This turntable has been my baby for the past several years, though now that I've added an actual, human baby to my life, as much as it pains me, it's time to say This turntable has been my baby for the past several years, though now that I've added an actual, human baby to my life, as much as it pains me, it's time to say goodbye. I truly milked every bit of performance out of this turntable with this package set up. Included is the turntable with original accessories, original manual and box. Also included in this ultimate package are: 1) ProJect Speed Box II (which allows for 33 or 45 rpm playback without changing the belt) - Retails for $200 https://www.audioadvisor.com/prsbs2-blk 2) A fancy upgraded 1 meter long Canare 48S DC power cable to connect the Speed Box to the turntable - Retails for $49: https://ghentaudio.com/products/dc-4s8g?VariantsId=11083,11106,11131 3) A Pro-Ject Acryl It Platter upgrade - Reails for $149: https://www.audioadvisor.com/pracrylit 4) An Ortofon 2M blue stylus upgrade - Retails for $159: https://www.audioadvisor.com/or2mblus 5) A set of MNPC TECH adjustable height, isolation turntable feet - Retails for $129.99 https://www.mnpctech.com/products/adjustable-height-pro-ject-audio-debut-carbon-turntable-isolation-feet-set-of-four All together, if purchased new, the whole package would run you over $1000. There are a couple of signs of use throughout, please see the pictures. The turntable functions excellently and sounds fantastic! There are three very minor flaws: 1) the pegs on the rear that hold the dust cover are held by two screws each, however the left peg on mine came with a single screw only.  This does not affect the function whatsoever.  2) The lift arm for the turntable is loose as a screw came free over the years.  The screw is included (it's in the bag with the anti-skate weight) but I haven't been able to get it back in as I believe I would need to remove the tonearm to access it.  This has a negligible effect on function - instead of stopping in the upright position (e.g. 90 degrees of motion), the lift arm can move a full 180 degrees which means the tone arm can be lowered with the lift arm facing forward or backward instead of just forward. 3) The faceplate with the scale for the counterweight is gone and so I use a digital tonearm balance to dial in the tracking force (which is definitely better than using the inaccurate counterweight faceplate). I will include the digital scale with the turntable.

Letters to build a super nice feature in your theater room. Paid well over 200.00 to have these cut and where a bit to long. Video at 3:12 shows the current one lit up. https://youtu.be/pCLIGdIJ8oI

ACR VHS Video Cassette Rewinder Model ACR-659A Open Box with original packaging. If it was used it was very lightly. I removed the item and tested it, and it did indeed rewind my movie. The box has some damage. Please review the pictures for the condition of the item as this is what will be shipped to you. Be Kind Rewind.

Gebraucht, bespielt. Versand nach Deutschland, ausser Inseln, als versichertes Paket. Abholung in 14612 Falkensee möglich

This turntable has been my baby for the past several years, though now that Ive added an actual, human baby to my life, as much as it pains me, its time to say goodbye. I truly milked every bit of performance out of this turntable with this package set up. Included is the turntable with all original accessories, original manual and box. Also included in this ultimate package are: 1) Speed Box II (which allows for 33 or 45 rpm playback without changing the belt) - Retails for $200 https://www.audioadvisor.com/prsbs2-blk 2) A fancy upgraded 1 meter long Canare 48S DC power cable to connect the Speed Box to the turntable - Retails for $49: https://ghentaudio.com/products/dc-4s8g?VariantsId=11083,11106,11131 3) A Pro-Ject Acryl It Platter upgrade - Reails for $149: https://www.audioadvisor.com/pracrylit 4) An Ortofon 2M blue stylus upgrade - Retails for $159: https://www.audioadvisor.com/or2mblus 5) A set of MNPC TECH adjustable height, isolation turntable feet - Retails for $129.99 https://www.mnpctech.com/products/adjustable-height-pro-ject-audio-debut-carbon-turntable-isolation-feet-set-of-four All together, if purchased new, the whole package would run you over $1000. There are a couple of signs of use throughout, please see the pictures. The turntable functions excellently and sounds fantastic! There are two very minor flaws: 1) the pegs on the rear that hold the dust cover are held by two screws each, however the left peg on mine came with a single screw only. This does not affect the function whatsoever. 2) The lift arm for the turntable is loose as a screw came free over the years. The screw is included (its in the bag with the anti-skate weight) but I havent been able to get it back in as I believe I would need to remove the tonearm to access it. This has a negligible effect on function - instead of stopping in the upright position (e.g. 90 degrees of motion), the lift arm can move a full 180 degrees which means the tone arm can be lowered with the lift arm facing forward or backward instead of just forward.

I found this instrument at a Pawn Shop in Frederick MD. I have a similar turntable in red so am familiar with it, and know what it should sound like.... 1. Turntable does NOT have a cue lever.2. Power supply included3. Serial Number 119201 My intention is NOT to double box this unit...rather i will slap a label on this box...and ship. Setup Guide https://uturnaudio.com/pages/orbit-setup NOTE: I have a red version of this turntable currently listed. It is more expensive, because it includes a higher end Ortofon stylus. $250 vs. $59 for the OM5E that is in this model.

Excellent Condition with no signs of use. Fast Shipping Quick Handling Here's an AntennaCraft Antenna Rotor Control Box Model TDP-2. It's been tested and works great. The box is black in color and has the brand name Antennacraft on it. It's compatible with UHF, VHF, FM, AM, Short Wave, and HAM bands. This control box is perfect for anyone who needs to rotate their antenna for better signal reception. It's a must-have for any TV, video, or audio enthusiast. Get yours today!

AntennaCraft Outdoor Antenna Rotor Control box only. Model TDP-2. Make sure the rotor box model number matches yours exactly. If its missing a letter in the model number or the numbers are not exact, then dont buy it. Item is used, functional and may have scratches, other stickers and markings. Dial clutch on control box may or may not stop unless you hold it, but it will turn rotor. Rotor not included.

Letters to build a super nice feature in your theater room. Paid well over 200.00 to have these cut and where a bit to long. Video at 3:12 shows the current one lit up. https://youtu.be/pCLIGdIJ8oI

This is for a Hannspree SACRAMENTO KINGS Basketball TV & MONITOR New in Box. Complete with Cables, Connections, Remote & Paperwork in Original Box. Desktop is 15in and looks to be unused. Original price was $499 as seen in photos. Email with any questions.

This is for a Hannspree SACRAMENTO KINGS Basketball TV & MONITOR New in Box. Complete with Cables, Connections, Remote & Paperwork in Original Box. Desktop is 15in and looks to be unused. Original price was $499 as seen in photos. Email with any questions.

This is for a Hannspree SACRAMENTO KINGS Basketball TV & MONITOR New in Box. Complete with Cables, Connections, Remote & Paperwork in Original Box. Desktop is 15in and looks to be unused. Original price was $499 as seen in photos. Email with any questions.