Restored Thorens TD160 MKII Turntable Black Petrol & Sme 3009 S IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in glossy black but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in shiny black but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored 160 MK II in black - petrol metallic with SME 3009 Series IIIOur record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting petrol metallicOrtofon Vinyl Master Alpha pickup:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.So you can start with a VM Alpha and then improve the quality by using the next needle slot. Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck. Height-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

Restored Thorens Turntable wahlweise TD146 oder TD160 MKII Cream WhiteThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in glossy black but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in shiny black but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored THORENS either TD146 or TD160 MKII in black-cream white (Both variants are visually identical) Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. You can choose between TD146 or TD160 MKIITD146 Original tonearm:    TP 11 MKII, with replaceable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm TD160 MKIIOriginal tonearm:    TP 16 MKII, with replaceable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Cover plate: Cover plate made of 1mm aluminum with surface painting cream white Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck Height-adjustable device feet: Stainless steel. The contact surface with the base is reduced to a minimum by 3 rubber buffers. Resonances and feedback are thus effectively prevented. The drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base):           180 Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: ORTOFON 2M Red (elliptical):       90ORTOFON 2M Blue (elliptical, naked):        190ORTOFON 2M Bronze (Fineline): 390 ORTOFON 2M Black (Shibata):     590 ORTOFON 2M Black LVB 250 (Shibata with boron needle carrier):    899 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499 AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell wahlweise TD146 oder TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

Restored Thorens Turntable wahlweise TD146 oder TD160 MKII Teal GreenThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored THORENS either TD146 or TD160 MKII in black-petrol metallic (Both variants are visually identical) Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. You can choose between TD146 or TD160 MKIITD146 Original tonearm:    TP 11 MKII, with replaceable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm TD160 MKIIOriginal tonearm:    TP 16 MKII, with replaceable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm Housing: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Cover plate: Cover plate made of 1mm aluminum with surface painting petrol metallic Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck. Height-adjustable device feet: Stainless steel. The contact surface with the base is reduced to a minimum by 3 rubber buffers. Resonances and feedback are thus effectively prevented. The drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). -------- The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base):           180 Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: ORTOFON 2M Red (elliptical):        90ORTOFON 2M Blue (elliptical, naked):        190ORTOFON 2M Bronze (Fineline): 390 ORTOFON 2M Black (Shibata):     590 ORTOFON 2M Black LVB 250 (Shibata):    899 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell wahlweise TD146 oder TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

Restored Thorens Turntable Either TD146/TD160 Mkii ChampagneThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored THORENS either TD146 or TD160 MKII in black-champagne metallic and cream white (Both variants are visually identical) Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. You can choose between TD146 or TD160 MKIITD146 Original tonearm:    TP 11 MKII, with replaceable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm TD160 MKIIOriginal tonearm:    TP 16 MKII, with replaceable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Cover plate: Cover plate made of 1mm aluminum with surface painting cream white Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck. Height-adjustable device feet: Stainless steel. The contact surface with the base is reduced to a minimum by 3 rubber buffers. Resonances and feedback are thus effectively prevented. The drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). -------- The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base):           180 Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: ORTOFON 2M Red (elliptical):        90ORTOFON 2M Blue (elliptical, naked):        190ORTOFON 2M Bronze (Fineline): 390 ORTOFON 2M Black (Shibata):     590 ORTOFON 2M Black LVB 250 (Shibata):    899 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell wahlweise TD146 oder TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

Restored Thorens TD160 MKII Turntable Schwarz-Burgundy Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in glossy black but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in shiny black but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored 160 MK II in black - burgundy metallic with SME Series IIIOur record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting burgundy metallicOrtofon Vinyl Master Alpha pickup:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck.Height-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

Restored Thorens Turntable wahlweise TD146 oder TD160 MKII ChampagneThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored THORENS either TD146 or TD160 MKII in black-champagne metallic (Both variants are visually identical) Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. You can choose between TD146 or TD160 MKIITD146 Original tonearm:    TP 11 MKII, with replaceable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm TD160 MKIIOriginal tonearm:    TP 16 MKII, with replaceable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Cover plate: Cover plate made of 1mm aluminum with surface painting champagne metallic Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck. Height-adjustable device feet: Stainless steel. The contact surface with the base is reduced to a minimum by 3 rubber buffers. Resonances and feedback are thus effectively prevented. The drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base):           180 Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: ORTOFON 2M Red (elliptical):         90ORTOFON 2M Blue (elliptical, naked):        190ORTOFON 2M Bronze (Fineline): 390 ORTOFON 2M Black (Shibata):     590 ORTOFON 2M Black LVB 250 (Shibata with boron needle carrier):    899 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell wahlweise TD146 oder TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

Restored Thorens TD160 Manual Turntable British Green Metallic 33.1lbsThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 160 british green metallicHigh-gloss finish, total weight approx. 15.5kgItem description:Limit switch:   NoInner plate:            metalPlate bearing:            10mmBasic dimensions:          Width: 52cm, depth: 43cm, total height approx. 20 cmHousing:The housing consists of a 6 x 10cm frame made of MDF and a 16 mm thick base of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, surface british green metallicOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio RCA cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.  Turntable:The matt black finish gives the record player a lasting and subtle elegance.Device feet:The device feet are made of stainless steel and are height-adjustable.Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 The housing consists of a 6 x 10cm frame made of MDF and a 16 mm thick base of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Limited Edition Flight Green MetallicThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany RESTORED by ART-AND-SOUND Restored 160 in flight green metallicOur record players are lovingly put together and assembled by hand. Each of them differs in model, color or veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with metallic paint in flight green metallicOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799Branded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 MKII Turntable Turquoise Blue With Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND 160 MKII black - turquoise blue with SME Series III tonarmOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with turquoise blue surface paintOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:High-gloss black finishDevice feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2220g, diameter 54mm, height 34mm. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180Cartridge MM system including installation: Ortofon VinylMaster Red (naked elliptical cut):      220Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut): 470 Ortofon 2MRed (elliptical):                99Ortofon 2M Blue (elliptical, naked):  190Ortofon 2M Bronze (Fineline):         390 Ortofon 2M Black (Shibata):            590 Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899Cartridge MC System including installation:AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO TECHNICA AT-OC9XSL (Special Line Contact): 799The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weigh Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160B Mkii Turntable IN Yellow Curry & Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! RESTORED by ART-AND-SOUND Restored 160B MKII in curry yellowwith SME 3009WITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:original, mint conditionThe Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).. --------The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM including installation:Ortofon Vinyl Master Silver (Fritz Gyger): €490The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact secur Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160B MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Black Burgundy Red Metallic & SmeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!RESTORED by ART-AND-SOUND Restored THORENS TD160 with SME 3009 black and burgundy red metallicOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting burgundy red metallicOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:A matt black finish on the turntable gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound perform Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 MKII Turntable Black White Cream Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!The right switch is not available in this version; the lift is operated manually directly on the tonearm.The right switch is not available in this variant, the lift is operated manually directly on the tonearm.RESTORED by ART-AND-SOUND 160 MKII black - white cream with SME Series III tonarmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting white creamThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:High-gloss finish in black, turntable support in transparent acrylic glass, 7 single puck made of demagnetized stainless steelHeight-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2220g, diameter 54mm, height 34mm. Cartridge MM system including installation:   Cartridge MC System including installation: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Electric Orange Ice Blue With Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Reconditioned THORENS TD160 orange-ice blue metallic with SME 3009 tonearmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting ice blue metallicOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical, naked): 199Ortofon VinylMaster Silver (Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Raspberry MetallicThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! RESTORED by ART-AND-SOUND Restored 160 in raspberry metallicDesigner piece - design product - designer productWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Your record player is lovingly put together and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface paint in raspberry metallicThe audio cable:Branded cable! Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --------The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM including installation: Ortofon 2M Blue (elliptical, naked): €219 Ortofon 2M Bronze (fine line): €360Ortofon Vinyl Master Silver (Fritz Gyger): €490Cartridge MC including installation:Quinted Bronze (fineline diamond cut): €640 The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable! Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weigh Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Limited Edition Surfblue MetallicThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/240V or 110V/120V (for example USA and world wide) Restored 160 Surfblue MetallicHigh gloss finishAlso possible with SME tonearmOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            metalPlate bearing:            10mmBasic dimensions:          Width: 54cm, depth: 45cm, height 15cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, surface surfblue metallicOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Audio RCA cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.  Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (we offer the appropriate pickups on request): SME 3009 improved: 690 SME 3009 S2 improved: 690 SME Series III: 690 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable IN White Piano LacquerThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! RESTORED by ART-AND-SOUND Restored 160 in white high gloss finishWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalBearing mandrel: 10mm Audio cable: permanently installed on the turntableBasic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. Faceplate:Cover plate made of 1mm demagnetized stainless steel (brushed) with labelingThe Ortofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:Painted in housing colorSpikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). --------The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM including installation: Ortofon 2M Blue (elliptical, naked): €219 Ortofon 2M Bronze (fine line): €360Ortofon Vinyl Master Silver (Fritz Gyger): €490Cartridge MC including installation:Quinted Bronze (fineline diamond cut): €640The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland