Technics EPA-250 Description Operation checkPlease refer to the product images for product condition.We have also checked the operation with our equipment. Please be assured that there is no problem in operation.We have checked the operation of items such as output from both channels, lowering of the lifter, and height adjustment.In the unlikely event of an initial malfunction, please be assured that you can return the product free of charge within 30 days of arrival.AccessoryPHONO cableSub weightArm fixing screws x 3Instruction manualTemplatePackagingWhen exporting overseas, we will ship the product in reinforced cardboard boxes to prevent damage during transportation. If the product comes with its original box, we will ship it with the original box protected. PrecautionsWhen using the product, please check the voltage supported by the product and the voltage in your area carefully. If the voltage is different from the product specifications, not only will the product not function properly, it may also damage the equipment. About Handling TimeShips within 5 business day.Please note that Saturdays, Sundays, and holidays do not count as business days.About Shipping PolicyWe ship via FedEx, DHL or Japan Post.International Buyers - Please Note:Duties, taxes, and fees are not included in the product price or shipping cost. You are responsible for paying any duties, taxes, or fees that may be incurred when importing products into your country. We also recommend that you check with your customs office in advance of your purchase to determine how much these additional costs will be.

For sale is beautiful Technics EPA-A250 Tonearm Pipe, Arm Unit with original headshell for EPA-B500 base sitting in a box from EPA-501H tonearm box in excellent condition.

For sale is Technics EPA-B500 tonearm base unit that works with EPA-A250 and A501 + A505 armwands. This base unit was part of a very advanced and versatile tonearm system that Technics created. Because you can use many different arms with this unit it works perfectly with all kinds of cartridges. This base is in excellent condition, as you can see in the provided pictures. The antiskate wheel turns freely and smoothly, and the vertical height adjustment is also very smooth. Cueing is smooth as well. It comes with the original mounting hardware. You can use standard RCA cables with this unit and a ground cable can be used that has a standard male RCA end. Please note that no armwands are included, but I do have an original RCA cable, EPA-A250 and a EPA-A501E wands up for sale in separate auctions. If you have any questions, please send me a message. I will be certain to package this EPA-B500 base unit with incredible care using lots of high quality foam and packing and a sturdy new cardboard box. Thanks so much and have a great day!

Turntable base for Technics SP-10mkII and SP-20. With the structure of natural obsidian with large specific gravity and excellent vibration characteristics, visco-elastic material and wood base, excellent vibration isolation characteristics are obtained. Uses a large insulator with improved vibration isolation characteristics. Includes a removable acrylic molded dust cover. Already installed is a Tecnics EPA-A50 tonearm and Stanton 881-S cartridge. All you need is the turntable. ________________________________________________________________________________________________________ (If purchased for shipping out of U.S.A. additional taxes and duties may be added to price)

Turntable base for Technics SP-10mkII and SP-20. With the structure of natural obsidian with large specific gravity and excellent vibration characteristics, visco-elastic material and wood base, excellent vibration isolation characteristics are obtained. Uses a large insulator with improved vibration isolation characteristics. Includes a removable acrylic molded dust cover. Already installed is a Tecnics EPA-A50 tonearm and Stanton 881-S cartridge. All you need is the turntable. ________________________________________________________________________________________________________ (If purchased for shipping out of U.S.A. additional taxes and duties may be added to price)

DescriptionOperation:Operation has been confirmed:Output from both channelsSpeed of lifter descentThe feel and adjustment of various controlsHeight adjustment, etc.There are no operational issues.Product Details:Manufacturer: TechnicsModel Number: EPA-B500/EPA-A501HArm Unit: EPA-A501H (Straight Arm)Accessories:Lead wires x4 (pre-installed)PHONO cable (Technics)Arm fixing screws x3Instruction manual (copy)Template (copy)The black stand used for photography to hold the arm upright is not included. If you have any question or concern, please do not hesitate to contact me : ) ShippingStandard Shipping (FedEx, Japan Post)We usually ship out your order within 5-7 working days after receiving your payment.The package will arrive about 3 - 10 days after shipment.Pack carefully : ) International Buyers - Please Note?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. ?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.

Technics EPA-100 Tonearm Antiskating knob as seen here Worldwide standard shipping with tracking nr -friendly custom declaration for all buyers -

Turntable base for Technics SP-10mkII and SP-20. With the structure of natural obsidian with large specific gravity and excellent vibration characteristics, visco-elastic material and wood base, excellent vibration isolation characteristics are obtained. Uses a large insulator with improved vibration isolation characteristics. Includes a removable acrylic molded dust cover. Already installed is a Tecnics EPA-A50 tonearm and Stanton 881-S cartridge. All you need is the turntable. ________________________________________________________________________________________________________ (If purchased for shipping out of U.S.A. additional taxes and duties may be added to price)

Technics headshell for phono cartridge EPA 100 tonearm turntable

Turntable base for Technics SP-10mkII and SP-20. With the structure of natural obsidian with large specific gravity and excellent vibration characteristics, visco-elastic material and wood base, excellent vibration isolation characteristics are obtained. Uses a large insulator with improved vibration isolation characteristics. Includes a removable acrylic molded dust cover. Already installed is a Tecnics EPA-A50 tonearm and Stanton 881-S cartridge. All you need is the turntable. ________________________________________________________________________________________________________ (If purchased for shipping out of U.S.A. additional taxes and duties may be added to price)

For sale is beautiful Technics EPA-A250 Tonearm Pipe, Arm Unit with original headshell for EPA-B500 base sitting in a box from EPA-501H tonearm box in excellent condition.

For sale is Technics EPA-B500 tonearm base unit that works with EPA-A250 and A501 + A505 armwands. This base unit was part of a very advanced and versatile tonearm system that Technics created. Because you can use many different arms with this unit it works perfectly with all kinds of cartridges. This base is in excellent condition, as you can see in the provided pictures. The antiskate wheel turns freely and smoothly, and the vertical height adjustment is also very smooth. Cueing is smooth as well. It comes with the original mounting hardware. You can use standard RCA cables with this unit and a ground cable can be used that has a standard male RCA end. Please note that no armwands are included, but I do have an original RCA cable, EPA-A250 and a EPA-A501E wands up for sale in separate auctions. If you have any questions, please send me a message. I will be certain to package this EPA-B500 base unit with incredible care using lots of high quality foam and packing and a sturdy new cardboard box. Thanks so much and have a great day!

Technics EPA-250 tone arm In great used condition Comes with an universal arm base EPA-B500 Comes as pictured Pls also see close up images for greater detail and feel free to contact us with any questions. Will carefully pack and quick shipping via FedEx ground.

Turntable base for Technics SP-10mkII and SP-20. With the structure of natural obsidian with large specific gravity and excellent vibration characteristics, visco-elastic material and wood base, excellent vibration isolation characteristics are obtained. Uses a large insulator with improved vibration isolation characteristics. Includes a removable acrylic molded dust cover. Already installed is a Tecnics EPA-A50 tonearm and Stanton 881-S cartridge. All you need is the turntable. ________________________________________________________________________________________________________ (If purchased for shipping out of U.S.A. additional taxes and duties may be added to price)

For sale is Technics EPA-B500 tonearm base unit that works with EPA-A250 and A501 + A505 armwands. This base unit was part of a very advanced and versatile tonearm system that Technics created. Because you can use many different arms with this unit it works perfectly with all kinds of cartridges. This base is in excellent condition, as you can see in the provided pictures. The antiskate wheel turns freely and smoothly, and the vertical height adjustment is also very smooth. Cueing is smooth as well. It comes with the original mounting hardware. You can use standard RCA cables with this unit and a ground cable can be used that has a standard male RCA end. Please note that no armwands are included, but I do have an original RCA cable, EPA-A250 and a EPA-A501E wands up for sale in separate auctions. If you have any questions, please send me a message. I will be certain to package this EPA-B500 base unit with incredible care using lots of high quality foam and packing and a sturdy new cardboard box. Thanks so much and have a great day!

Technics EPA-B500 EPA-A501H Dynamic Damping Universal System Tonearm Pickup Arm Domo Arigato! Welcome, Thank you for your visit. Description Universal type system tone arm that combines the EPA-B500 tone arm arm base unit and the EPA-A501H tone arm unit. The EPA-A501H is an arm unit for high compliance cartridges. Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. *The black pedestal of the base is for photographic purposes only and is not included.*There is no original box.*Turntables and other equipment (excluding accessories for the unit) shown in the photos are for presentation purposes only and are not part of the product. Specifications < Tone Arm Base Unit EPA-B500 >Type: Arm replacement type arm baseBearing structure: Gimbal suspension systemHeight adjustment range: 42mm-62mm (from base mounting surface to pipe center), helicoid: 20mmInitial sensitivity: 7mg or less (horizontal, vertical)Output cord DC resistance: 39.5m?/mOutput cord capacitance: 41.5pF/mArm base mounting hole: ?62mm < Tone Arm Unit EPA-A250 >Type: Dynamic damping type arm unitArm effective length: 250mmArm rear length range: max. 93mm (from arm fulcrum)Overhang: 15mmHorizontal tracking error angle: +1?6(inner circumference of 30cm record), +2?6(outer circumference of 30cm record)Arm effective weight: 14g (without cartridge)Stylus pressure adjustment range: 0 to 2gHead shell weight: 7.5gCompatible cartridge weight: 6g~8g, 3g~6g(with shell weight), 10.5g to 12.5g (with auxiliary weight) Accessories PHONO cableArm fixing screws x 3Instruction Manual (copy) (Japanese)Template (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

For sale is beautiful Technics EPA-A250 Tonearm Pipe, Arm Unit with original headshell for EPA-B500 base sitting in a box from EPA-501H tonearm box in excellent condition.

Turntable base for Technics SP-10mkII and SP-20. With the structure of natural obsidian with large specific gravity and excellent vibration characteristics, visco-elastic material and wood base, excellent vibration isolation characteristics are obtained. Uses a large insulator with improved vibration isolation characteristics. Includes a removable acrylic molded dust cover. Already installed is a Tecnics EPA-A50 tonearm and Stanton 881-S cartridge. All you need is the turntable.

For sale is beautiful Technics EPA-A250 Tonearm Pipe, Arm Unit with original headshell for EPA-B500 base sitting in a box from EPA-501H tonearm box in excellent condition.

Product details Manufacturer: Technics model: EPA-B500 straight arm pipe EPA-A501H accessories ?Accessories and attached parts are all in the image. Please confirm. Condition slays/dents can be seen, but there are no noticeable major scratches. The cable is hardened. There is no operation trace from both CHs. The drop speed of the lifter is also smooth. Anti-skating/height adjustment is also possible. When confirming the operation conditions above. Since it is a used product that has been a long time, it is not possible to determine whether you retain the performance of the new product. Please check the product other than induction, please check the product. Please check the product/commit the product using it in the image. For electrical appliances, please make sure that they can be used in your country before purchasing. Shipping I ship by the price and means of [shipping] under the product price. Also, please note that if it says “Does not ship to your country” it will not be shipped as shown. *We can not use EMS service for some countries in Central Asia PaymentPlease pay within 3 days after the auction closed.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.ReturnCustomer service and satisfaction are very important to us. Returns are accepted ONLY if the item was not the item described. I have an unconditional return policy if nortified within 30 days of the receipt of the item. All returned items must be the original condition. All return request must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me. The postage of the returned goods is a buyer burden.Thank you for coming.!! Dont hesitate to ask me any questions. ? If you find any issue with this transaction, please contact me first . I will try my best to resolve the issue. ? I have examined the item(s) and included my observations as accurate as I could in the description above. Please note that some descriptions may be based on my own opinion. Please read it carefully and understand the condition of the item(s) before you buy item (s)

Item Description Technics Technics EPA-100 Tone Arm ?Status As this is a used item, please forgive any signs of use such as scratches or dirt. Sound output has been confirmed. The cable is dirty. Please note that the item will be delivered in its current condition. It is used, but it is a good item. As it is an old work, please understand the dirt of aging deterioration. Pack tightly to avoid breakage. Shipping We ship to Worldwide. I ship only to the address registered your PayPal account. Shipping method: DHL or Fedex or Japan Post You cannot choose the delivery company. Please understand in advance. Delivery date Example: US 5 days to 1 week (excluding weekends) Visa numbers are required in some countries. Please prepare in advance. Payment Payment within 24 hours after winning the bid Other term International Buyers Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -?do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. I do not want to pay because taxes are expensive. It can not be returne for reasons such as. Please understand in advance.

Turntable base for Technics SP-10mkII and SP-20. With the structure of natural obsidian with large specific gravity and excellent vibration characteristics, visco-elastic material and wood base, excellent vibration isolation characteristics are obtained. Uses a large insulator with improved vibration isolation characteristics. Includes a removable acrylic molded dust cover. Already installed is a Tecnics EPA-A50 tonearm and Stanton 881-S cartridge. All you need is the turntable.

Technics EPA-102T PLUSARM Static Balance Type Tonearm Pickup Arm Vintage Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. This tone arm is designed to be attached to the outer circumference of a player cabinet and can be used with Technics SL-1100, SL-110, SL-1200, SL-120, SL-35, SL-45, etc. It may be used with players of other manufacturers as long as they are 32 to 41 mm thick and have similar external dimensions. Specifications Type: Statically BalancedEffective length: 242mmOverhang: 15mmTracking error: +2.1°(record circumference) 0°(record circumference)Needle pressure range: 0 to 2.5g (graduated for Technics cartridges) 0 to 3.5g (direct reading variable)Cartridge weight: 5 to 16g Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

For sale is Technics EPA-B500 tonearm base unit that works with EPA-A250 and A501 + A505 armwands. This base unit was part of a very advanced and versatile tonearm system that Technics created. Because you can use many different arms with this unit it works perfectly with all kinds of cartridges. This base is in excellent condition, as you can see in the provided pictures. The antiskate wheel turns freely and smoothly, and the vertical height adjustment is also very smooth. Cueing is smooth as well. It comes with the original mounting hardware. You can use standard RCA cables with this unit and a ground cable can be used that has a standard male RCA end. Please note that no armwands are included, but I do have an original RCA cable, EPA-A250 and a EPA-A501E wands up for sale in separate auctions. If you have any questions, please send me a message. I will be certain to package this EPA-B500 base unit with incredible care using lots of high quality foam and packing and a sturdy new cardboard box. Thanks so much and have a great day!