For private sale is a Yamaha MX-1 power amplifier.Its 25kg of solid state, capable of driving loads at two ohms. http://www.thevintageknob.org/yamaha-MX-1.html https://stereonomono.blogspot.com/20...-19931994.html The MX-1 was tested for correct operation in October 2020 by Alan Kendal.The amp was biased to Yamaha specifications. (I have the service manual.)All components were tested to be within tolerance.The amplifier was put into storage after the inspection and has not been used since, apart from a recent test session of which I have a video for show to potential purchasers.The amp is 25 years old.This unit is a 230V European model. Collection from Cardiff in South Wales.Payment in advance, as per usual eBay practice, thank you. Please get in touch if you wish to discuss more about the MX-1. https://www.hifiengine.com/manual_li...aha/mx-1.shtml The MX-1 is for sale in good faith.It is a private sale, sold as seen, without guarantee, returns not accepted.Please ensure that you ask questions and satisfy yourself about the conditions PRIOR to bidding. Specs:200 W (8 ?) from 20 to 20,000 Hz at no more than 0.008% THD260 W (4 ?) from 20 to 20,000 Hz at no more than 0.03% THD320 W (2 ?) from 20 to 20,000 Hz at no more than 0.09% THDInput Sensitivity/Impedance (Main IN): 1.46 V/20 k?Damping Factor(SPA, 8?, 20 - 20,000 Hz) : 350(8?, 1 kHz) : 250Dynamic Power per Channel (by IHF Dynamic headroom Measuring Method):280 W at 8 ohms460 W at 6 ohms630 W at 2 ohmsDynamic Headroom :1.46 dB at 8 ohms2.48 dB at 6 ohms2.94 dB at 2 ohmsPower Bandwidth (8?, 0.03% THD, half Rated Power): 10 to 60,000 HzFrequency Response (Main In): 20 to 20,000 Hz, ±0.5 dBSignal-to-Noise Ratio (IHF-A-Network): 125 dB (Main In, Shorted)Residual Noise (IHF-A-Network): 20 ?VChannel Separation (Vol -30 dB, Main In, Input 5.1 k? terminaled)1 kHz/10 kHz : 80 dB/ 60 dBDimensions (W x H x D): 438 x 116 x 486 mm (17-1/4 x 4-9/16 x 19-1/8 inch)Weight: 24kg (52 lbs, 14 oz) Note: this is a power amp - you require a pre-amplifier in your system. The MX-1 is for sale in good faith.It is a private sale, sold as seen, without guarantee, returns not accepted.I do not have the original packaging.Please ensure that you ask questions and satisfy yourself about the conditions PRIOR to bidding.

For private sale is a Yamaha MX-1 power amplifier.Its 25kg of solid state, capable of driving loads at two ohms. http://www.thevintageknob.org/yamaha-MX-1.html https://stereonomono.blogspot.com/20...-19931994.html The MX-1 was tested for correct operation in October 2020 by Alan Kendal.The amp was biased to Yamaha specifications. (I have the service manual.)All components were tested to be within tolerance.The amplifier was put into storage after the inspection and has not been used since, apart from a recent test session of which I have a video for show to potential purchasers.The amp is 25 years old.This unit is a 230V European model. Collection from Cardiff in South Wales.Payment in advance, as per usual eBay practice, thank you. Please get in touch if you wish to discuss more about the MX-1. https://www.hifiengine.com/manual_li...aha/mx-1.shtml The MX-1 is for sale in good faith.It is a private sale, sold as seen, without guarantee, returns not accepted.Please ensure that you ask questions and satisfy yourself about the conditions PRIOR to bidding. Specs:200 W (8 ?) from 20 to 20,000 Hz at no more than 0.008% THD260 W (4 ?) from 20 to 20,000 Hz at no more than 0.03% THD320 W (2 ?) from 20 to 20,000 Hz at no more than 0.09% THDInput Sensitivity/Impedance (Main IN): 1.46 V/20 k?Damping Factor(SPA, 8?, 20 - 20,000 Hz) : 350(8?, 1 kHz) : 250Dynamic Power per Channel (by IHF Dynamic headroom Measuring Method):280 W at 8 ohms460 W at 6 ohms630 W at 2 ohmsDynamic Headroom :1.46 dB at 8 ohms2.48 dB at 6 ohms2.94 dB at 2 ohmsPower Bandwidth (8?, 0.03% THD, half Rated Power): 10 to 60,000 HzFrequency Response (Main In): 20 to 20,000 Hz, ±0.5 dBSignal-to-Noise Ratio (IHF-A-Network): 125 dB (Main In, Shorted)Residual Noise (IHF-A-Network): 20 ?VChannel Separation (Vol -30 dB, Main In, Input 5.1 k? terminaled)1 kHz/10 kHz : 80 dB/ 60 dBDimensions (W x H x D): 438 x 116 x 486 mm (17-1/4 x 4-9/16 x 19-1/8 inch)Weight: 24kg (52 lbs, 14 oz) Note: this is a power amp - you require a pre-amplifier in your system. The MX-1 is for sale in good faith.It is a private sale, sold as seen, without guarantee, returns not accepted.I do not have the original packaging.Please ensure that you ask questions and satisfy yourself about the conditions PRIOR to bidding.

For private sale is a Yamaha MX-1 power amplifier.Its 25kg of solid state, capable of driving loads at two ohms. http://www.thevintageknob.org/yamaha-MX-1.html https://stereonomono.blogspot.com/20...-19931994.html The MX-1 was tested for correct operation in October 2020 by Alan Kendal.The amp was biased to Yamaha specifications. (I have the service manual.)All components were tested to be within tolerance.The amplifier was put into storage after the inspection and has not been used since, apart from a recent test session of which I have a video for show to potential purchasers.The amp is 25 years old.This unit is a 230V European model. Collection from Cardiff in South Wales.Payment in advance, as per usual eBay practice, thank you. Please get in touch if you wish to discuss more about the MX-1. https://www.hifiengine.com/manual_li...aha/mx-1.shtml The MX-1 is for sale in good faith.It is a private sale, sold as seen, without guarantee, returns not accepted.Please ensure that you ask questions and satisfy yourself about the conditions PRIOR to bidding. Specs:200 W (8 ?) from 20 to 20,000 Hz at no more than 0.008% THD260 W (4 ?) from 20 to 20,000 Hz at no more than 0.03% THD320 W (2 ?) from 20 to 20,000 Hz at no more than 0.09% THDInput Sensitivity/Impedance (Main IN): 1.46 V/20 k?Damping Factor(SPA, 8?, 20 - 20,000 Hz) : 350(8?, 1 kHz) : 250Dynamic Power per Channel (by IHF Dynamic headroom Measuring Method):280 W at 8 ohms460 W at 6 ohms630 W at 2 ohmsDynamic Headroom :1.46 dB at 8 ohms2.48 dB at 6 ohms2.94 dB at 2 ohmsPower Bandwidth (8?, 0.03% THD, half Rated Power): 10 to 60,000 HzFrequency Response (Main In): 20 to 20,000 Hz, ±0.5 dBSignal-to-Noise Ratio (IHF-A-Network): 125 dB (Main In, Shorted)Residual Noise (IHF-A-Network): 20 ?VChannel Separation (Vol -30 dB, Main In, Input 5.1 k? terminaled)1 kHz/10 kHz : 80 dB/ 60 dBDimensions (W x H x D): 438 x 116 x 486 mm (17-1/4 x 4-9/16 x 19-1/8 inch)Weight: 24kg (52 lbs, 14 oz) Note: this is a power amp - you require a pre-amplifier in your system. The MX-1 is for sale in good faith.It is a private sale, sold as seen, without guarantee, returns not accepted.I do not have the original packaging.Please ensure that you ask questions and satisfy yourself about the conditions PRIOR to bidding.

Sehr hochwertige Endstufe neu in ungeöffneter Originalverpackung,volle Garantie und Rechnung mit ausgewiesener Mehrwertsteuer, da Kauf vom Fachhändler. Auch alle A/V Receiver RX-A8/6/4/2A zu Top-Preisen sofort lieferbar. Dauerleistung (bei Klirrfaktor) 8 Ohm: 11x 150 Watt bei 0,06% bzw. 7x 150 Watt + 2x 200 Watt im BTL-Modus4 Ohm: 11x 290 Watt bei 0,9%Dynamikleistung 8 Ohm: 11x 190 Watt4 Ohm: 11x 350 WattGesamtklirrfaktor: 0,015%Dämpfungsfaktor: > 180Frequenzgang: 10 - 100.000 Hz +0/-3 dBSignalrauschabstand: > 116 dBStereokanaltrennung: > 90 dB