As always, I welcome International buyers. I offer Global an International Standard Shipping on this item. This listing is for 1 used spring housing leg for a 1970s Transcriptors Saturn turntable. Leg measures 1 1/2” diameter, 2 1/2” tall, 3 5/8 to the top of the spring collar, 6 to the top of the shaft and it weighs 3.9 oz. Cosmetics are very good showing only minor wear/scratches. Transcriptors made a several different type legs, be sure to compare the measurements and photos below for the one you want/need, there are no returns. I have only 1 of this type. Packed box will weigh 15 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Listing is for only this leg. It measures 1 1/2” diameter, 2 1/2” tall, 3 5/8 to the top of the spring collar, 6 to the top of the shaft and it weighs 3.9 oz.

As always International Buyers are welcome to participate. Buyers choice of two of the three counterweight pictured for 1970s Transcriptors Vestigal tonearm. Cosmetics are excellent, they are indeed unused. This listing is for the buyers choice of two chrome or brass Vestigal Arm counterweight of the three shown. Although there are only two different heights and weights, all 3 weights are slightly different. All were made for and used on the Vestigal Arm. Sizes, weight and description left to right. Dimensions are given with the nuts in the upright position with threaded hole facing up. #1 1/2 wide, 3/8 tall. Knurled chrome nut with wide cut pattern. Weight 8 gram. #2 1/2 wide, 3/8 tall. Knurled chrome nut with narrower cut pattern. Weight 8 gram. #3 1/2 wide, 5/16 tall. Knurled brass nut with narrower cut pattern. Weight 6 gram. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes worldwide include insurance and packing materials.

As always International Buyers are welcome to participate. Buyers choice of one counterweight with original threaded rod and set screw for 1970s Transcriptors Vestigal tonearm. Cosmetics are excellent, they are indeed unused. This listing is for the buyers choice of only one chrome or brass Vestigal Arm counterweight/rod assembly of the three shown. Although there are only two different heights and weights, all 3 counterweights are slightly different. All were made for and used on the Vestigal Arm, the threaded rods/set screw are all the same. Sizes, weight and description left to right. Dimensions are given with the nuts in the upright position with threaded hole facing up. #1 1/2 wide, 3/8 tall. Knurled chrome nut with wide cut pattern. Weight 8 gram. #2 1/2 wide, 3/8 tall. Knurled chrome nut with narrower cut pattern. Weight 8 gram. #3 1/2 wide, 5/16 tall. Knurled brass nut with narrower cut pattern. Weight 6 gram. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes worldwide include insurance and packing materials. Here are the same counterweights shown close up.

As always, I welcome International buyers. I offer Global and International Standard Shipping on this item. One lot of 3 unused aluminum motor board caps/nuts/retainers for 1970s Transcriptors Skeleton turntable. Cosmetics are excellent plus. This listing is for one group of the 3 caps shown below. Transcriptors made 3 different sets of motor board caps/nuts/retainers for their Skeleton turntables over the years. I have only 1 of the 3 types they made that may be a match to your table. Sizes/features 3/8 diameter flat top, between 5/16 - 3/8 tall, smooth finish They all have the same thread size. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes worldwide include insurance and packing materials. As always International Bidders are welcome to participate. Sizes/features 3/8 diameter flat top, between 5/16 - 3/8 tall, smooth finish They all have the same thread size. There are now 12 sets of 3 left, this bag is no longer this full. If you need them you might want to order as soon as possible before none are available.

International Buyers: I am offering eBay’s Global Shipping on this listing. This listing is for 1 vintage 1970s Transcriptors 60 Hz belt pulley for Skeleton and Saturn turntable used in the USA and Canada. etc. These turntables will work on both 110 and 220 voltages but use different motor/belt pulleys to run at the correct speed. The 60 HZ pulley is 3/4 in diameter at the widest. You must chose 1 from the 3 types below and ask for type 1, 2 or 3 when you make payment or through eBay email. U.S. models run on 110 volts, 60 Hz. If you bought a Skeleton or Saturn that was used in the UK or Europe and want to use it in the U.S. or Canada you must move the AC connector from 220 volts to 110 volts and replace the 50 Hz belt pulley with one of the 60 Hz ones shown below. Comes as shown, you will have to reuse the screw and adapter that is on the motor shaft or press type 3 directly on to the shaft. These are unused, new old stock items from the 1970s, not reproductions. I bought these parts directly from a Transcriptors distributor in Milwaukee, WI many years ago. As always, the pictures below are of the actual parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes in the U.S. and Global Shipping all come with insurance. The 60 Hz. pulleys are for these two types of turntables. You must chose 1 from the 3 types below and ask for type 1, 2 or 3 when you make payment or through eBay email. #1 is on the left, #2 in the center and #3 is on the right in the 6 photos below. See close-ups of each type below these pictures. Type #1 Type #2 Type #3

As always, I welcome International buyers. I offer Global Shipping and International Standard Delivery on this item. One stay rod spring and housing for a 1970s Transcriptors Skeleton turntable. Cosmetics are excellent and appear unused, new old stock. Spring measures just under 1/2 in diameter. This spring does not fit in the hole in every stay rod housing Transcritors made. This is why I am including the housing it does fit. There are no returns for any reasons. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. The spring and housing I am offering. This spring and housing goes with a stay rod assembly as shown in pictures below. None of these parts are included in the listing.

As always International Buyers are welcome to participate. Buyers choice of one counterweight for 1970s Transcriptors Vestigal tonearm. Cosmetics are excellent, they are indeed unused. This listing is for the buyers choice of only one chrome or brass Vestigal Arm counterweight of the three shown. Although there are only two different heights and weights, all 3 weights are slightly different. All were made for and used on the Vestigal Arm. Sizes, weight and description left to right. Dimensions are given with the nuts in the upright position with threaded hole facing up. #1 1/2 wide, 3/8 tall. Knurled chrome nut with wide cut pattern. Weight 8 gram. #2 1/2 wide, 3/8 tall. Knurled chrome nut with narrower cut pattern. Weight 8 gram. #3 1/2 wide, 5/16 tall. Knurled brass nut with narrower cut pattern. Weight 6 gram. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes worldwide include insurance and packing materials.

As always, I welcome International buyers. I offer Global an International Standard Shipping on this item. This listing is for 1 used spring housing leg for a 1970s Transcriptors Skeleton turntable Spyder support. It is #4 of the 4 types shown in the last group of pictures below The one you will receive is shown in the first 5 photos below. It measures 1 1/2” diameter, 2 1/2” tall, 3 to the top of the spring collar disc, not including the height adjuster disc and threaded rod. Weighs 3.5 oz. Notice it does not have a hole drilled in to the cylinder as all the other types do. Cosmetics are very good showing only minor wear/scratches. Included in this listing is one height adjuster disc and one threaded rod. Disc measures 1” diameter at the widest, 3/4 in diameter on top and the height is 1/4. The threaded rod measures 1 1/4 long. Transcriptors made a several different type legs, be sure to compare the measurements and photos below for the one you want/need, there are no returns. I have only 2 of this type. Packed box will weigh 15 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. The leg assembly you will receive is shown in the first 5 photos below. It measures 1 1/2” diameter, 2 1/2” tall, 3 to the top of the spring collar disc, not including the height adjuster disc and threaded rod. Weighs 3.5 oz. Notice it does not have a hole drilled in to the cylinder as all the other types do. Be sure of the leg you need, there are no returns. I have 4 different types as seen below. Legs measurement are from the far left, #1 to the far right, #4, they are in the same order in all 6 photos. Measurements do not include the threaded shaft on the bottom. #1) 1 1/2” diameter, 2 1/2” tall, 3 5/8 to the top of the spring collar and weighs 3.9 oz. #2) 1 1/2” diameter, 2 1/2” tall, 4 to the top of the spring collar and weighs 4.2 oz. #3) 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the sprig collar and weighs 3.7 oz. #4) 1 1/2” diameter, 2 1/2” tall, 3 to the top of the spring collar and weighs 3.3 oz. Notice it does not have a hole drilled in to the cylinder as all the other types do.

Michell GyroDec Belt Drive Turntable, audiophile TT, j a michell, transcriptors. This has been one of my personal turntables for the last 20 years, I have multiple turntables from J A Michell so I’m just thinning the herd. Great audiophile table, comes with everything you need, ortofon red cartridge with lots of life left. To earn with the ground built into the rca’s Really awesome table I prefer local pick up in the NY tristate area as I do not have the original box to ship it in If you would need this shipped, please contact me for details and I’ll try to figure out what the cost would be