Revised Turntable Yamaha PF-800 Black High Gloss Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Yamaha PF-800 black high glossstainless steel editionSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable and power cable permanently installedOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: approx. 15kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the record)The following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable stainless steel device feet are installed on the bottom of the housing.Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffer.Resonances and feedback are thus effectively prevented. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood including hinges: 190Cartridge MM system including installation:Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 220Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699Cartridge MC System including installation:Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799The high-quality housings are restored or newly manufactured using qualified craftsmanship. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable stainless steel device feet are installed on the bottom of the housing. Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffe Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Used inner platter and bearing from a working Yamaha PF-800 turntable.

Yamaha Netzwerk Empfänger R-N800A Schwarz Das Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns. ZahlungSeien Sie versichert, dass unser Shop eine Vielzahl von Zahlungsmethoden anbietet.Bitte zahlen Sie innerhalb von 5 Tagen nach Auktionsende.Über unsWir sind in Japan ansässig. Überprüfen Sie bei elektrischen Produkten den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. Es ist uns eine Freude, Sie glücklich zu machen, indem wir Ihnen unseren empfohlenen Artikel vorschlagen.Wenn Sie Fragen oder Wünsche zu Artikeln haben, wenden Sie sich bitte an uns.Internationale Käufer – Bitte beachten Sie:-Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers.- Bitte erkundigen Sie sich vor dem Bieten/Kauf beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sein werden.-Diese Gebühren werden normalerweise von der ausliefernden Spedition (Versandfirma) erhoben oder wenn Sie den Artikel abholen – verwechseln Sie sie nicht mit zusätzlichen Versandkosten.-Wir kennzeichnen Warenwerte nicht unter dem Wert und kennzeichnen Artikel nicht als Geschenke. Die Vorschriften der US-amerikanischen und internationalen Regierung verbieten ein solches Verhalten.]]>Wir sind in Japan ansässig. Überprüfen Sie bei elektrischen Produkten den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. -Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers. -Diese Gebühren werden normalerweise von der ausliefernden Spedition (Versandfirma) erhoben oder wenn Sie den Artikel abholen – verwechseln Sie sie nicht mit zusätzlichen Versandkosten. -Wir kennzeichnen Warenwerte nicht unter dem Wert und kennzeichnen Artikel nicht als Geschenke. Die Vorschriften der US-amerikanischen und internationalen Regierung verbieten Brand Yamaha Country Japan Model NA Type NA Number of Channels NA Number of Inputs NA Number of Outputs NA Surround Sound Formats NA Audio Inputs NA Audio Outputs NA Band NA Supported Modes NA Color NA Receiver Combo Features NA Features NA Power NA MPN NA Unit Quantity NA Unit Type NA Amplifier Class NA Year Manufactured NA Country/Region of Manufacture NA Compatible Product NA California Prop 65 Warning NA Manufacturer Warranty NA UPC NA

Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Yamaha PF-800 black high glossstainless steel editionSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable and power cable permanently installedOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: approx. 15kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh quality materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the record)The following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable stainless steel device feet are installed on the bottom of the housing.Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffer.Resonances and feedback are thus effectively prevented. following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction:Hood including hinges: 190Cartridge MM system including installation:Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 220Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699Cartridge MC System including installation:Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799The high-quality housings are restored or newly manufactured using qualified craftsmanship. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable stainless steel device feet are installed on the bottom of the housing. Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffe

Your Choice! Revised Turntable Yamaha PF-800 Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing and the cover plate yourself. Also possible in two colors!You can choose the color of the housing and the cover plate yourself. Two-tone also possible!Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Yamaha PF-800 in your desired colorstainless steel editionSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable from Oehlbach (permanently installed)Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: 13kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality, stable materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the recordThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:Painted in your desired color!The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing.Cover plate:The cover plate is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:Ortofon 2M Blue (elliptical, naked): €220Ortofon 2M Bronze (Fineline): €390Audio-Technica VM760SLC (special line contact): €699Cartridge MC System including installation:Audio-Technica AT33SA (Shibata): €799You can choose the color of the housing and the cover plate yourself. Also possible in two colors! With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. There are four height-adjustable ones on the bottom of the case SPIKES Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Original Weight for Cartridge Yamaha PF-800 1000 Additional Distance PlatesThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original weight for cartridge Yamaha PF-800 / 1000 additional weight spacer platesMaterial: metallic, non-magneticOriginal weight for cartridge Yamaha PF-800 / 1000 additional weight spacer plates Material: metallic, non-magnetic Marke Yamaha Markenkompatibilität Yamaha PF-800 Produktart Distanzplättchen EAN Nicht zutreffend

Original Front Plate Front Panel Control Panel Yamaha - PF-800 With 2 CapsThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original front panel, control panel and 2 cover caps for the fastening screwsYamaha PF-800usedOriginal front panel, control panel and 2 cover caps for the fastening screws Yamaha PF-800 used Marke Yamaha Markenkompatibilität Für Yamaha Produktart Frontplatte EAN Nicht zutreffend

Revised Turntable Yamaha PF-800 Stainless Steel, Silver And BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay.This turntable is available in 220/230V or 110V/120V (for example USA and world wide).You can find even more interesting offers from us. Take a look at... Art and Sound Germany Yamaha PF-800 silver blueSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable and power cable permanently installedOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: approx. 15kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the record)The following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:The original housing is refurbished, the wooden structure is removed, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The spring caps are re-turned from full stainless steel and the old suspension is replaced with stronger suspension. Power cable and cinch cable are replaced.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood including hinges: 190LED lighting (see picture 4): 149XXL device feet made of stainless steel, height adjustable (see picture 2): 133Stainless steel control element (see picture 5): 179Cartridge MM system including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699Cartridge MC System including installation:Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799The original housing is refurbished, the wooden structure is removed, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The spring caps are re-turned from full stainless steel and the old suspension is replaced with stronger suspension. Power cable and cinch cable are replaced. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Used inner platter and bearing from a working Yamaha PF-800 turntable.

Hallo hier verkaufe ich eine Yamaha KX-800 voll funktionsfähig, die Anlage ist in einem guten gebrauchten zustand siehe fotos, Frontblende Aluminium,Rimen NEU, die anlage ist super eingepackt und wartet auf sein neuen besitzer. Video (YAMAHA KX-800) Das ist ein privatverkauf keine garantie und keine rücknahme.

Original Frame Casing for Yamaha PF-800 Turntable Lower Case PartThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original frame housing for Yamaha PF-800 turntable lower housing partTop condition, rubber feet are porous and partly tornOriginal frame housing for Yamaha PF-800 turntable lower housing part Top condition, rubber feet are porous and partly torn Herstellernummer nicht zutreffend Marke Yamaha Markenkompatibilität Yamaha Produktart Zarge EAN Nicht zutreffend

Original spring cap housing cover turntable Yamaha PF 800 1000 The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Original spring cap spring housing cover for suspensionfor record players Yamaha PF-800 and PF-1000as new Original spring cap spring housing cover for suspension for record players Yamaha PF-800 and PF-1000 as new See also this products: Stronger As The Original Springs Spring for Turntable Yamaha PF-800/1000 Original Innenteller With Bearings for Turntable Yamaha PF-800 Record Player Cover for Yamaha Pf 800 Hood Cover Dust Cover Turntable Record Player Cover for Yamaha PF-1000 Hood Cover Dust Cover Turntable Stronger Springs Spring & Weight 10.9oz for Turntable Yamaha PF-800/1000 Original Headshell Yamaha PF-800 PF-1000 with Cable 3 Caps Federkappen & Springs for Turntable Yamaha PF-800/1000 Stainless Steel Caps Platter Weight & Springs for Turntable Yamaha PF-800/1000 Stainless Steel Marke Yamaha Markenkompatibilität Für Thorens Markenkompatibilität Für Yamaha Herstellernummer nicht zutreffend Angebotspaket Nein Ausländisches Produkt Nein Modifizierter Artikel Nein Produktart Federkappe Herstellungsland und -region Deutschland EAN Nicht zutreffend

Used inner platter and bearing from a working Yamaha PF-800 turntable.

Revised Turntable Yamaha PF-800 Black High Gloss With LED LightingThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Yamaha PF-800 black high gloss with LED lightingstainless steel editionSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable and power cable permanently installedOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: approx. 15kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the record)The following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test LED lighting:Allows you to set different colors and functions, dimmable, with remote controlPickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable stainless steel device feet are installed on the bottom of the housing.Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffer.Resonances and feedback are thus effectively prevented. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood including hinges: 190Cartridge MM system including installation:Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 220Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699Cartridge MC System including installation:Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799The high-quality housings are restored or newly manufactured using qualified craftsmanship. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable stainless steel device feet are installed on the bottom of the housing. Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffe Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Original spring cap housing cover turntable Yamaha PF 800 1000 The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Original spring cap spring housing cover for suspensionfor record players Yamaha PF-800 and PF-1000as new Original spring cap spring housing cover for suspension for record players Yamaha PF-800 and PF-1000 as new See also this products: Stronger As The Original Springs Spring for Turntable Yamaha PF-800/1000 Original Innenteller With Bearings for Turntable Yamaha PF-800 Record Player Cover for Yamaha Pf 800 Hood Cover Dust Cover Turntable Record Player Cover for Yamaha PF-1000 Hood Cover Dust Cover Turntable Stronger Springs Spring & Weight 10.9oz for Turntable Yamaha PF-800/1000 Original Headshell Yamaha PF-800 PF-1000 with Cable 3 Caps Federkappen & Springs for Turntable Yamaha PF-800/1000 Stainless Steel Caps Platter Weight & Springs for Turntable Yamaha PF-800/1000 Stainless Steel Marke Yamaha Markenkompatibilität Für Thorens Markenkompatibilität Für Yamaha Herstellernummer nicht zutreffend Angebotspaket Nein Ausländisches Produkt Nein Modifizierter Artikel Nein Produktart Federkappe Herstellungsland und -region Deutschland EAN Nicht zutreffend

Original Turntable Yamaha PF-800 Stainless Steel EditionThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)!Yamaha PF-800Semi-automatic with lift function and limit switchHeight-adjustable stainless steel feetNew Ortofon Vinyl Master AlphaNew RCA audio cable from Oehlbach (permanently installed)New strapWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: 14.4kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality, stable materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the recordThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood incl. Cartridge MM including installation: Ortofon 2M Blue (elliptical, naked): €219 Ortofon 2M Bronze (fine line): €360Ortofon Vinyl Master Silver (Fritz Gyger): €490Cartridge MC including installation:Quinted Bronze (fineline diamond cut): €640 Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Lift Adjust (lifting point of the tonearm can be adjusted at the end of the record The following Parts are as Accessoriesör erhäliltic and not component this auction: The following par Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Used inner platter and bearing from a working Yamaha PF-800 turntable.

In excellent used condition as pictured.

In excellent used condition as pictured.

Revised Turntable Yamaha PF-800 Wurzelholzfurnier High GlossThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay.This turntable is available in 220/230V or 110V/120V (for example USA and world wide).You can find even more interesting offers from us. Take a look at... Art and Sound Germany We would also be happy to restore your record player to this look. Yamaha PF-800 with high gloss root wood veneer Normal 0 21 false false false DE X-NONE X-NONE Revision of electronic and mechanical components Conversion or Components required for installation Setting and adjusting the different speeds Setting and adjusting the suspension Checking and adjusting the tonearm and pickup  Thorough cleaning of the entire record player Execution of an endurance test Pickup (included): Ortofon OM5EThe Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback. Housing:The original housing is refurbished, veneered, pre-painted with several layers and intermediate sanding and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case bottom.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:Hood including hinges: 190Device feet made of stainless steel, Height adjustable, total weight 2520g, 65x25mm (Image 11): 120Stainless steel spring pots (picture 12): 99Spring pots and 320g plate weight made of stainless steel (picture 13): 120Stainless steel control element (Figure 14): 179Cartridge MM system including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899AUDIO-TECHNICA VM 95ML (Microlinear): 179 AUDIO-TECHNICA VM 95SH (Shibata): 219AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (Special Line Contact): 699Cartridge MC System including installation:AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799This turntable is available in 220/230V or 110V/120V (for example USA and world wide). You can find even more interesting offers from us. Take a look at... Art and Sound Germany The high-quality cases are restored or newly manufactured using skilled craftsmanship. The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback. The original housing is refurbished, veneered, pre-painted with several layers and intermediate sanding and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case bottom. Device feet made of stainless steel, Height adjustable, total weight 2520g, 65x25mm (Image Herstellernummer nicht zutreffend Marke Yamaha Modell PF-800 EAN Nicht zutreffend

Your Choice! Revised Turntable Yamaha PF-800 Gold EditionThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing and the cover plate yourself.You can choose the color of the housing and the cover plate yourself.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Yamaha PF-800 in your desired colorSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable from Oehlbach (permanently installed)Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: 13kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality, stable materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the recordThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:Painted in your desired color!The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing.Cover plate:The cover plate is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM system including installation:Audio-Technica VM740ML (microlinear): €339Audio-Technica VM750SH (Shibata): €439Audio-Technica VM760SLC (special line contact): €699 Cartridge MC System including installation: Audio-Technica AT33EV (elliptical): €499Audio-Technica ATPTG/II (microlinear): €599Audio-Technica AT33SA (Shibata): €799The high-quality housings are restored or newly manufactured using qualified craftsmanship. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. There are four height-adjustable ones on the bottom of the case SPIKES Instal Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Original Innenteller With Bearings for Turntable Yamaha PF-800The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Inner plate with bearingOriginal Yamaha PF 800very good conditionInner plate with bearing Original Yamaha PF 800 very good condition Herstellernummer nicht zutreffend Marke Yamaha Markenkompatibilität Yamaha Produktart Plattenteller EAN Nicht zutreffend

Revised Turntable Yamaha PF-800 Black High Gloss Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Yamaha PF-800 black high glossstainless steel editionSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable and power cable permanently installedOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: approx. 15kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the record)The following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable stainless steel device feet are installed on the bottom of the housing.Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffer.Resonances and feedback are thus effectively prevented. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood including hinges: 190Cartridge MM system including installation:Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 220Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699Cartridge MC System including installation:Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799The high-quality housings are restored or newly manufactured using qualified craftsmanship. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable stainless steel device feet are installed on the bottom of the housing. Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffe Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Im not expert on this nice Yamaha Turntable, all body is in very good vintage conditions,clear plastic top cover has light scratches,probably has light dusty but not to visible, see cables connections conditions. Please see all pictures for more details and conditions.