Restored Turntable Thorens Td 320 Mkiii Bicolor Black - GoldThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!Information:In order to ensure an optimal basic setting of the record player, the record weight is omitted. The plate weight is not part of the offer.In order to ensure an optimal basic setting of the turntable, the record weight is omitted. The plate weight is not part of the offer.RESTORED by ART-AND-SOUND Restored THORENS TD320 MKIII in black and gold metallicOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:      YesInner plate: metalSpindle: 7mm Basic dimensions:            Width: 44cm, depth: 34cm, height approx. 15cmHousing:Original case professionally painted.Tonearm base goldPlate base black high glossGold underbodyPlate support and decorative cap goldIt is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection terminal for all required cable connections is located on the back.New Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.New audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Turntable feet:Four height-adjustable spikes (chrome-plated).Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).OPTIONAL:Your record player comes with a good entry-level Ortofon VinylMaster Alpha (MM system) cartridge.For more listening pleasure, we can offer you various upgrades including installation.Your turntable comes with a good entry-level Ortofon VinylMaster Alpha (MM-System) cartridge.For more listening pleasure, we can offer you various upgrades including installation. Normal 0 21 false false false DE X-NONE X-NONE Pickups from Ortofon, audio-technica or GradoHoodsSME tonearms (also with limit switch)With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has Herstellernummer nicht zutreffend Antriebsart Riemenantrieb Modell TD320 MKII EAN Nicht zutreffend Marke Thorens - restauriert von art-and-sound

Dieser audiophile Plattenspieler von Thorens ist ein Juwel für Hi-Fi-Enthusiasten. Das Modell TD 125 zeichnet sich durch den Riemenantrieb aus und wird mit dem SME 3009 Tonarm und ohne Tonabnehmer geliefert. Mit Abspielgeschwindigkeiten von 45 RPM, 33,3 RPM und 78 RPM ist dieser Plattenspieler perfekt für jeden Musikliebhaber. Seine klassische Echtholzzarge verleiht ihm einen nostalgischen Charme und fügt sich perfekt in jedes Heim-Audio-Setup ein.Das Abtastsystem kann mit einem Aufpreis von 300,-€ dazu erworben werden.Abholung und Probehören erwünscht, Versand zum Risiko des Käufers möglich. Da es sich um einen Privatverkauf handelt, erfolgt dieser unter Ausschluss jeglicher Gewährleistung und Sachmängelhaftung. Die Haftung auf Schadenersatz wegen Verletzung von Gesundheit, Körper oder Leben und grob fahrlässiger und/oder vorsätzlicher Verletzungen meiner Pflichten als Privatverkäufer bleiben davon unberührt!

Restored Turntable Thorens TD 320 Black Gold Silver Also With SmeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD-320 black, orange metallic and silverHigh gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      YesInner plate: metalSpindle: 10mm Basic dimensions:            Width: 44cm, depth: 34cm, height approx. 15cmHousing:The original housing is refurbished and painted in two colors.Tonearm base orange metallicPlate base black high glossOrange metallic underbodyDecorative cap and turntable support orange metallicSpikes, control panel, switch, single puck and puck holder in silverThe surface is covered with several layers of colored varnish applied with appropriate intermediate sanding, sealed with high-gloss varnish and then polished. The connections for all required cable connections are located on the back.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by using the next higher needle slot with the appropriate needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented.The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following work will be carried out:Um-or Installation of required components, revision of various electronic and mechanical components, adjustment and adjustment of the speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and cartridge, thorough cleaning of the entire record player, final acceptance and endurance test.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood including hinges: 190Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799SME tonearm including installation:SME 3009: 599SME 3009 III: 599With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by using the next higher needle slot with the appropriate needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Antriebsart Riemenantrieb Farbe schwarz - gold metallic - silber Modell TD 320 Herstellernummer nicht zutreffend

Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD-320 black, orange metallic and silverHigh gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      YesInner plate: metalSpindle: 10mm Basic dimensions:            Width: 44cm, depth: 34cm, height approx. 15cmHousing:The original housing is refurbished and painted in two colors.Tonearm base orange metallicPlate base black high glossOrange metallic underbodyDecorative cap and turntable support orange metallicSpikes, control panel, switch, single puck and puck holder in silverThe surface is covered with several layers of colored varnish applied with appropriate intermediate sanding, sealed with high-gloss varnish and then polished. The connections for all required cable connections are located on the back.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by using the next higher needle slot with the appropriate needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented.The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following work will be carried out:Um-or Installation of required components, revision of various electronic and mechanical components, adjustment and adjustment of the speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and cartridge, thorough cleaning of the entire record player, final acceptance and endurance test.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood including hinges: 190Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799SME tonearm including installation:SME 3009: 599SME 3009 III: 599With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by using the next higher needle slot with the appropriate needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has

This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!Information:In order to ensure an optimal basic setting of the record player, the record weight is omitted. The plate weight is not part of the offer.In order to ensure an optimal basic setting of the turntable, the record weight is omitted. The plate weight is not part of the offer.RESTORED by ART-AND-SOUND Restored THORENS TD320 MKIII in black and gold metallicOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:      YesInner plate: metalSpindle: 7mm Basic dimensions:            Width: 44cm, depth: 34cm, height approx. 15cmHousing:Original case professionally painted.Tonearm base goldPlate base black high glossGold underbodyPlate support and decorative cap goldIt is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection terminal for all required cable connections is located on the back.New Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.New audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Turntable feet:Four height-adjustable spikes (chrome-plated).Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).OPTIONAL:Your record player comes with a good entry-level Ortofon VinylMaster Alpha (MM system) cartridge.For more listening pleasure, we can offer you various upgrades including installation.Your turntable comes with a good entry-level Ortofon VinylMaster Alpha (MM-System) cartridge.For more listening pleasure, we can offer you various upgrades including installation. Normal 0 21 false false false DE X-NONE X-NONE Pickups from Ortofon, audio-technica or GradoHoodsSME tonearms (also with limit switch)With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has

RESTORED and MODIFIED by ART-AND-SOUND Restored 145 in gold metallicDesigner piece - design product - designer productWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with metallic paint in gold metallicThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.Precision turned aluminum pulley:4 running grooves ensure a smooth change in speed (less strain on the motor and belt)Optimization of the input angle enables a quick change of speedUpper and lower limits prevent the belt from coming off The audio cable:Branded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Tonkopft pickup cableThe high-quality headshell cable with its 24 kt. Gold-plated cable lugs create the optimal connection between pickup and tonearm. New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): eBay-item number 112401191474Hood big (for placing on the substructure):    eBay-item number 112411582098The following parts are available as accessories and not included in this auction:Hood small (to put on the housing):    German eBay-article number is 112401191474Hood large (to put on the base):            German eBay-article number is 112411582098Tonearm SME 3009 Series III gold (used, as good as new):  When installing an SME tonearm, the limit switch does not function.Cartridge MM systems including installation: Cartidge MC systems including installation:Branded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your

Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/240V or 110V/120V (for example USA and world wide) Restored 160 Gold MetallicHigh gloss finishAlso possible with SME tonearmOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            metalPlate bearing:            10mmBasic dimensions:          Width: 54cm, depth: 45cm, height 15cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, surface gold metallicOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Audio RCA cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.  Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. It builds up just enough pressure to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Dust cover:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 499 ORTOFON Quintet Bronze (Fineline): 699 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (we offer the appropriate pickups on request): SME 3009 improved: 690 SME 3009 S2 improved: 690 SME Series III: 690With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a

Restored Thorens TD 320 Bicolor Black - Gold MetallicThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!We would also be happy to restore your Thorens to this look.RESTORED by ART-AND-SOUND Restored THORENS TD320 in black and gold metallicOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work. Item description:Limit switch:    YesInner plate:             metalSpindle:                   10mm Basic dimensions:            Width: 44cm, depth: 34cm, height approx. 15cmHousing:Original case professionally painted.Tonearm base in gold metallicPlate base in high-gloss blackUnderbody in gold metallicIt is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection terminal for all required cable connections is located on the back.Ortofon VinylMaster Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Device feet:Four height-adjustable stainless steel spikesl.Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:New hood incl. Hinge (new dust cover including hinge):  190Cartridge MM system including installation:Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 199 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata diamond cut): 590 Ortofon 2M Black LVB 250 (Shibata diamond cut): 899Audio-Technica VM740ML Dual MM (Microlinear): 339Audio-Technica VM750SH Dual MM (Shibata): 439 Audio-Technica VM760SLC Dual MM (Special Line Contact): 699Cartridge MC System including installation: Audio-Technica AT-OC9XML Dual MC (Microlinear): 599Audio-Technica AT-OC9XSH Dual MC (Shibata): 699Audio-Technica AT-OC9XSL Dual MC (Special Line Contact): 799With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound perform Herstellernummer nicht zutreffend Antriebsart Riemenantrieb Modell TD 320 EAN Nicht zutreffend Marke Thorens - restauriert von art-and-sound

Restored Thorens TD 160 Turntable Carbon Look Gold-BrownThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It has been professionally finished with multiple coats of high gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), th Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Antriebstyp Riemenantrieb Modell TD 160

This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan) Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! Bei Selbstabholung 70,00 € Rabatt!Gerne restaurieren wir auch Ihren Thorens in dieser Optik. RESTAURIERT von ART-AND-SOUND Restaurierter THORENS TD320 in schwarz und gold metallic Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt und montiert. Jeder von ihnen ist ein Unikat und unterscheidet sich in Modell, Farbe, Furnier-maserung.Die hochwertigen Gehäuse werden in qualifizierter Handwerksarbeit restauriert oder neu angefertigt.Elektrische Bauteile werden überpüft, beweglichen Teile geölt und Verschleißteile ausgetauscht.Einen abschließender Dauerlauftest runden die aufwendigen Arbeiten ab. Artikelbeschreibung: Endabschaltung: Ja Innenteller: MetallSpindel: 10 mm Grundmaße: Breite: 44cm, Tiefe: 34cm, Höhe ca.15cm Gehäuse: Originales Gehäuse professionell lackiert.Tonarmbasis in gold metallic Tellerbasis in schwarz hochglanz Unterboden in gold metallic Es ist sehr aufwendig mit mehreren Lagen Hochglanzlack bei entsprechenden Zwischenschliffen versiegelt und poliert. Auf der Rückseite befindet sich das Anschlußterminal für alle benötigten Kabelverbindungen. Tonabnehmer Ortofon VinylMaster Alpha (inklusive):Mit der VM-Serie hat Ortofon seit langem die Referenz MM-Tonabnehmer geschaffen, die lange Produktionszeit und der charakteristische Nadelkorpus sind auf der ganzen Welt ein Begriff. Das VM Alpha ist der Einstieg in die Serie und ist ein Super Einstiegssystem für Plattenspieler der mittleren Preislage. Die VM Reihe von Ortofon ist untereinander kompatibel. Sie können also mit einem VM Alpha starten und dann mit dem passenden Nadeleinschub die Qualität verbessern, indem Sie den nächsthörern Nadeleischub verwenden.Audiokabel: Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Plattenteller: In fünf aufwendigen und zeitintensiven Arbeitsschritten, wird der Plattenteller auf Hochglanz poliert. Die Hochglanzpolitur verleit Ihrem Plattenspieler ein einzigartiges Aussehen. Mit Oberflächenversiegelung durch eine spezielle Schutzlackierung, gegen wiederholtes Anlaufen und für einen langanhaltenden Glanz. Gerätefüße:Vier höhenverstellbare Spikes aus Edelstahl.Antriebsriemen:Dieser Antriebsriemen wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt.Schallplattengewicht aus Edelstahl:Mit einem Gewicht von 310g sorgt es dafür, dass die Schallplatte glatt auf dem Teller aufliegt und ruhig durchläuft. Dieses Schallplattengewicht spielt in der mittleren Gewichtsklasse. Es baut gerade soviel Gewicht auf, die Schwingungen der Platte zu dämpfen ohne die Lagerbuchsen zu beanspruchen. Die Federung des Thorens-Subchassis wurde entsprechend neu eingestellt. Durch seinen Einsatz erhöhen Sie die Klangleistung Ihrer Anlage. Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion:The following parts are available as accessories and not included in this auction: Neue Haube inkl. Scharnier (new dust cover including hinge): 190 Cartridge MM System including installation: Ortofon 2M Red (elliptisch): 99 Ortofon 2M Blue (elliptisch, nackt): 199 Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata-Diamantschliff): 590 Ortofon 2M Black LVB 250 (Shibata-Diamantschliff): 899Audio-Technica VM740ML Dual MM (Microlinear): 339 Audio-Technica VM750SH Dual MM (Shibata): 439 Audio-Technica VM760SLC Dual MM (Special-Line-Contact): 699 Cartridge MC System including installation: Audio-Technica AT-OC9XML Dual MC (Microlinear): 599 Audio-Technica AT-OC9XSH Dual MC (Shibata): 699 Audio-Technica AT-OC9XSL Dual MC (Special-Line-Contact): 799

Bei Selbstabholung 70,00 € Rabatt! RESTAURIERT und MODIFIZIERT von ART-AND-SOUND Restaurierter THORENS TD 145 in gold metallic Designerstück - design product - ???????????? ??????? MIT EINEM KAMPFGEWICHT VON ÜBER 10 KG !!! Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt, modifiziert und montiert. Jeder von ihnen ist ein Unikat und unterscheidet sich in Modell, Farbe, Furnier-maserung oder anderen Details. Die hochwertigen Gehäuse werden in qualifizierter Handwerksarbeit restauriert oder neu angefertigt.Elektrische Bauteile werden überpüft, beweglichen Teile geölt und Verschleißteile ausgetauscht.Einen abschließender Dauerlauftest runden die aufwendigen Arbeiten ab.Der Kunde erhält ein Gerät der Spitzenklasse. The phonograph works with 220V/50Hz. For shipping to the USA the turntable is converted on 110V/60Hz . Artikelbeschreibung: Endabschaltung: Ja Innenteller: MetallLagerdorn: 10mm Grundmaße: Breite: 45cm, Tiefe: 36cm, Höhe ca.18cm Das Gehäuse: Das Gehäuse besteht aus 25mm-MDF-Seitenteilen und einem 16 mm starken Boden gleichen Materials. Es ist sehr aufwendig mit mehreren Lagen metallic Lack bei entsprechenden Zwischenschliffen versiegelt und poliert. An der Rückseite befindet sich das Anschlusspanel für alle benötigten Kabelverbindungen. Faceplate: Deckplatte aus 1mm Aluminium mit metallic Lackierung in gold metallic Der Tonabnehmer Ortofon OM10:Mit der OM-Serie hat Ortofon seit langem die Referenz MM-Tonabnehmer geschaffen, die lange Produktionszeit und der charakteristische Nadelkorpus sind auf der ganzen Welt ein Begriff. Das OM 10 ist der Einstieg in die Serie und ist ein Super Einstiegssystem für Plattenspieler der mittleren Preislage.Die OM Reihe von Ortofon ist untereinander kompatibel. Sie können also mit einem OM 10 starten und dann mit dem passenden Nadeleinschub die Qualität verbessern, indem Sie den nächsthörern Nadeleischub verwenden. Präzisionsgedrehtes Alu Pulley:4 Laufrillen sorgen für einen flüssigen Wechsel der Drehzahl (weniger Belastung auf Motor und Riemen)Optimierung des Eingangswinkels ermöglicht einen schnellen Wechsel der GeschwindigkeitObere und untere Begrenzung verhindert das Abspringen des Riemens Das Audiokabel: Markenkabel von Oehlbach. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Der Plattenteller: In fünf aufwendigen und zeitintensiven Arbeitsschritten, wird der Plattenteller auf Hochglanz poliert. Die Hochglanzpolitur verleit Ihrem Plattenspieler ein einzigartiges Aussehen. Mit Oberflächenversiegelung durch eine spezielle Schutzlackierung, gegen wiederholtes Anlaufen und für einen langanhaltenden Glanz. Spikes aus verchromten Edelstahl: Damit der Plattenspieler von niederfrequenten Schwingungen entkoppelt wird, ist das Chassis mit höhenverstellbaren Spikes ausgestattet. Resonanzen und Rückkopplungen werden somit effektiv verhindert. Der Antriebsriemen:Der Antriebsriemen ist neu. Er wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. Tonkopft Tonabnehmer KabelDas hochwertige Headshell-Kabel mit seinen 24 Kt. vergoldeten Kabelschuhen stellt die optimale Verbindung zwischen Tonabnehmer und Tonarm her. Neues Schallplattengewicht aus Edelstahl:Mit einem Gewicht von 310g sorgt es dafür, dass die Schallplatte glatt auf dem Teller aufliegt und ruhig durchläuft. Dieses Schallplattengewicht spielt in der mittleren Gewichtsklasse. Es baut gerade soviel Gewicht auf, die Schwingungen der Platte zu dämpfen ohne die Lagerbuchsen zu beanspruchen. Die Federung des Thorens-Subchassis wurde entsprechend neu eingestellt. Durch seinen Einsatz erhöhen Sie die Klangleistung Ihrer Anlage. -------------------------------------------------------------------------------------------------------- Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion: Haube klein (zum Aufsetzen auf die Zarge): eBay-Artikelnummer 112401191474Haube groß (zum Aufsetzen auf den Unterbau): eBay-Artikelnummer 112411582098 The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): german eBay-article number is 112401191474Hood large (to put on the base): german eBay-article number is 112411582098 Tonarm SME 3009 Series III gold (gebraucht, neuwertig): 490€ Bei der Installation eines SME Tonarmes ist die Endabschaltung ohne Funktion. Cartridge MM systems including installation: Ortofon 2M Red (elliptisch): UVP 90 € Ortofon 2M Blue (elliptisch, nackt): UVP 190 € Ortofon 2M Bronze (fine line): UVP 330 € Ortofon Super OM 10 (elliptisch): UVP 70 € Ortofon Super OM 20 (elliptisch): UVP 190 € Ortofon Super OM 30 (fine line): UVP 280 € Ortofon Super OM 40 (Fritz Gyger): UVP 360 € Ortofon Vinyl Master Red (elliptisch): UVP 195 € Ortofon Vinyl Master Blue (fine line): UVP 285 € Ortofon Vinyl Master Silver (Fritz Gyger): UVP 365 € Cartidge MC systems including installation: Ortofon MC 1 Turbo: UVP 190 € Ortofon MC 3 Turbo: UVP 350 €

This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan) Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! Information:Um eine optimale Grundeinstellung des Plattenspielers zu gewährleisten, wird auf das Plattengewicht verzichtet. Das Plattengewicht ist nicht Bestandteil des Angebotes.In order to ensure an optimal basic setting of the turntable, the record weight is omitted. The plate weight is not part of the offer. Bei Selbstabholung 70,00 € Rabatt! RESTAURIERT von ART-AND-SOUND Restaurierter THORENS TD320 MKIII in schwarz und gold metallic Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt, modifiziert und montiert. Jeder von ihnen ist ein Unikat und unterscheidet sich in Modell, Farbe, Furnier-maserung.Die hochwertigen Gehäuse werden in qualifizierter Handwerksarbeit restauriert oder neu angefertigt.Elektrische Bauteile werden überpüft, beweglichen Teile geölt und Verschleißteile ausgetauscht.Einen abschließender Dauerlauftest runden die aufwendigen Arbeiten ab.Der Kunde erhält ein Gerät der Spitzenklasse. Artikelbeschreibung: Endabschaltung: Ja Innenteller: MetallSpindel: 7 mm Grundmaße: Breite: 44cm, Tiefe: 34cm, Höhe ca.15cm Gehäuse: Originales Gehäuse professionell lackiert.Tonarmbasis Gold Tellerbasis Schwarz Hochglanz Unterboden Gold Plattenauflage und Dekokappe Gold Es ist sehr aufwendig mit mehreren Lagen Hochglanzlack bei entsprechenden Zwischenschliffen versiegelt und poliert. Auf der Rückseite befindet sich das Anschlußterminal für alle benötigten Kabelverbindungen.Neuer Tonabnehmer Ortofon VM Alpha (inklusive):Mit der VM-Serie hat Ortofon seit langem die Referenz MM-Tonabnehmer geschaffen, die lange Produktionszeit und der charakteristische Nadelkorpus sind auf der ganzen Welt ein Begriff. Das VM Alpha ist der Einstieg in die Serie und ist ein Super Einstiegssystem für Plattenspieler der mittleren Preislage.Die VM Reihe von Ortofon ist untereinander kompatibel. Sie können also mit einem VM Alpha starten und dann mit dem passenden Nadeleinschub die Qualität verbessern, indem Sie den nächst höheren Nadeleischub verwenden. Neues Audiokabel: Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Der Plattenteller: In fünf aufwendigen und zeitintensiven Arbeitsschritten, wird der Plattenteller auf Hochglanz poliert. Die Hochglanzpolitur verleit Ihrem Plattenspieler ein einzigartiges Aussehen.Mit Oberflächenversiegelung durch eine spezielle Schutzlackierung, gegen wiederholtes Anlaufen und für einen langanhaltenden Glanz. Plattenspielerfüße:Vier höhenverstellbare Spikes (verchromt). Antriebsriemen: Dieser Antriebsriemen wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. OPTIONAL:Ihr Plattenspieler wird mit einem guten Einsteiger-Tonabnehmer Ortofon VinylMaster Alpha (MM-System) geliefert. Für mehr Hörgenuss können wir Ihnen verschiedene Upgrades inklusive Installation anbieten. Your turntable comes with a good entry-level Ortofon VinylMaster Alpha (MM-System) cartridge.For more listening pleasure, we can offer you various upgrades including installation. Normal 0 21 false false false DE X-NONE X-NONE Tonabnehmer von Ortofon, audio-technica oder Grado Hauben SME Tonarme (auch mit Endabschaltung)

Restored Turntable Thorens TD 320 Black Gold Silver Also With SmeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time specified on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD-320 black, orange metallic and silverhigh gloss finishAlso possible with different SME tonearms.Our turntables are lovingly assembled, modified and assembled by hand. Each of them is unique and differs in model, colour, veneer grain. The high-quality cases are restored or newly manufactured in qualified craftsmanship. Electrical components are checked, moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The customer receives a top-class device.Item description:limit switch:      Yesinner plate: metalSpindle: 10mm basic dimensions:            Width: 44cm, depth: 34cm, height ca.15cmHousing:The original housing is refurbished and painted in two colors.Tonearm base orange metallicPlate base black high glossUnderbody orange metallicDecorative cap and turntable cover orange metallicSpikes, control bar, switch, single puck and puck holder in silverThe surface is covered with several layers of colored lacquer applied with appropriate intermediate sanding, sealed with high-gloss varnish and then polished. The connections for all required cable connections are located on the back.Pickup Ortofon VM Alpha (included):With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then, with the appropriate needle slot, improve the quality by using the next higher needle slot.Audio cable:brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Turntable:The turntable is made in five laborious and time-consuming steps polished to a high gloss.The mirror finish gives your turntable a unique look. With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine.Chromed stainless steel spikes:So that the turntable is decoupled from low-frequency vibrations, the chassis is equipped with height-adjustable spikes. Resonance and feedback are thus effectively prevented.The drive belt:The drive belt is new. It is manufactured to the original Thorens specifications (same material and dimensions).The following work is carried out:order or Installation of required components, revision of various electronic and mechanical components, adjustment and adjustment of the speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and cartridge, thorough cleaning of the entire turntable, final inspection and endurance test.The following parts are as accessoriesuhright riseetcdaily and Not component this auction:the following parts are available like accessories other not included in this auction: Hood including hinges: 190Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, nude): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799SME tonearm including installation:SME 3009: 599SME 3009 III: 599With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then, with the appropriate needle slot, improve the quality by using the next higher needle slot. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cWith the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then, with the appropriate needle slot, improve the quality by using the next higher needle slot. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The c Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Antriebsart Riemenantrieb Farbe schwarz - gold metallic - silber Modell TD 320 Herstellernummer nicht zutreffend

Individual production! Please note the processing time specified on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD-320 black, orange metallic and silverhigh gloss finishAlso possible with different SME tonearms.Our turntables are lovingly assembled, modified and assembled by hand. Each of them is unique and differs in model, colour, veneer grain. The high-quality cases are restored or newly manufactured in qualified craftsmanship. Electrical components are checked, moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The customer receives a top-class device.Item description:limit switch:      Yesinner plate: metalSpindle: 10mm basic dimensions:            Width: 44cm, depth: 34cm, height ca.15cmHousing:The original housing is refurbished and painted in two colors.Tonearm base orange metallicPlate base black high glossUnderbody orange metallicDecorative cap and turntable cover orange metallicSpikes, control bar, switch, single puck and puck holder in silverThe surface is covered with several layers of colored lacquer applied with appropriate intermediate sanding, sealed with high-gloss varnish and then polished. The connections for all required cable connections are located on the back.Pickup Ortofon VM Alpha (included):With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then, with the appropriate needle slot, improve the quality by using the next higher needle slot.Audio cable:brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Turntable:The turntable is made in five laborious and time-consuming steps polished to a high gloss.The mirror finish gives your turntable a unique look. With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine.Chromed stainless steel spikes:So that the turntable is decoupled from low-frequency vibrations, the chassis is equipped with height-adjustable spikes. Resonance and feedback are thus effectively prevented.The drive belt:The drive belt is new. It is manufactured to the original Thorens specifications (same material and dimensions).The following work is carried out:order or Installation of required components, revision of various electronic and mechanical components, adjustment and adjustment of the speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and cartridge, thorough cleaning of the entire turntable, final inspection and endurance test.The following parts are as accessoriesuhright riseetcdaily and Not component this auction:the following parts are available like accessories other not included in this auction: Hood including hinges: 190Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, nude): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799SME tonearm including installation:SME 3009: 599SME 3009 III: 599With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then, with the appropriate needle slot, improve the quality by using the next higher needle slot. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cWith the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then, with the appropriate needle slot, improve the quality by using the next higher needle slot. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The c

HERKUNFT: Beifang eines Plattenspielerkaufs. ZUSTAND: Funktion ist einwandfrei. Unter dem Mikroskop zeigen sich kaum erkennbare Verschleißspuren (< 25 %). LIEFERUMFANG: Originalverpackung, Nadelschutz, Bedienungsanleitung, Inbus-Schlüssel, 4 Schrauben. Der teilweise abgebildete Plattenspieler ist nicht Teil des Lieferumfangs und steht auch nicht zum Verkauf. BESONDERHEITEN: Das Tonabnehmergehäuse hat Gewinde zur vereinfachten Montage. Durch Nadeltausch upgradefähig auf G-2300, G-2400 oder G-2500. ÜBERGABE: Abholung oder Versand auf Risiko des Käufers mit DHL für 5,50 € je Sendung möglich. GARANTIE: Bilder sind Teil der Beschreibung. Als Privatanbieter kann ich keine Gewährleistung, Minderung oder Umtausch anbieten. Interessierte können sich vor Kauf das Angebot ansehen und gegebenenfalls testen. BEACHTEN SIE AUCH MEINE WEITEREN ANGEBOTE !

PROFESSIONAL ADJUSTABLE METAL FEET FOR TURNTABLES EMT, TECHNICS, GOLDRING, LINN, PIONEER, SONY Each adjustable foot has a rubber base and measures 4cm in diameter Extremely high stability for accurate turntable tracking. ------------------------------ Thanks for looking.

Beautiful Thorens TD 160 MkII Gold Platter Edition Very Rare Turntable, Custom, LINN LP12 Tonearm , one of a kind ! Beautiful Finish ! Outstanding Pressentation, Looks Brand New ! Audiophile Quaility Turntable ! Ready for a New Home ! Thorens TD 160 BC Mk II with Linn LVX Arm - 2 top brands together - a great combo for the discerning vinyl enthusiast at a reasonable price. Silver Head shell leads, alignment card and adjustment allen keys included. No Cartridge. Due to the nature of the product regret cant accept returns on this one, but please check out the very detailed pictures and description / specs. below. For any additional information please contact me for a prompt response. TURNTABLE: Thorens TD160 BC MKII- made in Germany • Good condition and fully functional • Speed - 33 and 45 RMP - verified with strobe • AC synchronous motor - 110 to 125 V AC ; 117 v nominal, 60 Hz • New Belt - after market • Platter Spindle and main bearing: very smooth, good condition and lubed. • Clear Cover in good condition - some minor scuff marks, very slight haze present but very presentable • Cover hinges in good working order and stress free - cover can be easily removed and put back on the hinges • Top, Base and all around sides - some minor scuff marks but overall very presentable ARM: LINN SONDEK BASIK LVX - Made in Japan • As the 1st owner - arm is from my own Linn LP12 TT - it has been handled with great care throughout • Head shell is detachable - Hex socket head screw clamp for rigidity- VERY SECURE ! • Arm bearings - very smooth condition • Arm rest clip newly replaced - has nice click feel when closed • Counter weight rubber insert newly replaced, upgraded - SECURE and STABLE • Bias control: Working very well • Cueing: Working very smoothly • Some cosmetic ageing, minor marks at some places may be present, barely noticeable ARM SPECS • Effective Arm Length: 229 mm • Arm pivot to TT center: 211 mm • Overhang: 18 mm • Effective Mass: 10 Grams • Tracking force 0 - 3 gram • Arm Height adjustment: Single 5 mm Allen (Hex Socket head) screw ARM BOARD • Machined black acrylic, 5 mm thick mounted to sub-chassis standoffs with recessed M3 Hex Socket head Screws • Arm Board is removable from top, if required - no need to open TT base • Arm Pillar Base Pre-mounted; Linn 3 hole mounting pattern • Arm Pivot to TT center preset to arm specs: 211 mm PHONO LEADS • Original Linn Leads - excellent gold plating condition on connector and arm base • Gold plated RCA plugs (after market replacements) in very good condition • Cable Resistance per channel (includes arm wiring): - Less than 0.6 ohms RCA Tip to Head shell leads; less than 0.6 ohms RCA ground to head shell leads - Cable Capacitance per channel (includes arm wiring) ; less than 115 pf RCA Center Pin to Ground EXTRAS INCLUDED • Silver connector leads included in head shell • Allen Keys for Head Shell and Arm height adjustment • Printout of Alignment protector - printed on card stock PACKAGING • DOUBLE BOXED packed with extreme care - bubble / shrink wrapped as needed • Will ship as per Thorens recommendations: - Suspension locked - Arm counterweight packed separately - Main and sub platter padded and restrained

Thorens Plattenbesen zu verkaufen. Goldfarben, eine Rarität. Höhenverstellbar und das Auflagegewicht ist auch verstellbar. Kann aufgestellt werden, geklebt oder verschraubt werden. Er ist im original Zustand, mit Patina. Shipping in the EU is 15,00€ with DHL include tracking. Liebe Freunde alter Technik, alles was ich anbiete ist mindestens dreißig Jahre alt und gebraucht worden. Ich beschreibe alles nach bestem Wissen, sollte es einmal Probleme geben bitte melden Sie sich, wir finden immer, eine für alle, freundliche Lösung. Privatverkauf, keine Garantie keine Rücknahme. Keine Haftung für Transportschäden, alles wird versichert verschickt und natürlich gut verpackt. Sie kaufen vom Radio Fernsehtechniker Meister. dewabit

Thorens Silberkabel 4x 60 cm mit Goldstecker

Vintage Audio UKVALVE AMPLIFIERS . TURNTABLES . LOUDSPEAKERS . VALVES TANNOY . QUAD . LEAK . GARRARD . SME . ROGERS . LOWTHER . DECCA MULLARD . BRIMAR . GEC . MAZDA . MARCONI WORLDWIDE SHIPPINGDescription Vintage Goldring Lenco G88 Transcription Idler Turntable Motor - No:8844& Vintage Garrard TPA12 Tonearm with Garrard CartridgeTurntable Speeds 16/33/45/78. Turntable Motor has been tested working, but I would recommend a service before use due to its vintage age. Classic Goldring G88 turntable & Garrard TPA12 Tonearm Similar to Garrard 301/401 turntables & SME Tonearms.All parts are original sold as seen.The Goldring 88 transcription turntable is often ignored and under-rated but is actually a fantastic turntable. The 88 was the top of Goldrings range and made by Lenco in Switzerland. It was designed to compete directly with the Garrard 301 and the Thorens TD-124. HiFi World mention it in the same breath as both the Garrard 401 and the Technics SL10 which gives you an idea of how good a reputation these turntables have. An idler wheel is used to drive a platter weighing 8lb ( 3.6kg ). The heavy weight of the platter helps to give very low wow and flutter, leading to accurate sound. It also provides very solid bass response. Sound quality is excellent.Please check the photos I Will Ship Worldwide!Check my other auctions for vintage audio. Shipping Policy Worldwide postage through eBay global shipping programme. All items are sent within 3-5 days of auction ending. All orders are tracked with DHL, UPS, DPD or Royal Mail with protective packing for transit. Thank you for looking, please check my other eBay auctions Vintage Audio UK BRITISH AUDIO SPECIALISTS FOR 25 YEARS

Thorens Trophäe TD-3001 Schweizer High-End Preis 1991 Goldene Stimmgabel.

Thorens Trophäe TD-3001 Schweizer High-End Preis 1991 Goldene Stimmgabel.

Classic Turntable Thorens TD 160B mk ll Rega RB300 Tone Arm Goldring 1012XG HiFi. Classic turntable has a great sound. Recently refurbished. Rega RB300 carbon fibre tonearm and arm board. Expensive and great sounding Goldring 1012XG stylus and cart - Unknown playing hours but sound is well detailed and crisp in our tests. Sound deadening applied to the main mounting plate, floating platform, and motor housing to reduce vibration. 12mm mdf attached to floating platform to reduce vibration. New springs. New drive belt. 3D printed replacement lid hinges. Showing some signs of use - but nothing more than you would expect a classic turntable to show. A great classic turntable which, when set up correctly (as with all turntables) it sounds amazing. Sad to let it go but in need of the space as have upgraded. Collection preferred - will refund postage costs in full if collected. 35 Postage at Buyers risk - a video of the item working will be taken before dispatch and shared with buyer. Item will be packaged as best we can, with platter removed, and set via tracked courier. Returns not accepted. Listed in multiple places, so we reserve the right to remove listing when it sells. Buy with confidence - check out our feedback