Revised Thorens TD 125 MKII Turntable Black Orange Sme 3009 Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time specified on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly assembled, modified and assembled by hand. Each of them is unique and differs in model, colour, veneer grain. The high-quality cases are restored or newly manufactured in qualified craftsmanship. Electrical components are checked, moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The customer receives a top-class device.Item description:limit switch:      Noinner plate: metalSpindle:                    10mmbasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work is carried out:Revision of electronic and mechanical componentschange or Installation required componentsSetting and balancing the different speedsSetting and adjusting the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire turntableExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES installed in chromed stainless steel. The bottom is bolted to the frame and can be easily removed.Pickup Ortofon VM Alpha (included):With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Turntable:The turntable is made in five laborious and time-consuming steps polished to a high gloss. The mirror finish gives your turntable a unique look.With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured to original Thorens specifications (same material and dimensions).The following parts are as accessoriesuhright riseetcdaily and not component this auction:the following parts are available like accessories other not included in this auction:Hood: The hood is a new product (replica) with a wall thickness of 4mm, extremely stable, Plexiglas XT, absolutely colorless and clear, unbreakable to impact-resistant, weather-u. age-resistant, high-quality surface and planarity: 160XXL device feet (Picture 9-12):Solid stainless steel, height adjustable, total weight 2.5kg, diameter 65mm: 129Cartridge MM System including installation:Ortofon VM Red (bare elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata, boron cantilever): 899Cartridge MC System including installation: Audio-technica AT-OC9XML (Microlinear): 599Audio-technica AT-OC9XSH (Shibata): 699Audio-technica AT-OC9XSL (Special Line Contact): 799The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable Black Orange Sme 3009 Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time specified on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly assembled, modified and assembled by hand. Each of them is unique and differs in model, colour, veneer grain. The high-quality cases are restored or newly manufactured in qualified craftsmanship. Electrical components are checked, moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The customer receives a top-class device.Item description:limit switch:      Noinner plate: metalSpindle:                    10mmbasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work is carried out:Revision of electronic and mechanical componentschange or Installation required componentsSetting and balancing the different speedsSetting and adjusting the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire turntableExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES installed in chromed stainless steel. The bottom is bolted to the frame and can be easily removed.Pickup Ortofon VM Alpha (included):With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Turntable:The turntable is made in five laborious and time-consuming steps polished to a high gloss. The mirror finish gives your turntable a unique look.With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured to original Thorens specifications (same material and dimensions).The following parts are as accessoriesuhright riseetcdaily and not component this auction:the following parts are available like accessories other not included in this auction:Hood: The hood is a new product (replica) with a wall thickness of 4mm, extremely stable, Plexiglas XT, absolutely colorless and clear, unbreakable to impact-resistant, weather-u. age-resistant, high-quality surface and planarity: 160XXL device feet (Picture 9-12):Solid stainless steel, height adjustable, total weight 2.5kg, diameter 65mm: 129Cartridge MM System including installation:Ortofon VM Red (bare elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata, boron cantilever): 899Cartridge MC System including installation: Audio-technica AT-OC9XML (Microlinear): 599Audio-technica AT-OC9XSH (Shibata): 699Audio-technica AT-OC9XSL (Special Line Contact): 799The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Bei Selbstabholung 70,00 € Rabatt! Restaurierter Thorens TD125 MKII mit SME 3009 Series III Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt, modifiziert und montiert. Jeder von ihnen ist ein Unikat und unterscheidet sich in Modell, Farbe, Furnier-maserung. Die hochwertigen Gehäuse werden in qualifizierter Handwerksarbeit restauriert oder neu angefertigt. Elektrische Bauteile werden überpüft, beweglichen Teile geölt und Verschleißteile ausgetauscht. Einen abschließender Dauerlauftest runden die aufwendigen Arbeiten ab. Der Kunde erhält ein Gerät der Spitzenklasse. Artikelbeschreibung: Endabschaltung: NeinInnenteller: MetallSpindel: 10 mmGrundmaße: Breite: 525mm, Tiefe: 413mm, Höhe 97mm Folgende Arbeiten werden durchgeführt:Revision elektronischer und mechanischer BauteileUm- bzw. Einbau benötigten KomponentenEinstellung und Abgleich der verschiedenen GeschwindigkeitenEinstellung und Justierung der FederungÜberprüfung und Justierung des Tonarmes und des Tonabnehmers Gründliche Reinigung des gesamten PlattenspielersAusführung eines Dauerlauftestes Gehäuse: Das Gehäuse besteht aus 40mm Seitenteilen und einem 16 mm starken Boden aus MDF. Die Oberfläche wurde mit mehreren Farbschichten lackiert und anschließend mit Klarlack versiegelt. An der Rückseite befindet sich das Anschlusspanel für alle benötigten Kabel. Am Gehäuseboden sind vier höhenverstellbare Spikes aus verchromten Edelstahl installiert. Der Boden ist mit dem Rahmen verschraubt und kann leicht entfernt werden. Gerätefüße: Am Gehäuseboden sind vier höhenverstellbare SPIKES aus verchromten Edelstahl installiert. Der Boden ist mit dem Rahmen verschraubt und kann leicht entfernt werden. Tonabnehmer Ortofon VM Alpha (inklusive): Mit der VM-Serie hat Ortofon seit langem die Referenz MM-Tonabnehmer geschaffen, die lange Produktionszeit und der charakteristische Nadelkorpus sind auf der ganzen Welt ein Begriff. Das VM Alpha ist der Einstieg in die Serie und ist ein Super Einstiegssystem für Plattenspieler der mittleren Preislage.Die VM Reihe von Ortofon ist untereinander kompatibel. Sie können also mit einem VM Alpha starten und dann mit dem passenden Nadeleinschub die Qualität verbessern, indem Sie den nächst höheren Nadeleischub verwenden. Audiokabel: Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Plattenteller: In fünf aufwendigen und zeitintensiven Arbeitsschritten, wird der Plattenteller auf Hochglanz poliert. Die Hochglanzpolitur verleit Ihrem Plattenspieler ein einzigartiges Aussehen.Mit Oberflächenversiegelung durch eine spezielle Schutzlackierung, gegen wiederholtes Anlaufen und für einen langanhaltenden Glanz. Antriebsriemen: Dieser Antriebsriemen wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion:The following parts are available as accessories and not included in this auction: Haube: Die Haube ist eine Neuanfertigung (Nachbau) mit einer Wandstärke von 4mm, äußerst stabil, Plexiglas XT, absolut farblos und klar, bruchfest bis schlagzäh, witterungs-u. alterungsbeständig, hochqualitative Oberfläche und Planität: 160 XXL Gerätefüße (Bild 9-12): Edelstahl massiv, höhenverstellbar, Gesamtgewicht 2,5kg, Durchmesser 65mm: 129 Cartridge MM System including installation: Ortofon VM Red (nackter elliptischer Schliff): 199 Ortofon VM Silver (Nude Fritz Gyger 70-Schliff): 435 Ortofon 2M Red (elliptisch): 99 Ortofon 2M Blue (elliptisch, nackt): 199 Ortofon 2M Bronze (Fineline): 360 Ortofon 2M Black (Shibata): 599 Ortofon 2M Black LVB 250 (Shibata, Bor-Nadelträger): 899Cartridge MC System including installation: Audio-technica AT-OC9XML (Microlinear): 599 Audio-technica AT-OC9XSH (Shibata): 699Audio-technica AT-OC9XSL (Special Line Contact): 799

Hallo liebe Thorens Freunde, ich verkaufe hier die Thorens Sammlung von meinem Vater. Falls ich etwas falsch aufgeschrieben / aufgelistet habe, würde ich mich über eine nette Email freuen. Thorens High EndPlattenspieler TD 125 MK II mit Tonarm SME 3009 S2 Improved in einem dem Alter entsprechenden, sehr guten Zustand. Der TonabnehmerOrtofon Vinyl Master Tonabnehmer ist verbaut. Vinyl Master II Anschlusskabel. Dr. Fuss Netzteil. Der Plattenspieler ist in der Ausführung braunes Holz (Nussbaum). 1x Original Thorens Aufkleber aus den 80er Jahren gebe ich dazu. Kopie BedienungsanleitungVoll geserviced : Ölwechsel Tellerlager. Neuer Riemen (Original Thorens, nicht der günstige Thakker Riemen). Teller poliert. Tonabnehmer justiert, Plattenspieler eingestellt. Haube defekt (wird mitgeliefert), Haubenscharniere vollständig s. Fotos. Minimale Kratzer auf Metallrahmen. Technische DatenBaujahr 1972-1975Antrieb: RiemenMotor: 16-poliger Synchronmotor (AC)Drehzahl: 16, 33, 45 U/minGleichlaufschwankungen:Rumpelgeräuschabstand:Plattenteller: Zinkspritzguss, 300 mm, 3,2 kgBetriebsart: manuellPitch: ± 2%(Das sind die technische Daten, die ich bei HiFi-Wiki gefunden habe) Der Verkauf erfolgt unter Ausschluss jeglicher Gewährleistung. Keine Rücknahme. E45

Product:Record player turntableCondition:GoodProduct Details:Dimensions W 440 x H 120 x D 340mm Weight 14.5kgAccessories:Record players, weights, insulatorsPayment:Pyament within 3daysShipping: Japan Post & Fedex:7-20DaysInternational Buyers: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Return& Questions: For returns within 60 days, please explain and consult in advance. Any other questions will be answered within 48 hours.

SME 3009 series iii Tonearm. Comes with cables but no cartridge. Selling on behalf of my elderly neighbour who was a classical enthusiast and bought this new so is a one owner example. This came off a working Thorens table which has now been sold. Its in fantastic condition and will be well packaged or can be picked up from Kingston upon Thames KT1. I will be listing an early version 3009 unimproved along with some quad amps and various head shells, cartridges classical records and a Garrard 401 that also belonged to my neighbour. Any questions feel free to ask. Thanks

Description There are some minor scratches and cracks on the dust cover connection, but there are almost no noticeable marks or stains, and the record player remains in relatively clean condition for a record player of this age. All operations have been checked. All speeds are good, including 16, 33, and 45. The pitch control and strobe light are also good. The belt has been replaced with a new one, and all parts have been lubricated with oil, so it is ready for immediate use. Included are weights (very solid) and insulators. If you have any question or concern, please do not hesitate to contact me : ) ShippingStandard Shipping (FedEx, Japan Post)We usually ship out your order within 5-7 working days after receiving your payment.The package will arrive about 3 - 10 days after shipment.Pack carefully : ) International Buyers - Please Note?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. ?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.

Basetta Thorens 125/125 MKII per braccio SME 3009.(Color nero lucido) stata realizzata artigianalmente da una ditta specializzata nel lavorare il plexiglass con le specifiche di quello originale. Essendo un prodotto artigianale potrebbe presentare dei minimi difetti in zone non a vista. Allinterno dei fori per il braccio sono state applicate e incollate da sotto in fori ciechi, degli innesti filettati per avvitare il braccio con viti misura M3 di cui fornisco 4 unit.(Testa rotonda a passo esagonale) Fornisco inoltre 3 viti svasate e con la testa piatta a passo esagonale (come le originali) per fissare la basetta al giradischi e 4 rondelline. Tutte le vite e le rondelle sono in acciaio inox. PS: la superficie pu essere protetta da una pellicola che ovviamente va rimossa prima del montaggio Ritiro a mano o spedizione con corriere espresso pacco tracciabile ed adeguato imballo protettivo.

Colore Desiderato! Revisionato Thorens TD 125 MKII Giradischi Sme 3009 Serie IIILa descrizione di questo articolo è stata tradotta automaticamente. Se hai dubbi o domande, ti invitiamo a contattarci.Puoi scegliere tu stesso il colore dellalloggiamento, della piastra di copertura e della base del braccio.Puoi scegliere tu stesso il colore dellalloggiamento, della piastra di copertura e della base del braccio.Produzione individuale! Si prega di notare il tempo di elaborazione specificato su Ebay! Produzione individuale! Si prega di notare il tempo di elaborazione specificato su Ebay! Questo giradischi è disponibile in 220V/50Hz o 110V/60Hz (ad esempio Stati Uniti) Thorens TD125 MKII restaurato con SME 3009 Serie III I nostri giradischi sono accuratamente assemblati, modificati e assemblati a mano. Ognuno di essi è unico e si differenzia per modello, colore, venatura dellimpiallacciatura. Le custodie di alta qualità vengono restaurate o prodotte ex novo in maestria qualificata. I componenti elettrici vengono controllati, parti mobili oliate e parti soggette ad usura sostituite. Un ultimo test di resistenza completa il complesso lavoro. Il cliente riceve un dispositivo di prima classe.Descrizione dellarticolo:finecorsa:      NOpiatto interno: metalloMandrino:                    10 mmdimensioni base:             Larghezza: 525 mm, profondità: 413 mm, altezza 97 mmSi esegue il seguente lavoro:Revisione di componenti elettronici e meccaniciordine o Componenti richiesti per linstallazioneImpostazione e bilanciamento delle diverse velocitàImpostazione e regolazione della sospensioneControllo e regolazione del braccio e della testina Pulizia accurata dellintero piatto girevoleEsecuzione di una prova di resistenzaAbitazione:Dipinto nel colore desiderato!Lalloggiamento è costituito da pannelli laterali da 40 mm e una base in MDF spessa 16 mm. È dipinto con diversi strati di vernice e poi sigillato con vernice trasparente. Il pannello di connessione per tutti i cavi necessari si trova sul retro. Sul fondello sono installate quattro punte regolabili in altezza in acciaio inossidabile cromato. Il fondo è imbullonato al telaio e può essere facilmente rimosso.coperchio:La piastra di copertura è verniciata nel colore desiderato!Base del braccio:La base del braccio è verniciata nel colore desiderato!Piedi del dispositivo:Ce ne sono quattro regolabili in altezza sul fondo della custodia PUNTE installato in acciaio inossidabile cromato.Ritiro Ortofon VM Alpha (incluso):Con la serie VM, Ortofon ha da tempo creato il pickup MM di riferimento, i lunghi tempi di produzione e il caratteristico corpo della puntina sono ben noti in tutto il mondo. Il VM Alpha è lingresso nella serie ed è un sistema super entry-level per giradischi di fascia media.La serie VM di Ortofon è compatibile tra loro. Quindi puoi iniziare con un VM Alpha e quindi migliorare la qualità con lo slot dellago appropriato utilizzando lo slot dellago immediatamente superiore.Cavo audio:cavo di marca. Cavo cinch audio analogico già pronto per il cablaggio dei giradischi! Grazie al conduttore interno particolarmente pregiato in rame privo di ossigeno (OFC), questo cavo di qualità garantisce una trasmissione naturale del segnale. La sicurezza dei contatti e la protezione dalla corrosione sono garantite dai contatti a spina placcati oro 24 carati. Il cavo ha un suono neutro con una buona dinamica e spazialità.Giradischi:Il giradischi è realizzato in cinque passaggi laboriosi e dispendiosi in termini di tempo lucidato a specchio. La finitura a specchio conferisce al tuo giradischi un aspetto unico.Con sigillatura della superficie mediante uno speciale rivestimento protettivo contro lossidazione ripetuta e per una brillantezza di lunga durata. Cintura di sicurezza:Questa cinghia di trasmissione è prodotta secondo le specifiche originali Thorens (stesso materiale e dimensioni). --Il seguente parti Sono COME AccessoriuhGiusto salitaecceteraquotidiano E non componente Questo asta:IL seguente parti Sono disponibile Piace Accessori altro non incluso In Questo asta:Piedi del dispositivo:Regolabile in altezza, realizzato in acciaio inossidabile. La superficie di contatto con la base è ridotta al minimo da 3 tamponi in gomma.La risonanza e il feedback vengono così efficacemente prevenuti.Cartuccia MM System inclusa linstallazione: Cartuccia Sistema MC inclusa installazione: Lalloggiamento è costituito da pannelli laterali da 40 mm e una base in MDF spessa 16 mm. È dipinto con diversi strati di vernice e poi sigillato con vernice trasparente. Il pannello di connessione per tutti i cavi necessari si trova sul retro. Sul fondello sono installate quattro punte regolabili in altezza in acciaio inossidabile cromato. Il fondo è imbullonato al telaio e può essere facilmente rimosso. cavo di marca. Cavo cinch audio analogico già pronto per il cablaggio dei giradischi! Grazie al conduttore interno particolarmente pregiato in rame privo di ossigeno (OFC), questo cavo di qualità garantisce una trasmissione naturale del segnale. La sicurezza dei contatti e la protezione dalla corrosione sono garantite dai contatti a spina placcati oro 24 carati. Il cavo ha un suono neutr Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Desired Color! Revised Thorens TD 125 MKII Turntable Sme 3009 Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing, the cover plate and the tonearm base yourself.You can choose the color of the housing, the cover plate and the tonearm base yourself.Individual production! Please note the processing time specified on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly assembled, modified and assembled by hand. Each of them is unique and differs in model, colour, veneer grain. The high-quality cases are restored or newly manufactured in qualified craftsmanship. Electrical components are checked, moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The customer receives a top-class device.Item description:limit switch:      Noinner plate: metalSpindle:                    10mmbasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work is carried out:Revision of electronic and mechanical componentschange or Installation required componentsSetting and balancing the different speedsSetting and adjusting the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire turntableExecution of an endurance testHousing:Painted in your desired color!The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed.cover plate:The cover plate is painted in your desired color!Tonearm base:The tonearm base is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES installed in chromed stainless steel.Pickup Ortofon VM Alpha (included):With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Turntable:The turntable is made in five laborious and time-consuming steps polished to a high gloss. The mirror finish gives your turntable a unique look.With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured to original Thorens specifications (same material and dimensions). --The following parts are as accessoriesuhright riseetcdaily and not component this auction:the following parts are available like accessories other not included in this auction:Device feet:Height adjustable, made of stainless steel. The contact surface to the base is reduced to a minimum by 3 rubber buffers.Resonance and feedback are thus effectively prevented.Cartridge MM System including installation: Cartridge MC System including installation: The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copp Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Sie können die Farbe des Gehäuses, der Deckplatte und der Tonarmbasis selber auswählen.You can choose the color of the housing, the cover plate and the tonearm base yourself. Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Bei Selbstabholung 70,00 € Rabatt! Restaurierter Thorens TD125 MKII mit SME 3009 Series III Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt, modifiziert und montiert. Jeder von ihnen ist ein Unikat und unterscheidet sich in Modell, Farbe, Furnier-maserung. Die hochwertigen Gehäuse werden in qualifizierter Handwerksarbeit restauriert oder neu angefertigt. Elektrische Bauteile werden überpüft, beweglichen Teile geölt und Verschleißteile ausgetauscht. Einen abschließender Dauerlauftest runden die aufwendigen Arbeiten ab. Der Kunde erhält ein Gerät der Spitzenklasse. Artikelbeschreibung: Endabschaltung: NeinInnenteller: MetallSpindel: 10 mmGrundmaße: Breite: 525mm, Tiefe: 413mm, Höhe 97mm Folgende Arbeiten werden durchgeführt:Revision elektronischer und mechanischer BauteileUm- bzw. Einbau benötigten KomponentenEinstellung und Abgleich der verschiedenen GeschwindigkeitenEinstellung und Justierung der FederungÜberprüfung und Justierung des Tonarmes und des Tonabnehmers Gründliche Reinigung des gesamten PlattenspielersAusführung eines Dauerlauftestes Gehäuse: Lackierung in Ihrer Wunschfarbe! Das Gehäuse besteht aus 40mm Seitenteilen und einem 16 mm starken Boden aus MDF. Es wird mit mehreren Farbschichten lackiert und anschließend mit Klarlack versiegelt. An der Rückseite befindet sich das Anschlusspanel für alle benötigten Kabel. Am Gehäuseboden sind vier höhenverstellbare Spikes aus verchromten Edelstahl installiert. Der Boden ist mit dem Rahmen verschraubt und kann leicht entfernt werden. Deckplatte: Die Deckplatte wird in Ihrer Wunschfarbe lackiert! Tonarmbasis: Die Tonarmbasis wird in Ihrer Wunschfarbe lackiert! Gerätefüße: Am Gehäuseboden sind vier höhenverstellbare SPIKES aus verchromten Edelstahl installiert. Tonabnehmer Ortofon VM Alpha (inklusive): Mit der VM-Serie hat Ortofon seit langem die Referenz MM-Tonabnehmer geschaffen, die lange Produktionszeit und der charakteristische Nadelkorpus sind auf der ganzen Welt ein Begriff. Das VM Alpha ist der Einstieg in die Serie und ist ein Super Einstiegssystem für Plattenspieler der mittleren Preislage.Die VM Reihe von Ortofon ist untereinander kompatibel. Sie können also mit einem VM Alpha starten und dann mit dem passenden Nadeleinschub die Qualität verbessern, indem Sie den nächst höheren Nadeleischub verwenden. Audiokabel: Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Plattenteller: In fünf aufwendigen und zeitintensiven Arbeitsschritten, wird der Plattenteller auf Hochglanz poliert. Die Hochglanzpolitur verleit Ihrem Plattenspieler ein einzigartiges Aussehen.Mit Oberflächenversiegelung durch eine spezielle Schutzlackierung, gegen wiederholtes Anlaufen und für einen langanhaltenden Glanz. Antriebsriemen: Dieser Antriebsriemen wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. ----------------------------------------------------------------------------------------------------------------------- Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion:The following parts are available as accessories and not included in this auction: Haube zum Auflegen auf das Gehäuse: 160 € Gerätefüße: Höhenverstellbar, aus Edelstahl. Die Kontaktfläche zur Unterlage wird durch 3 Gummipuffer auf ein Minimum reduziert.Resonanzen und Rückkopplungen werden somit effektiv verhindert. XL (siehe Bild 11 und 12): 84 € XXL (siehe Bild 9 und 10): 130 € Cartridge MM System including installation: Ortofon VinylMaster Red (nackter elliptischer Schliff): 220 € Ortofon VinylMaster Blue (nude Fineline-Schliff): 330 € Ortofon VinylMaster Silver (nude Fritz Gyger 70-Schliff): 470 € Ortofon 2MRed (elliptisch): 99 € Ortofon 2M Blue (Diamantschliff): 220 € Ortofon 2M Bronze (Fineline-Diamantschliff): 390 € Ortofon 2M Black (Shibata-Diamantschliff): 599 € Ortofon 2M Black LVB 250 (Shibata-Diamantschliff): 945 € audio-technica VM740ML Dual MM (Microlinear-Nadel): 339 € audio-technica VM750SH Dual MM (Shibata-Nadel): 439 € audio-technica VM760SLC Dual MM (Special-Line-Contact): 699 € Cartridge MC System including installation: audio-technica AT-OC9XML Dual MC (Microlinear-Nadel): 599 € audio-technica AT-OC9XSH Dual MC (Shibata Nadelschliff): 699 € audio-technica AT-OC9XSL Dual MC (Special-Line-Contact): 799 €