Restored Thorens TD160 Turntable Electric Orange Ice Blue With Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Reconditioned THORENS TD160 orange-ice blue metallic with SME 3009 tonearmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting ice blue metallicOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical, naked): 199Ortofon VinylMaster Silver (Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 MKII Turntable Black Petrol & Sme 3009 S IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in glossy black but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in shiny black but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored 160 MK II in black - petrol metallic with SME 3009 Series IIIOur record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting petrol metallicOrtofon Vinyl Master Alpha pickup:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.So you can start with a VM Alpha and then improve the quality by using the next needle slot. Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck. Height-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

Restored Thorens TD 160 Turntable Sme 3009 Series III Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUNDThorens TD160 with SME Series IIIItem description:Limit switch:    NoInner plate:             metalSpindle:                   10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is elaborate with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The bottom of the case is equipped with three openings for horizontal alignment of the turntable.Cover plate:New cover plate made of 1mm brushed stainless steelOrtofon Vinyl Master Alpha pickup:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Turntable feet:Four height-adjustable spikes made of chrome-plated stainless steel. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 160

Restored Thorens TD160 B Mkii Sme 3009 Turntable Dark Ocean Blue MetThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 160 B MKII with SME 3009 II in dark ocean blue metallicOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting dark ocean blue metallicThe Ortofon VinylMaster Alpha cartridge:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799 The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 160 B MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160B Mkii Turntable IN Yellow Curry & Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! RESTORED by ART-AND-SOUND Restored 160B MKII in curry yellowwith SME 3009WITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:original, mint conditionThe Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).. --------The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM including installation:Ortofon Vinyl Master Silver (Fritz Gyger): €490The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact secur Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160B MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Electric Orange Ice Blue With Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Reconditioned THORENS TD160 orange-ice blue metallic with SME 3009 tonearmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting ice blue metallicOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical, naked): 199Ortofon VinylMaster Silver (Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD 160 Turntable Sme 3009 Series III Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUNDThorens TD160 with SME Series IIIItem description:Limit switch:    NoInner plate:             metalSpindle:                   10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is elaborate with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The bottom of the case is equipped with three openings for horizontal alignment of the turntable.Cover plate:New cover plate made of 1mm brushed stainless steelOrtofon Vinyl Master Alpha pickup:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Turntable feet:Four height-adjustable spikes made of chrome-plated stainless steel. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 160

Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay ! Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay ! Cette platine vinyle est disponible en 220V/230/50Hz ou 110V/120/60Hz (par exemple USA)DANGER! Le changement suivant sapplique ! Le plateau tournant nest plus livré en poli mais en noir mat !DANGER! Le changement suivant sapplique ! Le plateau tournant nest plus livré en poli mais en noir mat !Vous pouvez trouver des offres encore plus intéressantes chez nous. Jeter un coup dœil à... Art et Son AllemagneRESTAURÉ par ART-AND-SONThorens TD160 avec PME série IIIDescription de larticle :Fin de course :    NonPlaque intérieure :             métalBroche:                   10mm Dimensions de base :            Largeur : 45 cm, profondeur : 36 cm, hauteur environ 18 cmLogement:Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Il est élaboré avec plusieurs couches de vernis ultra brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière. Le fond du boîtier est équipé de trois ouvertures pour lalignement horizontal du plateau tournant.Plaque de couverture:Nouvelle plaque de recouvrement en acier inoxydable brossé de 1 mmMicro Ortofon Vinyl Master Alpha :LOrtofon Alpha est un pick-up à part entière. Il impressionne par son tempérament et son caractère de base neutre. Le VinylMaster Alpha est doté dun stylet elliptique qui permet une lecture équilibrée et sans distorsion.Câble audio:Câble de marque Oelbach. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace.Plaque tournante:Le plateau tournant est peint en noir mat. Il confère à votre tourne-disque une élégance durable et discrète.Pieds du plateau tournant :Quatre pointes réglables en hauteur en acier inoxydable chromé. Nouvelle courroie dentraînement :Cette courroie de transmission est fabriquée selon les spécifications dorigine Thorens (même matériau et mêmes dimensions).Poids record en acier inoxydable :Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence. En lutilisant, vous augmentez les performances sonores de votre système.Ce qui suit les pièces sont comme Accessoiresör euhunliltique et pas composant ce enchères:Le suivant les pièces sont disponible comme accessoires et pas inclus dans ce enchères:Petite capuche (à poser sur le cadre) : 160Grande capuche (à poser sur la sous-structure) : 180 Système à cartouche MM comprenant linstallation :Ortofon VinylMaster Rouge (elliptique) : 190 Ortofon VinylMaster Silver (Fritz Gyger, nu) : 390Ortofon 2M Rouge (elliptique) : 90 Ortofon 2M Bleu (elliptique, nu) : 190 Ortofon 2M Bronze (ligne fine) : 390Ortofon 2M Noir (Shibata) : 590Ortofon 2M Noir LVB 250 : 890 Système MC à cartouche comprenant linstallation : AUDIO-TECHNICA AT-OC9XML (microlinéaire) : 599AUDIO TECHNICA AT-OC9XSH (Shibata) : 699AUDIO-TECHNICA AT-OC9XSL (Contact de ligne spéciale) : 799Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Il est élaboré avec plusieurs couches de vernis ultra brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière. Le fond du boîtier est équipé de trois ouvertures pour lalignement horizontal du plateau tournant. Câble de marque Oelbach. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfi

Restored Thorens TD160 B Mkii Sme 3009 Turntable Dark Ocean Blue MetThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 160 B MKII with SME 3009 II in dark ocean blue metallicOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting dark ocean blue metallicThe Ortofon VinylMaster Alpha cartridge:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799 The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 160 B MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay !Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay !Cette platine vinyle est disponible en 220V/ 50Hz ou 110V/60Hz (Par exemple ÉTATS-UNIS)! RESTAURÉ par ART-AND-SON 160B MKII restauré en jaune curryavec PME 3009AVEC UN POIDS DE COMBAT DE PLUS DE 10 KG !!!Nos platines sont assemblées, modifiées et assemblées avec amour à la main.Chacun deux est unique et diffère par son modèle, sa couleur et son grain de placage.Les boîtiers de haute qualité sont restaurés ou nouvellement fabriqués selon un savoir-faire qualifié.Les composants électriques sont vérifiés, Pièces mobiles huilées et pièces dusure remplacées.Un dernier test dendurance complète le travail complexe.Le client reçoit un appareil haut de gamme.Description de larticle :Fin de course :     NonPlaque intérieure : métalMandrin de roulement : 7mm Dimensions de base :            Largeur : 45 cm, profondeur : 36 cm, hauteur environ 18 cm Le logement :Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Cest très complexe avec plusieurs couches de vernis très brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière.Façade :état dorigine, parfaitLa cellule Ortofon OM 5E :Avec la série OM, Ortofon crée depuis longtemps la cellule MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. LOM 5E est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme.La série OM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec un OM 5E puis améliorer la qualité avec linsert daiguille approprié en utilisant linsert daiguille suivant.Le câble audio :Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace. Le plateau tournant :Le plateau tournant est réalisé en cinq étapes complexes et chronophages poli pour une brillance élevée.Le vernis brillant donne à votre tourne-disque un look unique.Avec scellement de surface à laide dun revêtement protecteur spécial pour éviter le ternissement répété et pour une brillance durable.Pointes en acier inoxydable chromé:Pour que le tourne-disque soit découplé des vibrations basses fréquences, Le châssis est équipé de pointes réglables en hauteur. Les résonances et les retours sont ainsi efficacement évités. La courroie dentraînement :La courroie dentraînement est neuve. Il est fabriqué selon les spécifications originales de Thorens (même matériau et mêmes dimensions).. ---------Ce qui suit les pièces sont comme Accessoiresör euhunliltique et pas composant ce enchères:Le suivant les pièces sont disponible comme accessoires et pas inclus dans ce enchères: Cartouche MM avec installation:Ortofon Vinyl Master Argent (Fritz Gyger) : 490 €Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Cest très complexe avec plusieurs couches de vernis très brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière. Avec la série OM, Ortofon crée depuis longtemps la cellule MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. LOM 5E est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme. Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Cest très complexe avec plusieurs couches de vernis très brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière. Avec la série OM, Ortofon crée depuis longtemps la cellule MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. LOM 5E est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme. Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité

Restored Thorens TD160B Mkii Turntable IN Yellow Curry & Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! RESTORED by ART-AND-SOUND Restored 160B MKII in curry yellowwith SME 3009WITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:original, mint conditionThe Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).. --------The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM including installation:Ortofon Vinyl Master Silver (Fritz Gyger): €490The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact secur Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160B MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Electric Orange Ice Blue With Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Reconditioned THORENS TD160 orange-ice blue metallic with SME 3009 tonearmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting ice blue metallicOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical, naked): 199Ortofon VinylMaster Silver (Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Mkii Turntable Black Petrol & Sme 3009 S IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! REVISED by ART-AND-SOUND Restored 160 MK II in black - petrol metallic with SME 3009 Series IIIWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting petrol metallicThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:High-gloss finish in black, turntable support in transparent acrylic glass, 7 single puck made of demagnetized stainless steelHeight-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160Hood large (to put on the base): 180Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Blue (Nude fineline cut): 299Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899Cartridge MC System including installation:AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO TECHNICA AT-OC9XSL (Special Line Contact): 799The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inneThe housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inne Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 B Mkii Sme 3009 Turntable Dark Ocean Blue MetThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Discount and more interesting offers from us... Take a look at... Art and Sound GermanyIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!Revised by ART-AND-SOUND Restored 160 B MKII with SME 3009 II in dark ocean blue metallicWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting dark ocean blue metallicThe Ortofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160Hood large (to put on the base):           180Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 399 The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact se Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 160 B MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Cette platine vinyle est disponible en 220V/50Hz ou 110V/50/60Hz à lintérieur (par exemple aux USA ou dans le monde entier)Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay !Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay !RESTAURÉ par ART-AND-SON THORENS TD160 restauré avec SME 3009 noir et rouge bordeaux métalliséNos tourne-disques sont assemblés et assemblés avec amour à la main.Chacun deux est unique et diffère par son modèle, sa couleur et son grain de placage.Les boîtiers de haute qualité sont restaurés ou nouvellement fabriqués selon un savoir-faire qualifié.Les composants électriques sont vérifiés, Pièces mobiles huilées et pièces dusure remplacées.Un dernier test dendurance complète le travail complexe.Description de larticle :Fin de course :     NonPlaque intérieure : métalMandrin de roulement : 10mm Dimensions de base :            Largeur : 45 cm, profondeur : 36 cm, hauteur environ 18 cm Le logement :Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Cest très complexe avec plusieurs couches de vernis très brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière.Façade :Plaque de recouvrement en aluminium de 1 mm avec peinture de surface rouge bordeaux métalliséCellule Ortofon VinylMaster Alpha :Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. Le VM Alpha est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme. La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha puis améliorer la qualité en utilisant la fente daiguille suivante.Câble audio:Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace.Plaque tournante:Le plateau tournant est réalisé en cinq étapes complexes et chronophages poli pour une brillance élevée.Le vernis brillant donne à votre tourne-disque un look unique. Avec scellement de surface à laide dun revêtement protecteur spécial pour éviter le ternissement répété et pour une brillance durable.Pointes en acier inoxydable chromé:Pour que le tourne-disque soit découplé des vibrations basses fréquences, Le châssis est équipé de pointes réglables en hauteur. Les résonances et les retours sont ainsi efficacement évités. Courroie dentraînement :La courroie dentraînement est neuve. Il est fabriqué selon les spécifications originales de Thorens (même matériau et mêmes dimensions).Poids record en acier inoxydable :Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence. En lutilisant, vous augmentez les performances sonores de votre système. Ce qui suit les pièces sont comme Accessoiresör euhunliltique et pas composant ce enchères:Le suivant les pièces sont disponible comme accessoires et pas inclus dans ce enchères:Hotte à poser sur le boîtier : 160Système à cartouche MM comprenant linstallation :Ortofon VM Red (coupe elliptique nue) : 199Ortofon VM Argent (Nu Fritz Gyger coupe 70): 435Ortofon 2M Rouge (elliptique) : 99Ortofon 2M Bleu (elliptique, nu) : 199Ortofon 2M Bronze (Fineline) : 360Ortofon 2M Noir (Shibata) : 599Ortofon 2M Noir LVB 250 (Shibata avec porte-à-faux en bore) : 899 Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. Le VM Alpha est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme. La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha puis améliorer la qualité en utilisant la fente daiguille suivante. Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosioAvec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. Le VM Alpha est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme. La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha puis améliorer la qualité en utilisant la fente daiguille suivante. Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosio

Restored Thorens TD160 Turntable Black Burgundy Red Metallic & Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or world wide)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Restored THORENS TD160 with SME 3009 black and burgundy red metallicOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting burgundy red metallicOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound perform Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

DescriptionUsed ConditionPlease check the status description. PolicyPaymentPlease pay within 5 days after auction is finished.About UsAll of our goods are genuine articles. Moreover, we sell honestly. Please contact me, if you have your question.International Buyers - Please Note:Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

We use a 24 hour courier service but please allow up to 3 days handling time as a lot of our items are large and timeconsuming to package. Many thanks :) Please see our video of how we packaged turntables for transit here:-https://youtu.be/dVstrqCq0Gk Item Description: Fully working and tested Thorens TD160 SUPER with fixed headshell SME 3009 S2 tonearm (boxed)The Grado G1+ CD4 cartridge is low hours and BOXED. (both stereo and quadrophonic compatible) The SME has had an Fixed ADC magensium cartridge professionally fitted (a notaeble mod at the time) The original headshell is suppied along with the original SME box. It works beautifully, with no issues, the motor has no knocking, from a pet and smoke free home. Original box for turntable included. (top poly missing) Apart from a few light marks on the lid, it has little else in the way of cosmetic imperfections. A beautiful and formidably good turntable, the top of the 160 line.. New belt fitted a couple of years ago. This is a superb example. Please inspect the pictures (please also use the zoom function on the photos) and be sure of what you are buying, please don’t buy this if you are at all unsure, I will answer any questions you have, just email BEFORE PURCHASING. This is a used item and has been fairly described to the best of our ability. If you are not happy with any item, we can arrange collection from you for a full refund (even if you are outside the UK) We will not provide any partial refunds and will not cover any restoration, detailed or internal cleaning, repairs or modification costs. Any questions regarding out of eBay deals or part ex will be ignored as this is not allowed under ebay listing rules. Any items suspected missing in transit, must be reported to us within 10 days. Shipping We ship using a 24 hour courier. Please allow up to 3 days handling time as a lot of our items are large and take time to package well. Collections Collections from our unit in Bordon are available on Wednesdays and Fridays. Visit our storeHi-Fi Hangar Vintage hifi specialists Other PROJECTS, SPARES & REPAIRS HI-FI & AUDIO EQUIPMENT AMPLIFIERS DISK PLAYERS (CD/DVD/MD/SACD) TUNERS CASSETTE/TAPE DECKS SPEAKERS STUDIO EQUIPMENT TURNTABLES/RECORD PLAYERS CARTRIDGES TONEARMS MERCHANDISE T-SHIRTS ACCESSORIES Payment We take payment through the ebay managed payment system, Shipping We ship using a 24 hour courier. Please allow up to 3 days handling time as a lot of our items are large and take time to package well. _gsrx_vers_1608 (GS 9.5 (1608))

Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz inside (for example UNITED STATES)!Revised by ART-AND-SOUND Restored 160 B MKII with SME 3009 II in dark ocean blue metallicWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting dark ocean blue metallicThe Ortofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small Hood large Cartridge MM system including installation: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact se

This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Reconditioned THORENS TD160 orange-ice blue metallic with SME 3009 tonearmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting ice blue metallicOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical, naked): 199Ortofon VinylMaster Silver (Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310

The phonograph works with 220V/50Hz. For shipping to the USA the turntable is converted to 110V/60Hz.RESTORED by ART-AND-SOUND 160 with SME tonearm Series IIIItem description:Limit switch:    NoInner plate:             metalSpindle:                   10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is elaborate with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The bottom of the case is equipped with three openings for horizontal alignment of the turntable.New faceplate:New cover plate made of 1mm brushed stainless steelNew Ortofon Vinyl Master Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.New audio cable:Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Turntable feet:Four height-adjustable spikes made of chrome-plated stainless steel. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): eBay-item number 112409195158Hood big (for placing on the substructure):  eBay-item number 112411582098The following parts are available as accessories and not included in this auction:Hood small (to put on the housing):   German eBay-article number is 112409195158Hood large (to put on the base):           German eBay-article number is 112411582098Cartridge MM systems including installation:Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your

Cette platine vinyle est disponible pour 220 V-240 V (50/60 Hz) ou 100 V-130 V (50/60 Hz) – par exemple aux États-Unis et dans le monde entier.Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay !Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay !RESTAURÉ par ART-AND-SON THORENS TD160 reconditionné orange-bleu glacier métallisé avec bras de lecture SME 3009Nos platines sont assemblées, modifiées et assemblées avec amour à la main.Chacun deux est unique et diffère par son modèle, sa couleur et son grain de placage.Les boîtiers de haute qualité sont restaurés ou nouvellement fabriqués selon un savoir-faire qualifié.Les composants électriques sont vérifiés, Pièces mobiles huilées et pièces dusure remplacées.Un dernier test dendurance complète le travail complexe.Le client reçoit un appareil haut de gamme. Description de larticle :Fin de course :     NonPlaque intérieure : métalMandrin de roulement : 10mm Dimensions de base :            Largeur : 45 cm, profondeur : 36 cm, hauteur environ 18 cm Logement:Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Cest très complexe avec plusieurs couches de vernis très brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière.Plaque de couverture:Plaque de recouvrement en aluminium de 1 mm avec peinture de surface bleu glacier métalliséMicro Ortofon Vinyl Master Alpha :Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. La VM Alpha est lentrée dans la série des platines vinyles de milieu de gamme. La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha puis améliorer la qualité en utilisant la fente daiguille suivante.Câble audio:Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace. Plaque tournante:Le plateau tournant est réalisé en cinq étapes complexes et chronophages poli pour une brillance élevée.Le vernis brillant donne à votre tourne-disque un look unique. Avec scellement de surface à laide dun revêtement protecteur spécial pour éviter le ternissement répété et pour une brillance durable.Pointes en acier inoxydable chromé:Pour que le tourne-disque soit découplé des vibrations basses fréquences, Le châssis est équipé de pointes réglables en hauteur. Les résonances et les retours sont ainsi efficacement évités. Courroie dentraînement :La courroie dentraînement est neuve. Il est fabriqué selon les spécifications originales de Thorens (même matériau et mêmes dimensions).Poids record en acier inoxydable :Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence. En lutilisant, vous augmentez les performances sonores de votre système.Ce qui suit les pièces sont comme Accessoiresör euhunliltique et pas composant ce enchères:Le suivant les pièces sont disponible comme accessoires et pas inclus dans ce enchères:Petite capuche (à poser sur le cadre) : 160Grande capuche (à poser sur la sous-structure) : 180Système à cartouche MM comprenant linstallation :Ortofon VinylMaster Red (elliptique, nu) : 199Ortofon VinylMaster Argent (Fritz Gyger 70 coupé): 435Ortofon 2M Rouge (elliptique) : 99Ortofon 2M Bleu (elliptique, nu) : 229Ortofon 2M Bronze (ligne fine) : 390Ortofon 2M Noir (Shibata) : 599Ortofon 2M Black LVB 250 (Shibata avec cantilever en bore) : 899 Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. La VM Alpha est lentrée dans la série des platines vinyles de milieu de gamme. La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha puis améliorer la qualité en utilisant la fente daiguille suivante. Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or

Le phonographe marche avec 220V/50 Hz. Pour lexpédition aux États-Unis, le plateau tournant est converti en 110 V/60 Hz.RESTAURÉ par ART-AND-SON 160 avec bras de lecture SME Série IIIDescription de larticle :Fin de course :    NonPlaque intérieure :             métalBroche:                   10mm Dimensions de base :            Largeur : 45 cm, profondeur : 36 cm, hauteur environ 18 cmNouveaux logements :Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Il est élaboré avec plusieurs couches de vernis ultra brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière. Le fond du boîtier est équipé de trois ouvertures pour lalignement horizontal du plateau tournant.Nouvelle façade :Nouvelle plaque de recouvrement en acier inoxydable brossé de 1 mmNouvelle cartouche Ortofon Vinyl Master Alpha (incluse) :Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier.La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha puis améliorer la qualité en utilisant la fente daiguille suivante.Nouveau câble audio :Câble de marque Oelbach. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace. Le plateau tournant :Le plateau tournant est réalisé en cinq étapes complexes et chronophages poli pour une brillance élevée.Le vernis brillant donne à votre tourne-disque un look unique.Avec scellement de surface à laide dun revêtement protecteur spécial pour éviter le ternissement répété et pour une brillance durable.Pieds du plateau tournant :Quatre pointes réglables en hauteur en acier inoxydable chromé. Nouvelle courroie dentraînement :Cette courroie de transmission est fabriquée selon les spécifications dorigine Thorens (même matériau et mêmes dimensions).Nouveau poids record en acier inoxydable :Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence. En lutilisant, vous augmentez les performances sonores de votre système.Ce qui suit les pièces sont comme Accessoiresör euhunliltique et pas composant ce enchères:Petite capuche (à poser sur le cadre) : eBay-numéro darticle 112409195158Grande capuche (à poser sur la sous-structure) :  eBay-numéro darticle 112411582098Le suivant les pièces sont disponible comme accessoires et pas inclus dans ce enchères:Petite capuche (à mettre sur le boîtier):   eBay allemand-article nombre est 112409195158Grande capuche (à mettre sur le socle) :           eBay allemand-article nombre est 112411582098Systèmes à cartouche MM avec installation :Le boîtier se compose de panneaux latéraux en MDF de 25 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Il est élaboré avec plusieurs couches de vernis ultra brillant scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière. Le fond du boîtier est équipé de trois ouvertures pour lalignement horizontal du plateau tournant. Câble de marque Oelbach. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfi

Restored Thorens TD160 Turntable Black Burgundy Red Metallic & Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or world wide)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Restored THORENS TD160 with SME 3009 black and burgundy red metallicOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting burgundy red metallicOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound perform Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland