Choice Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of all housing parts yourself. Also possible in multiple colors!You can choose the color of all housing parts yourself. Multicolored also possible! Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 Professional - in your desired colorOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Housing: Painted in your desired color! Multi-colored paint finishes also possible. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. All required cable connections (flex) are located on the back. Device feet: Height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated p Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

Beautiful THORENS TD520 turntable with a fantastic SME 3012-R tonearm, factory assembled by Thorens. Additionally, it has a rarely used, very good Audio-Technica AT-OC9/II installation.The turntable plays and looks beautiful. Perfect condition, no scratches or cracks. The plastic casing is also in good condition, with no scratches or abrasions. Ive had it for a long time, but I need to sell part of my collection.Collection in person preferred, but shipping can also be arranged after prior e-mail contact.Regards.

Original Control Panel for Turntable Thorens TD520 Cover Front PanelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Front panel for 520 turntableCondition: very good, with adhesive residue on the back, slightly bent and cannot be assembled Front panel for 520 turntable Condition: very good, with adhesive residue on the back, slightly bent and cannot be assembled Marke art-and-sound EAN Nicht zutreffend Markenkompatibilität Für Thorens Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Produktart Tonarmbasis

Choice Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of all housing parts yourself. Also possible in multiple colors!You can choose the color of all housing parts yourself. Multicolored also possible! Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 Professional - in your desired colorOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Housing: Painted in your desired color! Multi-colored paint finishes also possible. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. All required cable connections (flex) are located on the back. Device feet: Height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated p Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

Restored Turntable Thorens TD 520 Vogelaugenfurnier & Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 ProfessionalBirds eye veneer - high gloss finish - stainless steelThe vodel eye veneer is available in either black or dark blue (as shown).Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Device feet: Optionally height-adjustable spikes made of chrome-plated stainless steel (these are a little more subtle) or the device feet shown made of stainless steel (height adjustable, total weight 2520g, diameter 65mm, total height 28mm)Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all compo Marke Thorens (Restauriert von ART-and-SOUND) EAN Nicht zutreffend Modell TD 520

Original Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Revised 520 Professional original conditionin top conditionWith limit switchIncludes Ortofon Vinyl Master Alpha pickupNew RCA audio cable (permanently installed)Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Device feet: Optionally original or height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Turntable support: With antistatic effect! This plate support consists of a balanced mixture of rubber and non-antistatic cork granulate. The result is a perfect connection between vinyl record and plate. Suitable for Thorens turntables, this rubber/cork mat absorbs resonances and vibrations. This will significantly improve the sound of your turntable. Manufactured from natural resources in compliance with environmental standards. Specification: airborne sound-isolation-vibation-damping and anti-static effect.The following work will be carried out:Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Turntable support: With antistatic effect! This plate support consists of a balanced mixture of rubber and non-antistatic cork granulate. The result is a perfect connection between vinyl record and plate. Suitable for Thorens turntables, this rubber/cork mat absorbs resonances and vibrations. This will significantly improve the sound of your turntable. Ma Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

Hello and thanks for checking out another great auction from Behind Door 3!We hope you enjoy the photos and information presented herein.If you have any questions, feel free to contact us for a prompt and friendly response. Pre-Owned in Great ConditionRare Vintage Thorens TD 160 MK II Turntable + Stanton Craze D5200 Cartridge TESTED - US SellerDevice: ThorensModel: TD 160 MK II The is in Great Condition and Fully Tested. Please see the video uploaded in the listing showing the exact item up for sale. The item is being sold from a US Seller and comes from the original owner. A brand new belt was installed by a technician and all features have been tested. The cartridge / needle installed is a Stanton Craze D5200 Cartridge. The only issue with the unit is the top lid and hinge. We are not sure if the hinge is the issue or the lid is missing a part. The lid also shows heavy signs of scratches and scuffs (see images). Please do your research prior to purchasing. Please view and inspect the images to verify the condition of the actual item you will receive. -Buy with Confidence-Thank you for checking out our listing Terms CA state sales tax applies While we can accept returns for an undescribed flaw or error in the listing, RETURNS FOR REASONS RELATING TO EITHER A CHANGE IN PERSONAL TASTE, PREFERENCE, OR OPINION ARE SUBJECT TO A RESTOCKING FEE. We encourage you to research the item you plan to purchase so you know what to expect when it arrives. When you commit to purchase the item, we commit to providing you with exactly what you purchase.We are here for you! If you have any questions simply contact us through the messaging system, or call our business office.M-F from 10:00-6:30 PST and Sat from 10:00-5:30

2021 Wartung, Kabel von Linn, Riemen und neues System Ortofon 2M Blue im Klangstudio Pohl erhalten, Haube hat Gebrauchsspuren - die übrige Anlage kann günstiger auf Anfrage erworben werden, TCD 2000 ist gerade bei Restek, FB ist auch vorhanden, Sie können auch vor Ort über einen Kauf entscheiden !

Thorens Plattenspieler Modell: TD 520 Professional Klassischer High End Plattenspieler aus bestem Hause, einer der letzten echten Thorens noch aus der guten Zeit. Allgemein Lieferumfang : Thorens Plattenspiler TD 520 Pro siehe Bilder Technisch : Voll Funktionstüchtig mit Netzteil ohne System Optisch : Sehr guter Zustand kaum Gebrauchsspuren Versand: Wir Versenden mit DHL / Kein Auslandsversand nur innerhalb Deutschland. Kaufpreis : Der Verkaufspreis beinhaltet die gesetzl. Mehrwertsteuer, diese wird jedoch nach §25a UstG (Differenzbesteuerung) auf der Rechnung nicht gesondert ausgewiesen. !!! Original Bilder !!!

Original Control Panel for Turntable Thorens TD520 Cover Front PanelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Front panel for 520 turntableCondition: very good, with adhesive residue on the back, slightly bent and cannot be assembled Front panel for 520 turntable Condition: very good, with adhesive residue on the back, slightly bent and cannot be assembled Marke art-and-sound EAN Nicht zutreffend Markenkompatibilität Für Thorens Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Produktart Tonarmbasis

Choice Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of all housing parts yourself. Also possible in multiple colors!You can choose the color of all housing parts yourself. Multicolored also possible! Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 Professional - in your desired colorOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Housing: Painted in your desired color! Multi-colored paint finishes also possible. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. All required cable connections (flex) are located on the back. Device feet: Height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated p Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

Restored Turntable Thorens TD 520 Vogelaugenfurnier & Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 ProfessionalBirds eye veneer - high gloss finish - stainless steelThe vodel eye veneer is available in either black or dark blue (as shown).Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Device feet: Optionally height-adjustable spikes made of chrome-plated stainless steel (these are a little more subtle) or the device feet shown made of stainless steel (height adjustable, total weight 2520g, diameter 65mm, total height 28mm)Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all compo Marke Thorens (Restauriert von ART-and-SOUND) EAN Nicht zutreffend Modell TD 520

Original Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Revised 520 Professional original conditionin top conditionWith limit switchIncludes Ortofon Vinyl Master Alpha pickupNew RCA audio cable (permanently installed)Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Device feet: Optionally original or height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Turntable support: With antistatic effect! This plate support consists of a balanced mixture of rubber and non-antistatic cork granulate. The result is a perfect connection between vinyl record and plate. Suitable for Thorens turntables, this rubber/cork mat absorbs resonances and vibrations. This will significantly improve the sound of your turntable. Manufactured from natural resources in compliance with environmental standards. Specification: airborne sound-isolation-vibation-damping and anti-static effect.The following work will be carried out:Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Turntable support: With antistatic effect! This plate support consists of a balanced mixture of rubber and non-antistatic cork granulate. The result is a perfect connection between vinyl record and plate. Suitable for Thorens turntables, this rubber/cork mat absorbs resonances and vibrations. This will significantly improve the sound of your turntable. Ma Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

Welcome to Audio/Video Archives, the largest home of audio literature available on eBay! This is a Reprint Review from 1987. It will have a full test of the item listed along with Specifications, Articles, Information and Commentary. The Picture is of the actual item. It will have a Test of the product, Specs, Commentary and Information about the item listed. It is a beautiful piece of Audio History. I have THOUSANDS more from every major brand of Audio from 1950 up to now. ---Satisfaction is GUARANTEED at AV Archives! Take a look at my feedback for satisfied customers! I have been open since 2007 and have sold THOUSANDS of Ads, Reviews, and Brochures to satisfied customers. ---I Ship Worldwide and combine shipping, each additional item is just $1 after the first is paid. ---Each Page is 8.5 by 11 unless otherwise noted in title. ---Single-Sided professional matte photo pages, unless otherwise noted in the title. ---These Ads and Reviews are perfect for framing and placed in your Audio Room. ---I have a HUGE Vinyl Record Store with Thousands of Collectable records, and MANY First Pressings/Audiophile LPs. Just click on my Vinyl Record Store link on the left under categories. Email me for any specific questions, You will hear back from me usually within 4 hours, THANK YOU! Greg Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Sehr guter Zustand. Very good condition.

Original Control Panel for Turntable Thorens TD520 Cover Front PanelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Front panel for 520 turntableCondition: very good, with adhesive residue on the back, slightly bent and cannot be assembled Front panel for 520 turntable Condition: very good, with adhesive residue on the back, slightly bent and cannot be assembled Marke art-and-sound EAN Nicht zutreffend Markenkompatibilität Für Thorens Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Produktart Tonarmbasis

Choice Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of all housing parts yourself. Also possible in multiple colors!You can choose the color of all housing parts yourself. Multicolored also possible! Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 Professional - in your desired colorOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Housing: Painted in your desired color! Multi-colored paint finishes also possible. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. All required cable connections (flex) are located on the back. Device feet: Height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated p Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

Restored Turntable Thorens TD 520 Vogelaugenfurnier & Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 ProfessionalBirds eye veneer - high gloss finish - stainless steelThe vodel eye veneer is available in either black or dark blue (as shown).Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Device feet: Optionally height-adjustable spikes made of chrome-plated stainless steel (these are a little more subtle) or the device feet shown made of stainless steel (height adjustable, total weight 2520g, diameter 65mm, total height 28mm)Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all compo Marke Thorens (Restauriert von ART-and-SOUND) EAN Nicht zutreffend Modell TD 520

Original Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Revised 520 Professional original conditionin top conditionWith limit switchIncludes Ortofon Vinyl Master Alpha pickupNew RCA audio cable (permanently installed)Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Device feet: Optionally original or height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Turntable support: With antistatic effect! This plate support consists of a balanced mixture of rubber and non-antistatic cork granulate. The result is a perfect connection between vinyl record and plate. Suitable for Thorens turntables, this rubber/cork mat absorbs resonances and vibrations. This will significantly improve the sound of your turntable. Manufactured from natural resources in compliance with environmental standards. Specification: airborne sound-isolation-vibation-damping and anti-static effect.The following work will be carried out:Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Turntable support: With antistatic effect! This plate support consists of a balanced mixture of rubber and non-antistatic cork granulate. The result is a perfect connection between vinyl record and plate. Suitable for Thorens turntables, this rubber/cork mat absorbs resonances and vibrations. This will significantly improve the sound of your turntable. Ma Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

THORENS TD520 DescriptionThe TD520 is a black-finished floating cabinet with SME 3012-R long arm factory-equipped.It is equipped with ESOS (Electro Shut-off System) mechanism, where the lifters automatically UP and the turntable stops rotating after a performance. Operation checkWe have performed total maintenance and operation checks for this exhibit.We have measured electronic parts, lubricated spindle oil, cleaned each contact point, and adjusted each part.The machine is in good condition for safe use.The turntable rotates normally in conjunction with the 33/45/78 turntable button.The stroboscope also confirms stable rotation.Fine tuning of rotation speed can be done within the range.The start/stop button response is also fine.The strobe lights up without any burnout.The left and right channels output better sound.The lifter operates smoothly up and down with the UP/DOWN lever.The ESOS also works fine, and the arm automatically lifts up and stops rotating after playing.The inside force canceller works well.The height of the arm can be adjusted.If you find any defects after arrival, please feel free to contact us for a free return. Please contact us for a free return policy (limited to 30 days after delivery). AccessoryDust coverHead shell (SME)Lead wires x 4Main weight / Needle pressure adjustment weightSub weightInside force canceller weightSME cable (installed)New rubber belt (THORENS)Rubber mat (THORENS)AC adapter (THORENS)Instruction manual for TD500 series (copy)Instruction Manual for SME 3012-R (copy)Mounting template/alignment protractor (copy)Spindle oil PackagingWhen exporting overseas, we will ship the product in reinforced cardboard boxes to prevent damage during transportation. If the product comes with its original box, we will ship it with the original box protected. PrecautionsWhen using the product, please check the voltage supported by the product and the voltage in your area carefully. If the voltage is different from the product specifications, not only will the product not function properly, it may also damage the equipment. About Handling TimeShips within 5 business day.Please note that Saturdays, Sundays, and holidays do not count as business days. About Shipping PolicyWe ship via FedEx, DHL or Japan Post. International Buyers - Please Note:Duties, taxes, and fees are not included in the product price or shipping cost. You are responsible for paying any duties, taxes, or fees that may be incurred when importing products into your country. We also recommend that you check with your customs office in advance of your purchase to determine how much these additional costs will be.

Hello and thanks for checking out another great auction from Behind Door 3!We hope you enjoy the photos and information presented herein.If you have any questions, feel free to contact us for a prompt and friendly response. Pre-Owned in Great ConditionRare Vintage Thorens TD 160 MK II Turntable + Stanton Craze D5200 Cartridge TESTED - US SellerDevice: ThorensModel: TD 160 MK II The is in Great Condition and Fully Tested. Please see the video uploaded in the listing showing the exact item up for sale. The item is being sold from a US Seller and comes from the original owner. A brand new belt was installed by a technician and all features have been tested. The cartridge / needle installed is a Stanton Craze D5200 Cartridge. The only issue with the unit is the top lid and hinge. We are not sure if the hinge is the issue or the lid is missing a part. The lid also shows heavy signs of scratches and scuffs (see images). Please do your research prior to purchasing. Please view and inspect the images to verify the condition of the actual item you will receive. -Buy with Confidence-Thank you for checking out our listing Terms CA state sales tax applies While we can accept returns for an undescribed flaw or error in the listing, RETURNS FOR REASONS RELATING TO EITHER A CHANGE IN PERSONAL TASTE, PREFERENCE, OR OPINION ARE SUBJECT TO A RESTOCKING FEE. We encourage you to research the item you plan to purchase so you know what to expect when it arrives. When you commit to purchase the item, we commit to providing you with exactly what you purchase.We are here for you! If you have any questions simply contact us through the messaging system, or call our business office.M-F from 10:00-6:30 PST and Sat from 10:00-5:30

Zum Verkauf steht ein gebrauchtes 10 mm-Lager eines TD 320 MK II / III aus Messing mit einem Spiegel aus Nylatron. Der gleiche Lagertyp kam auch beim TD 2001/50 zum Einsatz. Original, kein Nachbau. Das Lager dieser Art ist in folgenden Laufwerken einsetzbar: TD 2001 / 3001 / 320 (ab MK II mit passender Bohrung des Subchasisbrettes)/ Phonosophie No. 3. Die Voraussetzung für den Einbau ist eine Bohrung von 2.8 cm. Bei einer vergrößerten Bohrung auf 2.8 cm kann das Lager ebenfalls beim TD 520/521/320 MKI sowie bei anderen Thorens Laufwerken der 90 Jahre eingesetzt werden, die mit der 10mm Achse ausgestattet waren. Für den S-Teller ist der Lagerspiegel zu weich. Das Lager ist mechanisch identisch mit dem Lager des TD 520/521/320. Lediglich der ab Werk verpresste Lagerflansch macht hier den Unterschied aus. Die Messinghülse sowie die Tiefe war bei allen oben genannten Laufwerken gleich (es kam die gleiche Achse zum Einsatz). Der Lagerflansch ist identisch mit dem Flansch eines TD 2001 der 2. Generation und besteht aus Zamak. Diese Metalllegierung läuft im Laufe der Zeit an. Mit der Metarex-Polierwatte lässt sich das Teil problemlos wieder zum Glänzen bringen. Dieses Lager hat keinen Spiegel aus Hartmetall, wie es bei den hochpreisigen Laufwerken TD 2001/3001/ Phonosophie der Fall war, sondern aus Nylatron, was aber nicht zwingend ein Nachteil ist. Das Nylatronlager ist robuster und geht kaum kaputt, das ist beim Hartmetallspiegel anders. Auch klanglich ist es nicht schlechter. Sehr schöner, gebrauchter Zustand mit normalen Gebrauchsspuren. Lieferumfang, wie abgebildet zusammen mit einem Erdungsring und 3 Schrauben. Die Vertiefung (wie im Foto) ist in der Mitte des Nylatronspiegels völlig normal und es ist keine Beschädigung. Bei einem Kauf von mehreren Artikeln wird eine Kombizahlung angeboten, um so die Versandkosten zu sparen. Privatverkauf, daher keine Rücknahme oder Garantie. Der Preis ist fest und nicht verhandelbar.Versicherter DHL-Versand.

Choice Revised Turntable Thorens Td 520 ProfessionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of all housing parts yourself. Also possible in multiple colors!You can choose the color of all housing parts yourself. Multicolored also possible! Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 Professional - in your desired colorOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Housing: Painted in your desired color! Multi-colored paint finishes also possible. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. All required cable connections (flex) are located on the back. Device feet: Height-adjustable spikes made of chrome-plated stainless steel. The stainless steel device feet shown are optional.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Device feet made of stainless steel see product photos:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799Pickup VinylMaster Alpha (included): With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. Audio cable (separable): Branded cable, fReady-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated p Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD520

Restored Turntable Thorens TD 520 Vogelaugenfurnier & Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored 520 ProfessionalBirds eye veneer - high gloss finish - stainless steelThe vodel eye veneer is available in either black or dark blue (as shown).Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot.Device feet: Optionally height-adjustable spikes made of chrome-plated stainless steel (these are a little more subtle) or the device feet shown made of stainless steel (height adjustable, total weight 2520g, diameter 65mm, total height 28mm)Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all components, carrying out an endurance test General data: Manufacturer: ThorensModel: TD 520Type: Turntable DriveYears of construction: 1985 – 1999Made in GermanyColor: Black, wooden case Dimensions: 550 x 400 x 170 mm (WxHxD)Weight: approx. 15kgTechnical data: Drive: precision-ground flat belt; inside on a sub-plateMotor: AC; 16-pole synchronous motor with 2-phase generatorSpeed: 33, 45, 78 rpmTurntable: 300mm; zamak; 3.2kgOperating mode: Tonearm liftPitch: ±12%Tonearm: TP 16 Mk IV L, Eff. Mass 15g, eff. Length 247.7 mm, overhang 17.7 mm, offset 23°, other (up to 12)Subchassis: three-point, leaf spring; integratedThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799VinylMasterAlpha: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the quality by using the next higher needle slot with the appropriate needle slot. The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of the required components, adjustment and adjustment of the various speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and the cartridge, thorough cleaning of the entire record player and all compo Marke Thorens (Restauriert von ART-and-SOUND) EAN Nicht zutreffend Modell TD 520