THIS SMALL FOOT PRINT POWER AMPLIFIER IS RARE AVAILABLE FOR SALE !THIS UNIT IS FULLY FUNCTIONAL AND IN GOOD CONDITION AS PHOTOS SHOWN. (Retail new $799) The M-PWR is a good, solid performer. It might not be the last word in finesse or fluidity, but would still work well in the right system. ---What Hi-FiPros+Small dimensions, large sound+Delivers larger dynamics, higher volume and more punch than size suggests+Clean presentation General SpecBrandAudiolabNumber Of ChannelsStereoFrequency Response20 Hz - 20 kHzWatts RMS per Channel (4 ?)60 WattsWatts RMS per Channel (8 ?)40 WattsInput Sensitivity600 mV (RCA Line in)Input Impedance10 k? (Balanced) | 20 k? (UnbalancedMinimum Impedance10 k?Signal-to-Noise Ratio106 dBTotal Harmonic Distortion (THD)0.05 %XLR Input1 PairRCA Input1 Pair Product Dimension (H×W×D) mm114 x 246.5 x 252 mmProduct Weight (Kg)4.7 Kg

AUDIOLAB M-PWR STEREO POWER AMPLIFIER - FREE SHIPPING We are pleased to offer this Audiolab M-PWR Stereo Power Amplifier. It is in good pre-owned condition showing light cosmetic wear. It is in perfect working order.   Specs:   Signal Inputs: RCA analog input, XLR balance analog input   Signal Output: Loudspeaker output   Operating Features: Ultra low noise gain circuit, Optimized for low distortion, output short protection, high temperature protection Listing and template services provided by inkFrog

Audiolab M-PWR Power Amplifier. 4 Star What HiFi Reviewed..

Fully functional and in used condition, with some marks to the case. Rubber feet have been replaced. An IEC power cable with UK plug will be supplied. What HiFi review (July 2013). The Audiolab M-PWR power amp makes perfect sense for Audiolab. The company also makes two DACs – the Q-DAC and M-DAC – and a CD player/preamp, all with variable outputs, so the addition of a stand-alone power amplifier at a sensible price provides an obvious partner. But don’t discount the M-PWR if you don’t have an Audiolab system: it’s quite happy working with a wide range of preamps and partnering kit. Design The M-PWR is a 40W-per-channel chunky half-width design, which visually matches the two DACs perfectly. It has both balanced and single-ended inputs, and works well through both. Build quality is solid enough for the money, but there’s not quite the slickness of finish that we’ve found in Audiolab’s M-DAC, integrated amps or CD players. Performance We used the M-PWR with both its natural Audiolab partners and our Bryston BP26 preamp with good results. Despite a modest power rating this is a powerful sounding amplifier. Using our reference ATC SCM50 speakers along with KEF’s LS50 stand-mounters the amplifier had no trouble delivering high volume levels. It coped with the dynamic swings of John Williams’ Theme from Jurassic Park with ease, delivering crisp detail and clean, punchy transients. The amplifier’s stereo imaging is pleasingly stable too, even as volume levels rise, and the M-PWR’s bass is delivered with pleasing authority. Specifications Power output: 40 watts per channel into 8? (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.05% Input sensitivity: 0.6V Signal to noise ratio: 106dB Speaker load impedance: 4? (minimum) Dimensions: 246.5 x 114 x 252mm Weight: 4.7kg [eBay code: HJ 112 TY]

Audiolab M-PWR Power Amplifier Boxed (Perfect for M-DAC). I have another one of these in my other listings, very good condition with original box. Original box and manual. Audiolab M-PWR Power Amplifier with XLR and RCA inputs. Light marking on the upper surface but otherwise undamaged. Rated Output Power 40W 8 ohms/60W 4 ohms Total Harmonic Distortion <0.008% (10W 1kHz)<0.05% (10W, 20Hz-20kHz) Frequency Response -0.5dB (20Hz-20kHz, ref.1KHz) Input Sensitivity 600mV (RCA line in) Input Impedance 10Kohms (Balanced); 20Kohms(Unbalanced) Signal to Noise Ratio (S/N) 106dB (A Weighted,ref. 40W) Dimension (W x H x D) 246.5 x 114 x 252 (mm) Net Weight 4.7kg A copy of the manual can be found here: https://www.audio-supply.com/wp-content/uploads/2015/03/M-PWR-Manual-Eng.pdf Tracked and fully insured delivery

Audiolab M-PWR Power Amplifier Boxed (Perfect for M-DAC). Very good condition with all accessories and documentation. See my other listings for Audiolab R DAC

Audiolab M-PWR Power Amplifier (Perfect for M-DAC). This is a great little amp which would be perfectly paired with the Audio Lab M-Dac range.

For sale is a great condition Audiolab M-PWR power amp. I have been using this with a Bel Canto Preamp and another M-PWR (see other listings) and it’s a really capable amp boasting 40w per channel. What hifi review below. Can use XLR or RCA connections. Perfect for the Audiolab M-DAC (not included) or any other pre-amp . Comes with manual and power chord. 1 of 2 will combine shipping if both bought. Will ship fully insured special delivery package well. https://www.whathifi.com/audiolab/m-pwr/review

Audiolab M-PWR Power Amplifier with XLR and RCA inputs. Light marking on the upper surface but otherwise undamaged. Rated Output Power 40W 8 ohms/60W 4 ohms Total Harmonic Distortion <0.008% (10W 1kHz)<0.05% (10W, 20Hz-20kHz) Frequency Response -0.5dB (20Hz-20kHz, ref.1KHz) Input Sensitivity 600mV (RCA line in) Input Impedance 10Kohms (Balanced); 20Kohms(Unbalanced) Signal to Noise Ratio (S/N) 106dB (A Weighted,ref. 40W) Dimension (W x H x D) 246.5 x 114 x 252 (mm) Net Weight 4.7kgA copy of the manual can be found here: https://www.audio-supply.com/wp-content/uploads/2015/03/M-PWR-Manual-Eng.pdf Tracked and fully insured delivery.

For sale is a great condition Audiolab M-PWR power amp. I have been using this with a Bel Canto Preamp and another M-PWR (see other listings) and it’s a really capable amp boasting 40w per channel. What hifi review below. Can use XLR or RCA connections Can use XLR or RCA connections. Perfect for the Audiolab M-DAC (not included) or any other pre-amp Comes with box, manual and power chord. 1 of 2 will combine shipping if both bought. Will ship fully insured special delivery https://www.whathifi.com/audiolab/m-pwr/review