Massive wooden case for Thorens TD 125 and 125 MKII turntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Casing made of solid wood, oiledfor Thorens TD125 and 125 MKII turntablesWhen installed, the record player closes approx. flush with the housing in the upper areaCase frame: 50.5cm x 41cm x 9.5cm / base: sturdy 14mm MDF board / weight: 4.5 kgOiled surfaceDevice feet to be placed underneath, hard foam (see photos)Visual condition: used, the outer frame is as good as new with no visual defectsCasing made of solid wood, oiled for Thorens TD125 and 125 MKII turntables When installed, the record player closes approx. flush with the housing in the upper area Case frame: 50.5cm x 41cm x 9.5cm / base: sturdy 14mm MDF board / weight: 4.5 kg Oiled surface Device feet to be placed underneath, hard foam (see photos) Visual condition: used, the outer frame is as good as new with no visual defects Herstellernummer nicht zutreffend Marke Markenlos Produktart Zarge Markenkompatibilität Thorens EAN Nicht zutreffend

Original Thorens Nf Cable Connection for Td 125 MkiiThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original Thorens NF cable connection for TD 125 MKII   Original Thorens NF cable connection for TD 125 MKII   Herstellernummer nicht zutreffend Marke Thorens Markenkompatibilität Thorens Produktart Gehäuse EAN Nicht zutreffend

Restored Thorens TD 125 MKII Turntable Sme White/MarbledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.RESTORED by ART-AND-SOUND Restored 125 MKII with SME 3009 tonearmDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmAudio and Power cables are firmly connected to the turntable. The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum painted black / gold, tonearm board / tonearm base newThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Original SME cableThe turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 112401191474The following parts are available as accessories and not included in this auction:Hood (to put on the housing):    German eBay-article number is 112401191474Cartridge MM systems including installation: Cartidge MC systems including installation:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strai Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Restored Thorens TD 125 MKII turntable SME white / orangeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.RESTORED by ART-AND-SOUND Restored 125 MKII with SME 3009 tonearmDesigner piece - design product - designer productOur record players are lovingly assembled, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality cases are restored or newly manufactured using skilled craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmAudio and. Power cables are permanently connected to the turntable. The housing:The housing consists of 40 mm MDF side panels and a 16 mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections.Faceplate:Cover plate made of 1mm aluminium metallic orange finish, tonearm board / tonearm base newThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The OM 10 is the entry-level model in the series and is a great entry-level system for mid-priced turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality by using the next available stylus insert.The audio cable:Original SME cableThe turntable:In five complex and time-consuming steps, the turntable is polished to a high gloss.The high gloss polish gives your record player a unique look.With surface sealing through a special protective coating, against repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:To decouple the record player from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system. following Parts are as Accessoriesör receiveältlich and not ingredient this auction:hood (to be placed on the frame): eBay-Article number 112401191474The following parts are available as accessories and not included in this auction:Hood (to put on the housing):    eBay-article number is 112401191474Cartridge MM systems including installation: Cartidge MC systems including installation:The housing consists of 40 mm MDF side panels and a 16 mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections. With the OM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The OM 10 is the entry-level model in the series and is a great entry-level system for mid-priced turntables. With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strai Antriebstyp Riemenantrieb Ausländisches Produkt Ja Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellernummer nicht zutreffend Modifizierter Artikel Ja Herstellungsland und -region Deutschland EAN Nicht zutreffend

Restored Thorens TD 125 MKII Turntable Frame Pearwood SME PossibleThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on eBay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 125 MKII with Thorens TP16 tonearm Various SME tonearms are optionally available20kg record playerFrame made of solid wild service wood, the rare beauty, with a very fine and slightly shimmering grain. It is one of the rarest and most valuable tree species in Germany. It can live up to 300 years and grow up to 30m tall. The wood of the service tree was voted the most beautiful wood in the world at the Paris World Exhibition. To this day, it is one of the finest woods and is highly valued by carpenters and wood turners, but also by musical instrument makers for its high resilience, elasticity and strength.Please note that wood is a natural product. The grain and color tone will always differ from the item photos.Item description:Pickup: Ortofon OM5EDevice feet: Spikes, height adjustableLimit switch: NoInner plate: metalSpindle: 10mmBasic dimensions: Width: 525mm, Depth: 413mm, Height 97mmThe following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of required components, new internal housing wiring (audio with sommer cable), new headshell cable, setting and adjustment of the various speeds, setting and adjustment of the suspension, checking and setting the tone arm and the pickup, careful cleaning and care of the entire record player, endurance test, acceptance and VDE safety test Housing: The case consists of 40mm solid Swiss pearwood side panels and a 16mm thick MDF base. The surface has been oiled and polished several times. On the back there is the connection panel for all necessary cables. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case bottom. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): approx. 6.3kgCartridge Ortofon OM5E: The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback.Audio cable: Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. Drive belt: The drive belt is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight: With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:Hood to place on the housing: 160Stainless steel feet (Picture 10 and 11), height adjustable, total weight 2520g, diameter 65mm, height 25mm: 90Possible pickups for tonearm TP16, MM systems including installation: AUDIO-TECHNICA VM 95ML (Microlinear): 179 AUDIO-TECHNICA VM 95SH (Shibata): 219AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (Special Line Contact): 699 Possible pickups for tonearm TP16, MC systems including installation: ORTOFON Quintet Red (elliptical): 349 ORTOFON Quintet Blue (elliptical, naked): 549 ORTOFON Quintet Bronze (Fineline): 749 ORTOFON Quinted Black (Shibata): 899 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799Possible SME tonearms including Ortofon VinylMaster Alpha cartridge:SME Series III (picture 12), exchangeable tonearm tube, eff. Mass approx. 5g: 690 SME 3009 improved (Figure 13), fixed headshell, eff. Mass 6.5g: 690SME 3009 S2 improved (picture 14), exchangeable headshell, eff. Mass 9.5g: 690Possible pickups for SME tonearms, MM systems including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata with boron stylus): 890Possible pickups for SME tonearms, MC systems including installation: AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Frame made of solid wild service wood, the rare beauty, with a very fine and slightly shimmering grain. It is one of the rarest and most valuable tree species in Germany. It can live up to 300 years and grow up to 30m tall. The wood of the service tree was voted the most beautiful wood in the world at the Paris World Exhibition. To this day, it is one of the finest woods and is highly valued by carpenters and wood turners, but also by musical instrument makers for its high resilience, elasticity and strength. The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of required components, new internal housing wiring (audio with sommer cable), new headshell cable, setting and adjustment of the various speeds, setting and adjust Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend

This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on eBay!Individual production! Please note the processing time specified on Ebay!You can find even more interesting offers and better prices. Take a look at... Art and Sound GermanyYou will find even more interesting offers and better prices at Art-and-Sound Germany Refurbished 125 MKII in solid pear wood frame oiled20kg record playerPlease note that wood is a natural product. The grain and color tone will always differ from the item photos.Our record players are lovingly assembled, restored and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality cases are restored or newly manufactured using skilled craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:      NoInner plate: metalSpindle: 10mmBasic dimensions:            Width: 525mm, Depth: 413mm, Height 97mThe following work will be carried out:Revision of electronic and mechanical componentsConversion or Components required for installationSetting and adjusting the different speedsSetting and adjusting the suspensionChecking and adjusting the tonearm and pickup Thorough cleaning of the entire record playerExecution of endurance testHousing:The case consists of 40mm solid pear wood side panels and a 16mm thick MDF base. The surface has been oiled and polished several times. On the back there is the connection panel for all necessary cables. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case bottom. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): 6.3 kgCartridge Ortofon OM5E (included):The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback.Audio cable:Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Painting work:The turntable, turntable rest and tonearm board are painted in Porsche Blue high gloss. Drive belt:The drive belt is manufactured according to the original Thorens specifications (same material and same dimensions).Plate weight:With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:The following parts are available as accessories and not included in this auction:Hood:for placing on the housing: 160 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron stylus): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799The case consists of 40mm solid pear wood side panels and a 16mm thick MDF base. The surface has been oiled and polished several times. On the back there is the connection panel for all necessary cables. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case bottom. The base is screwed to the frame and can be easily removed. Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. With a weight of 310g, it ensures th

Desired Color! Restored Turntable Thorens TD 125 MKII Desired ColorThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)Individual production! Please note the processing time stated on EbayIndividual production! Please note the processing time specified on eBayYou can choose the color of the housing, top plate and tonearm base yourself.You can choose the color of the housing, the cover plate and the tonearm base yourself.RESTORED by ART-AND-SOUND Restored 125 MKII in your desired colorSolid version 19kgDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Revision workReplacing the electrolytic capacitors, trimmers and ICs on the motor boardCircuit board cleaned and contact tracks preservedAdjustment of the Vienna-Robinson oscillator for speeds 16, 33 and 45Power input board checkedCleaning of all componentsMotor and Camp CareReadjustment of subchassis and suspensionAdjustment of tonearm and pickupFunctional test and test run carried outVDE safety testItem description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmHousing:Painted in your desired color!The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Cover plate:Painted in your desired color!Tonearm base:Painted in your desired color! Pickup:An Ortofon Vinyl Master Alpha is installed. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a Super VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Device feet:Spikes made of chrome-plated stainless steel. So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: Cartridge MC System including installation: Height adjustable, total weight 670g, diameter 43mm, total height 20mmHeight adjustable, total weight 2520g, diameter 65mm, total height 28mm The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. An Ortofon Vinyl Master Alpha is installed. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particula Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Restored Thorens TD 125 MKII Turntable Frame Pearwood SME PossibleThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on eBay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 125 MKII with Thorens TP16 tonearm Various SME tonearms are optionally available20kg record playerFrame made of solid wild service wood, the rare beauty, with a very fine and slightly shimmering grain. It is one of the rarest and most valuable tree species in Germany. It can live up to 300 years and grow up to 30m tall. The wood of the service tree was voted the most beautiful wood in the world at the Paris World Exhibition. To this day, it is one of the finest woods and is highly valued by carpenters and wood turners, but also by musical instrument makers for its high resilience, elasticity and strength.Please note that wood is a natural product. The grain and color tone will always differ from the item photos.Item description:Pickup: Ortofon OM5EDevice feet: Spikes, height adjustableLimit switch: NoInner plate: metalSpindle: 10mmBasic dimensions: Width: 525mm, Depth: 413mm, Height 97mmThe following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of required components, new internal housing wiring (audio with sommer cable), new headshell cable, setting and adjustment of the various speeds, setting and adjustment of the suspension, checking and setting the tone arm and the pickup, careful cleaning and care of the entire record player, endurance test, acceptance and VDE safety test Housing: The case consists of 40mm solid Swiss pearwood side panels and a 16mm thick MDF base. The surface has been oiled and polished several times. On the back there is the connection panel for all necessary cables. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case bottom. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): approx. 6.3kgCartridge Ortofon OM5E: The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback.Audio cable: Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. Drive belt: The drive belt is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight: With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:Hood to place on the housing: 160Stainless steel feet (Picture 10 and 11), height adjustable, total weight 2520g, diameter 65mm, height 25mm: 90Possible pickups for tonearm TP16, MM systems including installation: AUDIO-TECHNICA VM 95ML (Microlinear): 179 AUDIO-TECHNICA VM 95SH (Shibata): 219AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (Special Line Contact): 699 Possible pickups for tonearm TP16, MC systems including installation: ORTOFON Quintet Red (elliptical): 349 ORTOFON Quintet Blue (elliptical, naked): 549 ORTOFON Quintet Bronze (Fineline): 749 ORTOFON Quinted Black (Shibata): 899 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799Possible SME tonearms including Ortofon VinylMaster Alpha cartridge:SME Series III (picture 12), exchangeable tonearm tube, eff. Mass approx. 5g: 690 SME 3009 improved (Figure 13), fixed headshell, eff. Mass 6.5g: 690SME 3009 S2 improved (picture 14), exchangeable headshell, eff. Mass 9.5g: 690Possible pickups for SME tonearms, MM systems including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata with boron stylus): 890Possible pickups for SME tonearms, MC systems including installation: AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Frame made of solid wild service wood, the rare beauty, with a very fine and slightly shimmering grain. It is one of the rarest and most valuable tree species in Germany. It can live up to 300 years and grow up to 30m tall. The wood of the service tree was voted the most beautiful wood in the world at the Paris World Exhibition. To this day, it is one of the finest woods and is highly valued by carpenters and wood turners, but also by musical instrument makers for its high resilience, elasticity and strength. The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of required components, new internal housing wiring (audio with sommer cable), new headshell cable, setting and adjustment of the various speeds, setting and adjust Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend

This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on eBay!Individual production! Please note the processing time specified on Ebay!You can find even more interesting offers and better prices. Take a look at... Art and Sound Germany.You will find even more interesting offers and better prices at Art-and-Sound Germany. Revised 125 MKII in veneer frame burl wood high glossBlue or black birds eye veneer is also available as an option. The color of the cover plate can also be freely chosen.20kg record playerDANGER! The following change applies! The turntable platter is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!Please note that wood is a natural product. The grain and color tone will always differ slightly from the item photos.Our record players are lovingly assembled, restored and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality cases are restored or newly manufactured using skilled craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:      NoInner plate: metalSpindle: 10mmBasic dimensions:            Width: 525mm, Depth: 413mm, Height 97mDevice feet: spikesThe following work will be carried out:Revision of electronic and mechanical componentsConversion or Components required for installationSetting and adjusting the different speedsSetting and adjusting the suspensionChecking and adjusting the tonearm and pickup Thorough cleaning of the entire record playerExecution of endurance testHousing:The housing consists of 40 mm solid MDF side panels and a 16 mm thick base also made of MDF. The surface was veneered and finished several times with high-gloss varnish. On the back there is the connection panel for all necessary cables. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case bottom. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): 6.3 kgCartridge Ortofon OM5E (included):The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback.Audio cable:Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Turntable:The turntable is painted matt black. It gives your record player a lasting and subtle elegance. Drive belt:The drive belt is manufactured according to the original Thorens specifications (same material and same dimensions).following Parts are as Accessoriesör receiveältlich and not ingredient this auction:The following parts are available as accessories and not included in this auction:hood (for placing on the housing): 160Device feet XXL (height adjustable, weight 2520g, size 65mm x 26mm): 90 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron stylus): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799The housing consists of 40 mm solid MDF side panels and a 16 mm thick base also made of MDF. The surface was veneered and finished several times with high-gloss varnish. On the back there is the connection panel for all necessary cables. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case bottom. The base is screwed to the frame and can be easily removed. The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback. Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures tru

This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on eBay!Individual production! Please note the processing time specified on Ebay!Revised by ART-AND-SOUND Restored 125 MKII in orange / white paintAlso possible with various SME 3009 tonearms20kg record playerOur record players are lovingly assembled, restored and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality cases are restored or newly manufactured using skilled craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:      NoInner plate: metalSpindle: 10mmBasic dimensions:            Width: 525mm, Depth: 413mm, Height 97mThe following work will be carried out:Revision of electronic and mechanical componentsConversion or Components required for installationSetting and adjusting the different speedsSetting and adjusting the suspensionChecking and adjusting the tonearm and pickup Thorough cleaning of the entire record playerExecution of endurance testHousing:The housing consists of 40 mm MDF side panels and a 16 mm thick base also made of MDF. The surface was painted several times and then polished. On the back there is the connection panel for all necessary cables. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case bottom. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): 6.3 kgOrtofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The VM Alpha is the entry-level model in the series and is a great entry-level system for mid-priced turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next higher needle slot.Audio cable:Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Stainless steel record weight:With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system.Turntable:In five complex and time-consuming steps, the turntable is polished to a high gloss. The high gloss polish gives your record player a unique look. With surface sealing through a special protective coating, against repeated tarnishing and for a long-lasting shine. Drive belt:The drive belt is manufactured according to the original Thorens specifications (same material and same dimensions).following Parts are as Accessoriesör receiveältlich and not ingredient this auction:The following parts are available as accessories and not included in this auction:Hood:for placing on the housing: 160 Device feet XXL: 90Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2520g, diameter 65mm, height 26mmSME tonearms (the matching systems are selected according to the tonearms): SME Series III (replaceable tonearm tube, eff. Mass approx. 5g): 690 SME 3009 improved (fixed headshell, eff. Mass 6.5g): 690 SME 3009 S2 improved (replaceable headshell, eff. Mass 9.5g): 690 SME 3009 Series II (replaceable headshell, eff. Mass 12.5g): 790 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron stylus): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799With the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The VM Alpha is the entry-level model in the series and is a great entry-level system for mid-priced turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next higher needle slot. Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound wit

Plattenspieler läuft einwandfrei, hat altersbedingte Gebrauchspuren wie Kratzer in der Haube etc. Ausserdem hinten links einen Kleberfleck, wahrscheinlich entfernbar. Eine zweite Headshell, und Einstellschablone sind dabei Bitte nur Selbstabholer, Gerät ist so schwer dass Transportschäden vorprogrammiert wären. Privatverkauf ohne jegliche Gewährleistung

Original Tellermatte Mat Slipmate Edition Turntable Thorens Td 125 & MkiiThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original Thorens turntable matsuitable for Thorens TD125 and TD125 MKIIvery good, cleanedOriginal Thorens turntable mat suitable for Thorens TD125 and TD125 MKII very good, cleaned Marke Thorens EAN Nicht zutreffend Markenkompatibilität Thorens Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Produktart Tellermatte

Massive Wooden Casing Wood for Thorens Td 125 And 125 Mkii TurntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Housing made of solid wood, oiledfor Thorens TD125 and 125 MKII turntablesWhen installed, the record player closes approx. flush with the housing in the upper areaHousing frame: 50.5cm x 41cm x 9.5cm / Base: stable 14mm MDF board / Weight: 4.5 kgSurface oiledDevice feet for laying underneath, hard foam (see photos)optical condition: used, the outer frame is as good as new without optical defectsHousing made of solid wood, oiled for Thorens TD125 and 125 MKII turntables When installed, the record player closes approx. flush with the housing in the upper area Housing frame: 50.5cm x 41cm x 9.5cm / Base: stable 14mm MDF board / Weight: 4.5 kg Surface oiled Device feet for laying underneath, hard foam (see photos) optical condition: used, the outer frame is as good as new without optical defects Herstellernummer nicht zutreffend Marke Markenlos Markenkompatibilität Thorens Produktart Zarge EAN Nicht zutreffend

Restored Thorens TD 125 MKII Turntable Also Sme 3009 PossibleThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 125 MKII in flight green and stainless steelAlso possible with different SME 3009 tonearms20kg turntableOur record players are lovingly put together, restored and assembled by hand. Each of them is unique and differs in model, color, veneer grain or other details. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:      NoInner plate: metalSpindle: 10mmBasic dimensions:            Width: 525mm, depth: 413mm, height 97mThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of endurance testHousing:The housing consists of 40mm MDF side panels and a 16mm thick base, also made of MDF. The surface was painted several times and then polished. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): 6.3 kgOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. Drive belt:The drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood:for placing on the housing: 160 Device feet XXL: 90Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2520g, diameter 65mm, height 26mmSME tonearms (the matching systems are selected according to the tonearms): SME Series III (replaceable tonearm tube, eff. Mass approx. 5g): 690 SME 3009 improved (fixed headshell, eff. Mass 6.5g): 690 SME 3009 S2 improved (replaceable headshell, eff. Mass 9.5g): 690 SME 3009 Series II (replaceable headshell, eff. Mass 12.5g): 790 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799Our record players are lovingly put together, restored and assembled by hand. Each of them is unique and differs in model, color, veneer grain or other details. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g Antriebstyp Riemenantrieb Marke Thorens EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable Massive oak Wood Frame OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD 125 MKII Turntable Sme White/MarbledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.RESTORED by ART-AND-SOUND Restored 125 MKII with SME 3009 tonearmDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmAudio and Power cables are firmly connected to the turntable. The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum painted black / gold, tonearm board / tonearm base newThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Original SME cableThe turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 112401191474The following parts are available as accessories and not included in this auction:Hood (to put on the housing):    German eBay-article number is 112401191474Cartridge MM systems including installation: Cartidge MC systems including installation:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strai Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Desired Color! Revised Thorens TD 125 MKII Turntable Sme 3009 Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing, top plate and tonearm base yourself.You can choose the color of the housing, the cover plate and the tonearm base yourself.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:Painted in your desired color!The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Cover plate:The cover plate is painted in your desired color!Tonearm base:The tonearm base is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented.XL (see pictures 11 and 12): 84XXL (see pictures 9 and 10): 130Cartridge MM system including installation: Ortofon VinylMaster Red (naked elliptical cut):             220Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut):        470 Ortofon 2MRed (elliptical):             99Ortofon 2M Blue (diamond cut):   220Ortofon 2M Bronze (fineline diamond cut): 390 Ortofon 2M Black (Shibata diamond cut):         599 Ortofon 2M Black LVB 250 (Shibata diamond cut):              945audio-technica VM740ML Dual MM (Microlinear Needle):        339audio-technica VM750SH Dual MM (Shibata needle):                439 audio-technica VM760SLC Dual MM (Special Line Contact):  699Cartridge MC System including installation: audio-technica AT-OC9XML Dual MC (Microlinear Needle):    599 audio-technica AT-OC9XSH Dual MC (Shibata needle grind):  699 audio-technica AT-OC9XSLDual MC (Special Line Contact): 799The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxy Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Restored Thorens TD 125 MKII Turntable Sme White/OrangeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.RESTORED by ART-AND-SOUND Restored 125 MKII with SME 3009 tonearmDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmAudio and Power cables are firmly connected to the turntable. The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum metallic orange paint, tonearm board / tonearm base newThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Original SME cableThe turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 112401191474The following parts are available as accessories and not included in this auction:Hood (to put on the housing):    German eBay-article number is 112401191474Cartridge MM systems including installation: Cartidge MC systems including installation:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strai Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable oak Wood Rustic OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound Tonumfang +/- 16 % EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable Massives Ash Wood High GlossThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable Solid Ash Wood Frame OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound Tonumfang +/- 16 % EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable Nussbaumholz Frame OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound Tonumfang +/- 16 % EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Restored Thorens TD 125 MKII Turntable With Sme Tracking Arm 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.RESTORED and MODIFIED by ART-AND-SOUND Restored 125 MKII with SME 3009 tonearmDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmAudio and Power cables are firmly connected to the turntable. The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm gold anodized aluminumThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Original SME cableThe turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 112401191474The following parts are available as accessories and not included in this auction:Hood (to put on the housing):    German eBay-article number is 112401191474Cartridge MM systems including installation: Cartidge MC systems including installation:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strai Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Restored Thorens TD 125 MKII Turntable With Sme 3009 Birnenholz OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on eBay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Refurbished 125 MKII with SME 3009 in solid pear wood frame oiled20kg record playerPlease note that wood is a natural product. The grain and color will always differ from the item photos.Our record players are lovingly assembled, restored and mounted by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Pickup:         Ortofon VinylMaster Alpha (not as shown)Device feet: Stainless steel, height adjustable, 65mm x 25mm, total weight 2.5kgLift control:          Frontal on the control panel and on the tonearmLimit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsConversion or Components required for installationSetting and adjusting the different speedsSetting and adjusting the suspensionChecking and adjusting the tonearm and pickup Thorough cleaning of the entire record playerExecution of an endurance testHousing:The housing consists of 40mm solid pear wood side panels and a 16mm thick MDF base. The surface has been oiled and polished several times. On the back there is the connection panel for all necessary cables. Four height-adjustable stainless steel device feet are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): approx. 6.3kgOrtofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry-level model in the series and is a great entry-level system for mid-priced turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and subtle elegance. Drive belt:The drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system. --The following Parts are as Accessoriesör receiveältlich and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Cartridge MM system including installation:Ortofon VM Red (elliptical, naked): 199Ortofon VM Silver (Fritz Gyger 70 cut): 399Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked):229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron stylus): 899 AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO TECHNICA VM 760 SLC (special line contact cut): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799With the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry-level model in the series and is a great entry-level system for mid-priced turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next higher needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with Ausländisches Produkt Ja Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Modifizierter Artikel Ja Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend