This is a used pair of the very fine and very expensive (when produced) and very rare Technics SB-7000A speakers, made in 1978. They are true linear phase design speakers and their sound is incredible across all ranges and frequencies. The list price in 1978 was $800. That is $3700 in todays dollars. You would be very hard pressed to find a pair of these in better shape physically and sonically. I had the crossover boards re-capped by an expert some time back. I just had the woofers professionally re-foamed by the great Midwest Speaker Repair shop in Roseville, MN. The total cost (with substantial shipping cost both ways) was a little over $200. They done a super job. The speakers just sound absolutely fantastic now.They also replaced the dust covers over the woofer drivers.They did have some light glue smudges resulting from their work, but it is only a surface issue on the woofers. I pictured those smudges. But of course the woofers are not even seen with the covers on them. The 4 covers are in super overall shape, especially considering their 45 year age. Some specs: 7000A Type: 3 way, 3 driver loudspeaker system Frequency Response: 37Hz to 22kHz Power Handling: 100W Crossover Frequency: 700, 6000Hz Impedance: 6? Sensitivity: 90.5dB Bass: 1 x 14 inch woofer Midrange: 1 x 5 inch cone Tweeter: 1 x 32mm dome tweeter Enclosure: bass reflex Dimensions: 19 inches wide x 33 inches high x 16 inches deepWeight: 73 lbs. Note they are 6 ohm speakers so make sure your amplifier is rated to handle such.Also note the are 73 lbs each and BIG, so shipping is pretty much out of the question. I have two owners manuals, each serial-numbered to each speaker. I would be happy and proud to show you what they can do if you wish to come look and listen to them. I would not think of selling them, but I have decided to sell my house, my estate, and most of my belongings and move to SE Asia. They HAVE to be picked up locally in Booneville, Arkansas, 35 miles SE of Fort Smith. Feel free to ask me any questions. Thank you for looking! GOD SAVE AMERICA.

OFFERED BY HIGH FIDELITY- DESCRIPTION- PAPER CONE, FOAM SURROUNDBRAND- TECHNICSMODEL- SB-7000APART#- EAS-35PL05SESIZE- APPROX. 14.5 OD ( AT BUMP-OUTS) X 5.25DCONDITION- VERY GOOD 8/10RESISTANCE (METER) - 5.4 OHMRESISTANCE (RATED)- ASSUMED 8 OHMQTY- 1 EAIF THERE ARE MULTIPLES OF THIS ITEM, THE ONE YOU RECEIVE MAY DIFFER SLIGHTLY FROM THE ONE SHOWN IN PICTURES, BUT IS THE SAME PART AND IN EQUAL OR BETTER CONDITION. PLEASE ASK QUESTIONS BEFORE BUYING. NO WARRANTY OR RETURNS. THANK YOU!IN VERY GOOD, USED CONDITION. VERY CLEAN, ORIGINAL SURROUND IN GOOD CONDITION. FULLY TESTED, SOUND NICE. ALL OF THE ITEMS I SELL ARE TESTED AS THOROUGHLY AS I KNOW HOW TO. ALL ITEMS ARE CLEANED AS GOOD AS POSSIBLE TO ENSURE A PRODUCT THAT IS READY TO USE. BECAUSE OF THE NATURE OF SOME OF THE PRODUCTS I OFFER, SOME CANT BE CLEANED AS GOOD AS OTHERS, BUT I TRY TO NOTE THIS IN THE DESCRIPTION. BECAUSE OF THE AGE AND/OR USED CONDITION OF ITEMS BEING SOLD, NO WARRANTIES ARE OFFERED. PLEASE ASK QUESTIONS BEFORE BUYING TO CLEAR UP ANY CONCERNS BEFORE PURCHASING. ALL SHIPPING PRICES ARE FOR CONTINENTAL UNITED STATES ONLY, ALL INTERNATIONAL SHIPPING IS HANDLED THROUGH THE EBAY GLOBAL SHIPPING PROGRAM ONLY. I WILL SHIP TO OTHER US REGIONS ( ALASKA, HAWAII, PUERTO RICO), PLEASE ASK FOR SHIPPING QUOTE FIRST. THANK YOU! SHIPPING- I SHIP TWICE A WEEK, AT THE BEGINNING AND END OF THE WORK WEEK. I DO NOT SHIP ON WEEKENDS. IF YOU NEED AN ITEM SHIPPED QUICKLY, PLEASE ASK ME BEFORE PURCHASING TO MAKE SURE I CAN ACCOMODATE YOU, OTHERWISE, YOUR ITEM WILL GO OUT WITHIN 2-3 BUSINESS DAYS 90% OF THE TIME. LARGER ITEMS MAY TAKE A LITTLE EXTRA TIME TO PROPERLY PACKAGE. THANKS FOR YOUR UNDERSTANDING. FEEDBACK- I WILL LEAVE FEEDBACK AS SOON AS POSITIVE FEEDBACK IS RECEIVED. I WILL NOT ACCEPT RETURNS UNLESS AN ITEM IS NOT AS DESCRIBED. I TRY TO DESCRIBE MY ITEMS AS BEST AS I CAN, SO PLEASE STUDY PICTURES AND ASK QUESTIONS BEFORE BUYING. I WONT ACCEPT RETURNS DUE TO BUYERS REMORSE. PLEASE CONTACT ME IF YOU HAVE AN ISSUE BEFORE LEAVING NEGATIVE FEEDBACK OR OPENING A CASE, I WILL WORK WITH YOU TO RESOLVE THE ISSUE. IF AN ITEM IS DAMAGED DURING SHIPPING, PLEASE CONTACT ME AND I WILL HELP GET IT TAKEN CARE OF. YOU WILL NEED TO BE INVOLVED IN THIS PROCESS IF IT HAPPENS THOUGH. IT HAS ONLY HAPPENED A HANDFUL OF TIMES IN MANY YEARS OF DOING THIS, JUST BE AWARE IT CAN HAPPEN. THANK YOU!

This is a used pair of the very fine and very expensive (when produced) and very rare Technics SB-7000A speakers, made in 1978. They are true linear phase design speakers and their sound is incredible across all ranges and frequencies. The list price in 1978 was $800. That is $3700 in todays dollars. You would be very hard pressed to find a pair of these in better shape physically and sonically. I had the crossover boards re-capped by an expert some time back. I just had the woofers professionally re-foamed by the great Midwest Speaker Repair shop in Roseville, MN. The total cost (with substantial shipping cost both ways) was a little over $200. They done a super job. The speakers just sound absolutely fantastic now.They also replaced the dust covers over the woofer drivers.They did have some light glue smudges resulting from their work, but it is only a surface issue on the woofers. I pictured those smudges. But of course the woofers are not even seen with the covers on them. The 4 covers are in super overall shape, especially considering their 45 year age. Some specs: 7000A Type: 3 way, 3 driver loudspeaker system Frequency Response: 37Hz to 22kHz Power Handling: 100W Crossover Frequency: 700, 6000Hz Impedance: 6? Sensitivity: 90.5dB Bass: 1 x 14 inch woofer Midrange: 1 x 5 inch cone Tweeter: 1 x 32mm dome tweeter Enclosure: bass reflex Dimensions: 19 inches wide x 33 inches high x 16 inches deepWeight: 73 lbs. Note they are 6 ohm speakers so make sure your amplifier is rated to handle such.Also note the are 73 lbs each and BIG, so shipping is pretty much out of the question. I have two owners manuals, each serial-numbered to each speaker. I would be happy and proud to show you what they can do if you wish to come look and listen to them. I would not think of selling them, but I have decided to sell my house, my estate, and most of my belongings and move to SE Asia. They HAVE to be picked up locally in Booneville, Arkansas, 35 miles SE of Fort Smith. Feel free to ask me any questions. Thank you for looking! GOD SAVE AMERICA.

This is a used pair of the very fine and very expensive (when produced) and very rare Technics SB-7000A speakers, made in 1978. They are true linear phase design speakers and their sound is incredible across all ranges and frequencies. The list price in 1978 was $800. That is $3700 in todays dollars. You would be very hard pressed to find a pair of these in better shape physically and sonically. I had the crossover boards re-capped by an expert some time back. I just had the woofers professionally re-foamed by the great Midwest Speaker Repair shop in Roseville, MN. The total cost (with substantial shipping cost both ways) was a little over $200. They done a super job. The speakers just sound absolutely fantastic now.They also replaced the dust covers over the woofer drivers.They did have some light glue smudges resulting from their work, but it is only a surface issue on the woofers. I pictured those smudges. But of course the woofers are not even seen with the covers on them. The 4 covers are in super overall shape, especially considering their 45 year age. Some specs: 7000A Type: 3 way, 3 driver loudspeaker system Frequency Response: 37Hz to 22kHz Power Handling: 100W Crossover Frequency: 700, 6000Hz Impedance: 6? Sensitivity: 90.5dB Bass: 1 x 14 inch woofer Midrange: 1 x 5 inch cone Tweeter: 1 x 32mm dome tweeter Enclosure: bass reflex Dimensions: 19 inches wide x 33 inches high x 16 inches deepWeight: 73 lbs. Note they are 6 ohm speakers so make sure your amplifier is rated to handle such.Also note the are 73 lbs each and BIG, so shipping is pretty much out of the question. I have two owners manuals, each serial-numbered to each speaker. I would be happy and proud to show you what they can do if you wish to come look and listen to them. I would not think of selling them, but I have decided to sell my house, my estate, and most of my belongings and move to SE Asia. They HAVE to be picked up locally in Booneville, Arkansas, 35 miles SE of Fort Smith. Feel free to ask me any questions. Thank you for looking! GOD SAVE AMERICA.

GS Audio Inc. is not the owner or seller of these goods, but merely a bailee acting on behalf of the seller to facilitate the sale of the goods by holding the goods until such time as a sale is completed and the goods are shipped to the buyer. GS Audio Inc. has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type, condition and image of the goods at the time of sale. GS Audio Inc. makes no express or implied warranties or representations regarding the condition or suitability of the goods and to the extent allowed by law, specifically disclaims any express or implied warranties, including but not limited to any warranty of merchantability or fitness for purpose. GS Audio Inc. reserves the right to cancel bids on any item due to feedback. This Listing Powered By

This is a used pair of the very fine and very expensive (when produced) and very rare Technics SB-7000A speakers, made in 1978. They are true linear phase design speakers and their sound is incredible across all ranges and frequencies. The list price in 1978 was $800. That is $3700 in todays dollars. You would be very hard pressed to find a pair of these in better shape physically and sonically. I had the crossover boards re-capped by an expert some time back. I just had the woofers professionally re-foamed by the great Midwest Speaker Repair shop in Roseville, MN. The total cost (with substantial shipping cost both ways) was a little over $200. They done a super job. The speakers just sound absolutely fantastic now.They also replaced the dust covers over the woofer drivers.They did have some light glue smudges resulting from their work, but it is only a surface issue on the woofers. I pictured those smudges. But of course the woofers are not even seen with the covers on them. The 4 covers are in super overall shape, especially considering their 45 year age. Some specs: 7000A Type: 3 way, 3 driver loudspeaker system Frequency Response: 37Hz to 22kHz Power Handling: 100W Crossover Frequency: 700, 6000Hz Impedance: 6? Sensitivity: 90.5dB Bass: 1 x 14 inch woofer Midrange: 1 x 5 inch cone Tweeter: 1 x 32mm dome tweeter Enclosure: bass reflex Dimensions: 19 inches wide x 33 inches high x 16 inches deepWeight: 73 lbs. Note they are 6 ohm speakers so make sure your amplifier is rated to handle such.Also note the are 73 lbs each and BIG, so shipping is pretty much out of the question. I have two owners manuals, each serial-numbered to each speaker. I would be happy and proud to show you what they can do if you wish to come look and listen to them. I would not think of selling them, but I have decided to sell my house, my estate, and most of my belongings and move to SE Asia. They HAVE to be picked up locally in Booneville, Arkansas, 35 miles SE of Fort Smith. Feel free to ask me any questions. Thank you for looking! GOD SAVE AMERICA.

...MY0121 FROM A SMOKE FREE HOME HI-FI NEWS FULL REVIEWS AND CONTENTS .ABOVE MUSIC REVIEWS AND QUESTION AND ANSWERS HI-FI NEWS - PS AUDIO - MARK LEVINSON - MARANTZ - ROTEL - TECHNICS - KEF - B&W HI-FI NEWS - KEF REFERENCE 7 Q-UBE - TECHNICS SB-7000 - PS AUDIO - LEVINSON - B&W

This is a used pair of the very fine and very expensive (when produced) and very rare Technics SB-7000A speakers, made in 1978. They are true linear phase design speakers and their sound is incredible across all ranges and frequencies. The list price in 1978 was $800. That is $3700 in todays dollars. You would be very hard pressed to find a pair of these in better shape physically and sonically. I had the crossover boards re-capped by an expert some time back. I just had the woofers professionally re-foamed by the great Midwest Speaker Repair shop in Roseville, MN. The total cost (with substantial shipping cost both ways) was a little over $200. They done a super job. The speakers just sound absolutely fantastic now.They also replaced the dust covers over the woofer drivers.They did have some light glue smudges resulting from their work, but it is only a surface issue on the woofers. I pictured those smudges. But of course the woofers are not even seen with the covers on them. The 4 covers are in super overall shape, especially considering their 45 year age. Some specs: 7000A Type: 3 way, 3 driver loudspeaker system Frequency Response: 37Hz to 22kHz Power Handling: 100W Crossover Frequency: 700, 6000Hz Impedance: 6? Sensitivity: 90.5dB Bass: 1 x 14 inch woofer Midrange: 1 x 5 inch cone Tweeter: 1 x 32mm dome tweeter Enclosure: bass reflex Dimensions: 19 inches wide x 33 inches high x 16 inches deepWeight: 73 lbs. Note they are 6 ohm speakers so make sure your amplifier is rated to handle such.Also note the are 73 lbs each and BIG, so shipping is pretty much out of the question. I have two owners manuals, each serial-numbered to each speaker. I would be happy and proud to show you what they can do if you wish to come look and listen to them. I would not think of selling them, but I have decided to sell my house, my estate, and most of my belongings and move to SE Asia. They HAVE to be picked up locally in Booneville, Arkansas, 35 miles SE of Fort Smith. Feel free to ask me any questions. Thank you for looking! GOD SAVE AMERICA.

This is a used pair of the very fine and very expensive (when produced) and very rare Technics SB-7000A speakers, made in 1978. They are true linear phase design speakers and their sound is incredible across all ranges and frequencies. The list price in 1978 was $800. That is $3700 in todays dollars. You would be very hard pressed to find a pair of these in better shape physically and sonically. I had the crossover boards re-capped by an expert some time back. I just had the woofers professionally re-foamed by the great Midwest Speaker Repair shop in Roseville, MN. The total cost (with substantial shipping cost both ways) was a little over $200. They done a super job. The speakers just sound absolutely fantastic now.They also replaced the dust covers over the woofer drivers.They did have some light glue smudges resulting from their work, but it is only a surface issue on the woofers. I pictured those smudges. But of course the woofers are not even seen with the covers on them. The 4 covers are in super overall shape, especially considering their 45 year age. Some specs: 7000A Type: 3 way, 3 driver loudspeaker system Frequency Response: 37Hz to 22kHz Power Handling: 100W Crossover Frequency: 700, 6000Hz Impedance: 6? Sensitivity: 90.5dB Bass: 1 x 14 inch woofer Midrange: 1 x 5 inch cone Tweeter: 1 x 32mm dome tweeter Enclosure: bass reflex Dimensions: 19 inches wide x 33 inches high x 16 inches deepWeight: 73 lbs. Note they are 6 ohm speakers so make sure your amplifier is rated to handle such.Also note the are 73 lbs each and BIG, so shipping is pretty much out of the question. I have two owners manuals, each serial-numbered to each speaker. I would be happy and proud to show you what they can do if you wish to come look and listen to them. I would not think of selling them, but I have decided to sell my house, my estate, and most of my belongings and move to SE Asia. They HAVE to be picked up locally in Booneville, Arkansas, 35 miles SE of Fort Smith. Feel free to ask me any questions. Thank you for looking! GOD SAVE AMERICA.

Original Technics SB-7000a Crossover Work Condition ? (2).

Technics SB-7000 user manual original Normale Gebrauchsspuren. Privat, keine Rücknahme oder Garantie. Versand als Brief mit Sendungsverfolgung

Casse Acustiche Vintage Technics SB-7000 completamente restaurate.tutti i componenti originali tranne i jack a banana di ultima generazione (comunque disponibili i vecchi attacchi)

Casse Acustiche Vintage Technics SB-7000 completamente restaurate.tutti i componenti originali tranne i jack a banana di ultima generazione (comunque disponibili i vecchi attacchi)