So I did not have a skinny or flat enough wrench to get the Pots off this faceplate assembly, plus each Pot has 3 set screws, so I am just selling these still attached to the faceplate. Both Pots are working, the right two screw holes on the Faceplate have chipped corners, but other 4 screw holes are good. I did have to snip wires but left plenty to work with. Please let me know if you have any questions and thanks for looking!

Board is in good working order with no damage, I did have to snip the wires but left you plenty to work with. Please note the last picture is just to show where these lights go, the faceplate is NOT included. Please let me know if you have any questions and thanks for looking!

Faceplate is in great condition with no damage. Please let me know if you have any questions and thanks for looking!

Switch is in good working order with no damage, I did have to snip wires to get it out but I left plenty to work with. Please let me know if you have any questions and thanks for looking!

Handles have some damage as you can see in the pics, but both are still usable. Decent replacements if yours are missing. Please let me know if you have any questions and thanks for looking!

Board is in good physical condition and working, although 3 of the bulbs are burned out and need replaced. I did have to snip the wires but I left plenty to work with. Please let me know if you have any questions and thanks for looking!

Caps are in good condition with no damage or swelling, these should have plenty of life left in them. Please let me know if you have any questions and thanks for looking!

Meter is in good working order with no damage, technically this is for the B channel, but it could be used for either channel. Please let me know if you have any questions and thanks for looking!

Meter is in good working order with no damage, technically this is for the A channel, but it could be used for either channel. Please let me know if you have any questions and thanks for looking!

This is the Right or Channel B amp board and is in good working order. I did have to snip some wires to get it out as you can see in the pictures, but I left plenty of wire to work with. Please let me know if you have any questions and thanks for looking!

This board has some fried resistors you can see in the pics, it would blow the main fuse on back when you powered the unit on so this board is for Parts or Repair. This is the Left side or Channel A amp board and I did have to snip some wires to get it out, but I left plenty to work with. Please let me know if you have any questions and thanks for looking!

Yamahas first professional-use power amplifier that delivers high sound quality and unparalleled durability.Achieves 240W+240W (8 ohms). Features a large VU meter.Still in operation at many PA sites today. eBay listing template by 3Dsellers.com - Try for Free!

**YAMAHA P-2200 PROFESSIONAL POWER AMPLIFIER - For Parts or Repair** -Unit arrived in my facility as shown in the photos.-Probably was stored for some time in a garage or similar environment. Outside screws are rusted and there is some oxidation on the connectors on the back panel as well as certain spots on the heatsinks, etc.-The amplifier was brought up gradually with a Variac to line voltage and did stay powered on with the power light lit.-The left channel power meter fluctuates from zero to about the halfway position in a rhythmic motorboating sort of pattern with no input signal applied. The right channel power meter does not move.-Do to the overall condition of the unit, no further testing was done. The amplifier is being sold AS-IS for parts or restoration. NO returns please.-LOCAL pickup is available to avoid the shipping cost. -No other parts or accessories included -Please contact me anytime for questions regarding this product.