Used inner platter and bearing from a working Yamaha PF-800 turntable.

Original Außenteller Turntable Plate for Turntable Yamaha PF-800The description of this item has been automatically translated. If you have any questions, please feel free to contact us.outside plateOriginal Yamaha PF 800outside plate Original Yamaha PF 800 Herstellernummer nicht zutreffend Marke Yamaha Markenkompatibilität Yamaha Produktart Plattenteller EAN Nicht zutreffend

Original Hood Hinges for Turntable Yamaha PF-800The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Hood hingesOriginal Yamaha PF 800Hood hinges Original Yamaha PF 800 Herstellernummer nicht zutreffend Marke Yamaha Markenkompatibilität Yamaha Produktart Scharniere EAN Nicht zutreffend

Original Turntable Yamaha PF-800 Stainless Steel EditionThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)!Yamaha PF-800Semi-automatic with lift function and limit switchHeight-adjustable stainless steel feetNew Ortofon Vinyl Master AlphaNew RCA audio cable from Oehlbach (permanently installed)New strapWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: 14.4kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality, stable materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the recordThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood incl. Cartridge MM including installation: Ortofon 2M Blue (elliptical, naked): €219 Ortofon 2M Bronze (fine line): €360Ortofon Vinyl Master Silver (Fritz Gyger): €490Cartridge MC including installation:Quinted Bronze (fineline diamond cut): €640 Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Lift Adjust (lifting point of the tonearm can be adjusted at the end of the record The following Parts are as Accessoriesör erhäliltic and not component this auction: The following par Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Revised Turntable Yamaha PF-800 Black High Gloss With LED LightingThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Yamaha PF-800 black high gloss with LED lightingstainless steel editionSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable and power cable permanently installedOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: approx. 15kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the record)The following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test LED lighting:Allows you to set different colors and functions, dimmable, with remote controlPickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable stainless steel device feet are installed on the bottom of the housing.Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffer.Resonances and feedback are thus effectively prevented. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood including hinges: 190Cartridge MM system including installation:Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 220Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699Cartridge MC System including installation:Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799The high-quality housings are restored or newly manufactured using qualified craftsmanship. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable stainless steel device feet are installed on the bottom of the housing. Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffe Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Your Choice! Revised Turntable Yamaha PF-800 Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing and the cover plate yourself. Also possible in two colors!You can choose the color of the housing and the cover plate yourself. Two-tone also possible!Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Yamaha PF-800 in your desired colorstainless steel editionSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable from Oehlbach (permanently installed)Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: 13kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality, stable materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the recordThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:Painted in your desired color!The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing.Cover plate:The cover plate is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:Ortofon 2M Blue (elliptical, naked): €220Ortofon 2M Bronze (Fineline): €390Audio-Technica VM760SLC (special line contact): €699Cartridge MC System including installation:Audio-Technica AT33SA (Shibata): €799You can choose the color of the housing and the cover plate yourself. Also possible in two colors! With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. There are four height-adjustable ones on the bottom of the case SPIKES Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Revised Turntable Yamaha PF-800 Black High Gloss Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Yamaha PF-800 black high glossstainless steel editionSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable and power cable permanently installedOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: approx. 15kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the record)The following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable stainless steel device feet are installed on the bottom of the housing.Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffer.Resonances and feedback are thus effectively prevented. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood including hinges: 190Cartridge MM system including installation:Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 220Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699Cartridge MC System including installation:Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799The high-quality housings are restored or newly manufactured using qualified craftsmanship. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable stainless steel device feet are installed on the bottom of the housing. Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffe Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Original Innenteller With Bearings for Turntable Yamaha PF-800The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Inner plate with bearingOriginal Yamaha PF 800very good conditionInner plate with bearing Original Yamaha PF 800 very good condition Herstellernummer nicht zutreffend Marke Yamaha Markenkompatibilität Yamaha Produktart Plattenteller EAN Nicht zutreffend

Your Choice! Revised Turntable Yamaha PF-800 Gold EditionThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing and the cover plate yourself.You can choose the color of the housing and the cover plate yourself.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Yamaha PF-800 in your desired colorSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable from Oehlbach (permanently installed)Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: 13kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality, stable materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the recordThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:Painted in your desired color!The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing.Cover plate:The cover plate is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM system including installation:Audio-Technica VM740ML (microlinear): €339Audio-Technica VM750SH (Shibata): €439Audio-Technica VM760SLC (special line contact): €699 Cartridge MC System including installation: Audio-Technica AT33EV (elliptical): €499Audio-Technica ATPTG/II (microlinear): €599Audio-Technica AT33SA (Shibata): €799The high-quality housings are restored or newly manufactured using qualified craftsmanship. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. There are four height-adjustable ones on the bottom of the case SPIKES Instal Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Original Frame Casing for Yamaha PF-800 Turntable Lower Case PartThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original frame housing for Yamaha PF-800 turntable lower housing partTop condition, rubber feet are porous and partly tornOriginal frame housing for Yamaha PF-800 turntable lower housing part Top condition, rubber feet are porous and partly torn Herstellernummer nicht zutreffend Marke Yamaha Markenkompatibilität Yamaha Produktart Zarge EAN Nicht zutreffend

This is in excellent condition, it would be hard to find a flaw in the wood. Few light swirls and scratches on the cover. Cart “Mission 773” MC cart + the original MC cart If you don’t want the “Mission” cart I can refund 100$ I purchase this from the original owner and it has been cleaned and lubed since I have owned it. It has a brand new belt. Works flawlessly and has the auto end lift and turns the table off after the record is done. I have been using for about a year without issue Comes with the top hat, original box, MC Yamaha cart, new sealed belt. Solid build and weighs almost 30 lbs. You can see the original purchase price of $325 back in the 80s I am very familiar with shipping heavy vintage audio. Will be double boxed.

Original Frame Housing Panel Plate for Yamaha PF-800 TurntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original frame housing plate for Yamaha PF-800 turntable top conditionOriginal frame housing plate for Yamaha PF-800 turntable top condition Herstellernummer nicht zutreffend Marke Yamaha Markenkompatibilität Yamaha Produktart Zarge EAN Nicht zutreffend

Original Turntable Yamaha PF-800 Gold Edition Top ConditionThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.The phonograph works with 220V/50HzFor shipping to the USA the turntable is converted to 110V/60HzYamaha PF-800Semi-automatic with lift function and limit switchNew Ortofon Vinyl Master AlphaNew RCA audio cable from Oehlbach (permanently installed)New strap With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: 13kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality, stable materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the recordThe following Parts are as Accessoriesör erhäliltic and not component this auction:Hood incl. Cartridge MM systems including installation:Cartidge MC systems including installation:For shipping to the USA the turntable is converted to 110V/60Hz New RCA audio cable from Oehlbach (permanently installed) With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Turntable: main plate die-cast aluminum, sub-platter die-cast zinc Subchassis, mounted to swing freely on three conical springs Lift Adjust (lifting point of the tonearm can be adjusted at the end of the record The following Parts are as Accessoriesör erhäliltic and not component this aucti Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Used inner platter and bearing from a working Yamaha PF-800 turntable.

Revised Turntable Yamaha PF-800 Stainless Steel, Silver And BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay.This turntable is available in 220/230V or 110V/120V (for example USA and world wide).You can find even more interesting offers from us. Take a look at... Art and Sound Germany Yamaha PF-800 silver blueSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable and power cable permanently installedOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: approx. 15kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the record)The following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:The original housing is refurbished, the wooden structure is removed, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The spring caps are re-turned from full stainless steel and the old suspension is replaced with stronger suspension. Power cable and cinch cable are replaced.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood including hinges: 190LED lighting (see picture 4): 149XXL device feet made of stainless steel, height adjustable (see picture 2): 133Stainless steel control element (see picture 5): 179Cartridge MM system including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699Cartridge MC System including installation:Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799The original housing is refurbished, the wooden structure is removed, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The spring caps are re-turned from full stainless steel and the old suspension is replaced with stronger suspension. Power cable and cinch cable are replaced. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

See video of demonstrationhttps://youtube.com/shorts/s6tvTGAbMwo Great looking turntable, Pearl cartridge/stylus. The cue drops hard and does not lift very high— otherwise this unit looks and works great. Cover in great condition, no major scratches or scuffs. More pictures available. Same day shipping packed with Care selling on eBay since 1999. Local pick up welcome.On Jul-19-24 at 13:28:10 PDT, seller added the following information: video of cue issue https://youtube.com/shorts/s6tvTGAbMwo

unable to test belt is badneeds new belt cue worksspeed works start and stop works selling for parts or repair do to not being able to fully test please buy as is not working Includes cords shown only Offers welcomed Fast shipping If you have any questions feel free to askmessages sent saturday and sundaywill be answered monday morning If you are not satisfied with your purchase, we have an easy return policy to make our customers happy.please do not leave any negative feedbackgive us a chance to resolve the problem. Thanks for looking GSB4.tris