Restored Thorens TD160 Turntable Limited Edition Caliente Red MetallicThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/240V or 110V/120V (for example USA and world wide) Restored 160 Caliente Red MetallicHigh gloss finishAlso possible with SME tonearmOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            metalPlate bearing:            10mmBasic dimensions:          Width: 54cm, depth: 45cm, height 15cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, caliente red metallic surfaceOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Audio RCA cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.  Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (we offer the appropriate pickups on request): SME 3009 improved: 690 SME 3009 S2 improved: 690 SME Series III: 690 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

This is a reprint of an Advertisement from 1975! The picture is of the actual item, Mint Condition! Very rare and hard to find! A piece of Audio History! I have THOUSANDS more Ads and Reviews on my Ebay Store. Email with ANY questions, THANKS! -Search for any brand you like on the left side in my Store Search bar. I have almost every popular Audio brand! -Each Page is 8.5 by 11 -Shipping is $3 in the USA and $6 ANYWHERE else, I ship WORLDWIDE! Each additional item is only $1 more to ship! -As always, your satisfaction is GUARANTEED at Electronics Archives! If you are unhappy with any purchase, email and I will get you a resolution or a refund! -Email me with any questions, I put 10-20 new Ads and Brochures on my site EVERY DAY! THANK YOU! Powered by eBay Turbo ListerThe free listing tool. List your items fast and easy and manage your active items.

This turntable is available for 220V-230V / 50/60Hz or 110V-120V / 50/60Hz (for example USA or worldwide) Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! Bei Selbstabholung 70€ Rabatt!Gerne restaurieren wir auch Ihren Thorens in dieser Optik. RESTAURIERT von ART-AND-SOUND Restaurierter THORENS TD 160 MKII in orange-ice blue metallicAuch mit SME Tonarm möglich Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt, modifiziert und montiert. Jeder von ihnen ist ein Unikat und unterscheidet sich in Modell, Farbe, Furnier-maserung.Die hochwertigen Gehäuse werden in qualifizierter Handwerksarbeit restauriert oder neu angefertigt.Elektrische Bauteile werden überpüft, beweglichen Teile geölt und Verschleißteile ausgetauscht.Einen abschließender Dauerlauftest runden die aufwendigen Arbeiten ab.Der Kunde erhält ein Gerät der Spitzenklasse. Artikelbeschreibung:Endabschaltung: NeinInnenteller: MetallLagerdorn: 7mm Grundmaße: Breite: 45cm, Tiefe: 36cm, Höhe ca.18cm Gehäuse: Das Gehäuse besteht aus 25mm-MDF-Seitenteilen und einem 16 mm starken Boden gleichen Materials. Es ist sehr aufwendig mit mehreren Lagen Hochglanzlack bei entsprechenden Zwischenschliffen versiegelt und poliert. An der Rückseite befindet sich das Anschlusspanel für alle benötigten Kabelverbindungen. Deckplatte:Deckplatte aus 1mm Aluminium mit Oberflächenlackierung in ice blue metallic Tonabnehmer Ortofon Vinyl Master Alpha:Mit der VM-Serie hat Ortofon seit langem die Referenz MM-Tonabnehmer geschaffen, die lange Produktionszeit und der charakteristische Nadelkorpus sind auf der ganzen Welt ein Begriff. Das VM Alpha ist der Einstieg in die Serie und ist ein Super Einstiegssystem für Plattenspieler der mittleren Preislage. Die VM Reihe von Ortofon ist untereinander kompatibel. Sie können also mit einem VM Alpha starten und dann mit dem passenden Nadeleinschub die Qualität verbessern, indem Sie den nächsthörern Nadeleischub verwenden.Audiokabel: Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Plattenteller: In fünf aufwendigen und zeitintensiven Arbeitsschritten, wird der Plattenteller auf Hochglanz poliert. Die Hochglanzpolitur verleiht Ihrem Plattenspieler ein einzigartiges Aussehen. Mit Oberflächenversiegelung durch eine spezielle Schutzlackierung, gegen wiederholtes Anlaufen und für einen langanhaltenden Glanz.Spikes aus verchromten Edelstahl: Damit der Plattenspieler von niederfrequenten Schwingungen entkoppelt wird, ist das Chassis mit höhenverstellbaren Spikes ausgestattet. Resonanzen und Rückkopplungen werden somit effektiv verhindert. Antriebsriemen:Der Antriebsriemen ist neu. Er wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt.Schallplattengewicht: Mit einem Gewicht von 310g sorgt es dafür, das die Schallplatte glatt auf dem Teller aufliegt und ruhig durchläuft. Es baut gerade soviel Druck auf, die Schwingungen der Platte zu dämpfen ohne die Lagerbuchse zu beanspruchen. Die Federung des Thorens-Subchassis wurde entsprechend neu eingestellt. Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion: Staubschutzhaube:Haube klein (zum Aufsetzen auf die Zarge): 160 Haube groß (zum Aufsetzen auf den Unterbau): 180 Automatischer Tonarmlift: audio-technica AT6006R: 129 Cartridge MM System including installation: Ortofon 2M Red Verso (elliptisch): 109 Ortofon 2M Blue Verso (elliptisch, nackt): 209 Ortofon 2M Bronze Verso (fineline): 390 Ortofon 2M Black Verso (Shibata): 590 AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (Line-Contact-Schliff): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptisch): 279 AUDIO-TECHNICA AT-OC9XEN (elliptisch, nackt): 369 AUDIO-TECHNICA AT-33EV (elliptisch): 499 AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599 AUDIO-TECHNICA AT-33SA (Shibata): 799SME Tonarm (andere Tonabnehmer): SME 3009 improved: 690 SME 3009 S2 improved: 690 SME Series III: 690

Restored Thorens TD160 Mkii Turntable Orange - Ice Blue MetallicThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. This turntable is available for 220V-230V / 50/60Hz or 110V-120V / 50/60Hz (for example USA or worldwide)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!We would also be happy to restore your Thorens to this look.RESTORED by ART-AND-SOUND Restored 160 MKII in orange-ice blue metallicAlso possible with SME tonearmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface paint in ice blue metallicOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without the bearing bushing to claim. The suspension of the Thorens sub-chassis was readjusted accordingly.The following Parts are as Accessoriesör erhäliltic and not component this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180Automatic tone arm lift:audio-technica AT6006R: 129Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 109 Ortofon 2M Blue Verso (elliptical, naked): 209 Ortofon 2M Bronze Verso (fineline): 390Ortofon 2M Black Verso (Shibata): 590AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (line contact cut): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearm (other pickups): SME 3009 improved: 690 SME 3009 S2 improved: 690 SME Series III: 690 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Orange Modell TD 160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 B Mkii Sme 3009 Turntable Dark Ocean Blue MetThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 160 B MKII with SME 3009 II in dark ocean blue metallicOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting dark ocean blue metallicThe Ortofon VinylMaster Alpha cartridge:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799 The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 160 B MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay !Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay !Cette platine vinyle est disponible en 220V/ 50Hz ou 110V/60Hz (Par exemple ÉTATS-UNIS)! RESTAURÉ par ART-AND-SON 160B MKII restauré en jaune curryavec PME 3009AVEC UN POIDS DE COMBAT DE PLUS DE 10 KG !!!Nos platines sont assemblées, modifiées et assemblées avec amour à la main.Chacun deux est unique et diffère par son modèle, sa couleur et son grain de placage.Les boîtiers de haute qualité sont restaurés ou nouvellement fabriqués selon un savoir-faire qualifié.Les composants électriques sont vérifiés, Pièces mobiles huilées et pièces dusure remplacées.Un dernier test dendurance complète le travail complexe.Le client reçoit un appareil haut de gamme.Description de larticle :Fin de course :     NonPlaque intérieure : métalMandrin de roulement : 7mm Dimensions de base :            Largeur : 45 cm, profondeur : 36 cm, hauteur environ 18 cm Le logement :Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Cest très complexe avec plusieurs couches de vernis très brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière.Façade :état dorigine, parfaitLa cellule Ortofon OM 5E :Avec la série OM, Ortofon crée depuis longtemps la cellule MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. LOM 5E est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme.La série OM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec un OM 5E puis améliorer la qualité avec linsert daiguille approprié en utilisant linsert daiguille suivant.Le câble audio :Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace. Le plateau tournant :Le plateau tournant est réalisé en cinq étapes complexes et chronophages poli pour une brillance élevée.Le vernis brillant donne à votre tourne-disque un look unique.Avec scellement de surface à laide dun revêtement protecteur spécial pour éviter le ternissement répété et pour une brillance durable.Pointes en acier inoxydable chromé:Pour que le tourne-disque soit découplé des vibrations basses fréquences, Le châssis est équipé de pointes réglables en hauteur. Les résonances et les retours sont ainsi efficacement évités. La courroie dentraînement :La courroie dentraînement est neuve. Il est fabriqué selon les spécifications originales de Thorens (même matériau et mêmes dimensions).. ---------Ce qui suit les pièces sont comme Accessoiresör euhunliltique et pas composant ce enchères:Le suivant les pièces sont disponible comme accessoires et pas inclus dans ce enchères: Cartouche MM avec installation:Ortofon Vinyl Master Argent (Fritz Gyger) : 490 €Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Cest très complexe avec plusieurs couches de vernis très brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière. Avec la série OM, Ortofon crée depuis longtemps la cellule MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. LOM 5E est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme. Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Cest très complexe avec plusieurs couches de vernis très brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière. Avec la série OM, Ortofon crée depuis longtemps la cellule MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. LOM 5E est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme. Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité

Restored Thorens TD160 Mkii Turntable Orange - Ice Blue MetallicThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. This turntable is available for 220V-230V / 50/60Hz or 110V-120V / 50/60Hz (for example USA or worldwide)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!We would also be happy to restore your Thorens to this look.RESTORED by ART-AND-SOUND Restored 160 MKII in orange-ice blue metallicAlso possible with SME tonearmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface paint in ice blue metallicOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without the bearing bushing to claim. The suspension of the Thorens sub-chassis was readjusted accordingly.The following Parts are as Accessoriesör erhäliltic and not component this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180Automatic tone arm lift:audio-technica AT6006R: 129Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 109 Ortofon 2M Blue Verso (elliptical, naked): 209 Ortofon 2M Bronze Verso (fineline): 390Ortofon 2M Black Verso (Shibata): 590AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (line contact cut): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearm (other pickups): SME 3009 improved: 690 SME 3009 S2 improved: 690 SME Series III: 690 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Orange Modell TD 160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restaurierter Thorens TD160 Manual Turntable Racing Green And Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 160 british racing green metallic and stainless steelHigh-gloss finish, total weight approx. 15.5kgItem description:Limit switch:   NoInner plate:            metalPlate bearing:            10mmBasic dimensions:          Width: 52cm, depth: 43cm, total height approx. 20 cmHousing:The housing consists of a 6 x 10cm frame made of MDF and a 16 mm thick base of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, brushed stainless steel surface with black letteringOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio RCA cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.  Turntable:The matt black finish gives the record player a lasting and subtle elegance.Device feet:The device feet are made of stainless steel and are height-adjustable.Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 The housing consists of a 6 x 10cm frame made of MDF and a 16 mm thick base of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Manual Turntable British Green Metallic 33.1lbsThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 160 british green metallicHigh-gloss finish, total weight approx. 15.5kgItem description:Limit switch:   NoInner plate:            metalPlate bearing:            10mmBasic dimensions:          Width: 52cm, depth: 43cm, total height approx. 20 cmHousing:The housing consists of a 6 x 10cm frame made of MDF and a 16 mm thick base of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, surface british green metallicOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio RCA cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.  Turntable:The matt black finish gives the record player a lasting and subtle elegance.Device feet:The device feet are made of stainless steel and are height-adjustable.Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 The housing consists of a 6 x 10cm frame made of MDF and a 16 mm thick base of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Ice Blue Metallic PaintworkThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.RESTORED and MODIFIED by ART-AND-SOUND Restored 160 ice blue metallic paintingDesigner piece - design product - designer productWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color or veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum and ice blue metallic PaintingThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Tonkopft pickup cableThe high-quality headshell cable with its 24 kt. Gold-plated cable lugs create the optimal connection between pickup and tonearm. New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): eBay-item number 112401191474Hood big (for placing on the substructure):    eBay-item number 112411582098The following parts are available as accessories and not included in this auction:Hood small (to put on the housing):    German eBay-article number is 112401191474Hood large (to put on the base):            German eBay-article number is 112411582098Cartridge MM systems including installation: Branded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 MKII Turntable Turquoise Blue With Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND 160 MKII black - turquoise blue with SME Series III tonarmOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with turquoise blue surface paintOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:High-gloss black finishDevice feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2220g, diameter 54mm, height 34mm. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180Cartridge MM system including installation: Ortofon VinylMaster Red (naked elliptical cut):      220Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut): 470 Ortofon 2MRed (elliptical):                99Ortofon 2M Blue (elliptical, naked):  190Ortofon 2M Bronze (Fineline):         390 Ortofon 2M Black (Shibata):            590 Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899Cartridge MC System including installation:AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO TECHNICA AT-OC9XSL (Special Line Contact): 799The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weigh Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

This is a reprint of an Advertisement from 1975! The picture is of the actual item, Mint Condition! Very rare and hard to find! A piece of Audio History! I have THOUSANDS more Ads and Reviews on my Ebay Store. Email with ANY questions, THANKS! -Search for any brand you like on the left side in my Store Search bar. I have almost every popular Audio brand! -Each Page is 8.5 by 11 -Shipping is $3 in the USA and $6 ANYWHERE else, I ship WORLDWIDE! Each additional item is only $1 more to ship! -As always, your satisfaction is GUARANTEED at Electronics Archives! If you are unhappy with any purchase, email and I will get you a resolution or a refund! -Email me with any questions, I put 10-20 new Ads and Brochures on my site EVERY DAY! THANK YOU! Powered by eBay Turbo ListerThe free listing tool. List your items fast and easy and manage your active items.

Restored Thorens TD160 Turntable Black Burgundy Red Metallic & SmeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!RESTORED by ART-AND-SOUND Restored THORENS TD160 with SME 3009 black and burgundy red metallicOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting burgundy red metallicOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:A matt black finish on the turntable gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound perform Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160B Mkii Turntable IN Yellow Curry & Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! RESTORED by ART-AND-SOUND Restored 160B MKII in curry yellowwith SME 3009WITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:original, mint conditionThe Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).. --------The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM including installation:Ortofon Vinyl Master Silver (Fritz Gyger): €490The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact secur Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160B MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 MKII Turntable Black White Cream Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!The right switch is not available in this version; the lift is operated manually directly on the tonearm.The right switch is not available in this variant, the lift is operated manually directly on the tonearm.RESTORED by ART-AND-SOUND 160 MKII black - white cream with SME Series III tonarmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting white creamThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:High-gloss finish in black, turntable support in transparent acrylic glass, 7 single puck made of demagnetized stainless steelHeight-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2220g, diameter 54mm, height 34mm. Cartridge MM system including installation:   Cartridge MC System including installation: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Thorens TD160 original pulley and motor, OEM, works This was removed from a European 220V Thorens TD 160 (see photos). This motor and pulley is in working order, we removed it to install a US motor. V 220/110~W 2.5/1.2Hz 50

Thorens TD160 Turntable Grado Cartridge Thorens TD160 comes in very good used condition with surface scratches and small marks. In full working order. Please check all of the photographs as these helps to form part of the description.If you require any help with your order, please don’t hesitate to contact us by eBay contact form.

Restaurierter Thorens TD160 Manual Turntable Racing Green Champager MetThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 160 british racing green and champagne metallicHigh-gloss finish, total weight approx. 15.5kgItem description:Limit switch:   NoInner plate:            metalPlate bearing:            10mmBasic dimensions:          Width: 52cm, depth: 43cm, total height approx. 20 cmHousing:The housing consists of a 6 x 10cm frame made of MDF and a 16 mm thick base of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, surface champagne metallicOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio RCA cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.  Turntable:The matt black finish gives the record player a lasting and subtle elegance.Device feet:The device feet are made of stainless steel and are height-adjustable.Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 The housing consists of a 6 x 10cm frame made of MDF and a 16 mm thick base of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Cette platine vinyle est disponible en 220V/50Hz ou 110V/50/60Hz en intérieur (par exemple USA ou Japon)Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay !Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay !RESTAURÉ par ART-AND-SON 160 MKII noir - bleu turquoise avec tonar SME Series IIImNos tourne-disques sont assemblés et assemblés avec amour à la main.Chacun deux est unique et diffère par son modèle, sa couleur et son grain de placage.Les boîtiers de haute qualité sont restaurés ou nouvellement fabriqués selon un savoir-faire qualifié.Les composants électriques sont vérifiés, Pièces mobiles huilées et pièces dusure remplacées.Un dernier test dendurance complète le travail complexe.Description de larticle :Fin de course :     NonPlaque intérieure : métalMandrin de roulement : 7mm Dimensions de base :            Largeur : 45 cm, profondeur : 36 cm, hauteur environ 18 cmLogement:Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Cest très complexe avec plusieurs couches de vernis très brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière.Façade :Plaque de recouvrement en aluminium de 1 mm avec peinture de surface bleu turquoiseMicro Ortofon Vinyl Master Alpha :Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. La VM Alpha est lentrée dans la série des platines vinyles de milieu de gamme.La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha puis améliorer la qualité en utilisant la fente daiguille suivante.Câble audio:Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace. Plaque tournante:Finition noire brillantePieds de lappareil:Réglable en hauteur, en acier inoxydable. La zone de contact avec le socle est réduite au minimum par 3 tampons en caoutchouc.Les résonances et les retours sont ainsi efficacement évités. Poids total 2220g, diamètre 54mm, hauteur 34mm. La courroie dentraînement :La courroie dentraînement est neuve. Il est fabriqué selon les spécifications originales de Thorens (même matériau et mêmes dimensions).Poids record :Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence. En lutilisant, vous augmentez les performances sonores de votre système.Ce qui suit les pièces sont comme Accessoiresör euhunliltique et pas composant ce enchères:Le suivant les pièces sont disponible comme accessoires et pas inclus dans ce enchères:Petite capuche (à poser sur le cadre) : 160Grande capuche (à poser sur la sous-structure) :    180Système à cartouche MM comprenant linstallation : Ortofon VinylMaster Rouge (coupe elliptique nue) :      220Ortofon VinylMaster Argent (nu Fritz Gyger coupe 70) : 470 Ortofon 2MRed (elliptique) :                99Ortofon 2M Bleu (elliptique, nu) :  190Ortofon 2M Bronze (Fineline) :         390 Ortofon 2M Noir (Shibata) :            590 Ortofon 2M Black LVB 250 (Shibata avec porte-aiguille en bore) : 899Système MC à cartouche comprenant linstallation :TECHNIQUE AUDIO AT-OC9XML (Microlinéaire) : 599TECHNIQUE AUDIO AT-OC9XSH (Shibata) : 699TECHNIQUE AUDIO AT-OC9XSL (Contact de ligne spéciale) : 799Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace. Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence.Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace. Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence.

Restored Thorens TD160 Turntable Electric Orange Ice Blue With Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Reconditioned THORENS TD160 orange-ice blue metallic with SME 3009 tonearmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting ice blue metallicOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical, naked): 199Ortofon VinylMaster Silver (Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Limited Edition Gold MetallicThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/240V or 110V/120V (for example USA and world wide) Restored 160 Gold MetallicHigh gloss finishAlso possible with SME tonearmOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            metalPlate bearing:            10mmBasic dimensions:          Width: 54cm, depth: 45cm, height 15cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, surface gold metallicOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Audio RCA cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.  Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (we offer the appropriate pickups on request): SME 3009 improved: 690 SME 3009 S2 improved: 690 SME Series III: 690With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Raspberry MetallicThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! RESTORED by ART-AND-SOUND Restored 160 in raspberry metallicDesigner piece - design product - designer productWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Your record player is lovingly put together and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface paint in raspberry metallicThe audio cable:Branded cable! Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --------The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM including installation: Ortofon 2M Blue (elliptical, naked): €219 Ortofon 2M Bronze (fine line): €360Ortofon Vinyl Master Silver (Fritz Gyger): €490Cartridge MC including installation:Quinted Bronze (fineline diamond cut): €640 The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable! Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weigh Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Limited Edition Caliente Red MetallicThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/240V or 110V/120V (for example USA and world wide) Restored 160 Caliente Red MetallicHigh gloss finishAlso possible with SME tonearmOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            metalPlate bearing:            10mmBasic dimensions:          Width: 54cm, depth: 45cm, height 15cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, caliente red metallic surfaceOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Audio RCA cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.  Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (we offer the appropriate pickups on request): SME 3009 improved: 690 SME 3009 S2 improved: 690 SME Series III: 690 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland