Lab Gruppen E10:4 1000W E-Series 4 Channel Amplifier Used. Its a little dusty and may contain some scratches. Also the output doesnt work

Lab Gruppen E10:4 1000W E-Series 4 Channel Amplifier Used. Its a little dusty and may contain some scratches. Also the output doesnt work

Lab Gruppen E10:4 1000W E-Series 4 Channel Amplifier Used. Its a little dusty and may contain some scratches. Also the output doesnt work

Lab Gruppen E10:4 1000W E-Series 4 Channel Amplifier Used. Its a little dusty and may contain some scratches. Also the output doesnt work

Lab Gruppen E10:4 1000W E-Series 4 Channel Amplifier Used. Its a little dusty and may contain some scratches but works well

1,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system costEnergy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costsFlexible IntelliDrive permits delivering the 4 x 250 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channelAsymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilizationHigh efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations mains distribution and cooling systemsIDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performanceComprehensive fail safe circuit protection ensures continued operation even under reduced operating conditionsAuto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cyclesRail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loadsBuilt in 50 Hz high pass filter selectable per channel available on rear panel switchPer channel attenuation knob and signal LED on rear panel for simple commissioningEfficient cooling with temperature-controlled fans with front to back airflowAluminum front panel with power and temperature LEDs and per-channel signal and limit LEDsGPIO connector with power control and indication for further system integrationBalanced high-quality analog inputs and amplifier outputs on detachable screw terminalsSpecificationShow lessGeneralNumber of amplifier channels4Total output all channels driven1000 WPeak output voltage per channel100 V / 70 VrmsMax. output current14 ArmsMax output power (all channels driven)2 ohmsN.R.4 ohms250 W8 ohms250 W16 ohms250 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 125 W)70 V250 W100 VCan deliver 250 W to a 100 V load tapped at 500 WPerformanceTHD 20 Hz - 20 kHz at 1 W<0.1%THD at 1 kHz and 1 dB below clipping<0.05%Signal to Noise Ratio>112 dBAChannel separation (Crosstalk) at 1 kHz> 70 dBFrequency Response2 Hz - 40 kHzInput impedance20 kOhmCommon Mode Rejection (CMR)50 dBOutput impedance25 mOhmGain, Sensitivity and LimitersLimit and gain switch defining limit and gain (per channel)2 pos: Lo-Z and 70 VVPL for 70 V mode100 VVPL for Lo-Z mode63.2 VSensitivity for stated power into 8 Ohm in Lo-Z mode4 dBuSensitivity for 70.7 V out in 70 V mode4 dBuSensitivity for stated power into 4 Ohm in Lo-Z mode1 dBuSensitivity for stated power into 16 Ohm in 70 V mode3 dBuGain in 70 V mode35.2 dBGain in Lo-Z mode31.2 dBLevel adjustment (per channel)Rear panel potentiometer, from -inf to 0 dBConnectors and SwitchesInput connectors (per ch.)3 - pin detachable screw terminals, electronically balancedOutput connectors (per ch.)2 - pin detachable screw terminalsHigh pass filterFixed at 50 Hz, switchable per channelPower controlCan be used to go between standby and ONGPI (power control input)Contact closure type, 2-pin detachable screw terminal, controls the power stateGPO (power state output)Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power stateCoolingTwo fans, front-rear airflow, temperature controlled speedPowerNominal voltage100 - 240 VACOperating voltage85 – 265 VACStandby consumption<1 WMains connectorIEC inletDimensionsDimensionsW: 483 mm (19”), H: 44 mm (1 U), D: 381 mm (15”)WeightWeight6.2 kg (13.7 lbs)FinishFinishDark grey aluminum front and black steel chassisApprovalsApprovalsCE, ANSI/UL 60065 (ETL), CSA, CCC, PSE, Energy Star

Lab.Gruppen E10:4 1000W E-Series Installation Amplifier with 4 channels.. This device was pulled from a working av conference room setup. A little scratched on top, but overall in good condition (see pictures). Generic power cable included.