The item is being listed for parts only. The items were palletized at the installation location and there was saltwater infiltration into the bottom of the pallets. Barco would not install or test the unit. Buyer will need to pick the two pallets up at our warehouse located in Sprague, Connecticut. PRICE IS FIRM Technical Specifications:-Resolution: 4K (4,096 x 2,160 px @ 60hz) -Display technology: DLP - 1.38” three chip DMDTM -Housing: Sealed DMDs and optical assembly -Input compatibility: up to 4K (4,096 x 2,160) -Light output: Up to 15,000 ANSI lumens Contrast 1,000 : 1 ANSI -Contrast: (w/WHC Lens) / 6,000 :1 On/Off contrast -Light engine 6P RGB Laser -Light source life time 30,000 hours or more, replaceable illumination -Lenses 1.13 - 1.72 : 1 4K-VHC LNS 1.35 - 1.86 : 1 4K-VHC LNS or DC4K HC 1.46 - 2.10 : 1 4K-VHC LNS or DC4K HC 1.65 - 2.60 : 1 4K-VHC LNS or DC4K HC 2.00 - 3.35 : 1 4K-VHC LNS or DC4K HC -Lens shift range Up to 25% Vertical and 15% Horizontal -Inputs Barco Alchemy ICMP included in the projector: 2x HDMI2.0a (up to 4K 2D 60fps) JPEG2000 2K & 4K DCI play-out High Frame Rates -3D up to 120fps (60fps per eye) 2x 3G-SDI inputs 16x AES/EBU audio channels (2x RJ45) 3D Color3D (Barco Laser3D): Native 6-primary color-3D system. Only requires color filter glasses (Dolby3D glasses cannot be reused) Active glasses systems Polarization recuperation systems -Control TCP/IP, 8 x GPIO, RS232 -Dimensions Projector: 744 x 1,446* x 706 mm / 29.3 x 56.9 x 27.8 inches (with feet, no lens) Chiller with the following dimensions: 701 x 701 x 800 mm / 27.6 x 27.6 x 31.5 inches -Weight Projector: 200kg (~440lb), Chiller: ~115kg (~250lb) -Power requirements Projector: 200 - 240 / 346 - 415 V 50 - 60 Hz 16A 3W+N+PE (Y connection) Power cord size range: 4 sq mm to 6 sq mm, 10AWG to 8AWG Circuit breaker range: 25A to 40A Chiller: 230 / 400V 3W+N+PE 16A 2.5 sq mm (Y connection) or 208V / 3W+PE (delta connection) Max. 16A per phase -Power consumption Projector @ full laser power: 3.5 kW (2D or Polarization D) / 2.0 kW (Barco Laser3D - 6P) Chiller @ full laser power: 2.0 kW (2D or Polarization 3D) / 1.6 kW (Barco Laser3D - 6P) -BTU per hour 18,500 BT/U Noise level (typical at 25°C/77°F) TBD -Operating temperature 30°C (86°F) Max. (projector and chillers) -Operating humidity 75% Max. (projector and chillers)