Technics EPC-100C Stereo MM Moving Magnet Cartridge Phono Pick-up Vintage #3 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, dullness, dirt, etc. due to normal use. There is a crack on the needle cover, see the 4th photo. Of course, it does not affect the sound quality. Specifications Type: MM CartridgeFrequency Response: 20Hz?10kHz ±0.3dB10Hz to 50kHzOutput voltage: 1.5mVChannel Separation: 25dB(1kHz)20dB(10kHz)Impedance: 210?(1kHz)Needle Pressure Range: 1.25g ±0.25gNeedle tip: 0.2x0.7mil elliptical needle0.1mm square block diamond tipDead weight: 19g (shell integrated shape)Replacement needle: EPS-100ED Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Brand New Full Technics Warranty Manufacturers Description: The Latest Coreless Direct Drive Motor Achieves High-precision Stable RotationThe technologies acquired through the development of the SL-1200 Series and the high-end SL-1000R model were lavishly inserted into the motor drive unit, a key part of the turntable. The motor exclusively tunes the single-rotor, coreless direct drive motor adopted by the SL-1200GR in order to read the high rotation accuracy and high-precision signals of the record. Optimal motor control is conducted for the inertial mass of the two-layer structure platter on which the vinyl record is placed with deadening rubber on the entire back surface to eliminate unwanted resonance in the aluminium die-cast platter to eliminate the rotation irregularity called cogging. Accurately Reads Signals from the Groove on the RecordThe tonearm is a static-balance universal S-shape tonearm, another Technics tradition. By adopting a high-precision bearing using the same gimbal suspension construction and machined housing as the SL-1200 Series, high initial sensitivity is achieved. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS-mixed with glass fiber to achieve a two-layer construction. The insulator is comprised of a spring and rubber to provide optimal vibration-damping characteristics. Equipped with Audiophile-Grade CartridgeThe SL-100C comes preinstalled with an Audio-Technica AT-VM95C cartridge, so you can listen to your favorite tunes in high fidelity with minimal set up. The tone arm height can be easily adjusted within a range of 6 mm, enabling the use of various other phono cartridges. Auto Lifter Minimises Wear on Records and StylusWhen the tonearm reaches the end of the record, the Auto Lifter function automatically raises the cartridge. This prevents unnecessary wear on your valuable vinyl records and stylus. By embedding the Auto Lifter function in the base portion of the tonearm, it eliminates impacts to the tonearm. Due to a simple design that doesn’t use motor power, there is no electrical or vibrational impact and it will not prevent the movement of the tonearm. In response to requests from many users regarding the Auto Lifter function, a design that prioritises sound quality was adopted. The functions required to playback records were kept to a bare minimum, achieving simple and easy-to-use operability. Designed for Functional BeautyThe SL-100C sports a simplistic visual design without unnecessary frills, while retaining the high quality operational feel that is a Technics tradition. Its elegant minimalist appearance will enhance your listening experience. Whats In The Box:SL-100CEB-K TurntableTurntable sheetDust coverEP record adaptorBalance weightHead shellCartridge (Audio-Technica AT-VM95C)PHONO cablePHONO earth leadAC power supply cordOwners Manual Listing and template services provided by inkFrog

This Technics SL-100C Direct Drive Turntable is the perfect addition to any home audio system. With its sleek black color and brand new condition, this turntable is sure to impress. Featuring an overhang of 15 mm and a power consumption of 8 W (approx. 0.2 W standby), this turntable is both powerful and energy-efficient. In addition to its impressive design, the Technics SL-100C also boasts a variety of features such as a PHONO output (Pin Jack) and EARTH TERMINAL output, making it easy to connect to any audio system. Whether youre a vinyl enthusiast or just looking for a high-quality turntable, the Technics SL-100C is a great choice.

New $1,099. Includes a new Audio-Technica AT-95EX elliptical cartridge, an upgrade over the standard VM95C with basic conical stylus. The original mat and several accessories are still sealed and were never used. Ships in original box with all original packaging. Product page: https://us.technics.com/products/direct-drive-turntable-sl-100c Enter the real vinyl culture with the Technics SL-100C Premium Class Turntable System. Using technologies acquired through the development of the SL-1200 Series and the Reference Class flagship SL-1000R, the SL-100C uses the latest coreless direct drive brushless DC motor provides high-level accuracy in rotation and signal for smooth, stable playback. With an interchangeable pre-installed cartridge, auto-lift function and high-quality, elegant design, the SL-100C is true a hallmark of the Technics tradition. Coreless direct drive brushless DC motor, achieves stable rotation that is free from coggingHighly sensitive S-shaped aluminum tonearm accurately reads record groovesHigh-rigidity cabinet and high-damping insulator for thorough shut-out of vibrations, ensuring a smooth vinyl-tracking processPre-installed Audio-Technica AT-VM95C pickup cartridge for easy setup; interchangeable for upgradesAuto-lift tonearm minimizes needle wear-out and preserves records

This Technics SL-100C turntable is a premium class record player that will elevate your listening experience to new heights. With its sleek design and exceptional performance, it is the perfect addition to any home audio setup. Featuring high-quality components and advanced features, this turntable delivers crystal-clear sound that is sure to impress even the most discerning audiophile. Whether you're spinning your favorite vinyl records or streaming music from your digital devices, this turntable is up to the task. Invest in the ultimate listening experience with the Technics SL-100C turntable. The dust cover has some minor scuffing but overall is in very good working condition. I am the original owner and have only had for two months. I have multiple turntables, and I am getting more into the digital side of music, I have begun collecting cds, so for the listening I will be doing I will no longer need a turntable of this quality it will just be going to waste. Thank you for looking at my listing.

PaymentRest assured that our store offers a variety of payment methods.Please pay within 5 days after auction is finished. About UsWe are located in Japan.For electrical products check the manufacturer and product and convert to the voltage of each country.We plan to ship by FedEx or DHL.Please contact us as the shipping fee can be changed in some cases. Its our pleasure to make you happy by proposing our recommend item.If you have any questions or request about items please feel free to ask us. International Buyers - Please Note:-Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.-Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.-These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.-We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior.>

Technics EPC-100C MK2 Stereo MM Moving Magnet Cartridge Phono Pick-up Vintage Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, dullness, dirt, etc. due to normal use. For other appearances, please refer to the photo. Overview Pure boron cantilever is used for the cantilever. This material, which is difficult to make into a solid bar, is refined into a pipe shape by a special manufacturing process to achieve light weight and high strength. Furthermore, a laser beam is used to process the tip mount hole for mounting the needle tip tip in pursuit of precision, resulting in an extremely small effective mass of the resonator and pushing the high frequency resonance frequency out of the audible range. The TTDD (Technics Temperature Defense Damper) developed by Technics is used. Compared to commonly used butyl rubber, this damper material has about 1/3 of the temperature dependence, and has excellent viscoelasticity and excellent cantilever support performance. As a result, there is almost no deterioration in sound quality and tracing performance due to temperature changes in the room. In the magnetic circuit, mirror-polished HPF cores are used for all magnetic materials such as pole pieces and yokes to obtain excellent transmission characteristics.In addition, the left and right channels are completely separated in the HPF magnetic circuit to achieve a symmetrical arrangement, thereby reducing imbalance between channels in terms of various characteristics. A single-point suspension system is employed, in which a disk-shaped magnet is placed at the base of the cantilever, which is attached to the support pipe by suspension wires via a disk-shaped damper.This clearly unifies the fulcrum just behind the magnet, preventing the generation of intermodulation distortion due to the back-and-forth change of the cantilever and the deterioration of high-frequency characteristics due to the increase of equivalent mass from the needle tip perspective. The low inductance design minimizes the effect of addition, resulting in high performance.The DC resistance is also designed to be extremely small, resulting in low noise due to the resistive component in the amplifier input stage and a high signal-to-noise ratio. Specifications Type: MM CartridgeMagnetic Circuit: Mirror-polished HPF core used in all magnetic circuitsCantilever: Pure boron pipeDamper: TTDD (Technics Temperature Defense Damper)Magnet: Sm-Co(BH)max 30MG-OeFrequency Response: 20Hz to 15kHz ±0.3dBFrequency range: 10Hz to 60kHzTemperature Characteristics (5°C to 35°C): ±1dB(10kHz), ±3dB(20kHz, 1kHz reference)Output voltage: 1.3mV (1kHz, 5cm/sec, zero to peak, horizontal velocity), 1.8mV (1kHz, 5cm/sec, zero to peak, 45? velocity)Channel separation: 25dB or better (1kHz), 20dB or better (10kHz)Channel balance: within 0.5dB (1kHz)Compliance: 12x10-6cm/dyne (100Hz)DC resistance: 30?Inductance: 33mHImpedance: 210?(1kHz)Recommended Load Resistance: 10k? to 1M?Recommended Load Capacitance: 500pF or lessTransducer effective mass: 0.23mgNeedle Pressure Range: 1.25g±0.25gOverhang Adjustment Range: 52±3mm (distance from the tip of the needle to the reference surface of the shell)Cartridge tilt angle: ±2° to the left and rightWeight: 18.3gReplacement needle: EPS-100ED2 Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

DescriptionCondition :UsedSee the pictures for more details.If you have any question , please contact us.Shipping Handling time: 2-10 business days after payment.Economy Shipping from outside US (11 to 23 business days) - Free shipping Due to Japanese Post Service/DHL/FedEX, will be shipped according to the situation., estimated arrival time can be delay. And it depends on custom in your country also. So if it is late please contact local post office (carrier)with tracking number . NOTE:When shipping small items, the tracking number of economy shipping may not be attached.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Technics EPC-100C MK2 Stereo MM Moving Magnet Cartridge Phono Pick-up Vintage Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, dullness, dirt, etc. due to normal use. For other appearances, please refer to the photo. Overview Pure boron cantilever is used for the cantilever. This material, which is difficult to make into a solid bar, is refined into a pipe shape by a special manufacturing process to achieve light weight and high strength. Furthermore, a laser beam is used to process the tip mount hole for mounting the needle tip tip in pursuit of precision, resulting in an extremely small effective mass of the resonator and pushing the high frequency resonance frequency out of the audible range. The TTDD (Technics Temperature Defense Damper) developed by Technics is used. Compared to commonly used butyl rubber, this damper material has about 1/3 of the temperature dependence, and has excellent viscoelasticity and excellent cantilever support performance. As a result, there is almost no deterioration in sound quality and tracing performance due to temperature changes in the room. In the magnetic circuit, mirror-polished HPF cores are used for all magnetic materials such as pole pieces and yokes to obtain excellent transmission characteristics.In addition, the left and right channels are completely separated in the HPF magnetic circuit to achieve a symmetrical arrangement, thereby reducing imbalance between channels in terms of various characteristics. A single-point suspension system is employed, in which a disk-shaped magnet is placed at the base of the cantilever, which is attached to the support pipe by suspension wires via a disk-shaped damper.This clearly unifies the fulcrum just behind the magnet, preventing the generation of intermodulation distortion due to the back-and-forth change of the cantilever and the deterioration of high-frequency characteristics due to the increase of equivalent mass from the needle tip perspective. The low inductance design minimizes the effect of addition, resulting in high performance.The DC resistance is also designed to be extremely small, resulting in low noise due to the resistive component in the amplifier input stage and a high signal-to-noise ratio. Specifications Type: MM CartridgeMagnetic Circuit: Mirror-polished HPF core used in all magnetic circuitsCantilever: Pure boron pipeDamper: TTDD (Technics Temperature Defense Damper)Magnet: Sm-Co(BH)max 30MG-OeFrequency Response: 20Hz to 15kHz ±0.3dBFrequency range: 10Hz to 60kHzTemperature Characteristics (5°C to 35°C): ±1dB(10kHz), ±3dB(20kHz, 1kHz reference)Output voltage: 1.3mV (1kHz, 5cm/sec, zero to peak, horizontal velocity), 1.8mV (1kHz, 5cm/sec, zero to peak, 45? velocity)Channel separation: 25dB or better (1kHz), 20dB or better (10kHz)Channel balance: within 0.5dB (1kHz)Compliance: 12x10-6cm/dyne (100Hz)DC resistance: 30?Inductance: 33mHImpedance: 210?(1kHz)Recommended Load Resistance: 10k? to 1M?Recommended Load Capacitance: 500pF or lessTransducer effective mass: 0.23mgNeedle Pressure Range: 1.25g±0.25gOverhang Adjustment Range: 52±3mm (distance from the tip of the needle to the reference surface of the shell)Cartridge tilt angle: ±2° to the left and rightWeight: 18.3gReplacement needle: EPS-100ED2 Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Technics EPC-100C MK2 Stereo MM Moving Magnet Cartridge Phono Pick-up Vintage Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, dullness, dirt, etc. due to normal use. For other appearances, please refer to the photo. Overview Pure boron cantilever is used for the cantilever. This material, which is difficult to make into a solid bar, is refined into a pipe shape by a special manufacturing process to achieve light weight and high strength. Furthermore, a laser beam is used to process the tip mount hole for mounting the needle tip tip in pursuit of precision, resulting in an extremely small effective mass of the resonator and pushing the high frequency resonance frequency out of the audible range. The TTDD (Technics Temperature Defense Damper) developed by Technics is used. Compared to commonly used butyl rubber, this damper material has about 1/3 of the temperature dependence, and has excellent viscoelasticity and excellent cantilever support performance. As a result, there is almost no deterioration in sound quality and tracing performance due to temperature changes in the room. In the magnetic circuit, mirror-polished HPF cores are used for all magnetic materials such as pole pieces and yokes to obtain excellent transmission characteristics.In addition, the left and right channels are completely separated in the HPF magnetic circuit to achieve a symmetrical arrangement, thereby reducing imbalance between channels in terms of various characteristics. A single-point suspension system is employed, in which a disk-shaped magnet is placed at the base of the cantilever, which is attached to the support pipe by suspension wires via a disk-shaped damper.This clearly unifies the fulcrum just behind the magnet, preventing the generation of intermodulation distortion due to the back-and-forth change of the cantilever and the deterioration of high-frequency characteristics due to the increase of equivalent mass from the needle tip perspective. The low inductance design minimizes the effect of addition, resulting in high performance.The DC resistance is also designed to be extremely small, resulting in low noise due to the resistive component in the amplifier input stage and a high signal-to-noise ratio. Specifications Type: MM CartridgeMagnetic Circuit: Mirror-polished HPF core used in all magnetic circuitsCantilever: Pure boron pipeDamper: TTDD (Technics Temperature Defense Damper)Magnet: Sm-Co(BH)max 30MG-OeFrequency Response: 20Hz to 15kHz ±0.3dBFrequency range: 10Hz to 60kHzTemperature Characteristics (5°C to 35°C): ±1dB(10kHz), ±3dB(20kHz, 1kHz reference)Output voltage: 1.3mV (1kHz, 5cm/sec, zero to peak, horizontal velocity), 1.8mV (1kHz, 5cm/sec, zero to peak, 45? velocity)Channel separation: 25dB or better (1kHz), 20dB or better (10kHz)Channel balance: within 0.5dB (1kHz)Compliance: 12x10-6cm/dyne (100Hz)DC resistance: 30?Inductance: 33mHImpedance: 210?(1kHz)Recommended Load Resistance: 10k? to 1M?Recommended Load Capacitance: 500pF or lessTransducer effective mass: 0.23mgNeedle Pressure Range: 1.25g±0.25gOverhang Adjustment Range: 52±3mm (distance from the tip of the needle to the reference surface of the shell)Cartridge tilt angle: ±2° to the left and rightWeight: 18.3gReplacement needle: EPS-100ED2 Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Technics EPC-100C MM Cartridge Early Model Good Condition From JapanDescription Playback has been checked. Only a few hours of use. We will carefully package and ship the product.Payment We accept credit cards, debit cards, Apple Pay, Google Pay, and paypal. Payment must be made within 3 days of purchase. Shipping It will be shipped by Fedex or DHL or Japan Post. Shipping from Japan with Tracking Number. Items will be shipped within 5 business days after payment is received. Shipping is only available to the address registered on ebay. Please note that any address not registered on ebay is not acceptable to ship. Terms of Sale:Return ~Unconditional Return Policy~ Customer service and satisfaction are very important to us. I have an unconditional return policy. Please contact us first for return before you ship it back to me. Return is allowed when the condition does not match with description. All returned items must be the original condition. Please keep in your mind that we take pictures of all the items details to avoid any problem. If you ask for a refund or return, we might ask you to take a picture of the item to make sure it matches our record. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Anschrift | Filiale Hamburg Tredec Warenhandels GmbH Esmarchstr. 82-84 22767 Hamburg Unsere Öffnungszeiten: Mo-Fr von 8:00-17:00 Uhr Impressum AGB Widerrufsrecht Batterieentsorgung Verpackungshinweis --> Zustand: Ausstellungsstück in neuwertigem Zustand - technisch einwandfrei - Kartonmakel Zubehör: vollständig Info Es handelt sich hierbei um Ausstellungsware mit 12 Monaten Gewährleistung. Ersteigerte Artikel, können Sie natürlich auch von Montag bis Freitag persönlich bei uns abholen. Bei Fragen, rufen Sie uns gern an. Mit freundlichen Grüßen Ihr Tredec Team

For sale is a rare cartridge manufactured by Technics, model 100C Mk2. It still sounds great.

For sale is a rare cartridge manufactured by Technics, model 100C Mk2. Its sound is even better than MC cartridges.

Verkauft wird ein Plattenspieler der Firma Technics Modell SL-100C in tadellosem Zustand. Gekauft in 2021.Zubehör: Netzkabel, Bedienungsanleitung, incl. Tonabnehmer von Audio Technica

I bought this record player new and though it sounds absolutely incredible, I no longer find the time to use it or play records. Condition is like new. No issues or damage. Cartridge is an Audio Technica AT-VMN95C. Comes with all original parts/pieces, instructions, and original protective packaging. See pics for details. This currently retails new on Amazon for $1099. - Enter the Real Vinyl Culture with Technics Premium Class Turntable: Featuring iconic characteristics of Technics legendary turntables the SL-100C Turntable uses a single-rotor coreless direct drive brushless DC motor for smooth, stable playback. - Accurately Reads Your Records: The high-sensitivity aluminum S-shape tonearm reads every signal stored in record grooves, for optimal tracking and sound. - Audiophile-Grade Cartridge: A pre-installed Audio-Technica cartridge provides high fidelity with minimal setup; tonearm height adjusts easily within a range of 6 mm, enabling the use of other phono cartridges for easy upgrades. - Auto-Lifter Reduces Wear on Records & Stylus: At the end of a record, the Auto Lifter raises the cartridge; the simple design doesn’t use motor power which eliminates electrical or vibrational impact to help preserve vinyl records from stylus wear. - Functional and Beautiful: A vinyl player with a sleek, minimalist design and elegant, high-quality operation provide an excellent listening experience Thanks for browsing my humble shop! Check out my other listings for an eclectic mix of books, dvds, vhs, cds, board games, and other funky finds. 15% Off: On orders of 3+ qualifying items (see my store page.) ENVIRONMENTAL PLEDGE: I do my best to package & ship as sustainably as I can by reusing packaging and using reusable and home compostable mailer bags when possible. Cheers, -EcoThrift NC

Technics EPC-100C MM Cartridge For Turntable Tonearm. Tested And Working. See the cantilever is slightly to the left. Sound superb

This is the Technics SL-100C Premium Class Turntable System in new in open box condition. The box was received direct from Panasonic earlier this year 2023 and will be shipped in the same box and packaging as originally received. The package was opened only to verify its contents. The turntable itself has never been assembled or used and all parts and materials remained taped up and sealed. The serial number has not been registered with Panasonic. I am also including a Technics limited edition (RED) slipmat. Product page link:https://us.technics.com/products/direct-drive-turntable-sl-100c

This is the Technics SL-100C Premium Class Turntable System in new in open box condition. The box was received direct from Panasonic earlier this year 2023 and will be shipped in the same box and packaging as originally received. The package was opened only to verify its contents. The turntable itself has never been assembled or used and all parts and materials remained taped up and sealed. The serial number has not been registered with Panasonic. I am also including a Technics limited edition (RED) slipmat. Product page link:https://us.technics.com/products/direct-drive-turntable-sl-100c

Description of itemPayment methodSame as ebay payment method.shipping methodYour order will be dispatched to you from Japan within the designated handling time from the date of payment.Transaction mattersPacking state: We will carefully pack your items with the most appropriate protection materials to avoid your items from getting damaged during transport to you. Feedback:You will receive a positive feedback from our store as soon as you successfully complete your order and payment. We would very much appreciate if you could leave us one, too! We are a Japanese store specializing in Japanese high-quality products. Please let us hear from you with any inquiries you may have about our products. Happy shopping!To overseas buyers-Notes:Please be aware of customs fees - such as taxes and duties - when your order arrives. Since these fees vary from location to location, CUSTOMS FEES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING CHARGES. Please check with your local customs office for more information on the fees in your area. Refusal to pay these fees can result in an undeliverable order. Please note - we cannot undervalue orders, or mark them as a gift.

Missing wires has scratches and cover is scratched

Missing wires has scratches and cover is scratched

Technics EPC-100C MM Cartridge For Turntable Tonearm. Tested And Working. See the cantilever is slightly to the left. Sound superb