When it comes to high audio performance, the quality of the current being delivered to a hi-fi unit is overly important. Noise in the supply current may be injected into the sound or couple with critical circuits, like the clock, leading to less-than-optimal performance. A low noise supply is therefore mandatory to squeeze the last bit of sound quality out of your DAC or amplifier. Of course, a low noise design involves quality, room occupation and cost way beyond those acceptable in budget designs. That’s why M2Tech offers the Van Der Graaf MkII: users who purchased the Young MkIII and the Nash Phono Preampmplifier may later allocate some more budget to increase their performance by adding the Van Der Graaf MkII. Extremely easy to use, its benefits go from the higher stability of the clocks (with related increased soundstage sharpness and details rendition) to a darker background due to the lower noise floor. The Van Der Graaf MkII remembers the order user followed to activate the four outputs: when switching off, it follows the reverse order and remember the activation order upon subsequient switch-on. The Van Der Graaf MkII is provided with an IR receiver and is able to trap the ON/OFF commands from the remote controllers of all other Rockstars Series units. This allows user to power all the attached units on and off with a single command with the right switching order. Van Der Graaf MkII works great together with… Young MkIII and Nash Phono Preamplifier …to go one step further in the search for highest audio performance. Specifications — — Input: 90-265VAC, 50/60Hz (VDE socket) Outputs: 2 x 9VDC or 15VDC (5.5/2.1mm jack) 2 x 5VDC:+15VDC:-15VDC (4-pin XLR) Total output power: 50W Residual noise: 3uVrms (5Hz to 22kHz) Power consumption: 60VA Size: 200x200x50mm (wxdxh) Weight: net 3kg (with ancillaries) gross 3.5g

M2Tech Young MkIII DAC / Preamp + Van Der Graaf Low-Noise PSU. Fully Boxed with accessories. All in very good condition and full working order. 100-240V ~ 50/60Hz. Specifications: Inputs: analog single-ended RCA, S/PDIF RCA, AES/EBU XLR, Optical TOSLINK, USB 2.0 high speed, BluetoothOutputs: analog balanced XLR, trigger jack 3.5mmSample frequencies: PCM 44.1kHz to 384kHz, DoP 64X to 128X, Native DSD 64x to 256xPCM resolution: 16 bits to 32 bitsSignal-to-Noise Ratio: 118dBA single-ended, 120dBA balancedTHD+N: 0.0008% at 5Vrms out balancedOutput Voltage: 2.5Vrms or 5Vrms single-ended, 5Vrms or 10Vrms balanced, 12VDC triggerOutput impedance: 100ohms single-ended, 200ohms balancedInput impedance: 47kohms analog, 75ohms SPDIF, 110ohms AESEBUSupply voltage:15VDCPower Consumption: 4W operational, 0.23W standbySize: 200x50x200mm WxHxDWeight: net 2kg including ancillaries, gross 2.5kg Any questions re. discounts, shipping etc. - please call.Will be promptly sent via tracked courier delivery - or collect and save on the delivery charge Overseas bidders - please note you will be responsible for payment of any local duties and taxes upon import.

Excellent condition, original box etc M2Tech Van Der Graaf MkII Power Supply The Van Der Graaf MkII by M2Tech Audio is a very low noise power supply for the Young MkIII and the Nash, as well as other products which need one of the Van Der Graaf MkII available output voltages. It features a vanishingly low noise voltage, same or even better than a battery. The four available outputs can be activated in any order user needs. The Van Der Graaf MkII is provided with an IR sensor which receives the on/off commands from any Rockstars Series remote control. This way, the Van Der Graaf MkII can switch its outputs on/off, as programmed by the user, by a simple remote button push. The Van Der Graaf MkII comes with all the cables needed to use all four outputs.

The Young MkIII gives you total control of the music flowing from your sources to the amplifier and then to the speakers. With a wealth of input channels and extensive control options, you have always full command on your audio system, with the greatest confidence that the quality of the original music material is delivered to the speakers without any detriment. Whether your source is a computer, a smartphone, a DVD player or a turntable, the Young MkIII delivers a crisp and alive analog sound at its outputs, to drive any amplifier at best. You control it by the front panel encoder, using the remote control or by your Android smartphone via the same wireless connection which allows you to stream audio. Streaming lovers will enjoy the high quality ensured by MQA©, while smartphone users will take advantage of aptX©. M2Tech has adopted MQA to support master quality playback and streaming. MQA is an innovative encoding algorithm that captures the original master sound quality; ‘folds’ the file into a smaller size for easy streaming or download; and authenticates the file when it plays back on an MQA-enabled device. M2Tech recognizes the sonic and technical advantages of MQA, therefore all M2Tech DAC products will include MQA in their format decoding pool. Inputs: analog single-ended (RCA) S/PDIF (RCA) AES/EBU (XLR) Optical (Toslink) USB 2.0 high speed Bluetooth© Outputs: analog balanced (XLR) trigger (jack 3.5mm) Sample frequencies: PCM 44.1kHz to 384kHz DoP 64X to 128X Native DSD 64x to 256x PCM resolution: 16 bits to 32 bits Signal-to-Noise Ratio: 118dBA (single-ended) 120dBA (balanced) THD+N: 0.0008% @ 5Vrms out balanced Output Voltage: 2.5Vrms or 5Vrms (single-ended) 5Vrms or 10Vrms (balanced) 12VDC (trigger) Output impedance: 100 Ohms (single-ended) 200 Ohms (balanced) Input impedance: 47 kOhms (analog) 75 Ohms (SPDIF) 110 Ohms (AESEBU) Supply voltage: 15VDC Power Consumption: 4W (operational) 0.23W (standby) Size: 200x200x50mm (wxdxh) Weight: net 2kg (including ancillaries) gross 2.5kg