Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art-and-Sound Germany Bei Selbstabholung 70€ Rabatt!Revidiert von ART-AND-SOUND Restaurierter THORENS TD 125 MKII mit massiver Zarge aus Birnbaumholz Verschiedene SME Tonarme sind optional möglich20kg Plattenspieler Bitte beachten Sie, daß Holz ein Naturprodukt ist. Die Maserung und der Farbton werden sich immer von den Artikelfotos unterscheiden. Artikelbeschreibung: Tonabnehmer: Ortofon OM5E Gerätefüße: Spikes, höhenverstellbar Endabschaltung: NeinInnenteller: MetallSpindel: 10 mmGrundmaße: Breite: 525mm, Tiefe: 413mm, Höhe 97mm Folgende Arbeiten werden durchgeführt: Revision elektronischer und mechanischer Bauteile, Um- bzw. Einbau benötigter Komponenten, Neue Gehäuseinnenverkabelung (Audio mit sommer cable), Neues Headshellkabel, Einstellung und Abgleich der verschiedenen Geschwindigkeiten, Einstellung und Justierung der Federung, Überprüfung und Einstellung des Tonarmes und des Tonabnehmers, schonende Reinigung und Pflege des gesamten Plattenspielers, Dauerlauftest, Abnahme und VDE-Sicherheitsprüfung Gehäuse: Das Gehäuse besteht aus 40mm massiven Birnenholz und einem 16 mm starken Boden aus MDF. Die Oberfläche wurde mehrfach geölt und poliert. An der Rückseite befindet sich das Anschlusspanel für alle benötigten Kabel. Am Gehäuseboden sind vier höhenverstellbare Spikes aus verchromten Edelstahl installiert. Der Boden ist mit dem Rahmen verschraubt und kann leicht entfernt werden.Grundmaße der Zarge (ohne Füße): 525mm x 413mm x 97mmGewicht (ohne Füße): ca. 6,3 kg Tonabnehmer Ortofon OM5E: Das Ortofon OM5E ist ein vollwertiger Tonabnehmer. Es überzeugt durch Temperament und einen neutralen Grundcharakter. Das OM5E verfügt über einen elliptischen Stift, der eine ausgewogene und verzerrungsfreie Wiedergabe ermöglicht. Audiokabel: Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Antriebsriemen: Der Antriebsriemen wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. Schallplattengewicht aus Edelstahl: Mit einem Gewicht von 310g sorgt es dafür, dass die Schallplatte glatt auf dem Teller aufliegt und ruhig durchläuft. Dieses Schallplattengewicht spielt in der mittleren Gewichtsklasse. Es baut gerade soviel Gewicht auf, die Schwingungen der Platte zu dämpfen ohne die Lagerbuchsen zu beanspruchen. Die Federung des Thorens-Subchassis wurde entsprechend neu eingestellt. Durch seinen Einsatz erhöhen Sie die Klangleistung Ihrer Anlage. Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion: Haube zum Auflegen auf das Gehäuse: 160 Gerätefüße aus Edelstahl (Bild 11 und 12), höhenverstellbar, Gesamtgewicht 2520g, Durchmesser 65mm, Höhe 25mm: 90 Mögliche Tonabnehmer für Tonarm TP16, MM Systeme inklusive Installation: AUDIO-TECHNICA VM 95ML (Microlinear): 179 AUDIO-TECHNICA VM 95SH (Shibata): 219AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (Special-Line-Contact): 699 Mögliche Tonabnehmer für Tonarm TP16, MC Systeme inklusive Installation: ORTOFON Quintet Red (elliptisch): 349 ORTOFON Quintet Blue (elliptisch, nackt): 549 ORTOFON Quintet Bronze (Fineline): 749 ORTOFON Quinted Black (Shibata): 899 AUDIO-TECHNICA AT-OC9XEB (elliptisch): 279 AUDIO-TECHNICA AT-OC9XEN (elliptisch, nackt): 369 AUDIO-TECHNICA AT-33EV (elliptisch): 499 AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599 AUDIO-TECHNICA AT-33SA (Shibata): 799Mögliche SME Tonarme inklusive Tonaebnehmer Ortofon VinylMaster Alpha: SME Series III (Bild 12), wechselbares Tonarmrohr, eff. Masse ca.5g: 690 SME 3009 improved (Bild 13), festes Headshell, eff. Masse 6,5g: 690SME 3009 S2 improved (Bild 14), wechselbares Headshell, eff. Masse 9,5g: 690 Mögliche Tonabnehmer für SME Tonarme, MM Systeme inklusive Installation: Ortofon 2M Red (elliptisch): 90 Ortofon 2M Blue (elliptisch, nackt): 190 Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata mit Bor-Nadelträger): 890 Mögliche Tonabnehmer für SME Tonarme, MC Systeme inklusive Installation: AUDIO-TECHNICA AT-OC9XML (Microlinear): 599 AUDIO-TECHNICA AT-OC9XSH (Shibata): 699 AUDIO-TECHNICA AT-OC9XSL (Special-Line-Contact): 799

THORENS TD-125 MK II - MOTOR Der Motor stammt aus einem voll funktionsfähigen Thorens TD-125 MK II. Er lief zuletzt am 13.12.2024. Er läuft sehr schnell an und hält die Geschwindigkeiten stabil. For international byers: Please do not buy if you don´t understand my item description for 100%. If you have questions you can contact me anytime. Versand: Alle Geräte werden ausschließlich mit DHL versendet (innerhalb Deutschlands und auch international). Alle Geräte werden mit Luftpolsterfolie umwickelt und sicher in einem stabilen doppelwelligen Karton verpackt. Zusätzlich kommt zwischen dem Gerät und dem Karton ausreichend Styrofill Füllmaterial, um einen bestmöglich erschütterungsfreien Transport zu gewährleisten. Bemerkung: Alle meine Artikel werden mit hochauflösenden, ungeschönten Fotos hier eingestellt. In meinen Artikelbeschreibungen werden alle Mängel, die mir auffallen präzise beschrieben (soweit es mir möglich ist). Ich biete jedem Interessierten an, die Artikel bei mir vor Ort zu besichtigen und zu prüfen/testen. Geliefert wird ausschließlich das, was auf den Fotos zu sehen ist. Wenn sie weitere Fragen haben, können sie gerne mit mir Kontakt aufnehmen.

THORENS TD-125 MK II - MOTORSTEUERUNG - SPEED CONTROL BOARD Die Motorsteuerung stammt aus einem voll funktionsfähigen Thorens TD-125 MK II und lief zuletzt am 13.12.2024.Sie ist technisch einwandfrei. For international byers: Please do not buy if you don´t understand my item description for 100%. If you have questions you can contact me anytime. Versand: Alle Geräte werden ausschließlich mit DHL versendet (innerhalb Deutschlands und auch international). Alle Geräte werden mit Luftpolsterfolie umwickelt und sicher in einem stabilen doppelwelligen Karton verpackt. Zusätzlich kommt zwischen dem Gerät und dem Karton ausreichend Styrofill Füllmaterial, um einen bestmöglich erschütterungsfreien Transport zu gewährleisten. Bemerkung: Alle meine Artikel werden mit hochauflösenden, ungeschönten Fotos hier eingestellt. In meinen Artikelbeschreibungen werden alle Mängel, die mir auffallen präzise beschrieben (soweit es mir möglich ist). Ich biete jedem Interessierten an, die Artikel bei mir vor Ort zu besichtigen und zu prüfen/testen. Geliefert wird ausschließlich das, was auf den Fotos zu sehen ist. Wenn sie weitere Fragen haben, können sie gerne mit mir Kontakt aufnehmen.

Original Terminal Block Tonarmkabel Thorens Td 125 And Mkii TurntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Tonearm cable strip connectionTonearm cable strip connection Herstellernummer nicht zutreffend Marke Thorens Produktart KabelLeiste Markenkompatibilität Thorens EAN Nicht zutreffend

Connexion de la bande de câble du bras de lectureConnexion de la bande de câble du bras de lecture

Tonearm cable strip connectionTonearm cable strip connection

Original Tellermatte Mat Slipmate Edition Turntable Thorens Td 125 & MkiiThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original Thorens turntable matsuitable for Thorens TD125 and TD125 MKIIvery good, cleanedOriginal Thorens turntable mat suitable for Thorens TD125 and TD125 MKII very good, cleaned Marke Thorens EAN Nicht zutreffend Markenkompatibilität Thorens Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Produktart Tellermatte

Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art-and-Sound Germany Bei Selbstabholung 70€ Rabatt!Revidiert von ART-AND-SOUND Restaurierter THORENS TD 125 MKII mit SME 3009 und Zarge aus Birnbaumholz 20kg Plattenspieler Bitte beachten Sie, daß Holz ein Naturprodukt ist. Die Maserung und der Farbton werden sich immer von den Artikelfotos unterscheiden. Artikelbeschreibung: Tonabnehmer: Ortofon VinylMaster Alpha Gerätefüße: Spikes, höhenverstellbar Endabschaltung: NeinInnenteller: MetallSpindel: 10 mmGrundmaße: Breite: 525mm, Tiefe: 413mm, Höhe 97mm Folgende Arbeiten werden durchgeführt: Revision elektronischer und mechanischer Bauteile, Um- bzw. Einbau benötigter Komponenten, Neue Gehäuseinnenverkabelung (Audio mit sommer cable), Neues Headshellkabel, Einstellung und Abgleich der verschiedenen Geschwindigkeiten, Einstellung und Justierung der Federung, Überprüfung und Einstellung des Tonarmes und des Tonabnehmers, schonende Reinigung und Pflege des gesamten Plattenspielers, Dauerlauftest, Abnahme und VDE-Sicherheitsprüfung Gehäuse: Das Gehäuse besteht aus 40mm massiven Birnenholz und einem 16 mm starken Boden aus MDF. Die Oberfläche wurde mehrfach geölt und poliert. An der Rückseite befindet sich das Anschlusspanel für alle benötigten Kabel. Am Gehäuseboden sind vier höhenverstellbare Spikes aus verchromten Edelstahl installiert. Der Boden ist mit dem Rahmen verschraubt und kann leicht entfernt werden.Grundmaße der Zarge (ohne Füße): 525mm x 413mm x 97mmGewicht (ohne Füße): ca. 6,3 kg Tonabnehmer Ortofon VinylMaster Alpha: Das Ortofon VM Alpha ist ein vollwertiger Tonabnehmer. Es überzeugt durch Temperament und einen neutralen Grundcharakter. Das VinylMaster Alpha verfügt über einen elliptischen Stift, der eine ausgewogene und verzerrungsfreie Wiedergabe ermöglicht. Audiokabel: Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Antriebsriemen: Der Antriebsriemen wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. Schallplattengewicht aus Edelstahl: Mit einem Gewicht von 310g sorgt es dafür, dass die Schallplatte glatt auf dem Teller aufliegt und ruhig durchläuft. Dieses Schallplattengewicht spielt in der mittleren Gewichtsklasse. Es baut gerade soviel Gewicht auf, die Schwingungen der Platte zu dämpfen ohne die Lagerbuchsen zu beanspruchen. Die Federung des Thorens-Subchassis wurde entsprechend neu eingestellt. Durch seinen Einsatz erhöhen Sie die Klangleistung Ihrer Anlage. Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion: Haube zum Auflegen auf das Gehäuse: 160 Gerätefüße aus Edelstahl (Bild 5 und 6), höhenverstellbar, Gesamtgewicht 2520g, Durchmesser 65mm, Höhe 25mm: 90 Mögliche Tonabnehmer für SME Tonarme, MM Systeme inklusive Installation: Ortofon 2M Red (elliptisch): 90 Ortofon 2M Blue (elliptisch, nackt): 190 Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata mit Bor-Nadelträger): 890 Mögliche Tonabnehmer für SME Tonarme, MC Systeme inklusive Installation: AUDIO-TECHNICA AT-OC9XML (Microlinear): 599 AUDIO-TECHNICA AT-OC9XSH (Shibata): 699 AUDIO-TECHNICA AT-OC9XSL (Special-Line-Contact): 799

Restored Thorens TD 125 MKII turntable with SME 3009 pear wood frame The description of this item has been automatically translated. If you have any questions, please feel free to contact us. See also this products: Restored Thorens TD 125 MKII Turntable With Sme 3009 IN Pear Wood Restored Thorens TD 125 MKII Turntable Frame Elsberry Sme 3009 Possible Restored Thorens TD 125 MKII Turntable With Sme Tracking Arm 3009 Restored Thorens TD 125 MKII Turntable Also Sme 3009 Possible Restored Thorens TD 125 MKII Turntable Massive Frame Made From Pear Wood Restored Thorens TD 125 MKII Turntable Sme White/Marbled Restored Thorens TD 125 MKII Turntable Sme White/Orange Restored Thorens TD 125 MKII Turntable Sme White/Burgundy Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend

Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art-and-Sound Germany Bei Selbstabholung 70€ Rabatt!Revidiert von ART-AND-SOUND Restaurierter THORENS TD 125 MKII mit Tonarm Thorens TP16 Verschiedene SME Tonarme sind optional möglich20kg Plattenspieler Zarge aus massiver Elsbeere, die seltene Schönheit, mit einer sehr feinen und leicht schimmernden Maserung. Sie ist eine der seltensten und kostbarsten Baumarten in Deutschland. Sie kann bis zu 300 Jahre alt und 30m hoch werden. Das Holz der Elsbeere wurde bei der Pariser Weltausstellung zum schönsten Holz der Welt gekürt. Bis heute ist es eines der edelsten Hölzer und wird von Schreinern und Drechslern, aber auch von Musikinstrumentenbauern für seine hohe Belastbarkeit, Elastizität und Festigkeit sehr geschätzt.Bitte beachten Sie, daß Holz ein Naturprodukt ist. Die Maserung und der Farbton werden sich immer von den Artikelfotos unterscheiden. Artikelbeschreibung: Tonabnehmer: Ortofon OM5E Gerätefüße: Spikes, höhenverstellbar Endabschaltung: NeinInnenteller: MetallSpindel: 10 mmGrundmaße: Breite: 525mm, Tiefe: 413mm, Höhe 97mm Folgende Arbeiten werden durchgeführt: Revision elektronischer und mechanischer Bauteile, Um- bzw. Einbau benötigter Komponenten, Neue Gehäuseinnenverkabelung (Audio mit sommer cable), Neues Headshellkabel, Einstellung und Abgleich der verschiedenen Geschwindigkeiten, Einstellung und Justierung der Federung, Überprüfung und Einstellung des Tonarmes und des Tonabnehmers, schonende Reinigung und Pflege des gesamten Plattenspielers, Dauerlauftest, Abnahme und VDE-Sicherheitsprüfung Gehäuse: Das Gehäuse besteht aus 40mm massiven schweizer Birnholz Seitenteilen und einem 16 mm starken Boden aus MDF. Die Oberfläche wurde mehrfach geölt und poliert. An der Rückseite befindet sich das Anschlusspanel für alle benötigten Kabel. Am Gehäuseboden sind vier höhenverstellbare Spikes aus verchromten Edelstahl installiert. Der Boden ist mit dem Rahmen verschraubt und kann leicht entfernt werden.Grundmaße der Zarge (ohne Füße): 525mm x 413mm x 97mmGewicht (ohne Füße): ca. 6,3 kg Tonabnehmer Ortofon OM5E: Das Ortofon OM5E ist ein vollwertiger Tonabnehmer. Es überzeugt durch Temperament und einen neutralen Grundcharakter. Das OM5E verfügt über einen elliptischen Stift, der eine ausgewogene und verzerrungsfreie Wiedergabe ermöglicht. Audiokabel: Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Antriebsriemen: Der Antriebsriemen wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. Schallplattengewicht aus Edelstahl: Mit einem Gewicht von 310g sorgt es dafür, dass die Schallplatte glatt auf dem Teller aufliegt und ruhig durchläuft. Dieses Schallplattengewicht spielt in der mittleren Gewichtsklasse. Es baut gerade soviel Gewicht auf, die Schwingungen der Platte zu dämpfen ohne die Lagerbuchsen zu beanspruchen. Die Federung des Thorens-Subchassis wurde entsprechend neu eingestellt. Durch seinen Einsatz erhöhen Sie die Klangleistung Ihrer Anlage. Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion: Haube zum Auflegen auf das Gehäuse: 160 Gerätefüße aus Edelstahl (Bild 10 und 11), höhenverstellbar, Gesamtgewicht 2520g, Durchmesser 65mm, Höhe 25mm: 90 Mögliche Tonabnehmer für Tonarm TP16, MM Systeme inklusive Installation: AUDIO-TECHNICA VM 95ML (Microlinear): 179 AUDIO-TECHNICA VM 95SH (Shibata): 219AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (Special-Line-Contact): 699 Mögliche Tonabnehmer für Tonarm TP16, MC Systeme inklusive Installation: ORTOFON Quintet Red (elliptisch): 349 ORTOFON Quintet Blue (elliptisch, nackt): 549 ORTOFON Quintet Bronze (Fineline): 749 ORTOFON Quinted Black (Shibata): 899 AUDIO-TECHNICA AT-OC9XEB (elliptisch): 279 AUDIO-TECHNICA AT-OC9XEN (elliptisch, nackt): 369 AUDIO-TECHNICA AT-33EV (elliptisch): 499 AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599 AUDIO-TECHNICA AT-33SA (Shibata): 799Mögliche SME Tonarme inklusive Tonaebnehmer Ortofon VinylMaster Alpha: SME Series III (Bild 12), wechselbares Tonarmrohr, eff. Masse ca.5g: 690 SME 3009 improved (Bild 13), festes Headshell, eff. Masse 6,5g: 690SME 3009 S2 improved (Bild 14), wechselbares Headshell, eff. Masse 9,5g: 690 Mögliche Tonabnehmer für SME Tonarme, MM Systeme inklusive Installation: Ortofon 2M Red (elliptisch): 90 Ortofon 2M Blue (elliptisch, nackt): 190 Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata mit Bor-Nadelträger): 890 Mögliche Tonabnehmer für SME Tonarme, MC Systeme inklusive Installation: AUDIO-TECHNICA AT-OC9XML (Microlinear): 599 AUDIO-TECHNICA AT-OC9XSH (Shibata): 699 AUDIO-TECHNICA AT-OC9XSL (Special-Line-Contact): 799

Restored Thorens TD 125 MKII Turntable Frame Elsbeere SME 3009 PossibleThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on eBay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 125 MKII with Thorens TP16 tonearm Various SME tonearms are optionally available20kg record playerFrame made of solid wild service wood, the rare beauty, with a very fine and slightly shimmering grain. It is one of the rarest and most valuable tree species in Germany. It can live up to 300 years and grow up to 30m tall. The wood of the service tree was voted the most beautiful wood in the world at the Paris World Exhibition. To this day, it is one of the finest woods and is highly valued by carpenters and wood turners, but also by musical instrument makers for its high resilience, elasticity and strength.Please note that wood is a natural product. The grain and color tone will always differ from the item photos.Item description:Pickup: Ortofon OM5EDevice feet: Spikes, height adjustableLimit switch: NoInner plate: metalSpindle: 10mmBasic dimensions: Width: 525mm, Depth: 413mm, Height 97mmThe following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of required components, new internal housing wiring (audio with sommer cable), new headshell cable, setting and adjustment of the various speeds, setting and adjustment of the suspension, checking and setting the tone arm and the pickup, careful cleaning and care of the entire record player, endurance test, acceptance and VDE safety test Housing: The case consists of 40mm solid Swiss pearwood side panels and a 16mm thick MDF base. The surface has been oiled and polished several times. On the back there is the connection panel for all necessary cables. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case bottom. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): approx. 6.3kgCartridge Ortofon OM5E: The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback.Audio cable: Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. Drive belt: The drive belt is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight: With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:Hood to place on the housing: 160Stainless steel feet (Picture 10 and 11), height adjustable, total weight 2520g, diameter 65mm, height 25mm: 90Possible pickups for tonearm TP16, MM systems including installation: AUDIO-TECHNICA VM 95ML (Microlinear): 179 AUDIO-TECHNICA VM 95SH (Shibata): 219AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (Special Line Contact): 699 Possible pickups for tonearm TP16, MC systems including installation: ORTOFON Quintet Red (elliptical): 349 ORTOFON Quintet Blue (elliptical, naked): 549 ORTOFON Quintet Bronze (Fineline): 749 ORTOFON Quinted Black (Shibata): 899 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799Possible SME tonearms including Ortofon VinylMaster Alpha cartridge:SME Series III (picture 12), exchangeable tonearm tube, eff. Mass approx. 5g: 690 SME 3009 improved (Figure 13), fixed headshell, eff. Mass 6.5g: 690SME 3009 S2 improved (picture 14), exchangeable headshell, eff. Mass 9.5g: 690Possible pickups for SME tonearms, MM systems including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata with boron stylus): 890Possible pickups for SME tonearms, MC systems including installation: AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Frame made of solid wild service wood, the rare beauty, with a very fine and slightly shimmering grain. It is one of the rarest and most valuable tree species in Germany. It can live up to 300 years and grow up to 30m tall. The wood of the service tree was voted the most beautiful wood in the world at the Paris World Exhibition. To this day, it is one of the finest woods and is highly valued by carpenters and wood turners, but also by musical instrument makers for its high resilience, elasticity and strength. The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of required components, new internal housing wiring (audio with sommer cable), new headshell cable, setting and adjustment of the various speeds, setting and adjust Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend

Tonarmboard ist für 9 SME Tonarme ohne Tonarmvoll funktionstüchtig ohne EinschränkungDrehstabfedern sind derzeit ausgehängt , um die Haube zu schonen gebraucht, mit den üblichen Gebrauchsspuren,aber keine Risse oder Schrammen an der Holzzarge benutze den SME 3009 / S3 an meinem TD 226ggfs. kann ein SME Arm gegen Aufpreis geliefert werden zB SME 3009 S2 plus 500.- = 1300.- ohne System Versand möglich, Abholung bevorzugt

Massive wooden case for Thorens TD 125 and 125 MKII turntable The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Casing made of solid wood, oiledfor Thorens TD125 and 125 MKII turntablesWhen installed, the record player closes approx. flush with the housing in the upper areaCase frame: 50.5cm x 41cm x 9.5cm / base: sturdy 14mm MDF board / weight: 4.5 kgInternal dimensions: 440 x 345 x 83 mmOiled surfaceDevice feet to be placed underneath, hard foam (see photos)Visual condition: used, the outer frame is as good as new with no visual defectsCasing made of solid wood, oiled for Thorens TD125 and 125 MKII turntables When installed, the record player closes approx. flush with the housing in the upper area Case frame: 50.5cm x 41cm x 9.5cm / base: sturdy 14mm MDF board / weight: 4.5 kg Internal dimensions: 440 x 345 x 83 mm Oiled surface Device feet to be placed underneath, hard foam (see photos) Visual condition: used, the outer frame is as good as new with no visual defects See also this products: Case Frame Chassis for Thorens Td 125 And Mkii From oak Wood Massive Oiled Case Frame Chassis for Thorens Td 125 And Mkii From oak Wood Massive Lubricated Original Terminal Block Tonarmkabel Thorens Td 125 And Mkii Turntable Original Motor for Thorens Td 280 Mkii Turntable Case Frame Chassis for Thorens Td 125 And Mkii From Nussbaumholz Massive Oiled Original Frame Casing for Turntable Thorens Td Series Original Frame Casing for Thorens Td Series Turntable Original Tellermatte Mat Slipmate Edition Turntable Thorens Td 125 & Mkii Herstellernummer nicht zutreffend Marke Markenlos Produktart Zarge Markenkompatibilität Thorens EAN Nicht zutreffend

Restored Thorens TD 125 MKII Turntable Also Sme 3009 PossibleThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 125 MKII in flight green and stainless steelAlso possible with different SME 3009 tonearms20kg turntableOur record players are lovingly put together, restored and assembled by hand. Each of them is unique and differs in model, color, veneer grain or other details. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:      NoInner plate: metalSpindle: 10mmBasic dimensions:            Width: 525mm, depth: 413mm, height 97mThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of endurance testHousing:The housing consists of 40mm MDF side panels and a 16mm thick base, also made of MDF. The surface was painted several times and then polished. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): 6.3 kgOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. Drive belt:The drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood:for placing on the housing: 160 Device feet XXL: 90Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2520g, diameter 65mm, height 26mmSME tonearms (the matching systems are selected according to the tonearms): SME Series III (replaceable tonearm tube, eff. Mass approx. 5g): 690 SME 3009 improved (fixed headshell, eff. Mass 6.5g): 690 SME 3009 S2 improved (replaceable headshell, eff. Mass 9.5g): 690 SME 3009 Series II (replaceable headshell, eff. Mass 12.5g): 790 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799Our record players are lovingly put together, restored and assembled by hand. Each of them is unique and differs in model, color, veneer grain or other details. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g Antriebstyp Riemenantrieb Marke Thorens EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Original Thorens Nf Cable Connection for Td 125 MkiiThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original Thorens NF cable connection for TD 125 MKII   Original Thorens NF cable connection for TD 125 MKII   Herstellernummer nicht zutreffend Marke Thorens Markenkompatibilität Thorens Produktart Gehäuse EAN Nicht zutreffend

Restored Thorens TD 125 MKII Turntable Sme White/MarbledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.RESTORED by ART-AND-SOUND Restored 125 MKII with SME 3009 tonearmDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmAudio and Power cables are firmly connected to the turntable. The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum painted black / gold, tonearm board / tonearm base newThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Original SME cableThe turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 112401191474The following parts are available as accessories and not included in this auction:Hood (to put on the housing):    German eBay-article number is 112401191474Cartridge MM systems including installation: Cartidge MC systems including installation:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strai Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Restored Thorens TD 125 MKII turntable SME white / orange The description of this item has been automatically translated. If you have any questions, please feel free to contact us. See also this products: Restored Thorens TD 125 MKII Turntable Sme White/Marbled Restored Thorens TD 125 MKII Turntable Sme White/Burgundy Restored Thorens TD 125 MKII Turntable Sme White/Ice Blue Restored Thorens TD 125 MKII Turntable Sme White/Stainless Steel Restored Thorens TD 125 MKII Turntable Also Sme 3009 Possible Restored Thorens TD 125 MKII Turntable Frame Elsberry Sme 3009 Possible Restored Thorens TD 125 MKII Turntable IN Black Orange Restored Thorens TD 125 MKII Turntable With Sme Tracking Arm 3009 Antriebstyp Riemenantrieb Ausländisches Produkt Ja Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellernummer nicht zutreffend Modifizierter Artikel Ja Herstellungsland und -region Deutschland EAN Nicht zutreffend

Tonarmboard ist für 9 SME Tonarme ohne Tonarmvoll funktionstüchtig ohne EinschränkungDrehstabfedern sind derzeit ausgehängt , um die Haube zu schonen gebraucht, mit den üblichen Gebrauchsspuren,aber keine Risse oder Schrammen an der Holzzarge benutze den SME 3009 / S3 an meinem TD 226ggfs. kann ein SME Arm gegen Aufpreis geliefert werden zB SME 3009 S2 plus 500.- = 1300.- ohne System Versand möglich, Abholung bevorzugt

Restored Thorens TD 125 MKII turntable solid frame made of pear woodThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on eBay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 125 MKII with solid pear wood frame Various SME tonearms are optionally available20kg record playerPlease note that wood is a natural product. The grain and color tone will always differ from the item photos.Item description:Pickup: Ortofon OM5EDevice feet: Spikes, height adjustableLimit switch: NoInner plate: metalSpindle: 10mmBasic dimensions: Width: 525mm, Depth: 413mm, Height 97mmThe following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of required components, new internal housing wiring (audio with sommer cable), new headshell cable, setting and adjustment of the various speeds, setting and adjustment of the suspension, checking and setting the tone arm and the pickup, careful cleaning and care of the entire record player, endurance test, acceptance and VDE safety test Housing: The housing is made of 40mm solid pear wood and a 16mm thick MDF base. The surface has been oiled and polished several times. On the back there is the connection panel for all necessary cables. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case bottom. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): approx. 6.3kgCartridge Ortofon OM5E: The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback.Audio cable: Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. Drive belt: The drive belt is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight: With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:Hood to place on the housing: 160Stainless steel feet (Pictures 11 and 12), height adjustable, total weight 2520g, diameter 65mm, height 25mm: 90Possible pickups for tonearm TP16, MM systems including installation: AUDIO-TECHNICA VM 95ML (Microlinear): 179 AUDIO-TECHNICA VM 95SH (Shibata): 219AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (Special Line Contact): 699 Possible pickups for tonearm TP16, MC systems including installation: ORTOFON Quintet Red (elliptical): 349 ORTOFON Quintet Blue (elliptical, naked): 549 ORTOFON Quintet Bronze (Fineline): 749 ORTOFON Quinted Black (Shibata): 899 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799Possible SME tonearms including Ortofon VinylMaster Alpha cartridge:SME Series III (picture 12), exchangeable tonearm tube, eff. Mass approx. 5g: 690 SME 3009 improved (Figure 13), fixed headshell, eff. Mass 6.5g: 690SME 3009 S2 improved (picture 14), exchangeable headshell, eff. Mass 9.5g: 690Possible pickups for SME tonearms, MM systems including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata with boron stylus): 890Possible pickups for SME tonearms, MC systems including installation: AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of required components, new internal housing wiring (audio with sommer cable), new headshell cable, setting and adjustment of the various speeds, setting and adjustment of the suspension, checking and setting the tone arm and the pickup, careful cleaning and care of the entire record player, endurance test, acceptance and VDE safety test Stainless steel record weight: With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readj Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend

Restored Thorens TD 125 MKII Turntable Frame Elsbeere SME 3009 PossibleThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on eBay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 125 MKII with Thorens TP16 tonearm Various SME tonearms are optionally available20kg record playerFrame made of solid wild service wood, the rare beauty, with a very fine and slightly shimmering grain. It is one of the rarest and most valuable tree species in Germany. It can live up to 300 years and grow up to 30m tall. The wood of the service tree was voted the most beautiful wood in the world at the Paris World Exhibition. To this day, it is one of the finest woods and is highly valued by carpenters and wood turners, but also by musical instrument makers for its high resilience, elasticity and strength.Please note that wood is a natural product. The grain and color tone will always differ from the item photos.Item description:Pickup: Ortofon OM5EDevice feet: Spikes, height adjustableLimit switch: NoInner plate: metalSpindle: 10mmBasic dimensions: Width: 525mm, Depth: 413mm, Height 97mmThe following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of required components, new internal housing wiring (audio with sommer cable), new headshell cable, setting and adjustment of the various speeds, setting and adjustment of the suspension, checking and setting the tone arm and the pickup, careful cleaning and care of the entire record player, endurance test, acceptance and VDE safety test Housing: The case consists of 40mm solid Swiss pearwood side panels and a 16mm thick MDF base. The surface has been oiled and polished several times. On the back there is the connection panel for all necessary cables. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case bottom. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): approx. 6.3kgCartridge Ortofon OM5E: The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback.Audio cable: Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. Drive belt: The drive belt is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight: With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:Hood to place on the housing: 160Stainless steel feet (Picture 10 and 11), height adjustable, total weight 2520g, diameter 65mm, height 25mm: 90Possible pickups for tonearm TP16, MM systems including installation: AUDIO-TECHNICA VM 95ML (Microlinear): 179 AUDIO-TECHNICA VM 95SH (Shibata): 219AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (Special Line Contact): 699 Possible pickups for tonearm TP16, MC systems including installation: ORTOFON Quintet Red (elliptical): 349 ORTOFON Quintet Blue (elliptical, naked): 549 ORTOFON Quintet Bronze (Fineline): 749 ORTOFON Quinted Black (Shibata): 899 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799Possible SME tonearms including Ortofon VinylMaster Alpha cartridge:SME Series III (picture 12), exchangeable tonearm tube, eff. Mass approx. 5g: 690 SME 3009 improved (Figure 13), fixed headshell, eff. Mass 6.5g: 690SME 3009 S2 improved (picture 14), exchangeable headshell, eff. Mass 9.5g: 690Possible pickups for SME tonearms, MM systems including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata with boron stylus): 890Possible pickups for SME tonearms, MC systems including installation: AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Frame made of solid wild service wood, the rare beauty, with a very fine and slightly shimmering grain. It is one of the rarest and most valuable tree species in Germany. It can live up to 300 years and grow up to 30m tall. The wood of the service tree was voted the most beautiful wood in the world at the Paris World Exhibition. To this day, it is one of the finest woods and is highly valued by carpenters and wood turners, but also by musical instrument makers for its high resilience, elasticity and strength. The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of required components, new internal housing wiring (audio with sommer cable), new headshell cable, setting and adjustment of the various speeds, setting and adjust Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend

Restored Thorens TD 125 MKII turntable with SME 3009 pear wood frame The description of this item has been automatically translated. If you have any questions, please feel free to contact us. See also this products: Restored Thorens TD 125 MKII Turntable With Sme 3009 IN Pear Wood Restored Thorens TD 125 MKII Turntable Frame Elsberry Sme 3009 Possible Restored Thorens TD 125 MKII Turntable With Sme Tracking Arm 3009 Restored Thorens TD 125 MKII Turntable Also Sme 3009 Possible Restored Thorens TD 125 MKII Turntable Massive Frame Made From Pear Wood Restored Thorens TD 125 MKII Turntable Sme White/Marbled Restored Thorens TD 125 MKII Turntable Sme White/Orange Restored Thorens TD 125 MKII Turntable Sme White/Burgundy Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend

Système à cartouche MM comprenant linstallation : AUDIO-TECHNICA VM 740ML (Microlinéaire) : 339 AUDIO-TECHNICA VM 750 SH (Shibata) : 439 AUDIO-TECHNICA VM 760 SLC (ligne spéciale) : 699Ortofon 2M Rouge (elliptique) : 109Ortofon 2M Bleu (elliptique, nu) : 229Ortofon 2M Bronze (Fineline) : 390Ortofon 2M Noir (Shibata) : 599Ortofon 2M Black LVB 250 (Shibata avec cantilever en bore) : 899 Système MC à cartouche comprenant linstallation : ORTOFON Quintet Rouge (elliptique) : 330 ORTOFON Quintet Blue (elliptique, nu) : 470 ORTOFON Quintette Bronze (Fineline) : 660 ORTOFON Quinté Noir (Shibata) : 940 ORTOFON Cadenza Rouge (Fineline) : 1299 AUDIO-TECHNICA AT-OC9XEB (elliptique) : 279AUDIO-TECHNICA AT-OC9XEN (elliptique, nu) : 369 AUDIO-TECHNICA AT-33EV (elliptique) : 499AUDIO-TECHNICA AT-33PTG/II (microlinéaire) : 599AUDIO-TECHNICA AT-33SA (Shibata) : 799 Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. Le VM Alpha est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme. La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha, puis améliorer la qualité avec la fente daiguille appropriée en utilisant la fente daiguille immédiatement supérieure. Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécu

Restored Thorens TD 125 MKII turntable with SME 3009 in pear wood The description of this item has been automatically translated. If you have any questions, please feel free to contact us. See also this products: Restored Thorens TD 125 MKII Turntable With Sme 3009 Pear Wood Frame Restored Thorens TD 125 MKII Turntable With Sme Tracking Arm 3009 Restored Thorens TD 125 MKII Turntable Also Sme 3009 Possible Restored Thorens TD 125 MKII Turntable Frame Elsberry Sme 3009 Possible Restored Thorens TD160B Mkii Turntable IN Yellow Curry & Sme 3009 Restored Thorens TD 125 MKII Turntable Sme White/Marbled Restored Thorens TD 125 MKII Turntable Sme White/Orange Restored Thorens TD 125 MKII Turntable Sme White/Burgundy Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend

Desired Color! Restored Turntable Thorens TD 125 MKII Desired ColorThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)Individual production! Please note the processing time stated on EbayIndividual production! Please note the processing time specified on eBayYou can choose the color of the housing, top plate and tonearm base yourself.You can choose the color of the housing, the cover plate and the tonearm base yourself.RESTORED by ART-AND-SOUND Restored 125 MKII in your desired colorSolid version 19kgDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Revision workReplacing the electrolytic capacitors, trimmers and ICs on the motor boardCircuit board cleaned and contact tracks preservedAdjustment of the Vienna-Robinson oscillator for speeds 16, 33 and 45Power input board checkedCleaning of all componentsMotor and Camp CareReadjustment of subchassis and suspensionAdjustment of tonearm and pickupFunctional test and test run carried outVDE safety testItem description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmHousing:Painted in your desired color!The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Cover plate:Painted in your desired color!Tonearm base:Painted in your desired color! Pickup:An Ortofon Vinyl Master Alpha is installed. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a Super VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Device feet:Spikes made of chrome-plated stainless steel. So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: Cartridge MC System including installation: Height adjustable, total weight 670g, diameter 43mm, total height 20mmHeight adjustable, total weight 2520g, diameter 65mm, total height 28mm The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. An Ortofon Vinyl Master Alpha is installed. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particula Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland