For sale is a used Onkyo TX-SR875 receiver. This was the top of the line in its day, and I never found a task or setup scenario it couldnt handle. Comes with the Audyssey setup mic for automatic sound leveling, time delay, and equalization. Please note that the HDMI card on this receiver is NOT WORKING. Actually I think that either the HDMI input or output might be working, but not both. I havent had it plugged in for a couple of years. Other than HDMI, I believe the receiver works as intended. It has had the repair done to fix the front display, so it can be used without a TV. It has a total of 5 digital audio inputs (2 optical and 3 coaxial), so you can still get digital surround sound from your TV, Blu-ray, etc. Also has a multitude of analog audio inputs for CD player, computer, etc. This receiver sounded GREAT when I was using it. Hugely powerful. Very customizable. You can assign the various digital inputs to the source name that you prefer.

For sale is a used Onkyo TX-SR875 receiver. This was the top of the line in its day, and I never found a task or setup scenario it couldnt handle. Comes with the Audyssey setup mic for automatic sound leveling, time delay, and equalization. Please note that the HDMI card on this receiver is NOT WORKING. Actually I think that either the HDMI input or output might be working, but not both. I havent had it plugged in for a couple of years. Other than HDMI, I believe the receiver works as intended. It has had the repair done to fix the front display, so it can be used without a TV. It has a total of 5 digital audio inputs (2 optical and 3 coaxial), so you can still get digital surround sound from your TV, Blu-ray, etc. Also has a multitude of analog audio inputs for CD player, computer, etc. This receiver sounded GREAT when I was using it. Hugely powerful. Very customizable. You can assign the various digital inputs to the source name that you prefer.

For sale is a used Onkyo TX-SR875 receiver. This was the top of the line in its day, and I never found a task or setup scenario it couldnt handle. Comes with the Audyssey setup mic for automatic sound leveling, time delay, and equalization. Please note that the HDMI card on this receiver is NOT WORKING. Actually I think that either the HDMI input or output might be working, but not both. I havent had it plugged in for a couple of years. Other than HDMI, I believe the receiver works as intended. It has had the repair done to fix the front display, so it can be used without a TV. It has a total of 5 digital audio inputs (2 optical and 3 coaxial), so you can still get digital surround sound from your TV, Blu-ray, etc. Also has a multitude of analog audio inputs for CD player, computer, etc. This receiver sounded GREAT when I was using it. Hugely powerful. Very customizable. You can assign the various digital inputs to the source name that you prefer.

For sale is a used Onkyo TX-SR875 receiver. This was the top of the line in its day, and I never found a task or setup scenario it couldnt handle. Comes with the Audyssey setup mic for automatic sound leveling, time delay, and equalization. Please note that the HDMI card on this receiver is NOT WORKING. Actually I think that either the HDMI input or output might be working, but not both. I havent had it plugged in for a couple of years. Other than HDMI, I believe the receiver works as intended. It has had the repair done to fix the front display, so it can be used without a TV. It has a total of 5 digital audio inputs (2 optical and 3 coaxial), so you can still get digital surround sound from your TV, Blu-ray, etc. Also has a multitude of analog audio inputs for CD player, computer, etc. This receiver sounded GREAT when I was using it. Hugely powerful. Very customizable. You can assign the various digital inputs to the source name that you prefer.

For sale is a used Onkyo TX-SR875 receiver. This was the top of the line in its day, and I never found a task or setup scenario it couldnt handle. Comes with the Audyssey setup mic for automatic sound leveling, time delay, and equalization. Please note that the HDMI card on this receiver is NOT WORKING. Actually I think that either the HDMI input or output might be working, but not both. I havent had it plugged in for a couple of years. Other than HDMI, I believe the receiver works as intended. It has had the repair done to fix the front display, so it can be used without a TV. It has a total of 5 digital audio inputs (2 optical and 3 coaxial), so you can still get digital surround sound from your TV, Blu-ray, etc. Also has a multitude of analog audio inputs for CD player, computer, etc. This receiver sounded GREAT when I was using it. Hugely powerful. Very customizable. You can assign the various digital inputs to the source name that you prefer.

For sale is a used Onkyo TX-SR875 receiver. This was the top of the line in its day, and I never found a task or setup scenario it couldnt handle. Comes with the Audyssey setup mic for automatic sound leveling, time delay, and equalization. Please note that the HDMI card on this receiver is NOT WORKING. Actually I think that either the HDMI input or output might be working, but not both. I havent had it plugged in for a couple of years. Other than HDMI, I believe the receiver works as intended. It has had the repair done to fix the front display, so it can be used without a TV. It has a total of 5 digital audio inputs (2 optical and 3 coaxial), so you can still get digital surround sound from your TV, Blu-ray, etc. Also has a multitude of analog audio inputs for CD player, computer, etc. This receiver sounded GREAT when I was using it. Hugely powerful. Very customizable. You can assign the various digital inputs to the source name that you prefer.

For sale is a used Onkyo TX-SR875 receiver. This was the top of the line in its day, and I never found a task or setup scenario it couldnt handle. Comes with the Audyssey setup mic for automatic sound leveling, time delay, and equalization. Please note that the HDMI card on this receiver is NOT WORKING. Actually I think that either the HDMI input or output might be working, but not both. I havent had it plugged in for a couple of years. Other than HDMI, I believe the receiver works as intended. It has had the repair done to fix the front display, so it can be used without a TV. It has a total of 5 digital audio inputs (2 optical and 3 coaxial), so you can still get digital surround sound from your TV, Blu-ray, etc. Also has a multitude of analog audio inputs for CD player, computer, etc. This receiver sounded GREAT when I was using it. Hugely powerful. Very customizable. You can assign the various digital inputs to the source name that you prefer.

For sale is a used Onkyo TX-SR875 receiver. This was the top of the line in its day, and I never found a task or setup scenario it couldnt handle. Comes with the Audyssey setup mic for automatic sound leveling, time delay, and equalization. Please note that the HDMI card on this receiver is NOT WORKING. Actually I think that either the HDMI input or output might be working, but not both. I havent had it plugged in for a couple of years. Other than HDMI, I believe the receiver works as intended. It has had the repair done to fix the front display, so it can be used without a TV. It has a total of 5 digital audio inputs (2 optical and 3 coaxial), so you can still get digital surround sound from your TV, Blu-ray, etc. Also has a multitude of analog audio inputs for CD player, computer, etc. This receiver sounded GREAT when I was using it. Hugely powerful. Very customizable. You can assign the various digital inputs to the source name that you prefer.

For sale is a used Onkyo TX-SR875 receiver. This was the top of the line in its day, and I never found a task or setup scenario it couldnt handle. Comes with the Audyssey setup mic for automatic sound leveling, time delay, and equalization. Please note that the HDMI card on this receiver is NOT WORKING. Actually I think that either the HDMI input or output might be working, but not both. I havent had it plugged in for a couple of years. Other than HDMI, I believe the receiver works as intended. It has had the repair done to fix the front display, so it can be used without a TV. It has a total of 5 digital audio inputs (2 optical and 3 coaxial), so you can still get digital surround sound from your TV, Blu-ray, etc. Also has a multitude of analog audio inputs for CD player, computer, etc. This receiver sounded GREAT when I was using it. Hugely powerful. Very customizable. You can assign the various digital inputs to the source name that you prefer.

Panasonic SA-HT8OOV Home Theater Sound System DVD/VCR Combo No Remote *see note. Pre-owned. Selling as for parts. Vhs and DVD play and function. Record function not tested. Unable to test with speakers so not sure if the volume knob works or not. Some scratches on case. Please see pictures for details.

Nice & Rare Five Star ***** 6087 / 5Y3-WGTY GE tube. Used & Tested on a MILITARY TV 7- D/U Calibrated by Dan Nelson. From a collection of an avid audio man. Check out other auctions for tubes from this mans estate.

Nice & Rare Five Star ***** 6087 / 5Y3-WGTY GE tube. Used & Tested on a MILITARY TV 7- D/U Calibrated by Dan Nelson. From a collection of an avid audio man. Check out other auctions for tubes from this mans estate.

Panasonic SA-HT8OOV Home Theater Sound System DVD/VCR Combo No Remote *see note. Pre-owned. Selling as for parts. Vhs and DVD play and function. Record function not tested. Unable to test with speakers so not sure if the volume knob works or not. Some scratches on case. Please see pictures for details.

For sale a rare and superb EAT C-Sharp turntable with C-Note tonearm and. In excellent condition with external Never Connected type power supply. This would be the last turntable you will ever need and an absolute bargain at this price. See full specification below. Look up the reviews this is a high end turntable, easy to set up and use and sounds fantastic. Also a blue tinted acrylic cover which on its own retails for nearly £500. Current price for the turntable is £3,398. The turntable is in its original box. CARTRIDGE NOT INCLUDED. Will not post, can be collected from North Kent or I can deliver almost anywhere around M25 or in SE for fuel cost. This is a rare bargain, only selling as I need to downsize my system. Thanks to new materials like Carbon Fibre and Termoplastic Elastomer EAT was designing a new superflat table. E.A.T C-Sharp turntable E.A.T , leaded by Jozefina Lichtenegger, a lady with distinct for elegance and design, went into the turntable business with completely new approach . High End turntables get big,massy and bulky close to phallic. When the technical design goes into extrem! European Audio Team wants to offer tables with the maximum of technology and Performance but still elegant looking. The Forte and Forte S with their special designed superlative heavy platter have been a revolution in the Highend AudioMarket . Never a turntable combined such Kinetic energie in such elegant products. Later the E-Flat topped the concept with the first unseeable super falt highend platter in a wonderfull mass loaded dual Motor Design. The success of the E-Flat motivated EAT to bring an even more elegant and slim turntable to the market. The C- SHARP Thanks to new materials like Carbon Fibre and Termoplastic Elastomer Eat was designing a new superflat table. The low profil base chassis is made out of highest density MDF. Because of its flatness this base sits perfectly stable on any surface! On this base the ultra low noise motor is mounted as well as 10 damping feets out of energy absorbing TPE (Termoplastic Elastomers = Hightech high energy absorbing damping material). The cone shape TPE columns carry a SANDWICH subchassis out of Carbon Fibre and MDF composite with ultimate rigidity. The stiffness is important to be a super rigid base for the tonearm/cartridge and bearing/platter as there must be 100 % no moving tolerance between the distance of the groove and the tracking cartridge. All the rumble of the platter / bearing is directed in the TPE columns. On opposite the TPE avoid that any unwanted energie of motor and surface or surrounding vibration leads to the subchassis or even to the tonearm cartridge. The bearing is an oversized inverted with a inert, resonance free ceramic ball on top Around the bearing we set a super heavy 700g mass point which sucks up all energy arround.The stiff carbon subchassis helps to transport all vibration in this mass point. So vibrations are transferred in heat The platter intself is from a special alloy of very inert aluminium and is also damped by TPE inserts-It from 2 parts a subplatter and a mainplatter to keep it flat although having very high mass and kinetic energie. The belt is made from special anti-static rubber. Its glued and then polished. The tonearm itself is a completely new design which combines all advantages of a unipivot arm with a cardan design. The uni-pivot in the middle only helps bearing to be less loaded. The traditional Cardan bearing insures high stabilty and easy ness of use with very low friction. Also inside the tonearm is a special silicon-based grease to damp the tonearm / cartridge resonances by more then 50% The tube is again out of carbon , super stiff and rigid. The headshell we made out of special light and rigid aluminium to get a perfect combination of the advantages of carbon with the better inner damping of the aluminium as well as the possibility of more tighter mounting of Highend MC cartridges. An external DC powersupply unit with an AC Generator creates new total clean power for the motors . For sure you have also 33 /45 electronic switching. A HIGHEND solution as the whole table. EAT C-SHARP TURNTABLE TECHNICAL INFORMATIONMODELEAT C-Sharp turntableNOMINAL SPEED33/45 rpm, driven by microprocessor, separate control panel, lighted control buttonsSPEED VARIANCE33 rpm: ± < 0,08%, 45 rpm: ± < 0,09%SIGNAL TO NOISES/N Ratio ( mechanical noise): – 40 dB, Signal to noise (electrical noise): -70 dBDOWNFORCE RANGE0 – 30 mNSUPPLIED COUNTERWEIGHTSwithout additional insert =>for cartridge 5 – 9g (125g), with additional insert =>for cartridge 8,5 – 13g(142g)EFFECTIVE TONEARM MASS16.5 gEFFECTIVE TONEARM LENGHT254 mmOVERHANG16 mmPOWER CONSUMPTION8,5 W max / 0,5 W stanbyVOLTAGEUniversal swith mode power supply 15 V DC / 1,6 A, 90-264 V AC, 47 – 63HzDIMENSIONS (W × H × D)500 × 400 × 115mm without connectors, 500 × 435 × 115mm with connectors in the rear panelWEIGHT (WITHOUT BOX)13,5 kg + 0,5 kg Separated control panel

For sale a rare and superb EAT C-Sharp turntable with C-Note tonearm and. In excellent condition with external Never Connected type power supply. This would be the last turntable you will ever need and an absolute bargain at this price. See full specification below. Look up the reviews this is a high end turntable, easy to set up and use and sounds fantastic. Also a blue tinted acrylic cover which on its own retails for nearly £500. Current price for the turntable is £3,398. The turntable is in its original box. CARTRIDGE NOT INCLUDED. Will not post, can be collected from North Kent or I can deliver almost anywhere around M25 or in SE for fuel cost. This is a rare bargain, only selling as I need to downsize my system. Thanks to new materials like Carbon Fibre and Termoplastic Elastomer EAT was designing a new superflat table. E.A.T C-Sharp turntable E.A.T , leaded by Jozefina Lichtenegger, a lady with distinct for elegance and design, went into the turntable business with completely new approach . High End turntables get big,massy and bulky close to phallic. When the technical design goes into extrem! European Audio Team wants to offer tables with the maximum of technology and Performance but still elegant looking. The Forte and Forte S with their special designed superlative heavy platter have been a revolution in the Highend AudioMarket . Never a turntable combined such Kinetic energie in such elegant products. Later the E-Flat topped the concept with the first unseeable super falt highend platter in a wonderfull mass loaded dual Motor Design. The success of the E-Flat motivated EAT to bring an even more elegant and slim turntable to the market. The C- SHARP Thanks to new materials like Carbon Fibre and Termoplastic Elastomer Eat was designing a new superflat table. The low profil base chassis is made out of highest density MDF. Because of its flatness this base sits perfectly stable on any surface! On this base the ultra low noise motor is mounted as well as 10 damping feets out of energy absorbing TPE (Termoplastic Elastomers = Hightech high energy absorbing damping material). The cone shape TPE columns carry a SANDWICH subchassis out of Carbon Fibre and MDF composite with ultimate rigidity. The stiffness is important to be a super rigid base for the tonearm/cartridge and bearing/platter as there must be 100 % no moving tolerance between the distance of the groove and the tracking cartridge. All the rumble of the platter / bearing is directed in the TPE columns. On opposite the TPE avoid that any unwanted energie of motor and surface or surrounding vibration leads to the subchassis or even to the tonearm cartridge. The bearing is an oversized inverted with a inert, resonance free ceramic ball on top Around the bearing we set a super heavy 700g mass point which sucks up all energy arround.The stiff carbon subchassis helps to transport all vibration in this mass point. So vibrations are transferred in heat The platter intself is from a special alloy of very inert aluminium and is also damped by TPE inserts-It from 2 parts a subplatter and a mainplatter to keep it flat although having very high mass and kinetic energie. The belt is made from special anti-static rubber. Its glued and then polished. The tonearm itself is a completely new design which combines all advantages of a unipivot arm with a cardan design. The uni-pivot in the middle only helps bearing to be less loaded. The traditional Cardan bearing insures high stabilty and easy ness of use with very low friction. Also inside the tonearm is a special silicon-based grease to damp the tonearm / cartridge resonances by more then 50% The tube is again out of carbon , super stiff and rigid. The headshell we made out of special light and rigid aluminium to get a perfect combination of the advantages of carbon with the better inner damping of the aluminium as well as the possibility of more tighter mounting of Highend MC cartridges. An external DC powersupply unit with an AC Generator creates new total clean power for the motors . For sure you have also 33 /45 electronic switching. A HIGHEND solution as the whole table. EAT C-SHARP TURNTABLE TECHNICAL INFORMATIONMODELEAT C-Sharp turntableNOMINAL SPEED33/45 rpm, driven by microprocessor, separate control panel, lighted control buttonsSPEED VARIANCE33 rpm: ± < 0,08%, 45 rpm: ± < 0,09%SIGNAL TO NOISES/N Ratio ( mechanical noise): – 40 dB, Signal to noise (electrical noise): -70 dBDOWNFORCE RANGE0 – 30 mNSUPPLIED COUNTERWEIGHTSwithout additional insert =>for cartridge 5 – 9g (125g), with additional insert =>for cartridge 8,5 – 13g(142g)EFFECTIVE TONEARM MASS16.5 gEFFECTIVE TONEARM LENGHT254 mmOVERHANG16 mmPOWER CONSUMPTION8,5 W max / 0,5 W stanbyVOLTAGEUniversal swith mode power supply 15 V DC / 1,6 A, 90-264 V AC, 47 – 63HzDIMENSIONS (W × H × D)500 × 400 × 115mm without connectors, 500 × 435 × 115mm with connectors in the rear panelWEIGHT (WITHOUT BOX)13,5 kg + 0,5 kg Separated control panel

For sale a rare and superb EAT C-Sharp turntable with C-Note tonearm and. In excellent condition with external Never Connected type power supply. This would be the last turntable you will ever need and an absolute bargain at this price. See full specification below. Look up the reviews this is a high end turntable, easy to set up and use and sounds fantastic. Also a blue tinted acrylic cover which on its own retails for nearly £500. Current price for the turntable is £3,398. The turntable is in its original box. CARTRIDGE NOT INCLUDED. Will not post, can be collected from North Kent or I can deliver almost anywhere around M25 or in SE for fuel cost. This is a rare bargain, only selling as I need to downsize my system. Thanks to new materials like Carbon Fibre and Termoplastic Elastomer EAT was designing a new superflat table. E.A.T C-Sharp turntable E.A.T , leaded by Jozefina Lichtenegger, a lady with distinct for elegance and design, went into the turntable business with completely new approach . High End turntables get big,massy and bulky close to phallic. When the technical design goes into extrem! European Audio Team wants to offer tables with the maximum of technology and Performance but still elegant looking. The Forte and Forte S with their special designed superlative heavy platter have been a revolution in the Highend AudioMarket . Never a turntable combined such Kinetic energie in such elegant products. Later the E-Flat topped the concept with the first unseeable super falt highend platter in a wonderfull mass loaded dual Motor Design. The success of the E-Flat motivated EAT to bring an even more elegant and slim turntable to the market. The C- SHARP Thanks to new materials like Carbon Fibre and Termoplastic Elastomer Eat was designing a new superflat table. The low profil base chassis is made out of highest density MDF. Because of its flatness this base sits perfectly stable on any surface! On this base the ultra low noise motor is mounted as well as 10 damping feets out of energy absorbing TPE (Termoplastic Elastomers = Hightech high energy absorbing damping material). The cone shape TPE columns carry a SANDWICH subchassis out of Carbon Fibre and MDF composite with ultimate rigidity. The stiffness is important to be a super rigid base for the tonearm/cartridge and bearing/platter as there must be 100 % no moving tolerance between the distance of the groove and the tracking cartridge. All the rumble of the platter / bearing is directed in the TPE columns. On opposite the TPE avoid that any unwanted energie of motor and surface or surrounding vibration leads to the subchassis or even to the tonearm cartridge. The bearing is an oversized inverted with a inert, resonance free ceramic ball on top Around the bearing we set a super heavy 700g mass point which sucks up all energy arround.The stiff carbon subchassis helps to transport all vibration in this mass point. So vibrations are transferred in heat The platter intself is from a special alloy of very inert aluminium and is also damped by TPE inserts-It from 2 parts a subplatter and a mainplatter to keep it flat although having very high mass and kinetic energie. The belt is made from special anti-static rubber. Its glued and then polished. The tonearm itself is a completely new design which combines all advantages of a unipivot arm with a cardan design. The uni-pivot in the middle only helps bearing to be less loaded. The traditional Cardan bearing insures high stabilty and easy ness of use with very low friction. Also inside the tonearm is a special silicon-based grease to damp the tonearm / cartridge resonances by more then 50% The tube is again out of carbon , super stiff and rigid. The headshell we made out of special light and rigid aluminium to get a perfect combination of the advantages of carbon with the better inner damping of the aluminium as well as the possibility of more tighter mounting of Highend MC cartridges. An external DC powersupply unit with an AC Generator creates new total clean power for the motors . For sure you have also 33 /45 electronic switching. A HIGHEND solution as the whole table. EAT C-SHARP TURNTABLE TECHNICAL INFORMATIONMODELEAT C-Sharp turntableNOMINAL SPEED33/45 rpm, driven by microprocessor, separate control panel, lighted control buttonsSPEED VARIANCE33 rpm: ± < 0,08%, 45 rpm: ± < 0,09%SIGNAL TO NOISES/N Ratio ( mechanical noise): – 40 dB, Signal to noise (electrical noise): -70 dBDOWNFORCE RANGE0 – 30 mNSUPPLIED COUNTERWEIGHTSwithout additional insert =>for cartridge 5 – 9g (125g), with additional insert =>for cartridge 8,5 – 13g(142g)EFFECTIVE TONEARM MASS16.5 gEFFECTIVE TONEARM LENGHT254 mmOVERHANG16 mmPOWER CONSUMPTION8,5 W max / 0,5 W stanbyVOLTAGEUniversal swith mode power supply 15 V DC / 1,6 A, 90-264 V AC, 47 – 63HzDIMENSIONS (W × H × D)500 × 400 × 115mm without connectors, 500 × 435 × 115mm with connectors in the rear panelWEIGHT (WITHOUT BOX)13,5 kg + 0,5 kg Separated control panel

For sale a rare and superb EAT C-Sharp turntable with C-Note tonearm and. In excellent condition with external Never Connected type power supply. This would be the last turntable you will ever need and an absolute bargain at this price. See full specification below. Look up the reviews this is a high end turntable, easy to set up and use and sounds fantastic. Also a blue tinted acrylic cover which on its own retails for nearly £500. Current price for the turntable is £3,398. The turntable is in its original box. CARTRIDGE NOT INCLUDED. Will not post, can be collected from North Kent or I can deliver almost anywhere around M25 or in SE for fuel cost. This is a rare bargain, only selling as I need to downsize my system. Thanks to new materials like Carbon Fibre and Termoplastic Elastomer EAT was designing a new superflat table. E.A.T C-Sharp turntable E.A.T , leaded by Jozefina Lichtenegger, a lady with distinct for elegance and design, went into the turntable business with completely new approach . High End turntables get big,massy and bulky close to phallic. When the technical design goes into extrem! European Audio Team wants to offer tables with the maximum of technology and Performance but still elegant looking. The Forte and Forte S with their special designed superlative heavy platter have been a revolution in the Highend AudioMarket . Never a turntable combined such Kinetic energie in such elegant products. Later the E-Flat topped the concept with the first unseeable super falt highend platter in a wonderfull mass loaded dual Motor Design. The success of the E-Flat motivated EAT to bring an even more elegant and slim turntable to the market. The C- SHARP Thanks to new materials like Carbon Fibre and Termoplastic Elastomer Eat was designing a new superflat table. The low profil base chassis is made out of highest density MDF. Because of its flatness this base sits perfectly stable on any surface! On this base the ultra low noise motor is mounted as well as 10 damping feets out of energy absorbing TPE (Termoplastic Elastomers = Hightech high energy absorbing damping material). The cone shape TPE columns carry a SANDWICH subchassis out of Carbon Fibre and MDF composite with ultimate rigidity. The stiffness is important to be a super rigid base for the tonearm/cartridge and bearing/platter as there must be 100 % no moving tolerance between the distance of the groove and the tracking cartridge. All the rumble of the platter / bearing is directed in the TPE columns. On opposite the TPE avoid that any unwanted energie of motor and surface or surrounding vibration leads to the subchassis or even to the tonearm cartridge. The bearing is an oversized inverted with a inert, resonance free ceramic ball on top Around the bearing we set a super heavy 700g mass point which sucks up all energy arround.The stiff carbon subchassis helps to transport all vibration in this mass point. So vibrations are transferred in heat The platter intself is from a special alloy of very inert aluminium and is also damped by TPE inserts-It from 2 parts a subplatter and a mainplatter to keep it flat although having very high mass and kinetic energie. The belt is made from special anti-static rubber. Its glued and then polished. The tonearm itself is a completely new design which combines all advantages of a unipivot arm with a cardan design. The uni-pivot in the middle only helps bearing to be less loaded. The traditional Cardan bearing insures high stabilty and easy ness of use with very low friction. Also inside the tonearm is a special silicon-based grease to damp the tonearm / cartridge resonances by more then 50% The tube is again out of carbon , super stiff and rigid. The headshell we made out of special light and rigid aluminium to get a perfect combination of the advantages of carbon with the better inner damping of the aluminium as well as the possibility of more tighter mounting of Highend MC cartridges. An external DC powersupply unit with an AC Generator creates new total clean power for the motors . For sure you have also 33 /45 electronic switching. A HIGHEND solution as the whole table. EAT C-SHARP TURNTABLE TECHNICAL INFORMATIONMODELEAT C-Sharp turntableNOMINAL SPEED33/45 rpm, driven by microprocessor, separate control panel, lighted control buttonsSPEED VARIANCE33 rpm: ± < 0,08%, 45 rpm: ± < 0,09%SIGNAL TO NOISES/N Ratio ( mechanical noise): – 40 dB, Signal to noise (electrical noise): -70 dBDOWNFORCE RANGE0 – 30 mNSUPPLIED COUNTERWEIGHTSwithout additional insert =>for cartridge 5 – 9g (125g), with additional insert =>for cartridge 8,5 – 13g(142g)EFFECTIVE TONEARM MASS16.5 gEFFECTIVE TONEARM LENGHT254 mmOVERHANG16 mmPOWER CONSUMPTION8,5 W max / 0,5 W stanbyVOLTAGEUniversal swith mode power supply 15 V DC / 1,6 A, 90-264 V AC, 47 – 63HzDIMENSIONS (W × H × D)500 × 400 × 115mm without connectors, 500 × 435 × 115mm with connectors in the rear panelWEIGHT (WITHOUT BOX)13,5 kg + 0,5 kg Separated control panel