Description
Technics SE-A5 Stereo Power Amplifier JUNK From JapanDescriptionType Stereo power amplifierRated Output (20Hz to 20kHz)full: 160W+160W (into 4 ohms, 0.003%)120W+120W(8ohm, 0.002%)When limited: 40W+40W (4 ohms, 0.003%)30W+30W(8ohm, 0.002%)Total Harmonic DistortionAt rated output: 0.003% (20Hz to 20kHz, 4?)0.002% (20Hz to 20kHz, 8?)At -3dB rated output: 0.001% (20Hz to 20kHz, 8?)0.0005%(1kHz, 8ohm)TIM Not measurablePower bandwidth 5Hz to 100kHz (THD 0.007%)Frequency Response DC to 20kHz +0 -0.1dBDC to 200kHz +0 -3dBSN ratio 123dBResidual noise 100?VDamping factor 140 (8?)Load Impedance Main or Remote: 4? to 16?Main & Remote: 8? to 16?Input sensitivity/impedance 1V/47k?Output meter indication range 0.0001W to 300W-60dB to +5dBPower supply voltage AC100V, 50Hz/60HzPower consumption full: 330WWhen limited: 100WDimensions Width 430 x Height 178 x Depth 416mmWeight 18.4kg Stereo power amplifier inheriting the philosophy and quality of the SE-A1 and SE-A3 and further incorporating a linear feedback circuit. The new Class A system, consisting of a synchronous bias circuit and concentrated power block, is newly equipped with a linear feedback circuit.This circuit was developed using the best of multiple feedback circuit technology, forming an independent periodic circuit in the NFB loop that enables amplifiers to have a bare amplification level of ?. Theoretical values include zero distortion, pure gain without the influence of elements or power supplies, and speaker drive without the influence of back EMFs or wires. A synchronous bias circuit is provided to supply a constant bias to the + and - output transistors, which are alternately deactivated in class-B operation, in synchronization with the deactivation cycle, so that the output stage is always active and switching distortion is eliminated.Furthermore, since the signal path and bias current path are independent, the output stage maintains the proper operating point, and coupled with the function of the high-speed diode with square characteristics, crossover distortion is eliminated. The output stage and power supply section are integrated in a clever configuration to adopt a concentrated power block that fundamentally eliminates the adverse effects of electromagnetic fields.Furthermore, the use of highly shielded magnetic materials in the chassis and covers suppresses external induction. Four 10,000?F electrolytic capacitors are used in the power supply section. A switch is provided to switch between full (120W+120W) and limited (30W+30W) output, allowing the user to enjoy driving the 30W output with a huge power supply with plenty of margin, such as when the surroundings are quiet.When limited is selected, the meter illumination is also turned off, resulting in low power consumption. A purely electronic protection circuit is provided, which disconnects the speaker by a relay if a DC component is generated at the speaker terminals.This circuit also operates to protect the amplifier in the event of a short circuit or abnormally low impedance load on the speaker terminals. A large power meter is provided for direct reading from 0.0001W to 300W without range switching.The response conforms to the BTS standard VU meter characteristics.Shipping FedEx?or DHLInternational Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.
Live search