This auction is for an original armboard for the Micro Seiki BL91 turntable. The armboard number is 1205. The armboard is in excellent cosmetic condition. It shows only minor imperfections from use and storage. - I only ship to an address in the USA.

MICRO SEIKI BL-91 Turntable w/ A1202 Arm Base Dust Cover Excellent Japan Description Condition: Used MICRO SEIKI BL-91 Turntable with Arm Base A1202/rubber belt/transport screws ..etc.?ConditionEach part has been polished/cleaned.The dust cover is polished with a special abrasive depending on the level of scratches, and the finish is polished to enhance transparency. The platter and metal parts are polished to remove dirt and rust as much as possible.Dust cover/operation plate part/platter/rubber mat?The cover is clean and transparent with no major scratches.?The platter/arm base/operation plate parts are also in good condition.?The rubber mat is also soft and has no deterioration or warping.Cabinet- There are a few dotted linear marks on the top surface, but overall there is no major damage and it is shiny.- The hinges remain open without any damage.- The rubber inside the insulator is also elastic and functions without any problems.Overall it is in good condition. Considering the age, we judge it to be a good product.We have carried out a total maintenance/operation check in preparation for this listing. We measured the electronic parts/lubricated the spindle with oil/cleaned each contact and adjusted each part. It is in a condition that you can use with confidence.TurntableWorks well, rotates normally, and can be switched between 33 and 45 rpm/adjusted. The stable rotation has been confirmed with a stroboscope.- The pulley operates normally with the ON/OFF knob.- There is no problem with the light turning on.*This item is common to 50/60Hz.There are no problems with the above operations and it works well.?Product DetailsManufacturer: MICROModel Number: BL-91Dimensions : Width 532 x Height 175 x Depth 440mmA-1202 Arm Base compatible Tonearm:?SAEC WE-308, WE-308SX, WE-317?Accessories?Dust cover?Rubber mat (MICRO DISK-SE 22M)?Rubber belt?Stroboscope (MICRO MST-105)?Platter?Arm base (MICRO A1202 hole diameter: approx. 28mm)?Instruction manual (original)?Transport screws x 3 (The transport screws will be attached when shipped. Please remove the three red screws under the operation panel before use.) Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

MICRO SEIKI S-1500 Shaft Assembly for BL-91 Tested Works well from Japan F/S DescriptionUsed ; It has been confirmed to work. It is in very good condition with no noticeable scratches or stains. Manufacturer?MICROModel Number?S-1500 This shaft assembly is used for the 1500 series, some BL series/RX series, etc. Shipping Standard Shipping(Japan Post,FedEx) The package will arrive 5-14days after shipment.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Biete gebrauchten Plattenspieler an.Universum F 2091 - Micro Seiki DD 23 mit C.E.C. RS 3 auf Headshell mit SME - AnschlussExcel System hat eine neue Tonacord NB-Nadel D 965 -Leichtes SystemAuflage 1,5 g - Linker und rechter Kanal ca. 233 , 238 OhmHaube hat starke Gebrauchsspuren - keine Risse .Scharniere stabil.Gerät ist gereinigt und ein Kondensator wurde ausgetauscht.Läuft jetzt schon einige Tage und er hatte zweimal ein Fehler beim Gleichlauf!Abholung bevorzugt in 46244 Bottrop - Kirchhellen.Ein Versand kommt in Frage, wenn der Käufer alle Risiken übernimmt.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

Product Details Brand: MICRO SEIKI Model: BL-91 MPN: N/A Serial Number: 9020218 Size (L×H×D): 17.5 x 43 x 44 cm Weight: 16,000g Bundle Item: N/A Country of Manufacture: Japan Condition Functionality: Does not work Appearance: Scratches, Stain, Cover is broken see the photo Condition Rank Brand New Brand new, never been used Mint Pre-owned, like new Near Mint Pre-owned, almost no signs of use Excellent Pre-owned, minimal signs of use Very Good Very good condition, with some signs of use Good Works okay, with some signs of use Normal Works okay, with heavy signs of use For Parts It does not work normally Shipping Shipping Carrier: DHL(From Japan) Expedited Shipping (Outside US) We usully ship within 3 business days of reciving cleared payment.(Japan Time) Buyers Responsibility **International Buyers Please Read Carefully:** Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. About Us: We are mojax inc. We sell reuse items such as luxury brand items, electronics products, and toys. We rediscover the value in reuse items and share it with the world. We belong to The Association Against Counterfeit Product Distribution which aims to prevent and eliminate the distribution of counterfeit and illegal products. We strive to sell only genuine products to our customers.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

Description ?Total Condition Rank : Excellent *Please check the rank table below ? Include : Please confirm the accessories with photos. All the accessories appearing in the photos are attached. *If you want to know more details of condition, please feel free to contact me.I can send more photos if you want. ConditionRankDetails99%Like NewA new, unused item with absolutely no sign of wear, but pre-owned. 97-98%Top MintAlmost no signs of use.95-96%MintMinimal sings of use.93-94%Near MintSome scratches and dirt.91-92%ExcellentMany scratches and dirt. No problem for use.86-90%GoodMany big scratches and dirt. No problem for use.80-85%For PartsAs-is. It does not work normally. Use for parts. Payment We accept PayPal payment only. Please make payment after we sent an invoice. Please pay within 3 days of winning the auction. **Please read our Return Policy before a successful bid. Please purchase our item only if you accept our Return Policy. If you have any questions, please email me before purchase. Shipping Sipping is Standard Shipping. I ship the item to your Paypal registered address via standard shipping with tracking number. Item(s) will be shipped in 10 business day after your purchase. I confirmed a receipt of your payment.(excluding weekends & Japanese holidays) Depending on the country, I will charge tariffs on buyers before shipping. I will charge tariffs with Paypal. If you wish combined shipping with other items, please let us know. We will calculate the total shipping cost and will inform you. About Us Thank you for visiting my store.My store is in Hokkaido, Japan. All accessories are included in the description that we have posted in list. Please refer to the description carefully. Cause the time difference we might not be able to response your question in real time, but we will reply your questions as soon as possible. We look forward to having a dealing with you! International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. Please check with Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse for additional shipping charges. Please use English, Japanese when you contact us about a complaint of the item.

????Including & Condition Details: As shown in photos. MICRO BL-91 turntable/arm base A1206/rubber belt/transportation screws/original box, etc. ?ConditionEach part has been polished/cleaned. Depending on the level of scratches, the dust cover is polished with a special abrasive and the finish is polished to enhance transparency. Polish the platter and metal parts until they are as clean as possible to remove dirt and rust. Dust cover/Operation plate section/Platter/Rubber mat - There are some scratches/scratches on the cover, but there is no major damage and it is clean and transparent. -The rubber mat is soft and shows no signs of deterioration or warping. ?The platter/arm base/operation plate part is also in very good condition. Cabinet - There are some circular marks on the platter installation surface, but overall there is no major damage and the cabinet is glossy and in very good condition. ?Hinges also remain open without damage. - The rubber inside the insulator has some wear, but it is elastic and is currently functioning without any problems. It is in absolutely beautiful condition. Considering its age, we consider it to be in very good condition. ?We perform aging for half a day to one day to confirm the operation. For this listing, we have carried out a comprehensive maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence. TurntableWorks well, rotates normally, and can switch between 33 and 45 rotations/adjust speed. The stable rotation has also been confirmed using a stroboscope. ?The pulley operates normally using the ON/OFF knob. - There is no problem with the light turning on. *This item is common for 50/60Hz. There are no problems with all of the above operations, and the product is in very good working order. ?Product contents Manufacturer: MICRO Model number: BL-91 Dimensions: Width 532 x Height 175 x Depth 440mm ?Accessories ?Dust cover ?rubber mat ?rubber belt ?platter ?arm base (for MICRO A1206 SME short arm) ?instruction manual ( Copy) ?Stroboscope (MICRO) ?Original box x 2 ?Transportation screws x 3 ?When shipped, the transportation screws will be attached. Please remove the 3 red screws under the operation panel before use. ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Universum F 2091 Direktangetriebener Halbautomat baugleich OEM Micro Seiki DD 23 Wurde alles getestet und funktioniert.

????Including & Condition Details: As shown in photos. MICRO RT-2000VA suction type turntable compatible with BL-91/1500 series ?Condition There are two scratches near the center of the top. There are other minor dullness and scratches, but no major damage is found and the item is in a shiny state. There is no wear or damage to the suction rubber either on the inner or outer circumference. ?OperationWe have confirmed that records are properly adsorbed using the operational adsorption spindle/pump unit. ?Product contentsManufacturer: MICROModel number: RT-2000VASize: Diameter approx. 309mm x Height 46mmWeight: approx. 3.15kg ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

About: Looking for the best audio quality a turntable can offer? Then check out this MICRO SEIKI BL-91 / BL91L Belt Drive Record Player System Turntable. Boasting a brown color, a belt drive system and 45RPM and 33.3RPM speed settings, you will be thrilled at the audio quality. Weighing 16kg, this unit is built to last and provide accurate and high-quality audio for years to come. Please note: I am selling this item as is, and will be happy to answer your questions. Condition: Cartridge not included. This item powers on as you can see in the photos. There are one or two scratches on the cover, but there is no major damage and it is clean and transparent as shown in the photo. The rubber mat is soft and shows no signs of deterioration or warping. The platter/arm base/operation plate part is also in very good condition. Cabinet Hinges also remain open without damage. Considering its age, we consider it to be in very good condition. The Turntable Works well, rotates normally, and can switch between 33 and 45 rotations/adjust speed. The pulley operates normally using the ON/OFF knob. There is no problem with the light turning on. I am selling the record collection and audio equipment from the private residence of a lifelong record enthusiast. Now in his later years, he has decided at last to sell his collection. He took care and joy in maintaining his record collection and always used hi-quality equipment. You get the exact item in the photos. I personally handled it as little as possible. Please check my feedback for reliability. Will ship safely (as always). *This item does include shipping insurance.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

MICRO SEIKI BL-91 DescriptionThe BL-91 uses an external belt drive system.In addition to the stock aluminum die-cast platter, the RT-2000G 8kg gunmetal platter of the MICRO RX-2000 can be replaced.The MICRO A-1200 series arm base is interchangeable.By replacing the base, many tone arms can be set.The RX-2000 looks heavy, and you can change the arm to your liking, so it can be used in a wide range of applications.Manufacturer?MICROModel Number?BL-91Dimensions: 532mm (W) x 175mm (H) x 440mm (D)A-1201 base compatible tone arm: MICRO MA-505, 505S, 505X, MA-707X, AUDIO CRAFT AC-300MKII, SAEC WE-407/23 Operation checkWe have aged the product for half a day to one day to check the operation.We have performed total maintenance and operation checks for this exhibit.We have measured electronic parts, lubricated spindle oil, cleaned each contact point, and adjusted each part.It is in good condition for safe use.The turntable rotates normally and can be switched between 33 and 45 rpm and the speed can be adjusted.The rotation stability has been confirmed with a stroboscope.The pulley operates normally with the ON/OFF knob.No problem with light illumination.If you find any defects after arrival, please feel free to contact us for a free return. Please contact us for a free return policy (limited to 30 days after delivery). AccessoryDust coverRubber matRubber beltPlatterArm base (MICRO A1201, hole diameter: approx. 28mm)Instruction manual (copy)Transport screw x 3 PackagingWhen exporting overseas, we will ship the product in reinforced cardboard boxes to prevent damage during transportation. If the product comes with its original box, we will ship it with the original box protected. PrecautionsWhen using the product, please check the voltage supported by the product and the voltage in your area carefully. If the voltage is different from the product specifications, not only will the product not function properly, it may also damage the equipment. About Handling TimeShips within 5 business day.Please note that Saturdays, Sundays, and holidays do not count as business days. About Shipping PolicyWe ship via FedEx, DHL or Japan Post. International Buyers - Please Note:Duties, taxes, and fees are not included in the product price or shipping cost. You are responsible for paying any duties, taxes, or fees that may be incurred when importing products into your country. We also recommend that you check with your customs office in advance of your purchase to determine how much these additional costs will be.