Restored Thorens TD 125 MKII Turntable With Sme Tracking Arm 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.RESTORED and MODIFIED by ART-AND-SOUND Restored 125 MKII with SME 3009 tonearmDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmAudio and Power cables are firmly connected to the turntable. The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm gold anodized aluminumThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Original SME cableThe turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 112401191474The following parts are available as accessories and not included in this auction:Hood (to put on the housing):    German eBay-article number is 112401191474Cartridge MM systems including installation: Cartidge MC systems including installation:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strai Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

We use a 48 hour courier service but please allow up to 3 days handling time as a lot of our items are large and timeconsuming to package. Many thanks :) Please see our video of how we packaged turntables for transit here:- https://youtu.be/dVstrqCq0Gk Item Description: Wonderful example of the classic Thorens TD-125 MK.II vintage turntable. Fitted with an SME 3009 s2 improved tonearm and Shure V15 type III cartridge. The stylus is running a little higher in the body and is quite close to the record, so we have added a modern repro stylus that works great and sits higher.. but the oringal still works and soiunds great. Practically unmarked I have never see a better example of this classic deck. Very little in the way of cosmetic imperfections.. probably the best example on the market. Please inspect the pictures (please also use the zoom function on the photos) and be sure of what you are buying, please don’t buy this if you are at all unsure, I will answer any questions you have, just email BEFORE PURCHASING. This is a used item and has been fairly described to the best of our ability, it has not been serviced by us, just described in it’s current operational and cosmetic order. If you are not happy with any item, we can arrange collection from you for a full refund (even if you are outside the UK) We will not provide any partial refunds and will not cover any restoration, detailed or internal cleaning, repairs or modification costs. Any questions regarding out of eBay deals will be ignored Any items suspected missing in transit, must be reported to us within 10 days. Shipping We ship using a 24 hour courier. Please allow up to 3 days handling time as a lot of our items are large and take time to package well. Collections Collections from our unit in Bordon are available on Wednesdays and Fridays. Visit our storeHi-Fi Hangar Vintage hifi specialists Other PROJECTS, SPARES & REPAIRS HI-FI & AUDIO EQUIPMENT AMPLIFIERS DISK PLAYERS (CD/DVD/MD/SACD) TUNERS CASSETTE/TAPE DECKS SPEAKERS STUDIO EQUIPMENT TURNTABLES/RECORD PLAYERS CARTRIDGES TONEARMS MERCHANDISE T-SHIRTS ACCESSORIES Payment We take payment through the ebay managed payment system, Shipping We ship using a 24 hour courier. Please allow up to 3 days handling time as a lot of our items are large and take time to package well. _gsrx_vers_1652 (GS 9.7.4 (1652))

Excellent condition. New cover. Works great! Includes a Shure sme-3009 tone arm with a Shure V15 type 3 cartridge and stylus. Also includes original paperwork.

Revised Thorens TD 125 MKII Turntable Black Orange & Sme 3009 Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA).Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay! Restored Thorens TD125 MKII with SME 3009 S2 improvedin black, orange-metallic ATTENTION: The brass tonearm cutting bearing was replaced by the original plastic one!Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing: The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Cartridge MM system including installation:Ortofon VM Red (elliptical, naked): 199Ortofon VM Blue (Fineline): 299Ortofon VM Silver (Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked):199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata): 975 AUDIO-TECHNICA VM 740ML (Dual MM, Microlinear): 339AUDIO-TECHNICA VM 750 SH (Dual MM, Shibata): 439AUDIO TECHNICA VM 760 SLC (Dual MM, special line contact grind): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 Normal 0 21 false false false DE X-NONE X-NONE The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a we Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Normal 0 14 false false false IT X-NONE X-NONE

Desired Color! Revised Thorens TD 125 MKII Turntable With Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing, top plate and tonearm base yourself.You can choose the color of the housing, the cover plate and the tonearm base yourself.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII in desired color with SME 3009 ATTENTION: The brass tonearm cutting bearing was replaced by the original plastic one!Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:Painted in your desired color!The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Cover plate:The cover plate is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions). Plate weight:With a weight of 320g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood: The hood is a new product (replica) with a wall thickness of 4mm, extremely stable, Plexiglas XT, absolutely colorless and clear, break-proof to impact-resistant, weatherproof and... Age-resistant, high-quality surface and flatness: 160XXL device feet:Solid stainless steel, height adjustable, total weight 2.5kg, diameter 65mm: 129Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata, boron needle carrier): 899The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 32 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable Black Orange Sme 3009 Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The base is screwed to the frame and can be easily removed.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood: The hood is a new product (replica) with a wall thickness of 4mm, extremely stable, Plexiglas XT, absolutely colorless and clear, break-proof to impact-resistant, weatherproof and... Age-resistant, high-quality surface and flatness: 160XXL device feet (Figure 9-12):Solid stainless steel, height adjustable, total weight 2.5kg, diameter 65mm: 129Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata, boron needle carrier): 899Cartridge MC System including installation: Audio-technica AT-OC9XML (Microlinear): 599Audio-technica AT-OC9XSH (Shibata): 699Audio-technica AT-OC9XSL (Special Line Contact): 799The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor m Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Excellent condition. New cover. Works great! Includes a Shure sme-3009 tone arm with a Shure V15 type 3 cartridge and stylus. Also includes original paperwork.

Excellent condition. New cover. Works great! Includes a Shure sme-3009 tone arm with a Shure V15 type 3 cartridge and stylus. Also includes original paperwork.

Restored Thorens TD 125 MKII Turntable Also Sme 3009 PossibleThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 125 MKII in flight green and stainless steelAlso possible with different SME 3009 tonearms20kg turntableOur record players are lovingly put together, restored and assembled by hand. Each of them is unique and differs in model, color, veneer grain or other details. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:      NoInner plate: metalSpindle: 10mmBasic dimensions:            Width: 525mm, depth: 413mm, height 97mThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of endurance testHousing:The housing consists of 40mm MDF side panels and a 16mm thick base, also made of MDF. The surface was painted several times and then polished. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): 6.3 kgOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. Drive belt:The drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood:for placing on the housing: 160 Device feet XXL: 90Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2520g, diameter 65mm, height 26mmSME tonearms (the matching systems are selected according to the tonearms): SME Series III (replaceable tonearm tube, eff. Mass approx. 5g): 690 SME 3009 improved (fixed headshell, eff. Mass 6.5g): 690 SME 3009 S2 improved (replaceable headshell, eff. Mass 9.5g): 690 SME 3009 Series II (replaceable headshell, eff. Mass 12.5g): 790 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799Our record players are lovingly put together, restored and assembled by hand. Each of them is unique and differs in model, color, veneer grain or other details. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g Antriebstyp Riemenantrieb Marke Thorens EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD 125 MKII Turntable With Sme 3009 Birnenholz OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Reconditioned 125 MKII with SME 3009 in a solid oiled pear wood frame20kg turntablePlease note that wood is a natural product. The grain and color will always differ from the item photos.Our record players are lovingly put together, restored and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Pickup:         Ortofon VinylMaster Alpha (not as shown)Device feet: Stainless steel, height adjustable, 65mm x 25mm, total weight 2.5kgLift control:          Frontally on the control bar and on the tonearmLimit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:The housing consists of 40mm solid pear wood side panels and a 16mm thick MDF base. The surface was oiled and polished several times. The connection panel for all required cables is located on the back. Four height-adjustable stainless steel device feet are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): approx. 6.3kgOrtofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. Drive belt:The drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Cartridge MM system including installation:Ortofon VM Red (elliptical, naked): 199Ortofon VM Silver (Fritz Gyger 70 cut): 399Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked):229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO TECHNICA VM 760 SLC (special line contact grind): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable With Sme 3009 Birnenholz OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Excellent condition. New cover. Works great! Includes a Shure sme-3009 tone arm with a Shure V15 type 3 cartridge and stylus. Also includes original paperwork.

Desired Color! Revised Thorens TD 125 MKII Turntable Sme 3009 Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing, top plate and tonearm base yourself.You can choose the color of the housing, the cover plate and the tonearm base yourself.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:Painted in your desired color!The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Cover plate:The cover plate is painted in your desired color!Tonearm base:The tonearm base is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented.XL (see pictures 11 and 12): 84XXL (see pictures 9 and 10): 130Cartridge MM system including installation: Ortofon VinylMaster Red (naked elliptical cut):             220Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut):        470 Ortofon 2MRed (elliptical):             99Ortofon 2M Blue (diamond cut):   220Ortofon 2M Bronze (fineline diamond cut): 390 Ortofon 2M Black (Shibata diamond cut):         599 Ortofon 2M Black LVB 250 (Shibata diamond cut):              945audio-technica VM740ML Dual MM (Microlinear Needle):        339audio-technica VM750SH Dual MM (Shibata needle):                439 audio-technica VM760SLC Dual MM (Special Line Contact):  699Cartridge MC System including installation: audio-technica AT-OC9XML Dual MC (Microlinear Needle):    599 audio-technica AT-OC9XSH Dual MC (Shibata needle grind):  699 audio-technica AT-OC9XSLDual MC (Special Line Contact): 799The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxy Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Excellent condition. New cover. Works great! Includes a Shure sme-3009 tone arm with a Shure V15 type 3 cartridge and stylus. Also includes original paperwork.

Revised Thorens TD 125 MKII Turntable Black Orange Sme 3009 Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The base is screwed to the frame and can be easily removed.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood: The hood is a new product (replica) with a wall thickness of 4mm, extremely stable, Plexiglas XT, absolutely colorless and clear, break-proof to impact-resistant, weatherproof and... Age-resistant, high-quality surface and flatness: 160XXL device feet (Figure 9-12):Solid stainless steel, height adjustable, total weight 2.5kg, diameter 65mm: 129Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata, boron needle carrier): 899Cartridge MC System including installation: Audio-technica AT-OC9XML (Microlinear): 599Audio-technica AT-OC9XSH (Shibata): 699Audio-technica AT-OC9XSL (Special Line Contact): 799The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor m Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

In sehr gutem Zustand, voll funktionsfhig, 1A Zustand, kein Kratzer, ich versende 2 Pakete

Excellent condition. New cover. Works great! Includes a Shure sme-3009 tone arm with a Shure V15 type 3 cartridge and stylus. Also includes original paperwork.

Desired Color! Revised Thorens TD 125 MKII Turntable With Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing, top plate and tonearm base yourself.You can choose the color of the housing, the cover plate and the tonearm base yourself.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII in desired color with SME 3009 ATTENTION: The brass tonearm cutting bearing was replaced by the original plastic one!Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:Painted in your desired color!The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Cover plate:The cover plate is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions). Plate weight:With a weight of 320g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood: The hood is a new product (replica) with a wall thickness of 4mm, extremely stable, Plexiglas XT, absolutely colorless and clear, break-proof to impact-resistant, weatherproof and... Age-resistant, high-quality surface and flatness: 160XXL device feet:Solid stainless steel, height adjustable, total weight 2.5kg, diameter 65mm: 129Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata, boron needle carrier): 899The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 32 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

tonearm board for thorens td 125 mk II and sme 3009, black. Comes with 4 screws (one a little bent). The board was taken from a td 125 mkII turntable with an sme 3009 arm. It is in fine working condition with signs of use, minor scratches and scuffs. Easily refinished. as is condition. Ships from Pa.

DESCRIPTION: UP FOR SALE IS RARE TO FIND THORENS TD 125 TURNTABLE.THIS TURNTABLE COMES WITH SHURE SME 3009 TONEARM, SHURE SME HEADSHELL AND BRAND NEW DUST COVER, ORDERED FROM GERMANY AND INSTRUCTION PAPERS. 45 RPM ADAPTER IS INCLUDED, ANTI-SKATING WEIGHT IS INCLUDED AND RUBBER MAT IS ALSO INCLUDED. THE ONLY THING THAT NEEDS TO BE MENTIONED IS THAT ORIGINAL COVER HINDGES ARE NOT INCLUDED BUT OUR TECH IMPROVISED SOMETHING TO HOLD THIS COVER IN UPRIGHT POSITION. IT HAS TO BE LIFTED UP AND CLOSED UP MANUALLY AND COVER IS NOT ATTACHED TO THESE HINDGES. HINDGES ARE JUST HOLDING COVER IN UPRIGHT POSITION. THIS TURNTABLE IS FULLY FUNCTIONAL, ALL FUNCTIONS WORK GREAT, EVERYTHING IS IN FLAWLESS WORKING ORDER, NO ISSUES AT ALL. ALL INPUTS AND OUTPUTS WORK PROPERLY. RECENTLY WAS BENCH CHECKED, SERVICED (WHATEVER NEEDED OUR TECHS ATTENTION), CLEANED, LUBED AND FULLY TESTED BY PROFESSIONAL TECH WITH 30+ YEARS OF SERVICE. THIS IS THE LINK WHERE YOU CAN SEE HOW TO ADJUST THE SUSPENSION ON THIS THORENS. https://youtu.be/4RCj31Jaycg?si=PvQwvaptppyeGoej ALSO, I WOULD SUGGEST WHOEVER PURCHASE THIS TURNTABLE TO GET IN TOUCH WITH ME, SO I CAN PROVIDE YOU MY TECHS CELL # AND HE CAN WALK YOU THROUGH THE SET UP PROCESS. COSMETICALLY SPEAKING, IT LOOKS VERY NICE WITH SOME MINIMAL SIGNS OF USE AND WEAR. THERE IS ONE SCUFF/SCRATCH THAT WE PICTURED AND CIRCLED IN RED. MAYBE YOU CAN FIND SOME LIGHT SURFACE SCRATCH OR TWO HERE AND THERE, BUT HONESTLY, NOTHING WORTH OF MENTIONING. PLEASE CHECK THE PICTURES AND LET YOUR EYES BE A JUDGE. THESE PICTURES ARE PART OF THIS DESCRIPTION. PLEASE FEEL FREE TO CONTACT US IF YOU NEED MORE INFO. THANKS. PAYMENT INFO: PAY PAL PAYMENTS ARE PREFERRED.PAYMENT EXPECTED WITHIN 3 DAYSAFTER THE AUCTION HAS ENDED. SHIPPING: ITEM WILL BE SHIPPED WITHIN 24 HOURS OF PAYMENTCLEARING EXCEPT SATURDAY AND SUNDAY. YOU WILL KNOW YOUR TRACKING NUMBER ANDALL THE SHIPPING DETAILS. WE SHIP VIA FEDEX GROUND OR HOME DELIVERY. USPS OR UPS SERVICES ARE USED VERY RARELY. ALL PACKAGES ARE SHIPPED WITH INSURANCE AND SIGNATURE REQUIRED OPTION, IF THE ITEM VALUE IS LARGER THAN $100.00. IF YOU DONT WANT SIGNATURE REQUIRED OPTION, PLEASE NOTIFY US BEFORE WE SHIP THE ITEM.IN SOME RARE CASES, AND FOR INTERNATIONAL SHIPMENTS, WE WILL USE USPS.IN THE VERY RARE EVENT THAT AN ITEM ARRIVES NOT ASDESCRIBED IN OUR ADS, WE WILL RESOLVE THE ISSUE(S) WITHTHE CUSTOMER TO THEIR SATISFACTION. IF SOMEHOW YOUR ITEM COMES DAMAGED, WHERE SHIPPING HAS CAUSED APROBLEM EITHER FUNCTIONALLY OR COSMETICALLY, PLEASE CONTACT US AS SOON AS POSSIBLE FOR FURTHER INFO. ALL OUR ITEMS ARE INSURED.FREE SHIPPING IS FOR DOMESTIC STATES ONLY. INTERNATIONAL BUYERS NEED TO CONTACT ME BEFORE PURCHASING THE ITEM. FREE SHIPPING IS FOR 48 CONTINENTAL US COUNTRIES ONLY. OTHER COUNTRIES, PLEASE CONTACT US , SO WE CAN CALCULATE THE SHIPPING COST FOR YOUR COUNTRY. CUSTOMERS FROM ALASKA, HAWAII, PUERTO RICO AND GUAM NEED TO CONTACT US BEFORE PURCHASE, SO WE CAN CALCULATE THE SHIPPING COST FIRST. WE DO NOT SHIP TO PO BOXES. Loading message... Und

Revised Thorens Td 125 Mkii Turntable With Sme 3009 IN Birnenholz OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!Revised by ART-AND-SOUND Reconditioned 125 MKII with SME 3009 in a solid oiled pear wood frame20kg turntablePlease note that wood is a natural product. The grain and color will always differ from the item photos.Our record players are lovingly put together, restored and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Pickup:         Ortofon VinylMaster Alpha (not as shown)Device feet: Stainless steel, height adjustable, 65mm x 25mm, total weight 2.5kgLift control:          Frontally on the control bar and on the tonearmLimit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:The housing consists of 40mm solid pear wood side panels and a 16mm thick MDF base. The surface was oiled and polished several times. The connection panel for all required cables is located on the back. Four height-adjustable stainless steel device feet are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): approx. 6.3kgOrtofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:The drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Cartridge MM system including installation:Ortofon VM Red (elliptical, naked): 199Ortofon VM Silver (Fritz Gyger 70 cut): 399Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked):229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO TECHNICA VM 760 SLC (special line contact grind): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable With Sme 3009 Birnenholz OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland