USED CONDITION. TESTED & WORKING. EVIDENCE OF USE / WEAR ON CORNERS / EDGES. CUT FOR SME ARM.

Thorens TD150 MK2 turntable armboard for std tonearm . Rare wooden version as opposed to the ubiquitous plastic. Excellent part in this condition.

Thorens TD150 MK1 turntable Mat and 45 rpm adaptor. Excellent Rare part in this condition.

Thorens TD150 MK2 tonearm weight. The small one.. In Condition as shown

THORENS TD150 Mk2 II VINYL TURNTABLE with audio technica cart Tone arm is a little loose but works perfectly

Replacement Thorens turtbvale part in good used condition.

Thorens TD150 MK2, 10mm thick Gloss Black Acrylic Armboard for SME Arm. Never fitted but sold as used The armboard is fitted with M3 stainless steel inserts so the threads will not strip. Comes with M3 fixings for fixing the arm to the armboard, and fixings to fix the armboard to sub chassis

Thorens TD150 MK2 Turntable SME Armboard. Working ok, tonearm removed. Not in perfect condition but certainly worthy enough to make a project out of. Spins true on both speeds. Armboard cut for SME arm. Lid isnt in the best condition but functional. Please see the pictures for further details. TERMS & CONDITIONSIMPORTANT - PLEASE READ BEFORE PURCHASING 1. Returns 1.1 All items are sold with either a 14 or 30 day return policy as stated in the listing. Please contact us as soon as possible in the unlikely event that your item arrives not as described and we will be sure to resolve the issue. Abuse of the return policy is in breach of eBays T&Cs. Products may be invisibly security marked. All unscrupulous buyers will be reported and an action fraud case will be opened. 1.2 If goods are returned as surplus to your requirement and are not faulty on receipt, a restocking charge of 20% will apply. 2. Power Cables 2.1 In order to reduce electronic waste, unless stated, units that require standard IEC kettle or figure of eight power cables will not be included unless requested. If you require one, please let us know immediately after purchasing and we will include one free of charge. 3. International / Non Mainland UK Buyers 3.1 Most of our items are available to purchase via eBays global shipping program. If postage costs are not displayed to you, please contact us before pressing buy it now and we will try to find a solution. 4. General/Other 4.1 All of our shipments are carefully packaged to ensure safe carriage. All fragile packages are clearly marked as fragile and we do our utmost to ensure that they arrive to you intact. Recycled packaging materials will be made use of where appropriate. Thank you for looking, happy eBaying!

Thorens TD150 MK ll AB Turntable. Good working turntable. Needs a new needle, a dust cover and 45 adapter

THORENS TD150 Mk2 ii VINYL TURNTABLE Hifi Record Player Deck - TESTED -. From a house clearance and in literally as found,untouched and uncleaned condition.Tested working,but it’s missing it’s counter weight and the arm clip.No dust cover.

Mk 1 Thorens TD150, 1966-69, made under licence in Germany with NAD 9200 (actually a re-badged ADC) cartridge. Remarkably good cosmetic order for its age and working very nicely. The motor is turned on by the little switch at the back - so there must have been a problem with the speed selector/on/off control at some time in the past. No lid I am sorry to say - but they are available to buy. Audition just south of Bristol. Thanks for looking.

THORENS TD150 Mk2. Two extended armboards - Rega & SME pattern no arm. Good condition, I have had this since university, and used it with Hadcock, Linn, Rega and SME arms, hence the extended armboard size, below which is a brace spot welded to the original subchassis. Not the prettiest modification, but it does the job of reinforcing the subchassis. There is some damping applied - not much needed as the fabricated subchassis is not as resonant as the one piece 160 series pressing. The subchassis and top plate were once painted metallic grey, and some of the paint has come off. The trim plate is a piece of recycled black brushed aluminium effect held on by double sided tape (as was the original metal trim). This can easily be taken off. Linn springs, no mysterious creaking of the suspension. Plinth is MDF lacquered walnut veneer, with plywood base. Not the best as it is an early sample of my work. There are some small scratches and dents from use over the many years. Base is plywood. The lid is from a Rega, has some marks, but is optically clear. It may not be tall enough for SME arms, depending on your cartridge. Everything works as it does with Thorens, ie occasionally 45rpm selection is not as smooth as it could be. Lightly used belt fitted. Bearing cleaned and new oil will be provided. Suspension is set up for a Rega, so just fit your own single hole or three point fix Rega arm and off you go. Depending on your cartridge, Rega arm may need a spacer to raise height for correct VTA. Got to go, I need to continue clearout.Return accepted at buyers cost, for good reasons. I have described and photographed the deck as thoroughly as possible, small scuffs, marks etc. should be expected for a used item. You could do a lot worse. UK Tracked 48 postage GBP8.00 Please be aware: overseas buyers will probably pay duty and local VAT.Europe Tracked postage estimated GBP 27.00.Rest of the world PLEASE ENQUIRE!

Thorens TD150 MK2 turntable armboard for std tonearm . Rare wooden version as opposed to the ubiquitous plastic. Excellent part in this condition.

Thorens TD150 MK1 turntable armboard for std tonearm. The desirable EMT wooden Swiss Licence board. Rare part in presentable condition.

Thorens TD150 MK1 turntable Mat and 45 rpm adaptor. Excellent Rare part in this condition.

Thorens TD150 MK2 turntable armboard for std tonearm . Nice clean logo. Excellent part in this condition.

Thorens TD150 MK2 electronics and microswitch. Wires snipped at choc block as guide. If your motor is going backwards or rough it maybe this is the answer.

Thorens TD150 MK1 & 2 wiring loom, decent length ready to solder to turntable tag board. Original West German 5 Pin Din.

Thorens TD150 MK1 & 2 wiring loom, decent length ready to solder to turntable tag board.

Thorens TD150 MK1 turntable complete spring set to include rubbers foam washers and STRAIGHT stud set. Youll get a proper set up and bounce with these springs. Can also be used on MK2 Excellent Rare part in this condition.

Thorens TD150 MK1 & 2 aluminium strip lid stand. Excellent and rare part usually missing. This aluminium strip allows your lid to remain open. Rare part in this condition.

1970 Thorens TD150mk1 turntable chassis bearing inner and outer platters. Condition is Used. Bearing and bush perfect, still takes time for inner platter to drop indicate no wear. Taken from a superb late TD150 MK1. Good condition . Part in great condition.

Thorens TD150 MK2 turntable complete spring set to include rubbers foam washers and STRAIGHT stud set. Youll get a proper set up and bounce with these springs. Can also be used on MK1 Excellent Rare part in this condition.

Bonjour, Nous vendons cette platine vinyle Thorens. D’aspect esthétique bon, présentant des traces dutilisation, elle salimente, son moteur tourne, son bouton de vitesse est fonctionnel, cet appareil présente donc une très bonne base de restauration et/ou source de pièces. Appareil vendu pour pièces et/ou réparation, si vous souhaitez plus d’informations n’hésitez pas à nous contacter. Boutique spécialisée dans la vente d’appareils HiFi Vintage depuis 2017, chacun de nos articles est vendu tel que décrit et photographié. Envoi protégé et suivi via colissimo sous 48h après paiement de votre part ou possibilité de retrait en magasin : Vintage Référence 56 rue de Suède Local N°10 37100 Tours Tél : 06.75.76.14.20 Nous restons à votre disposition pour toute information complémentaire. Cordialement. VR