Restored Thorens TD160 MKII Turntable Turquoise Blue With Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND 160 MKII black - turquoise blue with SME Series III tonarmOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with turquoise blue surface paintOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:High-gloss black finishDevice feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2220g, diameter 54mm, height 34mm. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180Cartridge MM system including installation: Ortofon VinylMaster Red (naked elliptical cut):      220Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut): 470 Ortofon 2MRed (elliptical):                99Ortofon 2M Blue (elliptical, naked):  190Ortofon 2M Bronze (Fineline):         390 Ortofon 2M Black (Shibata):            590 Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899Cartridge MC System including installation:AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO TECHNICA AT-OC9XSL (Special Line Contact): 799The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weigh Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens Turntable Either TD146 Ode 160 Mkii Turquoise Blue No SmeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.ATTENTION: This offer does not contain an SME tonearm but the original tonearms TP11 MKII or TP16 MKIIIndividual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) REVISED by ART-AND-SOUND Restored THORENS either TD146 or TD160 MKII in black-turquoise blue metallic (Both variants are visually identical) WITH A FIGHTING WEIGHT OF OVER 11 KG!!! Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. You can choose between TD146 or TD160 MKIITD146 Original tonearm:    TP 11 MKII, with replaceable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm TD160 MKIIOriginal tonearm:    TP 16 MKII, with replaceable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Cover plate: Cover plate made of 1mm aluminum with surface painting turquoise blue metallic Ortofon Vinyl Master Alpha pickup: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable: Paint finish glossy black Height-adjustable device feet: Stainless steel. The contact surface with the base is reduced to a minimum by 3 rubber buffers. Resonances and feedback are thus effectively prevented. The drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. -------- The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: ORTOFON 2M Red Verso (elliptical):                 99ORTOFON 2M Blue Verso (elliptical, naked): 199ORTOFON 2M Bronze Verso (Fineline):           390 ORTOFON 2M Black Verso (Shibata): 590 AUDIO-TECHNICA VM 740ML (Microlinear):                339AUDIO-TECHNICA VM 750 SH (Shibata):          439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata):            799AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO TECHNICA AT-OC9XSL (Special Line Contact): 799The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weigh Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Mehrfarbig Modell wahlweise TD146 oder TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160B Mkii Turntable IN Yellow Curry & Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! RESTORED by ART-AND-SOUND Restored 160B MKII in curry yellowwith SME 3009WITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:original, mint conditionThe Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).. --------The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM including installation:Ortofon Vinyl Master Silver (Fritz Gyger): €490The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact secur Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160B MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 MKII Turntable Black White Cream Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!The right switch is not available in this version; the lift is operated manually directly on the tonearm.The right switch is not available in this variant, the lift is operated manually directly on the tonearm.RESTORED by ART-AND-SOUND 160 MKII black - white cream with SME Series III tonarmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting white creamThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:High-gloss finish in black, turntable support in transparent acrylic glass, 7 single puck made of demagnetized stainless steelHeight-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2220g, diameter 54mm, height 34mm. Cartridge MM system including installation:   Cartridge MC System including installation: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Cette platine vinyle est disponible en 220V/50Hz ou 110V/50/60Hz en intérieur (par exemple USA ou Japon)Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay !Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay !RESTAURÉ par ART-AND-SON 160 MKII noir - bleu turquoise avec tonar SME Series IIImNos tourne-disques sont assemblés et assemblés avec amour à la main.Chacun deux est unique et diffère par son modèle, sa couleur et son grain de placage.Les boîtiers de haute qualité sont restaurés ou nouvellement fabriqués selon un savoir-faire qualifié.Les composants électriques sont vérifiés, Pièces mobiles huilées et pièces dusure remplacées.Un dernier test dendurance complète le travail complexe.Description de larticle :Fin de course :     NonPlaque intérieure : métalMandrin de roulement : 7mm Dimensions de base :            Largeur : 45 cm, profondeur : 36 cm, hauteur environ 18 cmLogement:Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Cest très complexe avec plusieurs couches de vernis très brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière.Façade :Plaque de recouvrement en aluminium de 1 mm avec peinture de surface bleu turquoiseMicro Ortofon Vinyl Master Alpha :Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. La VM Alpha est lentrée dans la série des platines vinyles de milieu de gamme.La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha puis améliorer la qualité en utilisant la fente daiguille suivante.Câble audio:Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace. Plaque tournante:Finition noire brillantePieds de lappareil:Réglable en hauteur, en acier inoxydable. La zone de contact avec le socle est réduite au minimum par 3 tampons en caoutchouc.Les résonances et les retours sont ainsi efficacement évités. Poids total 2220g, diamètre 54mm, hauteur 34mm. La courroie dentraînement :La courroie dentraînement est neuve. Il est fabriqué selon les spécifications originales de Thorens (même matériau et mêmes dimensions).Poids record :Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence. En lutilisant, vous augmentez les performances sonores de votre système.Ce qui suit les pièces sont comme Accessoiresör euhunliltique et pas composant ce enchères:Le suivant les pièces sont disponible comme accessoires et pas inclus dans ce enchères:Petite capuche (à poser sur le cadre) : 160Grande capuche (à poser sur la sous-structure) :    180Système à cartouche MM comprenant linstallation : Ortofon VinylMaster Rouge (coupe elliptique nue) :      220Ortofon VinylMaster Argent (nu Fritz Gyger coupe 70) : 470 Ortofon 2MRed (elliptique) :                99Ortofon 2M Bleu (elliptique, nu) :  190Ortofon 2M Bronze (Fineline) :         390 Ortofon 2M Noir (Shibata) :            590 Ortofon 2M Black LVB 250 (Shibata avec porte-aiguille en bore) : 899Système MC à cartouche comprenant linstallation :TECHNIQUE AUDIO AT-OC9XML (Microlinéaire) : 599TECHNIQUE AUDIO AT-OC9XSH (Shibata) : 699TECHNIQUE AUDIO AT-OC9XSL (Contact de ligne spéciale) : 799Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace. Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence.Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace. Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence.

Der Plattenspieler ist ca. 1985 neu gekauft worden und hatte nur einen Besitzer. Irgendwann Ende der 90er Jahre wurde er staubfrei und sicher eingelagert. Die neuerliche Inbetriebnahme hat aber leider gezeigt, dass die lange Lagerung den Chassisfedern geschadet hat. Das Chassis hängt - trotz gelöster Transportschrauben - durch, was dazu führt, dass der Plattenteller schleift, sobald man den Plattenteller startet. Ausserdem fehlt das Tonarmendrohr. Die Haube hat ein paar sichtbare Schrammen, aber die Scharniere sind in Ordnung. Netzteil und Riemen liegen bei. Original Puck für Single ist vorhanden und die Original Auflagematte. Original Bedienungsanleitung ist auch dabei. Bitte unbedingt die Bilder beachten - da habe ich versucht u. a. auch die Kratzer auf der Abdeckhaube zu zeigen. Privater Verkauf, daher KEINE Gewährleistung, KEINE Garantie oder Umtausch. Ausschluss Sachmängelhaftung. KEINE Rücknahme.Versand nur innerhalb Deutschland, Abholung möglich.

Der Plattenspieler ist ca. 1985 neu gekauft worden und hatte nur einen Besitzer. Irgendwann Ende der 90er Jahre wurde er staubfrei und sicher eingelagert. Die neuerliche Inbetriebnahme hat aber leider gezeigt, dass die lange Lagerung den Chassisfedern geschadet hat. Das Chassis hängt - trotz gelöster Transportschrauben - durch, was dazu führt, dass der Plattenteller schleift, sobald man den Plattenteller startet. Ausserdem fehlt das Tonarmendrohr. Die Haube hat ein paar sichtbare Schrammen, aber die Scharniere sind in Ordnung. Netzteil und Riemen liegen bei. Original Puck für Single ist vorhanden und die Original Auflagematte. Original Bedienungsanleitung ist auch dabei. Bitte unbedingt die Bilder beachten - da habe ich versucht u. a. auch die Kratzer auf der Abdeckhaube zu zeigen. Privater Verkauf, daher KEINE Gewährleistung, KEINE Garantie oder Umtausch. Ausschluss Sachmängelhaftung. KEINE Rücknahme.Versand nur innerhalb Deutschland, Abholung möglich.

Zu verkaufen ist ein Plattenspieler Thorens TD 160 MKII in schöner Mahagoni Zarge ab Werk. Die Zarge sowie der Plattenspieler sind optisch für das Alter sehr gut erhalten. Technisch läuft der Plattenspieler gut. Das Netzteil ist enthalten. Der Plattenspieler wird ohne Tonabnehmer abgegeben. Der zukünftige Besitzer wird sich diesbezüglich eh nach seinen Vorlieben richten. Die Haube ist ganz, gut kristallklar und weist mehrere feine Wischspuren auf der Oberfläche auf. An einer Stelle rechts innen sind ein Paar Anbrechungen, die nicht scharfkantig sind. Das Cinch-Kabel wurde durch moderneres hochwertigeres ersetzt. Das Gerät ist gebraucht. Abholung erwünscht, Versand auf Wunsch des Käufers möglich. Der Verkauf erfolgt unter Ausschluss jeglicher Sachmängelhaftung. Die Haftung auf Schadenersatz wegen Verletzungen von Gesundheit, Körper oder Leben und grob fahrlässiger und/oder vorsätzlicher Verletzungen meiner Pflichten als Verkäufer bleibt davon unberührt.

Der Plattenspieler ist ca. 1985 neu gekauft worden und hatte nur einen Besitzer. Irgendwann Ende der 90er Jahre wurde er staubfrei und sicher eingelagert. Die neuerliche Inbetriebnahme hat aber leider gezeigt, dass die lange Lagerung den Chassisfedern geschadet hat. Das Chassis hängt - trotz gelöster Transportschrauben - durch, was dazu führt, dass der Plattenteller schleift, sobald man den Plattenteller startet. Ausserdem fehlt das Tonarmendrohr. Die Haube hat ein paar sichtbare Schrammen, aber die Scharniere sind in Ordnung. Netzteil und Riemen liegen bei. Original Puck für Single ist vorhanden und die Original Auflagematte. Original Bedienungsanleitung ist auch dabei. Bitte unbedingt die Bilder beachten - da habe ich versucht u. a. auch die Kratzer auf der Abdeckhaube zu zeigen. Privater Verkauf, daher KEINE Gewährleistung, KEINE Garantie oder Umtausch. Ausschluss Sachmängelhaftung. KEINE Rücknahme.Versand nur innerhalb Deutschland, Abholung möglich.

Restored Thorens TD160 Mkii Turntable Black Petrol & Sme 3009 S IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! REVISED by ART-AND-SOUND Restored 160 MK II in black - petrol metallic with SME 3009 Series IIIWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting petrol metallicThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:High-gloss finish in black, turntable support in transparent acrylic glass, 7 single puck made of demagnetized stainless steelHeight-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160Hood large (to put on the base): 180Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Blue (Nude fineline cut): 299Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899Cartridge MC System including installation:AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO TECHNICA AT-OC9XSL (Special Line Contact): 799The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inneThe housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inne Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens Turntable wahlweise TD146 oder TD160 MKII Teal GreenThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) REVISED by ART-AND-SOUND Restored THORENS either TD146 or TD160 MKII in black-petrol metallic (Both variants are visually identical) WITH A FIGHTING WEIGHT OF OVER 11 KG!!! Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device. You can choose between TD146 or TD160 MKIITD146 Original tonearm:    TP 11 MKII, with replaceable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm TD160 MKIIOriginal tonearm:    TP 16 MKII, with replaceable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm Housing: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Cover plate: Cover plate made of 1mm aluminum with surface painting petrol metallic Ortofon Vinyl Master Alpha pickup: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Height-adjustable device feet: Stainless steel. The contact surface with the base is reduced to a minimum by 3 rubber buffers. Resonances and feedback are thus effectively prevented. The drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). -------- The following parts are available as accessories and are not part of this auction: The following parts are available as accessories and not included in this auction: Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: Cartridge MC System including installation: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection ar Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell wahlweise TD146 oder TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens Turntable wahlweise TD146 oder TD160 MKII Champagne MetThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) REVISED by ART-AND-SOUND Restored THORENS either TD146 or TD160 MKII in black-champagne metallic (Both variants are visually identical) WITH A FIGHTING WEIGHT OF OVER 11 KG!!! Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device. You can choose between TD146 or TD160 MKIITD146 Original tonearm:    TP 11 MKII, with replaceable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm TD160 MKIIOriginal tonearm:    TP 16 MKII, with replaceable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Cover plate: Cover plate made of 1mm aluminum with surface painting champagne metallic Ortofon Vinyl Master Alpha pickup: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Height-adjustable device feet: Stainless steel. The contact surface with the base is reduced to a minimum by 3 rubber buffers. Resonances and feedback are thus effectively prevented. The drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). -------- The following parts are available as accessories and are not part of this auction: The following parts are available as accessories and not included in this auction: Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: Cartridge MC System including installation: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection ar Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell wahlweise TD146 oder TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restaurierter Thorens TD 160 MKII Turntable Ice BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! RESTORED by ART-AND-SOUND 160 MK II with high-gloss lacquer coatingWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them differs in model, color or veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel:              10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmElectricity-. and audio cables are firmly connected to the turntable. New housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material.It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.New faceplate:New cover plate made of 1mm aluminum. The surface is coated with ice blue metallic paint.New Ortofon OM5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.New audio cable:Gold-plated HIGH END CINCH cable with strain relief. High-quality oxygen-free gold-plated solid connectors. Thicker, very well shielded cable including strain relief on both sides. The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --------The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM including installation: Ortofon 2M Blue (elliptical, naked): €219 Ortofon 2M Bronze (fine line): €360Ortofon Vinyl Master Silver (Fritz Gyger): €490Cartridge MC including installation:Quinted Bronze (fineline diamond cut): €640 With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it Herstellernummer nicht zutreffend Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 160 MKII

Restored Thorens TD160 B Mkii Sme 3009 Turntable Dark Ocean Blue MetThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Discount and more interesting offers from us... Take a look at... Art and Sound GermanyIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!Revised by ART-AND-SOUND Restored 160 B MKII with SME 3009 II in dark ocean blue metallicWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting dark ocean blue metallicThe Ortofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160Hood large (to put on the base):           180Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 399 The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact se Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 160 B MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens Td 160 Mkii Turntable & Sme Series III Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay! Information:In order to ensure an optimal basic setting of the record player, the record weight is omitted. The plate weight is not part of the offer.In order to ensure an optimal basic setting of the turntable, the record weight is omitted. The plate weight is not part of the offer.RESTORED by ART-AND-SOUND 160 MKII with SME Series III tonearmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width 45cm, depth 36cm, height 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface anodization in a gold lookThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact se Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD160 MKII

Der Plattenspieler ist ca. 1985 neu gekauft worden und hatte nur einen Besitzer. Irgendwann Ende der 90er Jahre wurde er staubfrei und sicher eingelagert. Die neuerliche Inbetriebnahme hat aber leider gezeigt, dass die lange Lagerung den Chassisfedern geschadet hat. Das Chassis hängt - trotz gelöster Transportschrauben - durch, was dazu führt, dass der Plattenteller schleift, sobald man den Plattenteller startet. Ausserdem fehlt das Tonarmendrohr. Die Haube hat ein paar sichtbare Schrammen, aber die Scharniere sind in Ordnung. Netzteil und Riemen liegen bei. Original Puck für Single ist vorhanden und die Original Auflagematte. Original Bedienungsanleitung ist auch dabei. Bitte unbedingt die Bilder beachten - da habe ich versucht u. a. auch die Kratzer auf der Abdeckhaube zu zeigen. Privater Verkauf, daher KEINE Gewährleistung, KEINE Garantie oder Umtausch. Ausschluss Sachmängelhaftung. KEINE Rücknahme.Versand nur innerhalb Deutschland, Abholung möglich.

Restored Thorens TD 160 MKII Turntable With Sme Series III oak WoodThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Discount and more interesting offers from us... Take a look at... Art and Sound GermanyIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!The oak frame is a natural product and always differs in grain. Figures 2 to 5 show the possible casings from which you can choose your desired oak frame.The oak frame is a natural product and always differs in grain. Figures 2 to 5 show the possible casings from which you can choose your desired oak frame.RESTORED by ART-AND-SOUND 160 Great with SME Series III tonarm and 100-year-old oak woodOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width 45cm, depth 36cm, height 18cm The housing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back. Faceplate:Cover plate made of 1mm aluminum with surface anodization in a gold lookThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180Cartridge MM system including installation: Normal 0 21 false false false DE X-NONE X-NONE Ortofon VinylMaster Red (naked elliptical cut): 190Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut): 460 Ortofon 2MRed (elliptical): 99Ortofon 2M Blue (elliptical, naked): 220Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 599 Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: AT-OC9XML (Microlinear): 599AT-OC9XSH (Shibata): 699AT-OC9XSL (Special Line Contact): 799 The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 160 MKII

Cette platine vinyle est disponible en 220V/50Hz ou 110V/50/60Hz en intérieur (par exemple USA ou Japon)Remises et offres plus intéressantes de notre part... Jeter un coup dœil à... Art et Son AllemagneFabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay !Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay !Le cadre en chêne est un produit naturel et présente toujours des veinures différentes. Les figures 2 à 5 montrent les encadrements possibles parmi lesquels vous pouvez choisir la charpente en chêne de votre choix.Le cadre en chêne est un produit naturel et présente toujours des veinures différentes. Les figures 2 à 5 montrent les encadrements possibles parmi lesquels vous pouvez choisir la charpente en chêne de votre choix.RESTAURÉ par ART-AND-SON 160 Idéal avec le tonar SME série IIIm et bois de chêne centenaireNos platines sont assemblées, modifiées et assemblées avec amour à la main.Chacun deux est unique et diffère par son modèle, sa couleur et son grain de placage.Les boîtiers de haute qualité sont restaurés ou nouvellement fabriqués selon un savoir-faire qualifié.Les composants électriques sont vérifiés, Pièces mobiles huilées et pièces dusure remplacées.Un dernier test dendurance complète le travail complexe.Le client reçoit un appareil haut de gamme. Description de larticle :Fin de course :     NonPlaque intérieure : métalMandrin de roulement : 7mm Dimensions de base :            Largeur 45cm, profondeur 36cm, hauteur 18cm Le logement :Le boîtier se compose de panneaux latéraux de 25 mm dépaisseur en bois de chêne massif (huilé) et dun fond en MDF de 16 mm dépaisseur. Le panneau de connexion pour toutes les connexions de câbles requises est situé à larrière. Façade :Plaque de recouvrement en aluminium de 1 mm avec anodisation de surface aspect doréLa cellule Ortofon Vinyl Master Alpha :Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. Le VM Alpha est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme.La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha puis améliorer la qualité en utilisant la fente daiguille suivante.Le câble audio :Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace.Le plateau tournant :Le plateau tournant est réalisé en cinq étapes complexes et chronophages poli pour une brillance élevée.Le vernis brillant donne à votre tourne-disque un look unique.Avec scellement de surface à laide dun revêtement protecteur spécial pour éviter le ternissement répété et pour une brillance durable.Pointes en acier inoxydable chromé:Pour que le tourne-disque soit découplé des vibrations basses fréquences, Le châssis est équipé de pointes réglables en hauteur. Les résonances et les retours sont ainsi efficacement évités. La courroie dentraînement :La courroie dentraînement est neuve. Il est fabriqué selon les spécifications originales de Thorens (même matériau et mêmes dimensions).Ce qui suit les pièces sont comme Accessoiresör euhunliltique et pas composant ce enchères:Le suivant les pièces sont disponible comme accessoires et pas inclus dans ce enchères:Petite capuche (à poser sur le cadre) : 160Grande capuche (à poser sur la sous-structure) :    180Système à cartouche MM comprenant linstallation : Normal 0 21 false false false DE X-NONE X-NONE Ortofon VinylMaster Rouge (coupe elliptique nue) : 190Ortofon VinylMaster Argent (nu Fritz Gyger coupe 70) : 460 Ortofon 2MRed (elliptique) : 99Ortofon 2M Bleu (elliptique, nu) : 220Ortofon 2M Bronze (Fineline) : 390 Ortofon 2M Noir (Shibata) : 599 Ortofon 2M Black LVB 250 (Shibata avec cantilever en bore) : 899 Système MC à cartouche comprenant linstallation : AT-OC9XML (microlinéaire) : 599AT-OC9XSH (Shibata) : 699AT-OC9XSL (contact de ligne spéciale) : 799 Le boîtier se compose de panneaux latéraux de 25 mm dépaisseur en bois de chêne massif (huilé) et dun fond en MDF de 16 mm dépaisseur. Le panneau de connexion pour toutes les connexions de câbles requises est situé à larrière. Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. Le VM Alpha est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme. Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la r

Biete hier Sie Thorens TD 160 MKII Schallplattenspieler Turntable mit Ortophon PRO S Nadelkopf Zustand : technisch vollfunktionsfähig . Optisch hat das Gerät einigen Mankos: Das Körper ist auf 3 Stelle gekrätzt und die Haube ist auf linke Seiten gebrochen/zerrisen aber ist fest und hält sich normal ! Auch die Scharnier auf rechte Seite ist nicht vollständig- bitte s. Fotos Wird sorgfälitg verpackt! Privat Verkauf,ohne Garantie!

Zu verkaufen ist ein Plattenspieler Thorens TD 160 MKII mit Tonabnehmer von Audio Technica. Optisch und technisch für das Alter gut erhalten. Die Haube mit Gebrauchsspuren. Die beiden Scharniere für die Haube fehlen. Der Vorbesitzer hat dem mit den zwei Gummischienen eine Abhilfe geschaffen - erfüllt ihren Zweck. In der Nähe des linken Scharniers der Zarge am Übergang Zarge/Chassis ist eine Kerbe/Delle. Das Gerät ist gebraucht. Abholung erwünscht, Versand möglich. Der Verkauf erfolgt unter Ausschluss jeglicher Sachmängelhaftung. Die Haftung auf Schadenersatz wegen Verletzungen von Gesundheit, Körper oder Leben und grob fahrlässiger und/oder vorsätzlicher Verletzungen meiner Pflichten als Verkäufer bleibt davon unberührt.

Restored Thorens TD160 MKII Turntable Turquoise Blue With Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND 160 MKII black - turquoise blue with SME Series III tonarmOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with turquoise blue surface paintOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:High-gloss black finishDevice feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2220g, diameter 54mm, height 34mm. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180Cartridge MM system including installation: Ortofon VinylMaster Red (naked elliptical cut):      220Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut): 470 Ortofon 2MRed (elliptical):                99Ortofon 2M Blue (elliptical, naked):  190Ortofon 2M Bronze (Fineline):         390 Ortofon 2M Black (Shibata):            590 Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899Cartridge MC System including installation:AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO TECHNICA AT-OC9XSL (Special Line Contact): 799The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weigh Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

ATTENTION : Cette offre ne contient pas de bras de lecture SME mais les bras de lecture dorigine TP11 MKII ou TP16 MKIIFabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay ! Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay ! Cette platine vinyle est disponible en 220V/ 50Hz ou 110V/60Hz (par exemple USA) RÉVISÉ par ART-AND-SON THORENS restauré soit TD146 ou TD160 MKII en noir-bleu turquoise métallisé (Les deux variantes sont visuellement identiques) AVEC UN POIDS DE COMBAT DE PLUS DE 11 KG !!! Nos tourne-disques sont assemblés et assemblés avec amour à la main. Chacun deux est unique et diffère par son modèle, sa couleur et son grain de placage. Les boîtiers de haute qualité sont restaurés ou nouvellement fabriqués selon un savoir-faire qualifié. Les composants électriques sont vérifiés, Pièces mobiles huilées et pièces dusure remplacées. Un dernier test dendurance complète le travail complexe. Vous pouvez choisir entre TD146 ou TD160 MKIITD146 Bras de lecture dorigine :    TP 11 MKII, avec tube de bras de lecture remplaçable Fin de course :         OUI Plaque intérieure :                  Plastique Mandrin de roulement : 7mm Source de courant:       avec bloc dalimentation enfichable Dimensions de base :                Largeur : 45 cm, profondeur : 36 cm, hauteur environ 20 cm TD160 MKIIBras de lecture dorigine :    TP 16 MKII, avec tube de bras de lecture remplaçable Fin de course :         Non Plaque intérieure :                  métal Mandrin de roulement :                  7mm Source de courant:       avec câble dalimentation Dimensions de base :                Largeur : 45 cm, profondeur : 36 cm, hauteur environ 20 cmÉgalement possible avec le bras de lecture SME ! Logement: Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Cest très complexe avec plusieurs couches de vernis très brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière. Plaque de couverture: Plaque de recouvrement en aluminium de 1 mm avec peinture de surface bleu turquoise métallisé Micro Ortofon Vinyl Master Alpha : Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. La VM Alpha est lentrée dans la série des platines vinyles de milieu de gamme. La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha puis améliorer la qualité en utilisant la fente daiguille suivante. Câble audio: Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace. Plaque tournante: Finition peinture noir brillant Pieds dappareil réglables en hauteur: Acier inoxydable. La surface de contact avec le socle est réduite au minimum par 3 tampons en caoutchouc. Les résonances et les retours sont ainsi efficacement évités. La courroie dentraînement : La courroie dentraînement est neuve. Il est fabriqué selon les spécifications originales de Thorens (même matériau et mêmes dimensions).Poids record :Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence. En lutilisant, vous augmentez les performances sonores de votre système. --------- Les pièces suivantes sont disponibles comme accessoires et ne font pas partie de cette vente aux enchères : Petite capuche (à poser sur le cadre) : 160 Grande capuche (à poser sur la sous-structure) :    180 Normal 0 21 false false false DE X-NONE X-NONE Système à cartouche MM comprenant linstallation : ORTOFON 2M Rouge Verso (elliptique) :                 99ORTOFON 2M Blue Verso (elliptique, nu) : 199ORTOFON 2M Bronze Verso (Fineline) :           390 ORTOFON 2M Verso Noir (Shibata) : 590 AUDIO-TECHNICA VM 740ML (Microlinéaire) :                339AUDIO-TECHNICA VM 750 SH (Shibata) :          439AUDIO-TECHNICA VM 760 SLC (ligne spéciale) : 699 Système MC à cartouche comprenant linstallation : AUDIO-TECHNICA AT-33EV (elliptique) : 499AUDIO-TECHNICA AT-33PTG/II (microlinéaire) : 599AUDIO-TECHNICA AT-33SA (Shibata) :            799AUDIO-TECHNICA AT-OC9XEB (elliptique) : 279AUDIO-TECHNICA AT-OC9XEN (elliptique, nu) : 369TECHNIQUE AUDIO AT-OC9XML (Microlinéaire) : 599TECHNIQUE AUDIO AT-OC9XSH (Shibata) : 699TECHNIQUE AUDIO AT-OC9XSL (Contact de ligne spéciale) : 799Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace. Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence.

Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz inside (for example UNITED STATES)!Revised by ART-AND-SOUND Restored 160 B MKII with SME 3009 II in dark ocean blue metallicWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting dark ocean blue metallicThe Ortofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small Hood large Cartridge MM system including installation: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact se