For sale is a used Onkyo TX-SR875 receiver. This was the top of the line in its day, and I never found a task or setup scenario it couldnt handle. Comes with the Audyssey setup mic for automatic sound leveling, time delay, and equalization. Please note that the HDMI card on this receiver is NOT WORKING. Actually I think that either the HDMI input or output might be working, but not both. I havent had it plugged in for a couple of years. Other than HDMI, I believe the receiver works as intended. It has had the repair done to fix the front display, so it can be used without a TV. It has a total of 5 digital audio inputs (2 optical and 3 coaxial), so you can still get digital surround sound from your TV, Blu-ray, etc. Also has a multitude of analog audio inputs for CD player, computer, etc. This receiver sounded GREAT when I was using it. Hugely powerful. Very customizable. You can assign the various digital inputs to the source name that you prefer.

Looking to sell my Onkyo TX-SR875 7.1 Receiver. Includes power cord and remote. It’s in great condition and has always been in a pet and smoke free home. It has active cooling installed and heat sinks on the HDMI board to address the overheating that is common with these units. The active cooling is simply three Noctura fans (140mm, 120mm and. 60mm) wired and plugged in to the accessory slot on the back so it can be manually unplugged if desired. Only selling because I don’t use it at much as I should and I feel like it would be better off with someone who can enjoy it more frequently. On Feb-05-24 at 07:29:20 PST, seller added the following information: Rarely see temps get above 28c with active fans and heat syncs on hdmi board.

For sale is a used Onkyo TX-SR875 receiver. This was the top of the line in its day, and I never found a task or setup scenario it couldnt handle. Comes with the Audyssey setup mic for automatic sound leveling, time delay, and equalization. Please note that the HDMI card on this receiver is NOT WORKING. Actually I think that either the HDMI input or output might be working, but not both. I havent had it plugged in for a couple of years. Other than HDMI, I believe the receiver works as intended. It has had the repair done to fix the front display, so it can be used without a TV. It has a total of 5 digital audio inputs (2 optical and 3 coaxial), so you can still get digital surround sound from your TV, Blu-ray, etc. Also has a multitude of analog audio inputs for CD player, computer, etc. This receiver sounded GREAT when I was using it. Hugely powerful. Very customizable. You can assign the various digital inputs to the source name that you prefer.

Das Gehäuse ist in einem einwandfreien Zustand. Das Display schaltet allerdings nicht ein, so daß die Funktionen nicht dargestellt und abgelesen werden können. Sicher durch einen Fachmann mit wenig Aufwand behebbar. Das Gerät wird nicht mehr benötigt und daher in diesem Zustand als defekt und ohne Rückgaberecht abgegeben. Aufgrund des Gewichts nur Abholung möglich!

Looking to sell my Onkyo TX-SR875 7.1 Receiver. Includes power cord and remote. It’s in great condition and has always been in a pet and smoke free home. It has active cooling installed and heat sinks on the HDMI board to address the overheating that is common with these units. The active cooling is simply three Noctura fans (140mm, 120mm and. 60mm) wired and plugged in to the accessory slot on the back so it can be manually unplugged if desired. Only selling because I don’t use it at much as I should and I feel like it would be better off with someone who can enjoy it more frequently.

For sale is a used Onkyo TX-SR875 receiver. This was the top of the line in its day, and I never found a task or setup scenario it couldnt handle. Comes with the Audyssey setup mic for automatic sound leveling, time delay, and equalization. Please note that the HDMI card on this receiver is NOT WORKING. Actually I think that either the HDMI input or output might be working, but not both. I havent had it plugged in for a couple of years. Other than HDMI, I believe the receiver works as intended. It has had the repair done to fix the front display, so it can be used without a TV. It has a total of 5 digital audio inputs (2 optical and 3 coaxial), so you can still get digital surround sound from your TV, Blu-ray, etc. Also has a multitude of analog audio inputs for CD player, computer, etc. This receiver sounded GREAT when I was using it. Hugely powerful. Very customizable. You can assign the various digital inputs to the source name that you prefer.

Looking to sell my Onkyo TX-SR875 7.1 Receiver. Includes power cord and remote. It’s in great condition and has always been in a pet and smoke free home. Only selling because I don’t use it at much as I should and I feel like it would be better off with someone who can enjoy it more frequently.

For sale is a used Onkyo TX-SR875 receiver. This was the top of the line in its day, and I never found a task or setup scenario it couldnt handle. Comes with the Audyssey setup mic for automatic sound leveling, time delay, and equalization. Please note that the HDMI card on this receiver is NOT WORKING. Actually I think that either the HDMI input or output might be working, but not both. I havent had it plugged in for a couple of years. Other than HDMI, I believe the receiver works as intended. It has had the repair done to fix the front display, so it can be used without a TV. It has a total of 5 digital audio inputs (2 optical and 3 coaxial), so you can still get digital surround sound from your TV, Blu-ray, etc. Also has a multitude of analog audio inputs for CD player, computer, etc. This receiver sounded GREAT when I was using it. Hugely powerful. Very customizable. You can assign the various digital inputs to the source name that you prefer.

Looking to sell my Onkyo TX-SR875 7.1 Receiver. Includes power cord and remote. It’s in great condition and has always been in a pet and smoke free home. Only selling because I don’t use it at much as I should and I feel like it would be better off with someone who can enjoy it more frequently.

For sale is a used Onkyo TX-SR875 receiver. This was the top of the line in its day, and I never found a task or setup scenario it couldnt handle. Comes with the Audyssey setup mic for automatic sound leveling, time delay, and equalization. Please note that the HDMI card on this receiver is NOT WORKING. Actually I think that either the HDMI input or output might be working, but not both. I havent had it plugged in for a couple of years. Other than HDMI, I believe the receiver works as intended. It has had the repair done to fix the front display, so it can be used without a TV. It has a total of 5 digital audio inputs (2 optical and 3 coaxial), so you can still get digital surround sound from your TV, Blu-ray, etc. Also has a multitude of analog audio inputs for CD player, computer, etc. This receiver sounded GREAT when I was using it. Hugely powerful. Very customizable. You can assign the various digital inputs to the source name that you prefer.

Looking to sell my Onkyo TX-SR875 7.1 Receiver. Includes power cord and remote. It’s in great condition and has always been in a pet and smoke free home. Only selling because I don’t use it at much as I should and I feel like it would be better off with someone who can enjoy it more frequently.

Onkyo TX-SR875 7.1 Channel Home Theater Receiver Features7.1 Channel Amplifier: The Onkyo TX-SR875 features a 140 watt x 7-channel amplifier in 8-ohms at 20 to 20,000 Hz with a maximum total harmonic distortion of 0.05%.WRAT (Wide Range Amplifier Technology): This technology uses low-negative-feedback circuit topology for accurate signal reproduction, improved dynamic signal-to-noise ratio, and better delivery of power peaks.Digital-to-Analog Converters (DACs): To decode and playback high-resolution recordings, this receiver is equipped with top of the line Burr-Brown 192kHz/24-bit DACs for all channels.Vector Linear Shaping Circuitry (VLSC): Conventional D/A conversion methods reduce digital pulse noise at the conversion stage but cant remove it completely. Previously only found on Onkyos high-end components, VLSC (Vector Linear Shaping Circuitry) employs a unique D/A conversion circuit to overcome this problem. Data is converted between sampling points and these points are joined with analog vectors in real-time to produce a smooth output wave form. The result is a virtually noiseless, smooth analog signal based on the digital source to bring out even the most subtle of nuances in your music, movie soundtracks and even MP3s.Speaker Impedance: There is a menu adjustment for minimum speaker impedance. Options are 6? (for speakers 6 to 16-ohms) and 4? (for speakers 4 or 5-ohms).Multi-Language On-Screen Display (OSD): An OSD can be displayed on your television for easy system setup. The joystick/enter button on the remote makes display navigation and setting adjustment simple and convenient. The setup OSD is passed through all the monitor outputs (composite video, S-video, component video, and HDMI). Once the system is setup, operation details (volume for example) are displayed on screen when using the composite or S-video inputs. Operation details are not displayed when watching a source using the component video or HDMI inputs. You can select a 4:3 or 16:9 aspect ratio for the monitor output so the menu is displayed properly to match your TVs screen. You can choose from the following languages for the receivers on-screen display menu - English, Spanish, French, German, Italian, Dutch, Swedish or Japanese.Component Video Switching: In addition to composite and S-Video switching, this unit can switch between high resolution component video sources. There are 3 component video inputs and 1 component video monitor output. The component video inputs and outputs have a bandwidth of 100MHz.HDMI Switching: The TX-SR875 has four HDMI version 1.3a inputs and one HDMI version 1.3a output for connecting DVD players, HDTV set-top boxes, and other video components through the receiver to your TV or projector. The HDMI cables will pass digital audio and video. The HDMI inputs are compatible with DVI, so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable, along with audio cables. The receiver uses HDCP (High-bandwidth Digital Content Protection), so only HDCP-compatible components can display the picture. The HDMI inputs can accept and switch 480i, 480p, 720p, 1080i, and 1080p signals to a TV, monitor, or projector. Each of the HDMI inputs can be assigned to any of the five rear panel A/V inputs (DVD, VCR/DVR, CBL/SAT, GAME/TV, or AUX 1).Video Upconversion Using HQV Reon-VX Technology: The Onkyo TX-SR875 utilizesHQV Reon-VX technology to convert interlaced video signals to progressive scan signals. The HQV Reon-VX chip provides the ultimate support for standard definition and high definition deinterlacing; 1080p reconstruction of film sources; filtering of jaggies and artifacts; and the reduction of random, mosquito and block (codec) noise. HQV Reon-VX also enables color region enhancement and the rendering of more than one billion colors. The Onkyo TX-SR875 will upconvert incoming analog composite video, S-video and component video signals to HDMI so you can connect all your video sources through the receiver and then to your TV via HDMI to give you the best picture quality possible. The receiver can also convert composite video and S-video signal to component if your television does not feature an HDMI input.RIHD (Remote Interactivity Over HDMI): RIHD synchronizes RIHD-compatible displays and components for integrated control via HDMI connection and use of the receivers IR remote control. RIHD provides the following integrated operations.Control: this function allows CEC-standard-compatible equipment connected to HDMI and RIHD-compatible equipment to be operated together with the Onkyo receiverPower Control: provides an electrical power link between the TX-SR875 and RIHD-compatible components through the HDMI connection and allows for those components to turn on or off with the receiverTV Control: allows you to control the TX-SR875 from an RIHD-compatible TV that is connected via HDMI, currently compatible with Panasonic Televisions featuring EZ SyncAMX Compatible: AMX Device Discovery is a technology integrated into manufacturers products to make programming easy and operation with an AMX control system effortless. By embedding this AMX exclusively designed technology into their products, the industry-leading manufacturers are improving the way A/V installations are programmed, managed and operated.Satellite Ready: The Onkyo TX-SR875 features proprietary ports on the rear panel for XM and Sirius Satellite Radio connection. In addition to the following optional satellite tuners needed (sold separately), you will need a subscription to XM and/or Sirius Satellite radio. XM Satellite Radio Ready: The receiver can be connected to the optional XM Home Mini-Tuner and Home Dock (part # 700XMTUNPK, sold separately), allowing you to receive XM Satellite Radio through the TX-SR875. You can search XM radio stations by Channel, Category or Direct Tuning. You can also choose to display the following XM information on the receivers display - Channel Name, Channel Number, Category Name, Artist Name or Song Title.Sirius Satellite Radio Ready: The TX-SR875 can also be connected to the optional SiriusConnect Home Tuner kit (part # 607SCH1, sold separately), which allows you to receive Sirius Satellite Radio through the receiver. You can search Sirius radio stations by Channel, Category or Direct Tuning. You can also choose to display the following Sirius information on the receivers display - Channel Name, Channel Number, Category Name, Artist Name or Song Title.iPod Compatible: The DS-A1 or DS-A2 Remote Interactive Dock for iPod (item #s 580DSA1 and 580DSA2) provide an interface between an iPod digital media player and Onkyo TX-SR875. Once the iPod is docked you can control basic functions such as volume control, play, stop, and skip via the Onkyo systems RI-compatible wireless remote control. The dock also charges the battery in the iPod, and allows you to view digital photos and video on an Onkyo home theater system.Audyssey MultEQ XT: MultEQ XT is Audysseys most powerful built-in solution for countering distortion in dedicated home theaters. This technology detects speakers, and then sets levels, delays and crossovers, as well as measuring room acoustics. Using the receiver interface, it takes up to 8 measurements around the listening area and uses high-resolution equalization filters for satellites and subwoofers. MultEQ XT covers both frequency response and time domain (where most of the problems lie) across the entire listening area. The results are immediately obvious - a clear, well-balanced and natural sound. With the supplied speaker setup microphone, Audyssey MultEQ XT can measure the number of speakers connected, their sizes, crossover frequencies, and distances from the listening position and calculate the optimal speaker settings for you automatically. The supplied microphone is approximately 1-15/16 in diameter, 7/8 tall, and has a 19-3/4 cable that plugs into the front of the receiver. There is a threaded insert on the bottom of the microphone so it can be mounted on a tripod for accurate listening position placement. If you wish to setup the speakers manually, you can follow the procedure for Speaker Configuration.Speaker Distance: The distance from your listening position to each speaker can also be set manually. The front speaker distance can be set from 1 to 30 feet in 1-foot increments. The center and subwoofer settings can be up to 5 feet more or 5 feet less than the distance you set for the front speakers (30 feet max). The settings for the surround left, surround right, surround back left, and surround back right speakers are each individually adjustable, and they may be up to 5 feet more or 15 feet less than the distance you set for the front speakers (30 feet max).Speaker Levels: You can manually adjust the level of individual speakers between -12dB and +12dB; -15dB to +12dB for the subwoofer in 0.5 dB steps.Double Bass: You can increase the bass output by activating the Double Bass function. This function feeds both the LFE and left and right channel bass output to the subwoofer. Double Bass can be set only when the subwoofer is set to On and the front speakers are set to Large.Crossover: The TX-SR875 has a built-in crossover for the speaker system. The crossover points are set separately for the front, center, surround, surround back, and subwoofer channels. The sub crossover options are 80(THX), 90, 100, and 120 Hz. The other channels can be set to Full Range, 40, 60, 70, 80 (THX), 90, 100, 120, 150, or 200 Hz. The center and surround speakers can also be turned off.LFE Level and Filter Settings: You can set the level of the LFE channel individually for Dolby Digital, DTS and multichannel PCM sources. The level can be set to -20 dB, -10 dB or 0 dB. You can also specify the cutoff frequency of the LFE channels low-pass filter which can be used to filter out unwanted hum. The LPF only applies to sources that use the LFE channel. You can select from the following low-pass filter frequencies - 80 Hz (THX), 90 Hz, 100 Hz, 110 Hz, or 120 Hz.Equalizer: Using the receivers built-in electronic 7-band equalizer, you can adjust the tone of speakers individually. You can adjust the following frequencies independently for all seven speakers in your system between -6 dB to +6 dB in 1 dB increments - 63 Hz, 160 Hz, 400 Hz 1000 Hz, 2500 Hz, 6300 Hz or 16000 Hz. You can also adjust the following frequencies of the subwoofer between -6 dB to +6 dB in 1 dB increments - 25 Hz, 40 Hz, 63 Hz, 100 Hz or 160 Hz.THX Ultra2 Certified: THX surround technology was founded by George Lucas. THX utilizes stringent standards that ensure movies are reproduced in movie theaters and home theaters just as the director intended. The TX-SR875 offers the following THX surround modes:THX Cinema: carefully optimizes the tonal and spatial characteristics of the soundtrack for reproduction in the smaller home-theater environment, can be used with 2-channel sources processed with other formats and multi-channel sourcesTHX Ultra Cinema: expands 5.1-channel sources for 7.1-channel playback by analyzing the composition of the surround source and optimizing the ambient and direction sounds to produce the surround back channel outputTHX Surround EX: expands Dolby Digital and DTS 5.1-channel sources for 6.1/7.1-channel playback, especially suited to Dolby Digital EX sourcesTHX Music Mode: designed for use with music, expands Dolby Digital and DTS 5.1-channel sources for 6.1/7.1-channel playbackTHX Games Mode: designed for use with video games and can expand a 2-channel and 5.1 channel source for 6.1/7.1-channel playbackNeural THX 5.1/7.1: Neural-THX Surround employs psychoacoustic frequency domain processing, which allows deliver of a more detailed sound stage, with superior channel separation and localization of audio elements. Neural THX 5.1 and Neural THX 7.1 modes can expand any 2-channel stereo source for 5.1 or 7.1 channel playback. It can be used with CD, AM/FM radio, XM Satellite Radio, cassette, TV, VHS, DVD and other 2-channel stereo sources, including video games.Stereo, Dolby and DTS Listening Modes: This receiver incorporates a powerful and highly accurate 32-bit DSP processor and a wide variety of listening modes to bring you maximum enjoyment from your audio and video software. The listening modes include:Direct: audio from the input source is output directly with minimal processingPure: In this mode the display and video circuitry are turned off, minimizing possible noise sources for the ultimate in high-fidelity reproduction.Stereo: sound is output from the front left and right speakers and subwooferMono: monaural sound is output from the front left and right speakers and subwooferMulti-channel: 7.1-channel analog inputDolby Pro Logic II: expands any 2-channel source to 5.1 channelsMovieMusicGameDolby Pro Logic IIx: expands any 2-channel source to 7.1 channelsMovieMusicGameDolby Digital: decodes Dolby Digital soundtracksDolby Digital EX: decodes Dolby Digital EX or expands 5.1-channel Dolby Digital sources to 6.1 or 7.1-channelsDolby Digital Plus: multi-channel audio format that supports up to 7.1 channels with 48 kHz sampling rateDTS: decodes DTS soundtracksDTS 96/24: decodes high resolution DTS 96/24 soundtracksDTS-ES: decodes DTS ES soundtracksDiscreteMatrixDTS-HD High Resolution: multi-channel format supporting up to 7.1 channels with 96 kHz sampling rateDTS-HD Master Audio: offers up to 7.1 discrete channels of digital audio with 48/96 kHz, up to 5.1 channels with 192 kHz sampling rateDTS Neo:6: expands any 2-channel source to 6.1 or 7.1-channelsCinemaMusicDSD: used with SACDs/ that feature mult-channel audioTrueHD: delivers exceptional sound that is bit-for-bit identical to the studio master, unlocking the true high-definition entertainment experience on next-generation discsNeural Surround: allows delivery of a more detailed sound stage, with superior channel separation and localization of audio elements for 5.1 or 7.1 multi-channel surround playbackOnkyo Original DSP Modes:Mono Movie: suitable for old movies or other mono sourcesOrchestra: for classical or operatic musicUnplugged: for acoustic instruments, vocals, and jazzStudio-Mix: suitable for rock or popTV Logic: adds realistic acoustics to TV showsAll Ch Stereo: ideal for background musicFull Mono: all speakers output the same sound in monoTheater-Dimensional (T-D): enjoy virtual 5.1 surround with two or three speakers (you can set the virtual surround imaging to Narrow or Wide)Note: You can assign a default listening mode to each input source that will be selected automatically when you select each input source.Combination Surround Modes: You to choose from the following combination surround modes:Dolby Digital + PLIIx Music: uses the Pro Logic IIx Music mode to expand 5.1-channel Dolby Digital sources for 6.1/7.1-channel playbackDolby Digital + PLIIx Movie: uses the Pro Logic IIx Movie mode to expand 5.1-channel Dolby Digital sources for 7.1-channel playbackDTS + Dolby Digital EX: expands 5.1-channel DTS sources for 6.1/7.1-channel playback, especially suited to Dolby Digital EX soundtracks that include a matrix-encoded surround back channel.DTS + PLIIx Music: uses the Pro Logic IIx Music mode to expand 5.1-channel DTS sources for 6.1/7.1-channel playbackDTS + PLIIx Movie: uses the Pro Logic IIx Movie mode to expand 5.1-channel DTS sources for 7.1-channel playbackDolby Pro Logic II & IIx Music Modes: While listening in the Dolby Pro Logic II or IIx Music format, there are three further enhancements you can adjust:Panorama: broadens the front stereo image to the surround speakers to provide a wraparound effect, especially effective when there is limited output from the surround channels, panorama can be turned on/off in the menuDimension: allows you to move the sound field forward or backwardCenter Width: allows you to adjust the width of the center channelCenter Image: In the DTS Neo:6 Music mode, the Center Image feature adjusts the output of the left and right channels relative to the center channel, allowing you to make the center channel more or less dominant as needed. This improves the image of the center channel, especially when the listener is off-center. Adjustment varies from 5 (nothing subtracted from the L/R channels) to 0 (L/R channel output is cut in half).Re-Equalization Circuitry: Re-EQ (re-equalization) corrects a soundtrack with high frequency response thats too harsh, compensating for the fact that sound mixed for large theaters may sound too bright when played back through speakers in the home environment. This can be set to either On or Off.Bass and Treble: You can adjust the bass and treble for the front speakers. You can boost or cut low-frequency (20Hz) sounds output by the front speakers from -10 to +10 dB in 2 dB steps. You can boost or cut high-frequency (20kHz) sounds output by the front speakers from -10 to +10 dB in 2 dB steps.Late Night Feature: The Late Night feature limits the dynamic range of Dolby Digital recordings. Limiting the dynamic range makes it easier to find a volume that ensures the quiet sounds are not too quiet and the loud sounds are not too loud for night time listening. This allows you to comfortably listen to without the need to constantly adjust the volume to keep from waking family/neighbors. The choices are: Off, Low, and High.Note: This feature only works with Dolby Digital Encoded software and the depth of the feature will vary based on the individual software package.A/V Sync: When the picture is not perfectly synchronized with the sound, this receiver can delay the audio from 0-250ms, in 1ms increments.IntelliVolume: The IntelliVolume setup function allows you set a volume correction value in the range of -12dB to +12dB, in 1dB increments, for each source to prevent large jumps in volume when switching from one source to another. This feature eliminates the inconvenience of manually readjusting the volume control each time you switch from a source with a weak signal to a source with a strong signal and vice versa.Volume Setup: The receiver volume can be configured in the following ways:Maximum Volume: prevent the volume from being turned too high by setting a maximum level for Zone 1, Zone 2 and Zone 3; specify any volume in the top half of the volume rangePower On Volume: specify the volume setting when the receiver is turned on for Zone 1, Zone 2, or Zone 3; specify any volume or Last to use the same level that was used when the receiver was turned off.Headphones Level: set the headphone volume relative to the main volume, choose a level between -12dB and +12dBName Edit: You can enter a custom name for each individual input selector and radio preset for easy identification.Bi-Amp Speaker Connections: The Front Left/Right and Surround Back Left/Right terminal posts can be used together to bi-amp a front pair speakers that support bi-amping, providing separate tweeter and woofer power feeds, giving you improved bass and treble performance. When bi-amping, the Front Left/Right terminal posts connect to the front speakers tweeter terminals while the Surround Back Left/Right terminal posts connect to the front speakers woofer terminals. During bi-amping, the receiver is able to drive up to a 5.1 speaker system.Multi-room Capability: You can use three speaker systems with the TX-SR875 receiver - a surround-sound speaker system up to 7.1 channels in your main listening room (Zone 1), an audio/video stereo speaker system in a second room (Zone 2) and an audio only stereo speaker system in a third room (Zone 3). The zone 2 and 3 outputs allow you to enjoy one source in your main listening room, while other sources play in remote rooms. Depending on how you configure the receiver, using Zone 2 will require an additional monitor, amplifier and speakers, a set of powered speakers, or simply a set of non-powered speakers located in a remote location. You can connect the dedicated Zone 2 stereo AV RCA line outputs to a receiver/amplifier or powered speakers along with a monitor in one room while powering a 7.1-channel speaker system in the main room; the output level of the RCA line outs for Zone 2 and Zone 3 can be switched from fixed for variable, so they can be connected to an amplifier or powered speakers equipped with or without a volume control. You can also connect a pair of speakers to the receivers dedicated Zone 2 speaker terminals and simultaneously power a 5.1-channel speaker system in the main room. When the Zone 2 speaker terminals are turned on, the Surround Back speaker outputs do not work. When the Zone 2 speaker terminals are off, the Surround Back speaker outputs work as normal. The Zone 2 speaker output volume setting can be controlled with the remote. Only analog sources can be played in Zone 2 or Zone 3. Zone 3 requires an additional amplifier and speakers or a set of powered speakers to listen to a different 2-channel stereo source in another room while still playing 2-channel audio in Zone 2 and multi-channel audio in your main room (Zone 3 does not offer speaker terminal connection).Sleep Function: From the remote, you can set the unit to automatically turn off after as much as 90 minutes or as little as 10 minutes; choices are presented in 10-minute increments.Display Dimmer: The display illumination includes the green alphanumeric display and a blue ring around the volume knob. You can dim the display as follows: Normal and Volume light on, Normal and Volume light off, Dim and Volume light off, and Dimmer and Volume light off.Lock Setup: With this feature, you can protect your settings by locking the setup menus.Remote ControlMulti-brand/Learning Remote with Joy Stick Button: The supplied wireless remote is a multi-brand/learning remote. The remote is pre-programmed to operate Onkyo components. In addition, the remote is pre-programmed to operate other popular brands of equipment, including DVD players, CD players, TVs, VCRs, cable boxes, MD recorders/players, and satellite receivers. Also, the remote can learn up to 90 commands from infrared remotes of other components. A joystick button simplifies menu navigation and doubles as an enter button.Macros: Three macros can be programmed to perform a sequence of actions with just one button press. Each macro button can perform up to 8 commands.Input and Output NotesRear Panel:HDMI Inputs/Output: This unit has 4 HDMI inputs and 1 HDMI output. The HDMI inputs are assignable to different input sources. The HDMI jacks support HDCP copyright protection. The HDMI circuit will accommodate a 1080p signal.Assignable Digital Inputs: The TX-SR875 has 5 assignable digital inputs (2 optical/3 coaxial) allowing you to specify which input source is connected to which digital input jack.Multi-Channel Input: The receiver is equipped with one set of 8 Channel RCA type inputs for use with outboard 5.1 and 7.1 channel decoders. There are RCA inputs for left front, right front, center, left surround, right surround, surround back left, surround back right, and subwoofer.Speaker Terminals: There are color-coded binding post connectors for the left front, right front, center, left surround, right surround, left surround back, and right surround back speakers. The binding posts are not 5-way because a plastic collar prevents their use with spade lugs. The Zone 2 left and right speakers are also binding posts.XM: This proprietary jack is for use with an optional XM Mini Tuner Home Dock.Sirius: This proprietary jack is for use with an optional Sirius SureConnect Home Kit.IR Input/Output: The 3.5mm IR input jack allows you to control the receiver without line-of-sight access using an optional IR remote control system and locating the remote sensor in sight. The 3.5mm IR output jack allows you to send the control signals to an additional component.RI Remote Control Jack: The 3.5mm RI (Remote Interactive) remote control jack allows you to connect this receiver to compatible Onkyo components.12 Volt Trigger: This 3.5mm mini-jack output can be connected to the 12-volt trigger input on a power amplifier in Zone 2. When Zone 2 is turned on, a 12-volt trigger signal is output.RS-232C Port: The TX-SR875 has an RS-232C port for connection to external whole-house control systems from companies such as AMX or Crestron.Front Panel: The units front panel connections are located behind a manual fold-down door.Headphone Output: This receiver has a standard 1/4 headphone output on the front panel. The speaker outputs, except for the Zone 2 speakers, are muted when headphones are plugged in.AV Aux Input: The receiver features a composite video and S-video inputs as well as Left/Right stereo RCA audio inputs on the front panel.Digital Input: The receiver also features an optical digital input on the front panel.Setup Mic: This 3.5mm input on the front of the receiver is used to connect the supplied Setup Microphone.

Up for sale is an Onkyo RC-690M A/V Receiver Remote in excellent condition. This is the original remote that was supplied with models TX-SR875 TX-SR805. I have thoroughly tested this remote and guarantee it to arrive in working condition. Please feel free to email me with any questions you may have. Thanks in advance for your purchase.

This is a set of 4 legs/feet for the Onkyo TX-SR875 AV Receiver. Part # is 5419. excellent condition.

This is a front panel/board/PCB with LCD display for the Onkyo TX-SR875 AV Receiver. Part # is NCDIS-9085. Tested to be in excellent, fully working condition.

This is a step-down power transformer pulled from an Onkyo TS-XR875. It is rated 120VAC primary and 96V; 70V; 40V; 24-0-24V; 16-0-16V; 11V; and 6V secondary. It has 10 secondary wires. Measures 4 x 5 x 6 and weighs 18 lbs. Power rating is 1100VA. All leads are labeled. In fully working condition.

This is a volume knob for the Onkyo TX-SR875 AV Receiver. Measures 53mm wide and 29mm high. excellent condition.

Onkyo TX-SR875 7.1 Channel Home Theater Receiver Nice working condition. Tested. Remote not included Ships FREE

This is a front side face panel for the Onkyo TX-Sr875 AV Receiver. Excellent condition.

item its in very good working and physical condition, shipping to the lower 48 states only. 100% working, see pictures for more details.

This remote control is an essential accessory for Onkyo PR-SC886, TX-SR805, and TX-SR875 sound systems. With its compatibility with Onkyo products, you can easily replace a lost or damaged remote and continue to enjoy your audio experience. The Onkyo RC-690M remote control has all the necessary buttons to control your sound system, from adjusting the volume to selecting the input source. This remote control is the perfect addition to your home theater system, allowing you to control your audio without leaving your seat. Its sleek design and user-friendly interface make it easy to operate and a must-have for any Onkyo sound system owner. Get your hands on the Onkyo RC-690M remote control today and elevate your audio experience.

. superb from a smoke free home AND JUST SO MUCH IN THIS MAGAZINE CYRUS 8vs2/8/psxr ONKYO TX-SR875 KEF IQ55SE DMN RESON QUAD 99/909

Here we have a monster of a THX Surround Sound receiver from Onkyo the TX-SR875 - 150W per channel in 7.1. It is working on all sound settings, but has developed a display issues (not showing on LED screen) but everything does appear on the TV to help select the correct input/set contolls and other settings. Therefore it does need some attention buy I am reliably informed that the display can be just a lose connection or a simple fix at a local repairist. I have therefore priced this receiver accordingly. Comes with original remote, original paper instruction book and internal aerial. Onkyo TX-SR875 Surround Sound Receiver | Sound & Vision (soundandvision.com) intl.onkyo.com/downloads/product_info/pdf/tx-sr875_ex_leaflet.pdf User manual Onkyo TX-SR875 (English - 120 pages) Listed with no reserve for only £30.00 (to reflect display issue) and from a smoke free home. Originally a £999 price when released back in 2008. Owned from new. Ideally this would benefit from collection (AS IT WEIGHS 28KG before packaged) but will send by courier if buyer wishes (price to be calculated and added to final sale price), but ideally it would be better if collected. From smoke free home.

. superb from a smoke free home AND JUST SO MUCH IN THIS MAGAZINE CYRUS 8vs2/8/psxr ONKYO TX-SR875 KEF IQ55SE DMN RESON QUAD 99/909