????Including & Condition Details: As shown in photos. ????Shipping: FedEx THORENS TD520 Record Player & SME Shell, Sub Weight, New Rubber Belt ..etc includedEquipped with TD520 ESOS (Electro Shut-off System) mechanism, the black finish floating cab is equipped with a genuine SME 3012-R long arm, and the lifter shuts off after playing. It will automatically go up and the turntable will stop rotating. It has a sharp design that is different from the rosewood finish, and the mechanism is outstanding. This is the most reliable and wonderful player when you want to enjoy the unique sound of analog. ?ConditionEach part has been polished/cleaned.Depending on the level of scratches, the dust cover is polished with a special abrasive and the finish is polished to enhance transparency. Polished the arm, platter, and metal parts until they were as clean as possible to remove dirt and rust. Dust cover/button part/platter/rubber mat- There is no major damage to the cover and it is transparent and clean.-The operation panel is also glossy, and the platter is also glossy with some dullness.-The rubber mat is also soft and shows no signs of deterioration or warping. Cabinet- Overall is shiny and in good condition with no major damage found.?All three hinges remain open without any kinks. Tonearm- There are no noticeable scratches and it is shiny and beautiful. It is in absolutely beautiful condition.Considering its age, we consider it to be in very good condition. ?We perform aging for half a day to one day to confirm the operation. For this listing, we have carried out a comprehensive maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence. TurntableWorks well.Start responds to the 33/45/78 rotation button and rotates normally.The stable rotation has also been confirmed using a stroboscope.- Fine adjustment of the rotation speed can be done normally within the range. ?There is no problem with the start/stop button response.?The strobe lights up without any bulb burnout.*This item is common for 50/60Hz. Tonearm/auto liftWorks well and outputs beautiful sound from the left and right channels.?The lifter moves up and down smoothly using the UP/DOWN lever.?The arm of ESOS automatically lifts up and stops rotating after playing without any problems.?The movement of the inside force canceller is also good.?The height of the arm can also be adjusted. There are no problems with all of the above operations, and it is a fully operational item.It will be a combination player system. Please make various fine adjustments to suit the winning bidders preferences. ?Product ContentsManufacturer: THORENSPlayer Model number: TD520Arm manufacturer/model number: SME 3012-R ?Accessories?dust cover?headshell (SME )?Lead wire x 4?Main weight/stylus pressure adjustment weight?Sub weight?Inside force canceller weight?SME cable (already installed)?New rubber belt (THORENS *A belt provided by our company was used at the time of shooting.)?Rubber mat (THORENS)?AC adapter (THORENS)?instruction manual for TD500 series (copy)?instruction manual for SME 3012-R (copy)?mounting template/alignment protractor (copy)?spindle oil?The record disc and the cartridge in the first photo are for presentation, they are not included. ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Choice Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of all housing parts yourself. Also possible in multiple colors!You can choose the color of all housing parts yourself. Multicolored also possible! Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 Professional - in your desired colorOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Housing: Painted in your desired color! Multi-colored paint finishes also possible. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. All required cable connections (flex) are located on the back. Device feet: Height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated p Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

THORENS TD520 Turntable Black & SME 3012-R w/ Shell Weight Tonearm Set Japan Description Condition: Used Each part has been polished/cleaned.Depending on the level of scratches, the dust cover is polished with a special abrasive and the finish is polished to enhance transparency. Polished the arm, platter, and metal parts until they were as clean as possible to remove dirt and rust.Dust cover/button part/platter/rubber mat- There is no major damage to the cover and it is transparent and clean.-The operation panel is also glossy, and the platter is also glossy with some dullness.-The rubber mat is also soft and shows no signs of deterioration or warping.Cabinet- Overall is shiny and in good condition with no major damage found.?All three hinges remain open without any kinks.Tonearm- There are no noticeable scratches and it is shiny and beautiful. It is in absolutely beautiful condition.Considering its age, we consider it to be in very good condition.?We perform aging for half a day to one day to confirm the operation. For this listing, we have carried out a comprehensive maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence.TurntableWorks well.Start responds to the 33/45/78 rotation button and rotates normally.The stable rotation has also been confirmed using a stroboscope.- Fine adjustment of the rotation speed can be done normally within the range. ?There is no problem with the start/stop button response.?The strobe lights up without any bulb burnout.*This item is common for 50/60Hz.Tonearm/auto liftWorks well and outputs beautiful sound from the left and right channels.?The lifter moves up and down smoothly using the UP/DOWN lever.?The arm of ESOS automatically lifts up and stops rotating after playing without any problems.?The movement of the inside force canceller is also good.?The height of the arm can also be adjusted.There are no problems with all of the above operations, and it is a fully operational item.It will be a combination player system. Please make various fine adjustments to suit the winning bidders preferences.?Product ContentsManufacturer: THORENSPlayer Model number: TD520Arm manufacturer/model number: SME 3012-R?Accessories?dust cover?headshell (SME )?Lead wire x 4?Main weight/stylus pressure adjustment weight?Sub weight?Inside force canceller weight?SME cable (already installed)?New rubber belt (THORENS *A belt provided by our company was used at the time of shooting.)?Rubber mat (THORENS)?AC adapter (THORENS)?instruction manual for TD500 series (copy)?instruction manual for SME 3012-R (copy)?mounting template/alignment protractor (copy)?spindle oil?The record disc and the cartridge in the first photo are for presentation, they are not included. Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Restored Turntable Thorens TD 520 Vogelaugenfurnier & Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 ProfessionalBirds eye veneer - high gloss finish - stainless steelThe vodel eye veneer is available in either black or dark blue (as shown).Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Device feet: Optionally height-adjustable spikes made of chrome-plated stainless steel (these are a little more subtle) or the device feet shown made of stainless steel (height adjustable, total weight 2520g, diameter 65mm, total height 28mm)Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all compo Marke Thorens (Restauriert von ART-and-SOUND) EAN Nicht zutreffend Modell TD 520

Original Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Revised 520 Professional original conditionin top conditionWith limit switchIncludes Ortofon Vinyl Master Alpha pickupNew RCA audio cable (permanently installed)Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Device feet: Optionally original or height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Turntable support: With antistatic effect! This plate support consists of a balanced mixture of rubber and non-antistatic cork granulate. The result is a perfect connection between vinyl record and plate. Suitable for Thorens turntables, this rubber/cork mat absorbs resonances and vibrations. This will significantly improve the sound of your turntable. Manufactured from natural resources in compliance with environmental standards. Specification: airborne sound-isolation-vibation-damping and anti-static effect.The following work will be carried out:Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Turntable support: With antistatic effect! This plate support consists of a balanced mixture of rubber and non-antistatic cork granulate. The result is a perfect connection between vinyl record and plate. Suitable for Thorens turntables, this rubber/cork mat absorbs resonances and vibrations. This will significantly improve the sound of your turntable. Ma Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

Zum Verkauf steht ein Hauptteller eines Thorens TD 2001. Das gleiche Tellermodell wurde in diversen Laufwerken eingesetzt und ist kompatibel zu sehr vielen Modellen wie: TD 320, 321, 520, 521, 318, 316, 144, 145, 160, 125, 126 Phonosophie No. 3 uvm. Wie man auf den Fotos sieht, ist das Teil ab Werk ausgewuchtet. Guter, gebrauchter Zustand ohne sichtbare Macken oder Beschädigungen. Das Tellermaterial (Zamak) ist altersgemäß angelaufen. Dieses Problem lässt sich manuell mit der Metarex-Polierwatte recht gut beheben. Lieferumfang, wie abgebildet. Der Preis ist fest und nicht verhandelbar.Privatverkauf, daher keine Rücknahme oder Garantie. Versicherter DHL-Versand

DescriptionAbout This Items Product ContentsManufacturer?THORENSPlayer Model Number?TD520Arm manufacturer/model number?SME 3012-R Product Informationhttps://audio-heritage.jp/THORENS/player/td520.html AccessoriesDust coverHead shell (SME)Lead wires x 4Main weight / Needle pressure adjustment weightSub weightInside force canceller weightSME cable (installed)New rubber belt (THORENS)Rubber mat (THORENS)AC adapter (THORENS)Instruction manual for TD500 series (copy)Instruction Manual for SME 3012-R (copy)Mounting template/alignment protractor (copy)Spindle oil ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Zum Verkauf steht ein Subteller eines Thorens TD 2001 der 2. Generation, der aus dem Vollen gedreht wurde. Das Teil ist komatibel mit den 10mm und den 7.15 mm - Achsen. Wie auf den Fotos zu sehen ist, gehört eine Achse nicht dazu, diese müsste verpresst werden. Der Subteller ist mit folgenden Laufwerken kompatibel: TD 2001, 320, Phonosophie No. 3, Ambiance.Mit dem TD 520/521 ist der Subteller nur kompatibel, wenn eine Stroboskopscheibe daran befestigt wird. Mit dem TD 3001 und der S-Variante von TD 520/521 ist der Subteller nicht kompatibel. Der Subteller ist zwar unbenutzt, wurde aber über ca. 25 Jahre suboptimal gelagert. Das erkennt man an dem langen Kratzer auf der Oberfläche, die ohnehin noch recht stark angelaufen ist. Der Artikel richtet sich ausdrücklich an Bastler, die in der Lage sind, eine Achse hydraulisch zu verpressen und die Oberfläche zu glätten. Lieferumfang, wie abgebildet. Bitte kaufen Sie den Artikel nur, wenn Sie sicher sind, dass er zu Ihrem Plattenspieler passt. Das Angebot umfasst keine technische Unterstützung. Hier wird bei Fragen auf das gute Analog-Forum verwiesen. Bitte keine Preisvorschläge abgeben. Der Preis ist fest und nicht verhandelbar.Privatverkauf, daher keine Garantie oder Rücknahme des Artikels bei Nichtgefallen.Versicherter DHL-Versand.

Original Control Panel for Turntable Thorens TD520 Cover Front PanelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Front panel for 520 turntableCondition: very good, with adhesive residue on the back, slightly bent and cannot be assembled Front panel for 520 turntable Condition: very good, with adhesive residue on the back, slightly bent and cannot be assembled Marke art-and-sound EAN Nicht zutreffend Markenkompatibilität Für Thorens Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Produktart Tonarmbasis

Choice Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of all housing parts yourself. Also possible in multiple colors!You can choose the color of all housing parts yourself. Multicolored also possible! Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 Professional - in your desired colorOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Housing: Painted in your desired color! Multi-colored paint finishes also possible. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. All required cable connections (flex) are located on the back. Device feet: Height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated p Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

Beautiful THORENS TD520 turntable with a fantastic SME 3012-R tonearm, factory assembled by Thorens. Additionally, it has a rarely used, very good Audio-Technica AT-OC9/II installation.The turntable plays and looks beautiful. Perfect condition, no scratches or cracks. The plastic casing is also in good condition, with no scratches or abrasions. Ive had it for a long time, but I need to sell part of my collection.Collection in person preferred, but shipping can also be arranged after prior e-mail contact.Regards.

Original Control Panel for Turntable Thorens TD520 Cover Front PanelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Front panel for 520 turntableCondition: very good, with adhesive residue on the back, slightly bent and cannot be assembled Front panel for 520 turntable Condition: very good, with adhesive residue on the back, slightly bent and cannot be assembled Marke art-and-sound EAN Nicht zutreffend Markenkompatibilität Für Thorens Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Produktart Tonarmbasis

Choice Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of all housing parts yourself. Also possible in multiple colors!You can choose the color of all housing parts yourself. Multicolored also possible! Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 Professional - in your desired colorOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Housing: Painted in your desired color! Multi-colored paint finishes also possible. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. All required cable connections (flex) are located on the back. Device feet: Height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated p Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

Restored Turntable Thorens TD 520 Vogelaugenfurnier & Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 ProfessionalBirds eye veneer - high gloss finish - stainless steelThe vodel eye veneer is available in either black or dark blue (as shown).Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Device feet: Optionally height-adjustable spikes made of chrome-plated stainless steel (these are a little more subtle) or the device feet shown made of stainless steel (height adjustable, total weight 2520g, diameter 65mm, total height 28mm)Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all compo Marke Thorens (Restauriert von ART-and-SOUND) EAN Nicht zutreffend Modell TD 520

Original Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Revised 520 Professional original conditionin top conditionWith limit switchIncludes Ortofon Vinyl Master Alpha pickupNew RCA audio cable (permanently installed)Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Device feet: Optionally original or height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Turntable support: With antistatic effect! This plate support consists of a balanced mixture of rubber and non-antistatic cork granulate. The result is a perfect connection between vinyl record and plate. Suitable for Thorens turntables, this rubber/cork mat absorbs resonances and vibrations. This will significantly improve the sound of your turntable. Manufactured from natural resources in compliance with environmental standards. Specification: airborne sound-isolation-vibation-damping and anti-static effect.The following work will be carried out:Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Turntable support: With antistatic effect! This plate support consists of a balanced mixture of rubber and non-antistatic cork granulate. The result is a perfect connection between vinyl record and plate. Suitable for Thorens turntables, this rubber/cork mat absorbs resonances and vibrations. This will significantly improve the sound of your turntable. Ma Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

Hello and thanks for checking out another great auction from Behind Door 3!We hope you enjoy the photos and information presented herein.If you have any questions, feel free to contact us for a prompt and friendly response. Pre-Owned in Great ConditionRare Vintage Thorens TD 160 MK II Turntable + Stanton Craze D5200 Cartridge TESTED - US SellerDevice: ThorensModel: TD 160 MK II The is in Great Condition and Fully Tested. Please see the video uploaded in the listing showing the exact item up for sale. The item is being sold from a US Seller and comes from the original owner. A brand new belt was installed by a technician and all features have been tested. The cartridge / needle installed is a Stanton Craze D5200 Cartridge. The only issue with the unit is the top lid and hinge. We are not sure if the hinge is the issue or the lid is missing a part. The lid also shows heavy signs of scratches and scuffs (see images). Please do your research prior to purchasing. Please view and inspect the images to verify the condition of the actual item you will receive. -Buy with Confidence-Thank you for checking out our listing Terms CA state sales tax applies While we can accept returns for an undescribed flaw or error in the listing, RETURNS FOR REASONS RELATING TO EITHER A CHANGE IN PERSONAL TASTE, PREFERENCE, OR OPINION ARE SUBJECT TO A RESTOCKING FEE. We encourage you to research the item you plan to purchase so you know what to expect when it arrives. When you commit to purchase the item, we commit to providing you with exactly what you purchase.We are here for you! If you have any questions simply contact us through the messaging system, or call our business office.M-F from 10:00-6:30 PST and Sat from 10:00-5:30

2021 Wartung, Kabel von Linn, Riemen und neues System Ortofon 2M Blue im Klangstudio Pohl erhalten, Haube hat Gebrauchsspuren - die übrige Anlage kann günstiger auf Anfrage erworben werden, TCD 2000 ist gerade bei Restek, FB ist auch vorhanden, Sie können auch vor Ort über einen Kauf entscheiden !

Thorens Plattenspieler Modell: TD 520 Professional Klassischer High End Plattenspieler aus bestem Hause, einer der letzten echten Thorens noch aus der guten Zeit. Allgemein Lieferumfang : Thorens Plattenspiler TD 520 Pro siehe Bilder Technisch : Voll Funktionstüchtig mit Netzteil ohne System Optisch : Sehr guter Zustand kaum Gebrauchsspuren Versand: Wir Versenden mit DHL / Kein Auslandsversand nur innerhalb Deutschland. Kaufpreis : Der Verkaufspreis beinhaltet die gesetzl. Mehrwertsteuer, diese wird jedoch nach §25a UstG (Differenzbesteuerung) auf der Rechnung nicht gesondert ausgewiesen. !!! Original Bilder !!!

Original Control Panel for Turntable Thorens TD520 Cover Front PanelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Front panel for 520 turntableCondition: very good, with adhesive residue on the back, slightly bent and cannot be assembled Front panel for 520 turntable Condition: very good, with adhesive residue on the back, slightly bent and cannot be assembled Marke art-and-sound EAN Nicht zutreffend Markenkompatibilität Für Thorens Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Produktart Tonarmbasis

Choice Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of all housing parts yourself. Also possible in multiple colors!You can choose the color of all housing parts yourself. Multicolored also possible! Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 Professional - in your desired colorOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Housing: Painted in your desired color! Multi-colored paint finishes also possible. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. All required cable connections (flex) are located on the back. Device feet: Height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated p Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

Restored Turntable Thorens TD 520 Vogelaugenfurnier & Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 ProfessionalBirds eye veneer - high gloss finish - stainless steelThe vodel eye veneer is available in either black or dark blue (as shown).Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Device feet: Optionally height-adjustable spikes made of chrome-plated stainless steel (these are a little more subtle) or the device feet shown made of stainless steel (height adjustable, total weight 2520g, diameter 65mm, total height 28mm)Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all compo Marke Thorens (Restauriert von ART-and-SOUND) EAN Nicht zutreffend Modell TD 520

Original Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Revised 520 Professional original conditionin top conditionWith limit switchIncludes Ortofon Vinyl Master Alpha pickupNew RCA audio cable (permanently installed)Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Device feet: Optionally original or height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Turntable support: With antistatic effect! This plate support consists of a balanced mixture of rubber and non-antistatic cork granulate. The result is a perfect connection between vinyl record and plate. Suitable for Thorens turntables, this rubber/cork mat absorbs resonances and vibrations. This will significantly improve the sound of your turntable. Manufactured from natural resources in compliance with environmental standards. Specification: airborne sound-isolation-vibation-damping and anti-static effect.The following work will be carried out:Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Turntable support: With antistatic effect! This plate support consists of a balanced mixture of rubber and non-antistatic cork granulate. The result is a perfect connection between vinyl record and plate. Suitable for Thorens turntables, this rubber/cork mat absorbs resonances and vibrations. This will significantly improve the sound of your turntable. Ma Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

Welcome to Audio/Video Archives, the largest home of audio literature available on eBay! This is a Reprint Review from 1987. It will have a full test of the item listed along with Specifications, Articles, Information and Commentary. The Picture is of the actual item. It will have a Test of the product, Specs, Commentary and Information about the item listed. It is a beautiful piece of Audio History. I have THOUSANDS more from every major brand of Audio from 1950 up to now. ---Satisfaction is GUARANTEED at AV Archives! Take a look at my feedback for satisfied customers! I have been open since 2007 and have sold THOUSANDS of Ads, Reviews, and Brochures to satisfied customers. ---I Ship Worldwide and combine shipping, each additional item is just $1 after the first is paid. ---Each Page is 8.5 by 11 unless otherwise noted in title. ---Single-Sided professional matte photo pages, unless otherwise noted in the title. ---These Ads and Reviews are perfect for framing and placed in your Audio Room. ---I have a HUGE Vinyl Record Store with Thousands of Collectable records, and MANY First Pressings/Audiophile LPs. Just click on my Vinyl Record Store link on the left under categories. Email me for any specific questions, You will hear back from me usually within 4 hours, THANK YOU! Greg Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Sehr guter Zustand. Very good condition.