Offered for your consideration is a vintage Olson model S-713 12 inch full-range guitar speaker, USA-manufactured by Jensen c.1968. Olson sourced all of their speaker drivers from outside suppliers and this speaker came from Chicagos Jensen. Please have a look at my large photos and read the remaining description to decide if this capable Jensen guitar speaker should be yours. This Jensen for Olson guitar speaker is in clean, very good condition. The ribbed, deep-set paper cone has a thin crack, right next to the factory seam, which I neatly secured from the back side with surround glue. There is also a very small fissure on the integral hard paper suspension ring which I corrected the same way. The cone is otherwise unharmed and the vented voice coil dustcap is perfect. Plus, the attractive, “futuristic” cast basket is in great shape with no dings or scratches. And, the +/- input terminals are sturdy, screw-tighten binding posts which add a very nice touch. It’s a well-preserved driver, overall. Most importantly, it’s been fully tested and sounds very strong and clear with clear, detailed lower midrange extending deep into treble, and ample bass. Plus, I tested its DC resistance at 6.9?, consistent with a nominal 8 ohm driver rating. Lastly, the mount flange measures 12?” diameter, it stands 5¾” tall, and the mounting holes are spaced 8¼” adjacent / 11?” diagonal apart, c-t-c.So, as pictured and described, this Jensen for Olson 12” full-range guitar speaker is offered at a competitive price. Terms of sale:I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $18.95 for very securely packed shipping via U.S Postal Service, FedEx, or UPS with tracking and delivery confirmation. AK, HI, PR, APO & U.S. Territories must pay additional charges for U.S. Postal Service Priority Air Mail (even though checkout might still show FedEx Ground, a service not offered to those destinations for obvious reasons). International purchases accepted only from those who are able to pay with PayPal, including shipping by insured U.S Postal Service Global Priority Air Mail—fast but expensive—no exceptions. Thanks for looking!*The woofer will have a piece of double-walled cardboard secured over the cone with wire ties at the four mounting holes. Then it’ll be wrapped with a protective sheet and placed in a sturdy box with shock-absorbent materials. This will ensure the cone, surround, and terminals are fully protected, and that there are no disappointments!

CompleteFour Volume Set of Jensen Technical Monograph PamphletsVol1 LoudspeakerFrequency Response Measurements 1944Vol2Impedance Matching and Power Distribution in Loud Speaker Systems 2nd Printing1944Vol3Frequency Range & Power Considerations in Music Production 1944Vol4 TheEffective Reproduction of Speech 3rd Printing 1945 Been in my fathers basement for 50+ years. All in perfect condition!

Offered for your consideration is a vintage Jensen mid or high frequency adjustment knob removed from my LS-4b speakers, USA-made in 1981. This is the same knob style used on the LS-3b, LS-5b, LS-6b, and the earlier LS-3, LS-4, LS-5, and LS-6. The knob may also be correct for other period Jensen speakers, but you’ll have to make that determination by studying the photos. So, please have a look at the photos and measurements I’ve taken to decide if this attenuator knob is correct for your speaker. *Although the listing is written largely in singular to avoid any confusion, four (4) identical Jensen attenuator knobs are available at time of this writing. Please choose if you’d like to buy one or more in the quantity field at the top of the listing. The shipping cost will stay the same regardless of how many you purchase. This Jensen mid or high frequency adjustment knob is in clean, excellent condition. It’s made of hard plastic with striated grip surface and measures ?” in diameter at bottom x ¾” tall. There may be some very small imperfections, mainly at the bottom edge if any, but that’s all. Plus, the recessed lobe has knurling to hold your speaker’s attenuator shaft securely. As pictured and described, this useful Jensen attenuator knob is offered at a reasonable price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $3.95 for very carefully packed shipping via U.S. Postal Service with tracking and delivery confirmation. International purchases shipped by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the cabinet sticker photo is presented only for donor model reference

JENSEN ROLA Field Coil Speaker G12 12 #3 This one is fairly clean. I See photos. Sold as is . Due to age these items are being sold AS IS.Disclaimer: When buying almost 50 and 50 plus year old electronic equipment that has not had all parts replaced with new parts there is always the possibility with failure to the 50 year old part/s at any time. Some of the electronic part/s may continue for another 50 years without need of replacement and some electronic part/s may fail a few days after you start using the item.Please visit our store as we get vintage electronics of tube,test,solid state, hifi, audio, etc Many great and rare items as well.

JENSEN ROLA Field Coil Speaker G12 12 #2 This one is fairly clean. I See photos. Sold as is . Due to age these items are being sold AS IS.Disclaimer: When buying almost 50 and 50 plus year old electronic equipment that has not had all parts replaced with new parts there is always the possibility with failure to the 50 year old part/s at any time. Some of the electronic part/s may continue for another 50 years without need of replacement and some electronic part/s may fail a few days after you start using the item.Please visit our store as we get vintage electronics of tube,test,solid state, hifi, audio, etc Many great and rare items as well.

Offered for your consideration is a vintage Olson model S-713 12 inch full-range guitar speaker, USA-manufactured by Jensen c.1968. Olson sourced all of their speaker drivers from outside suppliers and this speaker came from Chicagos Jensen. A helpful eBayer informed me that this Jensen driver uses the same cone as their venerable C12N.Please have a look at my large photos and read the remaining description to decide if this capable Jensen guitar speaker should be yours. This Jensen for Olson guitar speaker is in clean, very good condition. The ribbed, deep-set paper cone has a thin crack, right next to the factory seam, which I neatly secured from the back side with surround glue. There is also a very small fissure on the integral hard paper suspension ring which I corrected the same way. The cone is otherwise unharmed and the vented voice coil dustcap is perfect. Plus, the attractive, “futuristic” cast basket is in great shape with no dings or scratches. And, the +/- input terminals are sturdy, screw-tighten binding posts which add a very nice touch. It’s a well-preserved driver, overall. Most importantly, it’s been fully tested and sounds very strong and clear with clear, detailed lower midrange extending deep into treble, and ample bass. Plus, I tested its DC resistance at 6.9?, consistent with a nominal 8 ohm driver rating. Lastly, the mount flange measures 12?” diameter, it stands 5¾” tall, and the mounting holes are spaced 8¼” adjacent / 11?” diagonal apart, c-t-c.So, as pictured and described, this Jensen for Olson 12” full-range guitar speaker is offered at a competitive price. Terms of sale:I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $18.95 for very securely packed shipping via FedEx or UPS with tracking and delivery confirmation. AK, HI, PR, APO & U.S. Territories must pay additional charges for U.S. Postal Service Priority Air Mail (even though checkout might still show FedEx Ground, a service not offered to those destinations for obvious reasons). International purchases accepted only from those who are able to pay with PayPal, including shipping by insured U.S Postal Service Global Priority Air Mail—fast but expensive—no exceptions. Thanks for looking!*The woofer will have a piece of double-walled cardboard secured over the cone with wire ties at the four mounting holes. Then it’ll be wrapped with a protective sheet and placed in a sturdy box with shock-absorbent materials. This will ensure the cone, surround, and terminals are fully protected, and that there are no disappointments!

Vintage Jensen P15LS 15 16 Ohm Speaker. Good condition other than the tear in the cone. Multimeter reading is 10.8 ohms.

Vintage pair of Jensen speakers 6x9 JPT-1669 6x9 160 watts. These speakers are in excellent original condition, and include the original grill covers. Made n USA. I have not tested these speakers, and they are not returnable. Item will ship within 3 days of auction end.

JENSEN ROLA Field Coil Speaker G12 12 #1 This one is fairly clean. It measures 5.6 Ohms. See photos. Sold as is . Due to age these items are being sold AS IS.Disclaimer: When buying almost 50 and 50 plus year old electronic equipment that has not had all parts replaced with new parts there is always the possibility with failure to the 50 year old part/s at any time. Some of the electronic part/s may continue for another 50 years without need of replacement and some electronic part/s may fail a few days after you start using the item.Please visit our store as we get vintage electronics of tube,test,solid state, hifi, audio, etc Many great and rare items as well.

Offered for your consideration is a vintage Olson model S-713 12 inch full-range guitar speaker, USA-manufactured by Jensen c.1968. Olson sourced all of their speaker drivers from outside suppliers and this speaker came from Chicagos Jensen. A helpful eBayer informed me that this Jensen driver uses the same cone as their venerable C12N.Please have a look at my large photos and read the remaining description to decide if this capable Jensen guitar speaker should be yours. This Jensen for Olson guitar speaker is in clean, very good condition. The ribbed, deep-set paper cone has a thin crack, right next to the factory seam, which I neatly secured from the back side with surround glue. There is also a very small fissure on the integral hard paper suspension ring which I corrected the same way. The cone is otherwise unharmed and the vented voice coil dustcap is perfect. Plus, the attractive, “futuristic” cast basket is in great shape with no dings or scratches. And, the +/- input terminals are sturdy, screw-tighten binding posts which add a very nice touch. It’s a well-preserved driver, overall. Most importantly, it’s been fully tested and sounds very strong and clear with clear, detailed lower midrange extending deep into treble, and ample bass. Plus, I tested its DC resistance at 6.9?, consistent with a nominal 8 ohm driver rating. Lastly, the mount flange measures 12?” diameter, it stands 5¾” tall, and the mounting holes are spaced 8¼” adjacent / 11?” diagonal apart, c-t-c.So, as pictured and described, this Jensen for Olson 12” full-range guitar speaker is offered at a competitive price. Terms of sale:I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $18.95 for very securely packed shipping via FedEx or UPS with tracking and delivery confirmation. AK, HI, PR, APO & U.S. Territories must pay additional charges for U.S. Postal Service Priority Air Mail (even though checkout might still show FedEx Ground, a service not offered to those destinations for obvious reasons). International purchases accepted only from those who are able to pay with PayPal, including shipping by insured U.S Postal Service Global Priority Air Mail—fast but expensive—no exceptions. Thanks for looking!*The woofer will have a piece of double-walled cardboard secured over the cone with wire ties at the four mounting holes. Then it’ll be wrapped with a protective sheet and placed in a sturdy box with shock-absorbent materials. This will ensure the cone, surround, and terminals are fully protected, and that there are no disappointments!

Offered for your consideration is a vintage Jensen mid or high frequency adjustment knob removed from my LS-4b speakers, USA-made in 1981. This is the same knob style used on the LS-3b, LS-5b, LS-6b, and the earlier LS-3, LS-4, LS-5, and LS-6. The knob may also be correct for other period Jensen speakers, but you’ll have to make that determination by studying the photos. So, please have a look at the photos and measurements I’ve taken to decide if this attenuator knob is correct for your speaker. *Although the listing is written largely in singular to avoid any confusion, four (4) identical Jensen attenuator knobs are available at time of this writing. Please choose if you’d like to buy one or more in the quantity field at the top of the listing. The shipping cost will stay the same regardless of how many you purchase. This Jensen mid or high frequency adjustment knob is in clean, excellent condition. It’s made of hard plastic with striated grip surface and measures ?” in diameter at bottom x ¾” tall. There may be some very small imperfections, mainly at the bottom edge if any, but that’s all. Plus, the recessed lobe has knurling to hold your speaker’s attenuator shaft securely. As pictured and described, this useful Jensen attenuator knob is offered at a reasonable price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $3.95 for very carefully packed shipping via U.S. Postal Service with tracking and delivery confirmation. International purchases shipped by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the cabinet sticker photo is presented only for donor model reference

Offered for your consideration is a vintage Olson model S-713 12 inch full-range guitar speaker, USA-manufactured by Jensen c.1968. Olson sourced all of their speaker drivers from outside suppliers and this speaker came from Chicagos Jensen. A helpful eBayer informed me that this Jensen driver uses the same cone as their venerable C12N.Please have a look at my large photos and read the remaining description to decide if this capable Jensen guitar speaker should be yours. This Jensen for Olson guitar speaker is in clean, very good condition. The ribbed, deep-set paper cone has a thin crack, right next to the factory seam, which I neatly secured from the back side with surround glue. There is also a very small fissure on the integral hard paper suspension ring which I corrected the same way. The cone is otherwise unharmed and the vented voice coil dustcap is perfect. Plus, the attractive, “futuristic” cast basket is in great shape with no dings or scratches. And, the +/- input terminals are sturdy, screw-tighten binding posts which add a very nice touch. It’s a well-preserved driver, overall. Most importantly, it’s been fully tested and sounds very strong and clear with clear, detailed lower midrange extending deep into treble, and ample bass. Plus, I tested its DC resistance at 6.9?, consistent with a nominal 8 ohm driver rating. Lastly, the mount flange measures 12?” diameter, it stands 5¾” tall, and the mounting holes are spaced 8¼” adjacent / 11?” diagonal apart, c-t-c.So, as pictured and described, this Jensen for Olson 12” full-range guitar speaker is offered at a competitive price. Terms of sale:I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $18.95 for very securely packed shipping via FedEx or UPS with tracking and delivery confirmation. AK, HI, PR, APO & U.S. Territories must pay additional charges for U.S. Postal Service Priority Air Mail (even though checkout might still show FedEx Ground, a service not offered to those destinations for obvious reasons). International purchases accepted only from those who are able to pay with PayPal, including shipping by insured U.S Postal Service Global Priority Air Mail—fast but expensive—no exceptions. Thanks for looking!*The woofer will have a piece of double-walled cardboard secured over the cone with wire ties at the four mounting holes. Then it’ll be wrapped with a protective sheet and placed in a sturdy box with shock-absorbent materials. This will ensure the cone, surround, and terminals are fully protected, and that there are no disappointments!