineered this amplifier to deliver nuanced sound in a stereo music system, but you can also use it to drive one pair of speakers in a multi-channel home theater system. There are balanced XLR and unbalanced RCA inputs on the rear panel, plus two pairs of 5-way speaker binding posts. Product highlights:200 watts per channel into 8 ohms (20-20,000 Hz) at 0.03% THD with 2 channels driven4-ohm stable for use with a wide range of speakersClass AB amplifier designcustom-made toroidal transformerhigh-quality, British-made capacitors frequency response: 10-100,000 Hz (±0.5dB)signal-to-noise ratio: 116 dBstereo balanced XLR and unbalanced RCA inputstwo pairs of 5-way binding post speaker connectorsswitchable 12-volt in/out triggerdetachable power cordrack mounting ears included Dimensions: 17W x 5-7/8H x 16D weight: 39 lbs. Rotel RC-1590 Pre Amplifier: No Remote Included stereo preamplifier with digital and analog inputs to handle a variety of music sourcespremium Texas Instruments 32-bit/384kHz digital to analog converterdual custom-built toroidal transformers provide isolated power supplies for analog and digital signal pathsfrequency response: 10-100,000 Hz (line inputs, ±0.1dB); 20-20,000 Hz (phono input, ±0.2dB); 20-20,000 Hz (digital inputs, ±0.5dB)signal-to-noise ratio: 117 dB (line); 80 dB (phono); 117 dB (digital)total harmonic distortion: 0.002%support for MQA and MQA Studio filesRoon testeddimmable front-panel displayremote controlConnections:4 unbalanced stereo RCA inputsdedicated phono input for turntables with moving magnet cartridgesbalanced stereo XLR input3 optical digital and 3 coaxial digital inputs (up to 24-bit/192kHz resolution)USB Type-B input for connecting a computer (PCM up to 32-bit/384kHz resolution)USB Type-A port on front panel handles audio signals from an iPod®, iPhone®, or iPad®dual stereo RCA preamp outputsdual stereo XLR outputs1 optical digital and 1 coaxial digital audio outputdual mono RCA subwoofer outputsfront-panel 3.5mm headphone outputRotel Link input/outputallows connected Rotel products to communicate with each other and be controlled via the Rotel app3.5mm IR inputdual 3.5mm 12-volt trigger outputsEthernet port connects the amp to your home network for software updates and integration with 3rd-party control systemsRS-232 port for use with home automation control systems, like CrestronDimensions: 17-1/16W x 5-3/4H x 15-1/8Dweight: 22.3 lbs.

Beautifully built Audiophile Stereo Power Amplfier - Made in Britain You're bidding on a beautifully built amplifier (please see pictures, its the bottom unit only).  It does not include the original boxes but everything will be overpacked to ensure safety while shipping.  **NOTE:  This item are also listed seperately here on Ebay and also listed on other platforms so we reserve the right to cancel the auction early or reverse the transaction if it's sold.  We will always try our best to remove / update the listings  as soon as.**  - Rotel RB-1582 MkII RB1582MKII Stereo Power Amplifier Amp; Black The Rotel RB-1582 MkII provides up to 200 watts per channel, and it's 4-ohm stable, so it's compatible with a wide array of speakers. It has a custom-designed toroidal transformer inside, regulated by high-quality, British-made capacitors. It helps your speakers get loud, and at the same time offers pinpoint control over the stop/start motion of the drivers, for a dynamic, accurate listening experience. Rotel engineered this amplifier to deliver nuanced sound in a stereo music system, but you can also use it to drive one pair of speakers in a multi-channel home theater system. There are balanced XLR and unbalanced RCA inputs on the rear panel, plus two pairs of 5-way speaker binding posts. Product highlights:200 watts per channel into 8 ohms (20-20,000 Hz) at 0.03% THD with 2 channels driven4-ohm stable for use with a wide range of speakersClass AB amplifier designcustom-made toroidal transformerhigh-quality, British-made capacitorsfrequency response: 10-100,000 Hz (±0.5dB)signal-to-noise ratio: 116 dBstereo balanced XLR and unbalanced RCA inputstwo pairs of 5-way binding post speaker connectorsswitchable 12-volt in/out triggerdetachable power cordrack mounting ears included Dimensions and warranty:17W x 5-7/8H x 16D (3U rack spaces)weight: 39 lbs.