Restored Thorens TD160 Turntable Limited Edition Surfblue MetallicThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/240V or 110V/120V (for example USA and world wide) Restored 160 Surfblue MetallicHigh gloss finishAlso possible with SME tonearmOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            metalPlate bearing:            10mmBasic dimensions:          Width: 54cm, depth: 45cm, height 15cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, surface surfblue metallicOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Audio RCA cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.  Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (we offer the appropriate pickups on request): SME 3009 improved: 690 SME 3009 S2 improved: 690 SME Series III: 690 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Limited Edition Caliente Red MetallicThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/240V or 110V/120V (for example USA and world wide) Restored 160 Caliente Red MetallicHigh gloss finishAlso possible with SME tonearmOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            metalPlate bearing:            10mmBasic dimensions:          Width: 54cm, depth: 45cm, height 15cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, caliente red metallic surfaceOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Audio RCA cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.  Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (we offer the appropriate pickups on request): SME 3009 improved: 690 SME 3009 S2 improved: 690 SME Series III: 690 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable IN White Piano LacquerThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! RESTORED by ART-AND-SOUND Restored 160 in white high gloss finishWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalBearing mandrel: 10mm Audio cable: permanently installed on the turntableBasic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. Faceplate:Cover plate made of 1mm demagnetized stainless steel (brushed) with labelingThe Ortofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:Painted in housing colorSpikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). --------The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM including installation: Ortofon 2M Blue (elliptical, naked): €219 Ortofon 2M Bronze (fine line): €360Ortofon Vinyl Master Silver (Fritz Gyger): €490Cartridge MC including installation:Quinted Bronze (fineline diamond cut): €640The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Thorens TP63 Tonarmrohr TP16 TD126 TD160 TD147 In sehr gutem Zustand ohne Garantie und keine Rücknahme, da Privatverkauf, aus Nichtraucherhaushalt. Einziges Manko: Das dünne Montageplättchen ist selbst gefertigt, nicht original. Lieferumfang siehe Fotos.

Zum Verkauf kommt hier ein gebrauchtesThorens Headshell TP60 für Tonarm TP16 z.B auf Thorens TD160Es handelt sich nur um das Headshell, ohne alle Anbauteile. Technisch ist es einwandfrei. Es fehlt der Fingerhebel und weitere Teile!

Ich biete einen Thorens TD 160 MK I Belt Drive Plattenspieler aus den 1970er Jahren an, welcher technisch und optisch eigentlich keine Mängel hat bis auf geringe Gebrauchsspuren an der Zarge und dem Deckel, welche für das Alter aber normal sind. Der Dreher kommt mit einem neuen Riemen. Für 65,-€ Aufpreis gibt es das Ortofon VMS20 MKII dazu, ansonst wird der Plattenspieler mit Headshell ohne Tonabnehmer geliefert. International bidders are welcome, please askfor the exact shipping cost before bidding. Technische Daten (Quelle: https://www.hifi-wiki.de/index.php/Thorens_TD_160) AllgemeinHersteller: ThorensModell: TD 160Typ: PlattenspielerBaujahre: 1972 - 1976Hergestellt in: Deutschland bei EMT in LahrFarbe: schwarz, Holzfurnier; auch andere HolzartenLeistungsaufnahme:Abmessungen: 442 x 358 x 150 mm (BxHxT)Gewicht: ca. 8,5 kgNeupreis ca.: 490 DM AnschlüsseAusgänge: 1 Technische DatenAntrieb: RiemenMotor: 16-poliger Synchronmotor (AC)Drehzahl: 33, 45 U/minGleichlaufschwankungen:Rumpelgeräuschabstand: 50 dBPlattenteller: Zinkspritzguss, 300 mm, 3,2 kgBetriebsart: manuellPitch: neinTonarm: TP 16 Besondere AusstattungenMotor benötigt kein Netzteil. Regelung der Geschwindigkeit über die Netzfrequenz. Der Verkauf erfolgt von privat unter Ausschluß jeglicher Gewährleistung bzw. Garantie. Bitte bedenken Sie, daß es sich um ein 30 bis 40 Jahre altes Gerät handelt, welches nicht die dauerhafte Funktionsgarantie eines Neugeräts aufweist. Das Angebot ist daher an Personen gerichtet, die wissen, was Sie hier kaufen. Es besteht kein Rückgaberecht. Mit Abgabe ihres Gebotes erklären sie sich mit diesen Bedingungen ausdrücklich einverstanden. Bieten sie nicht, wenn sie nicht einverstanden sind! The sale is made privately to the exclusion of any warranty or guarantee. There is no right of return. Please keep in mind that the device is 30 to 40 years old and does not have the long-term functional guarantee of a new device. The offer is therefore aimed at people who know what you are buying here. By submitting their bid, they expressly agree to these terms. Do notbid if you disagree!

Ich biete einen Thorens TD 160B MK II Belt Drive Plattenspielerlaufwerk zur eigenen Auswahl eines Tonarms, welcher technisch und optisch keine Mängel hat bis auf normale Gebrauchsspuren an der Zarge, welche für das Alter aber normal sind. Der Plattenspieler wurde mit einem 10mm Tellerlager ausgestattet und hat einen Metallsubteller.Der Dreher kommt neuem Riemen und ohne Deckel. International bidders are welcome, please askfor the exact shipping cost before bidding. Technische Daten (Quelle: https://www.hifi-wiki.de/index.php/Thorens_TD_160_MK_II) AllgemeinHersteller: ThorensModell: TD 160B Mk IIBaujahre: 1976 - 1984Hergestellt in: SchweizFarbe: schwarz, silberLeistungsaufnahme:Abmessungen: 430 x 360 x 150 mm (BxHxT)Gewicht: ca. 7,9 kg Anschlüssekeine Technische DatenAntrieb: RiemenMotor: 16-poliger Synchronmotor (AC)Drehzahl: 33, 45 U/minGleichlaufschwankungen: 0,04 %Rumpelgeräuschabstand: 70 dBdoppelt gelagertes SubchassisPlattenteller: Zinkspritzguss, 300 mm, 3,2 kgBetriebsart: manuell (mechanische Endabschaltung Zubehör)Pitch: neinTonarm: TP 16 MK II, TP 16 Mk III, TP 21 Besondere AusstattungenMotor benötigt kein Netzteil. Regelung der Geschwindigkeit über die Netzfrequenz Der Verkauf erfolgt von privat unter Ausschluß jeglicher Gewährleistung bzw. Garantie. Bitte bedenken Sie, daß es sich um ein 30 bis 40 Jahre altes Gerät handelt, welches nicht die dauerhafte Funktionsgarantie eines Neugeräts aufweist. Das Angebot ist daher an Personen gerichtet, die wissen, was Sie hier kaufen. Es besteht kein Rückgaberecht. Mit Abgabe ihres Gebotes erklären sie sich mit diesen Bedingungen ausdrücklich einverstanden. Bieten sie nicht, wenn sie nicht einverstanden sind! The sale is made privately to the exclusion of any warranty or guarantee. There is no right of return. Please keep in mind that the device is 30 to 40 years old and does not have the long-term functional guarantee of a new device. The offer is therefore aimed at people who know what you are buying here. By submitting their bid, they expressly agree to these terms. Do notbid if you disagree!

Thorens Td 160 Turntable Very Clean Example All functions work very nicely. If looking from the front, the back rear left corner has a small notch in wood. Everything else very nice. All cords are labeled for preamp, tuner L and R, ground, phone, tape Etc. Very Nice Example. Will be professionally packaged with quality materials for safe transport and arrival.

Restored Thorens Turntable optional TD146 or TD160 MKII Cream White The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Individual production! Please note the processing time stated on eBay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in glossy black but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in shiny black but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored THORENS optionally TD146 or TD160 MKII in black-cream white (Both variants are visually identical) Our record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality cases are restored or newly manufactured using skilled craftsmanship. Electrical components are checked, moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. You can choose between TD146 or TD160 MKIITD146 Original tonearm:    TP 11 MKII, with exchangeable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm TD160 MKIIOriginal tonearm:    TP 16 MKII, with exchangeable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The housing consists of 25 mm MDF side panels and a 16 mm thick base made of the same material. It is very complex with several layers of high gloss varnish sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections. Cover plate: Cover plate made of 1mm aluminum with surface coating in cream white Cartridge Ortofon OM5E:The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback. Audio cable: Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. Turntable:The turntable is painted matt black. It gives your record player a lasting and subtle elegance. with transparent turntable support and single puck Height-adjustable device feet: Stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers. Resonances and feedback are thus effectively prevented. The drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood large (to be placed on the substructure):    180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base):           180 Normal 0 21 false false false DE X-NONE X-NONE See also this products: Restored Thorens Turntable wahlweise TD146 oder TD160 MKII Champagne Restored Thorens Turntable wahlweise TD146 oder TD160 MKII Teal Green Restored Thorens Turntable Either TD146/TD160 Mkii Champagne Restored Thorens TD160 MKII Turntable Black White Cream Sme Series III Restored Thorens TD160 MKII Turntable Schwarz-Burgundy Sme Series III Restored Thorens TD160 Mkii Turntable Orange And Ice Blue Metallic Restored Thorens TD160 Turntable Raspberry Metallic Restored Thorens TD160 Turntable IN White Piano Lacquer Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Farbe Schwarz Modell wahlweise TD146 oder TD160 MKII Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb Herstellergarantie 1 Jahr EAN Nicht zutreffend

Restored Thorens TD160 MKII turntable black-petrol & SME 3009 S III The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Individual production! Please note the processing time stated on eBay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in glossy black but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in shiny black but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored 160 MK II in black - petrol metallic with SME 3009 Series IIIOur record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality cases are restored or newly manufactured using skilled craftsmanship. Electrical components are checked, moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx.18cmHousing:The housing consists of 25 mm MDF side panels and a 16 mm thick base made of the same material. It is very complex with several layers of high gloss varnish sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections.Cover plate:Cover plate made of 1mm aluminum with surface coating in petrol metallicOrtofon Vinyl Master Alpha cartridge:The Ortofon Alpha is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that enables balanced and distortion-free playback.So you can start with a VM Alpha and then improve the quality by using the next available stylus insert. Audio cable:Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. Turntable:The turntable is painted matt black. It gives your record player a lasting and subtle elegance. with transparent turntable support and single puck. Height adjustable spikes:Surface black-chrome. The high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimal point (tip of the spike), absorbs the vibrations. Resonances and feedback are thus effectively prevented.Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Hood small (to be placed on the frame): 160Hood large (to be placed on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799following Parts are as Accessoriesör receiveältlich and not ingredient this auction:The following parts are available as accessories and not included in this auction:Our record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality cases are restored or newly manufactured using skilled craftsmanship. Electrical components are checked, moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25 mm MDF side panels and a 16 mm thick base made of the same material. It is very complex with several layers of high gloss varnish sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections. Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free cop See also this products: Restored Thorens TD160 B Mkii Sme 3009 Turntable Dark Ocean Blue Met Restored Thorens TD160 MKII Turntable Schwarz-Burgundy Sme Series III Restored Thorens TD160 MKII Turntable Black White Cream Sme Series III Restored Thorens TD160 MKII Turntable Turquoise Blue With Sme Series III Restored Thorens TD160 Turntable Electric Orange Ice Blue With Sme 3009 Restored Thorens TD160B Mkii Turntable IN Yellow Curry & Sme 3009 Restored Thorens TD160 Turntable Black Burgundy Red Metallic & Sme Restored Thorens TD 125 MKII Turntable Also Sme 3009 Possible Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD160 MKII Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb Herstellergarantie 1 Jahr EAN Nicht zutreffend

Restored Thorens Turntable Either TD146/TD160 Mkii ChampagneThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored THORENS either TD146 or TD160 MKII in black-champagne metallic and cream white (Both variants are visually identical) Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. You can choose between TD146 or TD160 MKIITD146 Original tonearm:    TP 11 MKII, with replaceable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm TD160 MKIIOriginal tonearm:    TP 16 MKII, with replaceable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Cover plate: Cover plate made of 1mm aluminum with surface painting cream white Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck. Height-adjustable device feet: Stainless steel. The contact surface with the base is reduced to a minimum by 3 rubber buffers. Resonances and feedback are thus effectively prevented. The drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). -------- The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base):           180 Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: ORTOFON 2M Red (elliptical):        90ORTOFON 2M Blue (elliptical, naked):        190ORTOFON 2M Bronze (Fineline): 390 ORTOFON 2M Black (Shibata):     590 ORTOFON 2M Black LVB 250 (Shibata):    899 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell wahlweise TD146 oder TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

Restored Thorens TD160 MKII Turntable Schwarz-Burgundy Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in glossy black but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in shiny black but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored 160 MK II in black - burgundy metallic with SME Series IIIOur record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting burgundy metallicOrtofon Vinyl Master Alpha pickup:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck.Height-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

RESTORED and MODIFIED by ART-AND-SOUND Restored 160 ice blue metallic paintworkDesigner piece - design product - designer productWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our record players are lovingly assembled, modified and assembled by hand.Each of them is unique and differs in model, color or veneer grain.The high-quality cases are restored or newly manufactured using skilled craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx.18cm The housing:The housing consists of 25 mm MDF side panels and a 16 mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections.Faceplate:Cover plate made of 1mm aluminium and ice blue metallic PaintingThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The OM 10 is the entry-level model in the series and is a great entry-level system for mid-priced turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality by using the next available stylus insert.The audio cable:Branded cable from Oehlbach. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.The turntable:In five complex and time-consuming steps, the turntable is polished to a high gloss.The high gloss polish gives your record player a unique look.With surface sealing through a special protective coating, against repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:To decouple the record player from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Tonehead pickup cableThe high-quality headshell cable with its 24 Kt. Gold-plated cable lugs provide the optimal connection between pickup and tonearm. New stainless steel record weight:With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system. following Parts are as Accessoriesör receiveältlich and not ingredient this auction:Hood small (to be placed on the frame): eBay-Article number 112401191474Hood large (to be placed on the substructure):    eBay-Article number 112411582098The following parts are available as accessories and not included in this auction:Hood small (to put on the housing):    eBay-article number is 112401191474Hood large (to put on the base):            eBay-article number is 112411582098Cartridge MM systems including installation: Branded cable from Oehlbach. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your sy

Restored Thorens Turntable wahlweise TD146 oder TD160 MKII ChampagneThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored THORENS either TD146 or TD160 MKII in black-champagne metallic (Both variants are visually identical) Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. You can choose between TD146 or TD160 MKIITD146 Original tonearm:    TP 11 MKII, with replaceable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm TD160 MKIIOriginal tonearm:    TP 16 MKII, with replaceable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Cover plate: Cover plate made of 1mm aluminum with surface painting champagne metallic Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck. Height-adjustable device feet: Stainless steel. The contact surface with the base is reduced to a minimum by 3 rubber buffers. Resonances and feedback are thus effectively prevented. The drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base):           180 Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: ORTOFON 2M Red (elliptical):         90ORTOFON 2M Blue (elliptical, naked):        190ORTOFON 2M Bronze (Fineline): 390 ORTOFON 2M Black (Shibata):     590 ORTOFON 2M Black LVB 250 (Shibata with boron needle carrier):    899 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell wahlweise TD146 oder TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

Restored Thorens Turntable wahlweise TD146 oder TD160 MKII Teal GreenThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored THORENS either TD146 or TD160 MKII in black-petrol metallic (Both variants are visually identical) Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. You can choose between TD146 or TD160 MKIITD146 Original tonearm:    TP 11 MKII, with replaceable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm TD160 MKIIOriginal tonearm:    TP 16 MKII, with replaceable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm Housing: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Cover plate: Cover plate made of 1mm aluminum with surface painting petrol metallic Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck. Height-adjustable device feet: Stainless steel. The contact surface with the base is reduced to a minimum by 3 rubber buffers. Resonances and feedback are thus effectively prevented. The drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). -------- The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base):           180 Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: ORTOFON 2M Red (elliptical):        90ORTOFON 2M Blue (elliptical, naked):        190ORTOFON 2M Bronze (Fineline): 390 ORTOFON 2M Black (Shibata):     590 ORTOFON 2M Black LVB 250 (Shibata):    899 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell wahlweise TD146 oder TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

Restored Thorens TD160 Turntable Ice Blue Metallic PaintworkThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.RESTORED and MODIFIED by ART-AND-SOUND Restored 160 ice blue metallic paintingDesigner piece - design product - designer productWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color or veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum and ice blue metallic PaintingThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Tonkopft pickup cableThe high-quality headshell cable with its 24 kt. Gold-plated cable lugs create the optimal connection between pickup and tonearm. New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): eBay-item number 112401191474Hood big (for placing on the substructure):    eBay-item number 112411582098The following parts are available as accessories and not included in this auction:Hood small (to put on the housing):    German eBay-article number is 112401191474Hood large (to put on the base):            German eBay-article number is 112411582098Cartridge MM systems including installation: Branded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Manual Turntable Racing Green Champagne Met. The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Individual production! Please note the processing time stated on eBay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 160 British racing green and champagne metallicHigh gloss finish, total weight approx. 15.5kgItem description:Limit switch:   NoInner plate:            metalDisc bearing:            10mmBasic dimensions:          Width: 52cm, depth: 43cm, total height approx. 20cmHousing:Cover plate:Cover plate made of 1mm aluminium, surface champagne metallicCartridge Ortofon OM5E:The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback.Audio RCA cable:Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.  Turntable:The matt black finish gives the record player a lasting and subtle elegance.Device feet:The device feet are made of stainless steel and are height adjustable.Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. following Parts are as Accessoriesör receiveältlich and not ingredient this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood large (to be placed on the substructure):    180Dust cover: Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron stylus): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 The housing consists of a 6 x 10 cm frame made of MDF and a 16 mm thick base made of the same material. It is very complex with several layers of high gloss varnish sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections.The housing consists of a 6 x 10 cm frame made of MDF and a 16 mm thick base made of the same material. It is very complex with several layers of high gloss varnish sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections. Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. I See also this products: Restaurierter Thorens TD160 Manual Turntable British Racing Green 33.1lbs Restaurierter Thorens TD160 Manual Turntable Racing Green And Black Restaurierter Thorens TD160 Manual Turntable Racing Green And Stainless Steel Restored Thorens TD160 Turntable Limited Edition Flight Green Metallic Restaurierter Thorens TD145 Turntable With Limiting Green And Stainless Steel Restored Thorens TD160 Turntable Raspberry Metallic Restored Thorens Turntable wahlweise TD146 oder TD160 MKII Teal Green Restaurierter Thorens TD145 Turntable With Auto Shut Off Green Champagne Herstellernummer nicht zutreffend Marke Restaurierter Thorens Modell TD 160 Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend

Restaurierter Thorens TD160 Manual Turntable Racing Green And Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 160 british racing green metallic and stainless steelHigh-gloss finish, total weight approx. 15.5kgItem description:Limit switch:   NoInner plate:            metalPlate bearing:            10mmBasic dimensions:          Width: 52cm, depth: 43cm, total height approx. 20 cmHousing:The housing consists of a 6 x 10cm frame made of MDF and a 16 mm thick base of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, brushed stainless steel surface with black letteringOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio RCA cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.  Turntable:The matt black finish gives the record player a lasting and subtle elegance.Device feet:The device feet are made of stainless steel and are height-adjustable.Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 The housing consists of a 6 x 10cm frame made of MDF and a 16 mm thick base of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Manual Turntable British Green Metallic 33.1lbsThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 160 british green metallicHigh-gloss finish, total weight approx. 15.5kgItem description:Limit switch:   NoInner plate:            metalPlate bearing:            10mmBasic dimensions:          Width: 52cm, depth: 43cm, total height approx. 20 cmHousing:The housing consists of a 6 x 10cm frame made of MDF and a 16 mm thick base of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, surface british green metallicOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio RCA cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.  Turntable:The matt black finish gives the record player a lasting and subtle elegance.Device feet:The device feet are made of stainless steel and are height-adjustable.Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 The housing consists of a 6 x 10cm frame made of MDF and a 16 mm thick base of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Normal 0 21 false false false DE X-NONE X-NONE Ich biete hier in unterschiedlichen Auktionen alte elektrische, elektromechanische & elektronische Bauteile aus Opa´s Werkstatt an. vom und für den Plattenspieler: Thorens TD147 Vintage PHONO Oldschool In dieser Auktion bieten Sie auf: Tonarmstütze Farbe: schwarz passend u.a. für: TD145 TD147 TD160 TD166 (ohne Gewähr) WYSIWIG = What you see ist what you get Der Zustand ist: Gebraucht aber sauber und in Ordnung, siehe bitte auf die hellen Bilder. Es wurde mit Sachverstand und vorsichtig ausgebaut und es wird ebenso verpackt. Versand: Versendet wird NUR mit HERMES und auch NUR innerhalb Deutschlands. I ship only within Germany and delivery only with Hermes. (Sorry for that.) Meine Verpackungen sind vorbildlich, lesen Sie hierzu gerne meine Bewertungen. PORTO: Wenn Sie mehrere Artikel gekauft haben geben Sie mir bitte die Zeit diese zusammenzufassen um so Doppel-Porto zu vermeiden, Danke. Sie zahlen bei mir nur die echten Hermes Online-Paketpreise und zwar OHNE Aufschlag. Allgemeines: Ich verwende meine eigenen Bilder und meine eigenen Texte. Sehen Sie sich bitte die Fotos genau an, denn diese sind Bestandteil meiner Beschreibung. Markennamen sind geschützt und werden hier nur erwähnt, um die Qualität des jeweiligen Produktes zu unterstreichen. Preisstellung: Alle Preise sind Endpreise. Eine Mehrwertsteuer darf ich auf Grund meiner Gewerbeform nicht ausweisen. Rechtsform: Kleingewerbe, das nach § 19 (1) USt.-Gesetz nicht berechtigt MwSt. (Umsatzsteuer) auf der Rechnung auszuweisen. Zahlungen: Bitte nutzen Sie eine der angebotenen Zahlungsmethoden die von ebay angezeigt werden. Ein anderer Weg steht leider nicht zur Verfügung. Speicherung Vertragstext: Der Vertragstext wird Seitens eBay nach Vertragsschluss für eine begrenzte Zeitdauer gespeichert. Wie lange diese Speicherung erfolgt richtet sich nach den eBay-AGB. Ich weise daraufhin, dass es Ihnen obliegt die über die Plattform eBay einsehbaren und von eBay gespeicherten Informationen auf einem eigenen von eBay unabhängigen Speichermedium zu archivieren. Durch die Druckfunktion Ihres Browsers haben Sie auch die Möglichkeit, den Vertragstext auszudrucken. Der Vertragstext wird von mir nicht gespeichert. Im Zweifelsfall gelten immer die gesetzlichen Bestimmungen! Man kann mit mir grundsätzlich über alles reden, aber falls es einmal gar nicht anders gehen sollte: Gerichtstandort wäre dann Berlin.

Thorens Td 160 Turntable Very Clean Example All functions work very nicely. If looking from the front, the back rear left corner has a small notch in wood. Everything else very nice. All cords are labeled for preamp, tuner L and R, ground, phone, tape Etc. Very Nice Example. Will be professionally packaged with quality materials for safe transport and arrival.

Restaurierter Thorens TD160 Manual Turntable Racing Green And BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 160 british racing green metallic and blackHigh-gloss finish, total weight approx. 15.5kgItem description:Limit switch:   NoInner plate:            metalPlate bearing:            10mmBasic dimensions:          Width: 52cm, depth: 43cm, total height approx. 20 cmHousing:The housing consists of a 6 x 10cm frame made of MDF and a 16 mm thick base of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, surface black anodizedOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio RCA cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.  Turntable:The matt black finish gives the record player a lasting and subtle elegance.Device feet:The device feet are made of stainless steel and are height-adjustable.Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 The housing consists of a 6 x 10cm frame made of MDF and a 16 mm thick base of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 MKII Turntable Turquoise Blue With Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND 160 MKII black - turquoise blue with SME Series III tonarmOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with turquoise blue surface paintOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:High-gloss black finishDevice feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2220g, diameter 54mm, height 34mm. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180Cartridge MM system including installation: Ortofon VinylMaster Red (naked elliptical cut):      220Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut): 470 Ortofon 2MRed (elliptical):                99Ortofon 2M Blue (elliptical, naked):  190Ortofon 2M Bronze (Fineline):         390 Ortofon 2M Black (Shibata):            590 Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899Cartridge MC System including installation:AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO TECHNICA AT-OC9XSL (Special Line Contact): 799The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weigh Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 MKII Turntable Black White Cream Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!The right switch is not available in this version; the lift is operated manually directly on the tonearm.The right switch is not available in this variant, the lift is operated manually directly on the tonearm.RESTORED by ART-AND-SOUND 160 MKII black - white cream with SME Series III tonarmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting white creamThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:High-gloss finish in black, turntable support in transparent acrylic glass, 7 single puck made of demagnetized stainless steelHeight-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2220g, diameter 54mm, height 34mm. Cartridge MM system including installation:   Cartridge MC System including installation: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland