????Including & Condition Details: As shown in photos. ????Shipping: FedEx DENON DP-67L Record Player (Direct Drive / Automatic Arm Lift) This is a semi-automatic player from DENON that uses a quartz lock, released in 1982. It uses a thick cabinet to reduce external vibrations and reproduce clear sound. Other features include the Dynamic Servo Tracer pure electronic arm damping mechanism. An electronic damping mechanism is built into the tonearm support, so even if the record is slightly warped, the sound image will not wobble and the sound groove will be traced beautifully. ?ConditionEach part has been polished/cleaned. The dust cover is polished with a special abrasive depending on the level of scratches, and the finish is polished to enhance transparency. The arm, platter, and metal parts are polished to remove dirt and rust until they are as clean as possible. Dust Cover/Operation Panel/Platter/Rubber Mat ?The cover has some scuffs and scratches, but no noticeable damage, and it is clear and clean. ?The operation panel and platter are also shiny. ?The rubber mat is soft and not deteriorated or warped. Cabinet ?No major damage is found, it is shiny and clean. ?All four insulators are functioning, and the hinges are not worn out and can be kept open. Tonearm?There are no noticeable scratches overall, it is shiny and in good condition. There is no sagging of the weight axis. Overall, it is in beautiful condition. Considering the age, we judge it to be in good condition. ?We have tested the product for half a day to a day to check its operation. In preparation for this product, we have performed a comprehensive maintenance and operation check. We have measured the electronic parts, lubricated the spindle with oil, cleaned each contact, and adjusted each part. It is in a condition that you can use with confidence. Turntable It works well, and there are no problems with the start/stop button response. - The quartz lock is engaged and it rotates normally and stably. The stability of the rotation has been confirmed with a stroboscope. - The 33/45 rotation switch is also functional. - The light also lights up without any bulb burnout. *This product is common to 50/60Hz. TonearmIt works well, and outputs beautiful sound from both the left and right channels. - The lifter operates smoothly with the UP/DOWN button. - After playing, the arm automatically rises and stops rotating. - Anti-skating/Q damping adjustment/operation is also good. - The tonearm height can also be adjusted without sticking. All of the above operations are complete and in perfect working order. ?Product Details Manufacturer: DENON Model: DP-67L Dimensions: W485 x D410 x H195 (mm) Weight: 15kg ?Accessories ?Dust Cover ?Rubber Mat (DENON) ?Straight Pipe (PCL-67) ?Weight x 2 ?EP Adapter ?Instruction Manual (copy) ?Transport Screws x 2 (The transport screws will be attached when shipping. Please remove them before use.) ?The record and cartridge in the photos are for presentation, they are not included. ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

YAMAHA YOP-1 EXTERNAL POWER SUPPLY GT-2000/2000L/2000X RECORD PLAYER JAPAN Description ?? Condition: Used Please confirm the condition by reviewing the images carefully. ?? YAMAHA YOP-1 EXTERNAL POWER SUPPLY FOR GT-2000/2000L/2000X TURNTABLES The YOP-1 is an external regulated power supply specifically designed for the GT-2000/2000L/2000X turntables. By providing a stable DC voltage, it stabilizes the rotation of the phonograph motor and reduces unwanted noise and vibrations by separating the power supply from the turntable itself. The GT-2000/2000L platters have a massive moment of inertia, and the YOP-1 uses electronic braking for both directions of the GT-2000/2000Ls phonograph motor to quickly bring it to a stop. ? Condition There are minor scratches and signs of aging, but there are no major damages and it remains in a glossy condition. Please note that this is a used item that has aged over time. Please understand that there may be minor scratches, tarnish, or signs of use due to age and use. The condition check is based on our companys standards for vintage audio equipment, and the staff has selected the condition accordingly. However, the perception of condition can vary from person to person, so there may be differences from your standards. Please carefully review the images and make your judgment. We are happy to answer any questions about the condition, so feel free to contact us. ? Operation We have confirmed the operation by connecting it to our GT-2000 equipment. There are no issues with its operation. We conduct thorough product checks, but in the unlikely event of an initial operational failure, we will offer free repair, return, or refund within one week of receipt, so please rest assured. In case of operational failure, please return the item at our expense for shipping. For returns other than initial operational failure, please note that the return shipping cost will be borne by the buyer. After receiving the returned product and confirming its condition, we will issue a refund. ? Product Information Manufacturer: YAMAHA Model: YOP-1 Dimensions: W137 × H90 × D360 (mm) Weight: 5.1 kg ? Included Accessories User manual (copy) Please note that everything in the photos, except for the background equipment, is included. Please check carefully. ?? Please feel free to ask any questions. We will respond within 48 hours. The product description may use automatic translation by AI. There may be some minor translation errors or unnatural parts. If any questions arise due to this, please be sure to ask before making a purchase. We will make every effort to address any questions before the purchase. Shipping ?? Items would generally be dispatched within 6 working days. ?? Most items will be shipped using FeDex, DHL or UPS which is reliable and arrives quickly. ?? Please note that for special items, or depending on the destination country, different shipping methods may be used. ?? Depending on the country, certain items such as watches and sunglasses may experience delays during customs clearance. Please be aware of this in advance. ?? As liquids are difficult to export, ink will not be included with pens, etc. Even if there are ink bottles in the images, the contents will be removed before shipping. International Buyers - Please Note: ?? Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. ?? Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. ?? These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?? The customs declaration amount will be based on the selling price on eBay. It is illegal to underdeclare the declared amount, a practice commonly referred to as undervaluing, so it must not be done under any circumstances. Similarly, declaring items as gifts is also not permitted.

Pretty Nice Yamaha R-2000 Receiver Digital Synthesizer Tuner, on Back 550 Watts. Tested sounded Good All 3 Channels working, Tuner came in well. Knobs are not too scratchy. Everything work well except I couldnt get the phono to work sound is barley coming out. This will be sold as needs repair. The silver face is pretty clean. It looks pretty Dirty inside needs a cleaning. some of the veneer is coming off the right side, a little bit on the left also. there are a few scratches on top. the channel knob is off set, and the volume needs to be glued back on, this is what i see. It had good power!!! Any Questions just email and thanks for looking. 21 1/4 Wide in inches. Needs Work!

Yamaha natural sound AV receiver RX – a2000 aventage Still in new condition Does not come with the remote Selling as is in working condition Please take a look at all pictures before placing your bid Ask any questions All sales are final

Product descriptionAiming to be a work of art, this integrated amplifier condenses Yamahas circuit technology and achieves a high degree of perfection comparable to that of separate amplifiers.*The basic circuit configuration consists of an equalizer amplifier, tone control amplifier, DC amplifier, main amplifier with volume switchable between class B and class A, and a head amplifier for MC cartridges.The equalizer amplifier, tone control amplifier, and MC head amplifier have almost the same circuit configuration as the C-2.*The circuit configuration of the main amplifier is: first stage current mirror cascode bootstrap FET differential amplification ? cascode connection constant current load emitter grounded amplification ? Darlington connection pure complementary parapush OCL drive / Output stage, signal path / NF loop to capacitor This is a DC amplifier that eliminates the*The equalizer circuit consists of a cascode bootstrap current mirror differential input using Yamahas original super low noise pair FETs, a Darlington connection constant current load emitter grounding, and a pure complementary SEPP output stage.*The basic circuit configuration of the tone circuit is almost the same as the equalizer amplifier, and the second stage Darlington connection is omitted because it does not require as much gain as the equalizer amplifier.A volume is inserted in the front stage of the tone amplifier, and when the volume is turned down, the signal source impedance changes, but by adopting a cascode bootstrap circuit like the equalizer amplifier, distortion due to changes in signal source impedance is eliminated. There is no deterioration in rate.*The MC head amplifier section uses Yamahas original super low noise IC to achieve a high SN ratio for the rated input.*In order to improve the SN ratio during actual use, two high-precision quadruple volume units are installed per channel on the input and output sides of the tone amplifier, and the output side ranges from 0 to 6 dB, -24 to -infinity, and from -6 dB to -infinity. Adjustment is made on the input side to -24dB.*The peak meter can indicate the peak level of a signal in a wide range of -50dB to +5dB (0dB = 100W/8?) and 1mW to 316W/8? using a logarithmic compression circuit and a peak hold circuit. It also has a fast rise time of 100?s and is compatible with pulsed signals.Furthermore, the meter is equipped with a changeover switch, and the output level of SP out and the output level of Rec out can be switched and displayed.*Equipped with a Mode switch, Stereo Normal, Stereo Rev, L+R, L, and R can be selected.* Equipped with a muting switch, -20dB muting is possible with a single switch.Also, if you set this switch to the Pre out off position, the Pre out signal will no longer be output.*The preamplifier section and main amplifier section can be used separately.*In order to further improve low noise and low distortion, the equalizer sheet is directly connected to the rear panel, no shielded wires are used, and the printed circuit board pattern is designed to minimize noise and distortion. The board through which the signal passes is tightly shielded.Furthermore, with an emphasis on operability, newly developed universal joints are adopted for the Phono selector, Rec out selector, and Input selector, achieving low noise, low distortion, and improved operability.?Main specificationsEffective output (0.03%, Aux)20Hz to 20kHz: 140W+140W (4?, class B) 120W+120W (8?, class B) 30W+30W (8?, class A) 1kHz: 180W+180W (4?, class B)130W+130W (8?, B class)Total harmonic distortion rate (20Hz to 20kHz) Phono 1, 2 ? Rec out (5V): 0.003% or less Phono MC ? Rec out (3V): 0.03% or lessTuner, Aux ? Pre out (3V): 0.005% or less Main in ? SP out (60W, B class, 8?): 0.01% or less (15W, A class, 8?): 0.005% or lessTuner ? SP out (60W, B class, 8?): 0.01% or lessPower band width (0.03%, 8?) Class B: 10Hz to 50kHz Class A: 10Hz to 70kHzDamping factor 45 or more (8?, 1kHz)Frequency characteristicsPhono 1, 2 MC (RIAA deviation): 30Hz to 15kHz ±0.2dB Tuner-Pre out: 5Hz to 100kHz +0 -1dBTuner-SP out (8? load): 5Hz to 50kHz +0 -1dBInput sensitivity (rated)/impedance Phono 1:2mV/47k?, 68k?, 100k? Phono 2:2mV/47k?Phono MC:50?V/10??Tuner, Aux:120mV/50k??Main in:1V/50k?Maximum allowable input (1kHz, 0.02% distortion) Phono1, 2: 310mVr.m.s Phono MC: 7.5mVr.m.s Tuner, Aux: 20Vr.m.s Output level/impedance Rec out: 120mV/600? Pre out: 1V/500?Tone control characteristics Bass (125Hz?500Hz): ±10dB (20Hz) Treble (8kHz?2.5kHz): ±10dB (20kHz)Subsonic filter 15Hz, 12dB/octHigh filter 10Hz, 12dB/octNoise level/SN ratio (IHF-A Network) Phono1, 2:82dB Phono MC:71dB (input 50? short) 68dB (input 0? short)Tuner, Aux, Tape: 100dB Main: 118dBResidual noise 0.07mV or lessPower supply AC100V, 50Hz/60HzRated power consumption 300WExternal dimensions Width 461x Height 170x Depth 360mmWeight 20kg?The condition of the product is C RANK: Used item with signs of use and many scratches and stains.Maintenance completed by our stores designated contractor (power circuit, tribe transistor, small transistor replacement, protection relay overhaul, bias voltage adjustment, contact failure cleaning of each switch)For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Product descriptionAiming to be a work of art, this integrated amplifier condenses Yamahas circuit technology and achieves a high degree of perfection comparable to that of separate amplifiers.*The basic circuit configuration consists of an equalizer amplifier, tone control amplifier, DC amplifier, main amplifier with volume switchable between class B and class A, and a head amplifier for MC cartridges.The equalizer amplifier, tone control amplifier, and MC head amplifier have almost the same circuit configuration as the C-2.*The circuit configuration of the main amplifier is: first stage current mirror cascode bootstrap FET differential amplification ? cascode connection constant current load emitter grounded amplification ? Darlington connection pure complementary parapush OCL drive / Output stage, signal path / NF loop to capacitor This is a DC amplifier that eliminates the*The equalizer circuit consists of a cascode bootstrap current mirror differential input using Yamahas original super low noise pair FETs, a Darlington connection constant current load emitter grounding, and a pure complementary SEPP output stage.*The basic circuit configuration of the tone circuit is almost the same as the equalizer amplifier, and the second stage Darlington connection is omitted because it does not require as much gain as the equalizer amplifier.A volume is inserted in the front stage of the tone amplifier, and when the volume is turned down, the signal source impedance changes, but by adopting a cascode bootstrap circuit like the equalizer amplifier, distortion due to changes in signal source impedance is eliminated. There is no deterioration in rate.*The MC head amplifier section uses Yamahas original super low noise IC to achieve a high SN ratio for the rated input.*In order to improve the SN ratio during actual use, two high-precision quadruple volume units are installed per channel on the input and output sides of the tone amplifier, and the output side ranges from 0 to 6 dB, -24 to -infinity, and from -6 dB to -infinity. Adjustment is made on the input side to -24dB.*The peak meter can indicate the peak level of a signal in a wide range of -50dB to +5dB (0dB = 100W/8?) and 1mW to 316W/8? using a logarithmic compression circuit and a peak hold circuit. It also has a fast rise time of 100?s and is compatible with pulsed signals.Furthermore, the meter is equipped with a changeover switch, and the output level of SP out and the output level of Rec out can be switched and displayed.*Equipped with a Mode switch, Stereo Normal, Stereo Rev, L+R, L, and R can be selected.* Equipped with a muting switch, -20dB muting is possible with a single switch.Also, if you set this switch to the Pre out off position, the Pre out signal will no longer be output.*The preamplifier section and main amplifier section can be used separately.*In order to further improve low noise and low distortion, the equalizer sheet is directly connected to the rear panel, no shielded wires are used, and the printed circuit board pattern is designed to minimize noise and distortion. The board through which the signal passes is tightly shielded.Furthermore, with an emphasis on operability, newly developed universal joints are adopted for the Phono selector, Rec out selector, and Input selector, achieving low noise, low distortion, and improved operability.?Main specificationsEffective output (0.03%, Aux)20Hz to 20kHz: 140W+140W (4?, class B) 120W+120W (8?, class B) 30W+30W (8?, class A) 1kHz: 180W+180W (4?, class B)130W+130W (8?, B class)Total harmonic distortion rate (20Hz to 20kHz) Phono 1, 2 ? Rec out (5V): 0.003% or less Phono MC ? Rec out (3V): 0.03% or lessTuner, Aux ? Pre out (3V): 0.005% or less Main in ? SP out (60W, B class, 8?): 0.01% or less (15W, A class, 8?): 0.005% or lessTuner ? SP out (60W, B class, 8?): 0.01% or lessPower band width (0.03%, 8?) Class B: 10Hz to 50kHz Class A: 10Hz to 70kHzDamping factor 45 or more (8?, 1kHz)Frequency characteristicsPhono 1, 2 MC (RIAA deviation): 30Hz to 15kHz ±0.2dB Tuner-Pre out: 5Hz to 100kHz +0 -1dBTuner-SP out (8? load): 5Hz to 50kHz +0 -1dBInput sensitivity (rated)/impedance Phono 1:2mV/47k?, 68k?, 100k? Phono 2:2mV/47k?Phono MC:50?V/10??Tuner, Aux:120mV/50k??Main in:1V/50k?Maximum allowable input (1kHz, 0.02% distortion) Phono1, 2: 310mVr.m.s Phono MC: 7.5mVr.m.s Tuner, Aux: 20Vr.m.s Output level/impedance Rec out: 120mV/600? Pre out: 1V/500?Tone control characteristics Bass (125Hz?500Hz): ±10dB (20Hz) Treble (8kHz?2.5kHz): ±10dB (20kHz)Subsonic filter 15Hz, 12dB/octHigh filter 10Hz, 12dB/octNoise level/SN ratio (IHF-A Network) Phono1, 2:82dB Phono MC:71dB (input 50? short) 68dB (input 0? short)Tuner, Aux, Tape: 100dB Main: 118dBResidual noise 0.07mV or lessPower supply AC100V, 50Hz/60HzRated power consumption 300WExternal dimensions Width 461x Height 170x Depth 360mmWeight 20kg?The condition of the product is that there are no noticeable scratches or stains.In the cassette section, all 5 drive rubber belts etc. have been replaced with new ones, and each part has been fully maintained (head, roller cleaning, drive mechanism re-greased, etc.), and the tape runs smoothly.Recording playback, fast forward/rewind, stop function at tape end, etc. all work normally. DRPS9 song selection function is OK. Line in and out have been confirmed, and microphone mixing has also been confirmed. The inside of the battery box is clean and can be operated on batteries. In addition, the lighting lamp can be turned on, and the needle meter swings evenly from side to side. Equipped with a convenient tape speed adjustment function, the standard speed is already adjusted at the 0 position.The antenna is not damaged or bent, and the battery compartment is clean.For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Yamaha natural sound AV receiver RX – a2000 aventage Still in new condition Does not come with the remote Selling as is in working condition Please take a look at all pictures before placing your bid Ask any questions All sales are final

Product description Aiming to be a work of art, this integrated amplifier condenses Yamahas circuit technology and achieves a high degree of perfection comparable to that of separate amplifiers. *The basic circuit configuration consists of an equalizer amplifier, tone control amplifier, DC amplifier, main amplifier with volume switchable between class B and class A, and a head amplifier for MC cartridges. The equalizer amplifier, tone control amplifier, and MC head amplifier have almost the same circuit configuration as the C-2. *The circuit configuration of the main amplifier is: first stage current mirror cascode bootstrap FET differential amplification ? cascode connection constant current load emitter grounded amplification ? Darlington connection pure complementary parapush OCL drive / Output stage, signal path / NF loop to capacitor This is a DC amplifier that eliminates the *The equalizer circuit consists of a cascode bootstrap current mirror differential input using Yamahas original super low noise pair FETs, a Darlington connection constant current load emitter grounding, and a pure complementary SEPP output stage. *The basic circuit configuration of the tone circuit is almost the same as the equalizer amplifier, and the second stage Darlington connection is omitted because it does not require as much gain as the equalizer amplifier. A volume is inserted in the front stage of the tone amplifier, and when the volume is turned down, the signal source impedance changes, but by adopting a cascode bootstrap circuit like the equalizer amplifier, distortion due to changes in signal source impedance is eliminated. There is no deterioration in rate. *The MC head amplifier section uses Yamahas original super low noise IC to achieve a high SN ratio for the rated input. *In order to improve the SN ratio during actual use, two high-precision quadruple volume units are installed per channel on the input and output sides of the tone amplifier, and the output side ranges from 0 to 6 dB, -24 to -infinity, and from -6 dB to -infinity. Adjustment is made on the input side to -24dB. *The peak meter can indicate the peak level of a signal in a wide range of -50dB to +5dB (0dB = 100W/8?) and 1mW to 316W/8? using a logarithmic compression circuit and a peak hold circuit. It also has a fast rise time of 100?s and is compatible with pulsed signals. Furthermore, the meter is equipped with a changeover switch, and the output level of SP out and the output level of Rec out can be switched and displayed. *Equipped with a Mode switch, Stereo Normal, Stereo Rev, L+R, L, and R can be selected. * Equipped with a muting switch, -20dB muting is possible with a single switch. Also, if you set this switch to the Pre out off position, the Pre out signal will no longer be output. *The preamplifier section and main amplifier section can be used separately.*In order to further improve low noise and low distortion, the equalizer sheet is directly connected to the rear panel, no shielded wires are used, and the printed circuit board pattern is designed to minimize noise and distortion. The board through which the signal passes is tightly shielded. Furthermore, with an emphasis on operability, newly developed universal joints are adopted for the Phono selector, Rec out selector, and Input selector, achieving low noise, low distortion, and improved operability. ?Main specifications Effective output (0.03%, Aux) 20Hz to 20kHz: 140W+140W (4?, class B) 120W+120W (8?, class B) 30W+30W (8?, class A) 1kHz: 180W+180W (4?, class B) 130W+130W (8?, B class) Total harmonic distortion rate (20Hz to 20kHz) Phono 1, 2 ? Rec out (5V): 0.003% or less Phono MC ? Rec out (3V): 0.03% or less Tuner, Aux ? Pre out (3V): 0.005% or less Main in ? SP out (60W, B class, 8?): 0.01% or less (15W, A class, 8?): 0.005% or less Tuner ? SP out (60W, B class, 8?): 0.01% or less Power band width (0.03%, 8?) Class B: 10Hz to 50kHz Class A: 10Hz to 70kHz Damping factor 45 or more (8?, 1kHz) Frequency characteristics Phono 1, 2 MC (RIAA deviation): 30Hz to 15kHz ±0.2dB Tuner-Pre out: 5Hz to 100kHz +0 -1dB Tuner-SP out (8? load): 5Hz to 50kHz +0 -1dB Input sensitivity (rated)/impedance Phono 1:2mV/47k?, 68k?, 100k? Phono 2:2mV/47k? Phono MC:50?V/10??Tuner, Aux:120mV/50k??Main in:1V/50k? Maximum allowable input (1kHz, 0.02% distortion) Phono1, 2: 310mVr.m.s Phono MC: 7.5mVr.m.s Tuner, Aux: 20Vr.m.s Output level/impedance Rec out: 120mV/600? Pre out: 1V/500? Tone control characteristics Bass (125Hz?500Hz): ±10dB (20Hz) Treble (8kHz?2.5kHz): ±10dB (20kHz) Subsonic filter 15Hz, 12dB/oct High filter 10Hz, 12dB/oct Noise level/SN ratio (IHF-A Network) Phono1, 2:82dB Phono MC:71dB (input 50? short) 68dB (input 0? short) Tuner, Aux, Tape: 100dB Main: 118dB Residual noise 0.07mV or less Power supply AC100V, 50Hz/60Hz Rated power consumption 300W External dimensions Width 461x Height 170x Depth 360mm Weight 20kg ?The condition of the product is that there are no noticeable scratches or stains. In the cassette section, all 5 drive rubber belts etc. have been replaced with new ones, and each part has been fully maintained (head, roller cleaning, drive mechanism re-greased, etc.), and the tape runs smoothly. Recording playback, fast forward/rewind, stop function at tape end, etc. all work normally. DRPS9 song selection function is OK. Line in and out have been confirmed, and microphone mixing has also been confirmed. The inside of the battery box is clean and can be operated on batteries. In addition, the lighting lamp can be turned on, and the needle meter swings evenly from side to side. Equipped with a convenient tape speed adjustment function, the standard speed is already adjusted at the 0 position. The antenna is not damaged or bent, and the battery compartment is clean. For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Tested and works great. Ships fast (within 1 business day) from a smoke free facility! Please let me know if you have any questions, I am here to help! Thanks for looking and have an amazing day.

viewport content=width=device-width, initial-scale=1> Yamaha AX-2000 AV Natural Sound Amplifier Good Condition Used Description Model number: AX-2000Warranty period: 6 months Guaranteed shipping: 1-2 days later Registration date: August 12, 2024Release date: 1987Stereo integrated amplifier with built-in D/A converter equipped with advanced digital direct function.*Maintenance completed at our repair center in February 2023. ?Note only for products that are turned on.?????????????Products that do not turn on are not eligible? The power supply for this product is AC100V 50/60Hz.A transformer may be required in some countries.Please prepare the transformer on the purchase side. Outlet specifications??A typeIf it is different from A type, a converter is required. You in areas other than 100V.If you use the transformer I sell, you can use it in areas other than 100V.ebay.comhttp://www.ebay.com/itm/373547463184ebay.ukhttps://www.ebay.com/itm/373547520813 ebay.euhttps://www.ebay.com/itm/373547520926ebay.auhttps://www.ebay.com/itm/373547520958We also sell other than ebay.com.Please contact us if you would like to purchase.If you have any other questions, please contact me.* It may not be possible in some areasPlease consider carefully.Payment ??We accept payment by PayPal only. ??Please payment within ??3 days after the auction closed. Shipping free shippingShip by express EMS?or DHL or FedExWe will deliver by the fastest delivery method. Shipment with damage / loss insuranceWith tracking number ??(10-15 days to US) ??(10-30days or more to Other countries) Terms of Sale ??[About returned goods]????Returns are accepted only if the item was ? not the item described in the aution. [Return] Returned goods for personal reasons will not be accepted. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Provided by HARU

Pretty Nice Yamaha R-2000 Receiver Digital Synthesizer Tuner, on Back 550 Watts. Tested sounded Good All 3 Channels working, Tuner came in well. Knobs are not too scratchy. Everything work well except I couldnt get the phono to work sound is barley coming out. This will be sold as needs repair. The silver face is pretty clean. It looks pretty Dirty inside needs a cleaning. some of the veneer is coming off the right side, a little bit on the left also. there are a few scratches on top. the channel knob is off set, and the volume needs to be glued back on, this is what i see. It had good power!!! Any Questions just email and thanks for looking. 21 1/4 Wide in inches. Needs Work!

Moving sale. Bought new for $4K rarely used. Will ship in box and packing materials it arrived in. Great sounding receiver. Looks and sounds amazing. Description here: https://www.crutchfield.com/p_022RN2KASL/Yamaha-R-N2000A-Silver.html

Description The items shown in the photos are included in this listing. Internatinal Buyers - Please note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers resposibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Shipping We will ship by FedEx, DHL or Japan Post.The package has a tracking number.Shipping is available from Monday to Friday. Return Customer service and satisfaction are very important to us. We have return policy if requested within 14 days of the receipt of the item. Return shipping will be paid by Buyer. All returned items must be original condition. Please contact us first for return before you ship it back to us.

Description 2 shelves 002 YAMAHA YOP-1 GT-2000/L power supply unit All my products are 100% Authentic.Please feel free to contact us if you have any question. Shipping We ship using FedEx, DHL and Japan Post. PaymentWe usually ship within 10 business days of receiving cleared payment. International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Yamaha GT-2000 Turntable Dust Cover. Original. Sold as seen. Has a crack on the back that can be glued back flush. I have not glued it back yet. Unfortunately the reproductions are not well made. A friend got one and it wouldn’t even clear the strobe. He had to use a heat gun to bend the cover. This is an original in decent shape except for the crack.

DescriptionAll my products are 100% Authentic. Please feel free to contact us if you have any question. Payment We usually ship within 10 business days of receiving cleared payment. Shipping We ship using FedEx, DHL and Japan Post.Remote area fee may be charged separately.International Buyers - Please Note: We will always send the package with a tracking number. So, please place your order with no worries about delivery. You can track the delivery status at any time. We only ship to addresses registered with eBay. If you wish to ship to another address, please change your address on eBay before placing your order. Shipping is available Monday through Friday. Weekends are not available as freight (shipping) companies are closed. We do not list item values below value or label items as gift items. Japanese, U.S., and international government regulations prohibit such practices.

Tested and works great. Ships fast (within 1 business day) from a smoke free facility! Please let me know if you have any questions, I am here to help! Thanks for looking and have an amazing day.

Powers up but is otherwise completely untested. Could work perfectly or could have issues. Purchased at a yard sale. NO POWER CABLE INCLUDED AND NO RETURNS ACCEPTED!

Yamaha GT-2000 Turntable Feet. Original Sold as seen. Tested and working. Held up in my GT.

Description+++ YAMAHA Natural Sound Stereo Amplifier Natural Sound Stereo Amplifier Pre-Main Amplifier A-2000a Sound output has been checked. Accessories Main unit Power cable (directly attached to the main unit) Condition Sound output has been confirmed from all inputs and outputs. Three button covers are missing. Please refer to the pictures for other details. Shipping+++ Fedex International Buyers - Please Note+++ Import duties taxes and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.

Yamaha GT-2000 Turntable Feet. Original Sold as seen. Tested and working. Held up in my GT.

Yamaha GT-2000 Turntable Dust Cover. Original. Sold as seen. Has a crack on the back that can be glued back flush. I have not glued it back yet. Unfortunately the reproductions are not well made. A friend got one and it wouldn’t even clear the strobe. He had to use a heat gun to bend the cover. This is an original in decent shape except for the crack.

Description*Please see the photos and buy only if you are satisfied with the item.-Tested, confirmed working properly without any issues-It is in very good condition with no common button missing issues.If you have any concerns about the product, please contact us directly.ShippingItem will be shipped via FEDEX.Please allow 5 business days for handling time.Shipping from Japan.It takes approximately 4 to 7 days for the product to arrive it is shipped.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Thank you for your understanding.

Description All my products are 100% Authentic.Please feel free to contact us if you have any question. Shipping We ship using FedEx, DHL and Japan Post. PaymentWe usually ship within 3?10 International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.