Revised Thorens TD 125 MKII Turntable Wurzelholzfurnier & Porsche BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Revised 125 MKII veneer frame burl wood high gloss and Porsche blue20kg turntableThe blue base plate is also available in black or brushed stainless steel!Please note that wood is a natural product. The grain and color will always differ slightly from the item photos.Our record players are lovingly put together, restored and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalSpindle: 10mmBasic dimensions:            Width: 525mm, depth: 413mm, height 97mDevice feet: spikesThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of endurance testHousing:The housing consists of 40mm solid MDF side panels and a 16mm thick base, also made of MDF. The surface was veneered and refined several times with high-gloss varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): 6.3 kgOrtofon OM5E cartridge (included):The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. Drive belt:The drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood (for placing on the housing): 160Device feet XXL (height adjustable, Total weight 2520g, 65mm x 26mm): 90 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799The housing consists of 40mm solid MDF side panels and a 16mm thick base, also made of MDF. The surface was veneered and refined several times with high-gloss varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Original Thorens Nf Cable Connection for Td 125 MkiiThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original Thorens NF cable connection for TD 125 MKII   Original Thorens NF cable connection for TD 125 MKII   Herstellernummer nicht zutreffend Marke Thorens Markenkompatibilität Thorens Produktart Gehäuse EAN Nicht zutreffend

Revised Thorens TD 125 MKII Turntable Massive oak Wood Frame OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Desired Color! Revised Thorens TD 125 MKII Turntable Sme 3009 Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing, top plate and tonearm base yourself.You can choose the color of the housing, the cover plate and the tonearm base yourself.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:Painted in your desired color!The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Cover plate:The cover plate is painted in your desired color!Tonearm base:The tonearm base is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented.XL (see pictures 11 and 12): 84XXL (see pictures 9 and 10): 130Cartridge MM system including installation: Ortofon VinylMaster Red (naked elliptical cut):             220Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut):        470 Ortofon 2MRed (elliptical):             99Ortofon 2M Blue (diamond cut):   220Ortofon 2M Bronze (fineline diamond cut): 390 Ortofon 2M Black (Shibata diamond cut):         599 Ortofon 2M Black LVB 250 (Shibata diamond cut):              945audio-technica VM740ML Dual MM (Microlinear Needle):        339audio-technica VM750SH Dual MM (Shibata needle):                439 audio-technica VM760SLC Dual MM (Special Line Contact):  699Cartridge MC System including installation: audio-technica AT-OC9XML Dual MC (Microlinear Needle):    599 audio-technica AT-OC9XSH Dual MC (Shibata needle grind):  699 audio-technica AT-OC9XSLDual MC (Special Line Contact): 799The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxy Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Restored Thorens TD 125 MKII Turntable Sme White/MarbledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.RESTORED by ART-AND-SOUND Restored 125 MKII with SME 3009 tonearmDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmAudio and Power cables are firmly connected to the turntable. The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum painted black / gold, tonearm board / tonearm base newThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Original SME cableThe turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 112401191474The following parts are available as accessories and not included in this auction:Hood (to put on the housing):    German eBay-article number is 112401191474Cartridge MM systems including installation: Cartidge MC systems including installation:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strai Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Restored Thorens TD 125 MKII turntable SME white / orange The description of this item has been automatically translated. If you have any questions, please feel free to contact us. See also this products: Restored Thorens TD 125 MKII Turntable Sme White/Marbled Restored Thorens TD 125 MKII Turntable Sme White/Burgundy Restored Thorens TD 125 MKII Turntable Sme White/Ice Blue Restored Thorens TD 125 MKII Turntable Sme White/Stainless Steel Restored Thorens TD 125 MKII Turntable Also Sme 3009 Possible Restored Thorens TD 125 MKII Turntable Frame Elsberry Sme 3009 Possible Restored Thorens TD 125 MKII Turntable IN Black Orange Restored Thorens TD 125 MKII Turntable With Sme Tracking Arm 3009 Antriebstyp Riemenantrieb Ausländisches Produkt Ja Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellernummer nicht zutreffend Modifizierter Artikel Ja Herstellungsland und -region Deutschland EAN Nicht zutreffend

Revised Thorens TD 125 MKII Turntable oak Wood Rustic OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound Tonumfang +/- 16 % EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable Massives Ash Wood High GlossThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Revised TD 125 MKII Turntable Solid Ash Wood Frame Oiled The description of this item has been automatically translated. If you have any questions, please feel free to contact us. See also this products: Revised Thorens TD 125 MKII Turntable Massive oak Wood Frame Oiled Revised Thorens TD 125 MKII Turntable Nussbaumholz Frame Oiled Revised Thorens TD 125 MKII Turntable oak Wood Rustic Oiled Revised Thorens TD 125 MKII Turntable Massives Ash Wood High Gloss Revised Thorens TD 125 MKII Turntable With Massive Birnenholz Frame Revised Thorens TD 125 MKII Turntable Various Veneer Possible Revised Thorens TD 125 MKII Turntable Nussbaumholz High-Gloss Revised Thorens TD 125 MKII Turntable Wurzelholzfurnier & Porsche Blue Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellungsland und -region Deutschland Tonumfang +/- 16 % Antriebstyp Riemenantrieb EAN Nicht zutreffend

Revised Thorens TD 125 MKII Turntable Nussbaumholz Frame OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound Tonumfang +/- 16 % EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Tonarmboard ist für 9 SME Tonarme ohne Tonarmvoll funktionstüchtig ohne EinschränkungDrehstabfedern sind derzeit ausgehängt , um die Haube zu schonen gebraucht, mit den üblichen Gebrauchsspuren,aber keine Risse oder Schrammen an der Holzzarge benutze den SME 3009 / S3 an meinem TD 226ggfs. kann ein SME Arm gegen Aufpreis geliefert werden zB SME 3009 S2 plus 500.- = 1300.- ohne System Versand möglich, Abholung bevorzugt

Restored Thorens TD 125 MKII turntable solid frame made of pear woodThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on eBay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 125 MKII with solid pear wood frame Various SME tonearms are optionally available20kg record playerPlease note that wood is a natural product. The grain and color tone will always differ from the item photos.Item description:Pickup: Ortofon OM5EDevice feet: Spikes, height adjustableLimit switch: NoInner plate: metalSpindle: 10mmBasic dimensions: Width: 525mm, Depth: 413mm, Height 97mmThe following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of required components, new internal housing wiring (audio with sommer cable), new headshell cable, setting and adjustment of the various speeds, setting and adjustment of the suspension, checking and setting the tone arm and the pickup, careful cleaning and care of the entire record player, endurance test, acceptance and VDE safety test Housing: The housing is made of 40mm solid pear wood and a 16mm thick MDF base. The surface has been oiled and polished several times. On the back there is the connection panel for all necessary cables. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case bottom. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): approx. 6.3kgCartridge Ortofon OM5E: The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback.Audio cable: Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. Drive belt: The drive belt is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight: With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:Hood to place on the housing: 160Stainless steel feet (Pictures 11 and 12), height adjustable, total weight 2520g, diameter 65mm, height 25mm: 90Possible pickups for tonearm TP16, MM systems including installation: AUDIO-TECHNICA VM 95ML (Microlinear): 179 AUDIO-TECHNICA VM 95SH (Shibata): 219AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (Special Line Contact): 699 Possible pickups for tonearm TP16, MC systems including installation: ORTOFON Quintet Red (elliptical): 349 ORTOFON Quintet Blue (elliptical, naked): 549 ORTOFON Quintet Bronze (Fineline): 749 ORTOFON Quinted Black (Shibata): 899 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799Possible SME tonearms including Ortofon VinylMaster Alpha cartridge:SME Series III (picture 12), exchangeable tonearm tube, eff. Mass approx. 5g: 690 SME 3009 improved (Figure 13), fixed headshell, eff. Mass 6.5g: 690SME 3009 S2 improved (picture 14), exchangeable headshell, eff. Mass 9.5g: 690Possible pickups for SME tonearms, MM systems including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata with boron stylus): 890Possible pickups for SME tonearms, MC systems including installation: AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of required components, new internal housing wiring (audio with sommer cable), new headshell cable, setting and adjustment of the various speeds, setting and adjustment of the suspension, checking and setting the tone arm and the pickup, careful cleaning and care of the entire record player, endurance test, acceptance and VDE safety test Stainless steel record weight: With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readj Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend

Restored Thorens TD 125 MKII Turntable Frame Elsbeere SME 3009 PossibleThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on eBay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 125 MKII with Thorens TP16 tonearm Various SME tonearms are optionally available20kg record playerFrame made of solid wild service wood, the rare beauty, with a very fine and slightly shimmering grain. It is one of the rarest and most valuable tree species in Germany. It can live up to 300 years and grow up to 30m tall. The wood of the service tree was voted the most beautiful wood in the world at the Paris World Exhibition. To this day, it is one of the finest woods and is highly valued by carpenters and wood turners, but also by musical instrument makers for its high resilience, elasticity and strength.Please note that wood is a natural product. The grain and color tone will always differ from the item photos.Item description:Pickup: Ortofon OM5EDevice feet: Spikes, height adjustableLimit switch: NoInner plate: metalSpindle: 10mmBasic dimensions: Width: 525mm, Depth: 413mm, Height 97mmThe following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of required components, new internal housing wiring (audio with sommer cable), new headshell cable, setting and adjustment of the various speeds, setting and adjustment of the suspension, checking and setting the tone arm and the pickup, careful cleaning and care of the entire record player, endurance test, acceptance and VDE safety test Housing: The case consists of 40mm solid Swiss pearwood side panels and a 16mm thick MDF base. The surface has been oiled and polished several times. On the back there is the connection panel for all necessary cables. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case bottom. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): approx. 6.3kgCartridge Ortofon OM5E: The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback.Audio cable: Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. Drive belt: The drive belt is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight: With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:Hood to place on the housing: 160Stainless steel feet (Picture 10 and 11), height adjustable, total weight 2520g, diameter 65mm, height 25mm: 90Possible pickups for tonearm TP16, MM systems including installation: AUDIO-TECHNICA VM 95ML (Microlinear): 179 AUDIO-TECHNICA VM 95SH (Shibata): 219AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (Special Line Contact): 699 Possible pickups for tonearm TP16, MC systems including installation: ORTOFON Quintet Red (elliptical): 349 ORTOFON Quintet Blue (elliptical, naked): 549 ORTOFON Quintet Bronze (Fineline): 749 ORTOFON Quinted Black (Shibata): 899 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799Possible SME tonearms including Ortofon VinylMaster Alpha cartridge:SME Series III (picture 12), exchangeable tonearm tube, eff. Mass approx. 5g: 690 SME 3009 improved (Figure 13), fixed headshell, eff. Mass 6.5g: 690SME 3009 S2 improved (picture 14), exchangeable headshell, eff. Mass 9.5g: 690Possible pickups for SME tonearms, MM systems including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata with boron stylus): 890Possible pickups for SME tonearms, MC systems including installation: AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Frame made of solid wild service wood, the rare beauty, with a very fine and slightly shimmering grain. It is one of the rarest and most valuable tree species in Germany. It can live up to 300 years and grow up to 30m tall. The wood of the service tree was voted the most beautiful wood in the world at the Paris World Exhibition. To this day, it is one of the finest woods and is highly valued by carpenters and wood turners, but also by musical instrument makers for its high resilience, elasticity and strength. The following work will be carried out: Revision of electronic and mechanical components, conversion or Installation of required components, new internal housing wiring (audio with sommer cable), new headshell cable, setting and adjustment of the various speeds, setting and adjust Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend

Restored Thorens TD 125 MKII turntable with SME 3009 pear wood frame The description of this item has been automatically translated. If you have any questions, please feel free to contact us. See also this products: Restored Thorens TD 125 MKII Turntable With Sme 3009 IN Pear Wood Restored Thorens TD 125 MKII Turntable Frame Elsberry Sme 3009 Possible Restored Thorens TD 125 MKII Turntable With Sme Tracking Arm 3009 Restored Thorens TD 125 MKII Turntable Also Sme 3009 Possible Restored Thorens TD 125 MKII Turntable Massive Frame Made From Pear Wood Restored Thorens TD 125 MKII Turntable Sme White/Marbled Restored Thorens TD 125 MKII Turntable Sme White/Orange Restored Thorens TD 125 MKII Turntable Sme White/Burgundy Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend

Système à cartouche MM comprenant linstallation : AUDIO-TECHNICA VM 740ML (Microlinéaire) : 339 AUDIO-TECHNICA VM 750 SH (Shibata) : 439 AUDIO-TECHNICA VM 760 SLC (ligne spéciale) : 699Ortofon 2M Rouge (elliptique) : 109Ortofon 2M Bleu (elliptique, nu) : 229Ortofon 2M Bronze (Fineline) : 390Ortofon 2M Noir (Shibata) : 599Ortofon 2M Black LVB 250 (Shibata avec cantilever en bore) : 899 Système MC à cartouche comprenant linstallation : ORTOFON Quintet Rouge (elliptique) : 330 ORTOFON Quintet Blue (elliptique, nu) : 470 ORTOFON Quintette Bronze (Fineline) : 660 ORTOFON Quinté Noir (Shibata) : 940 ORTOFON Cadenza Rouge (Fineline) : 1299 AUDIO-TECHNICA AT-OC9XEB (elliptique) : 279AUDIO-TECHNICA AT-OC9XEN (elliptique, nu) : 369 AUDIO-TECHNICA AT-33EV (elliptique) : 499AUDIO-TECHNICA AT-33PTG/II (microlinéaire) : 599AUDIO-TECHNICA AT-33SA (Shibata) : 799 Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. Le VM Alpha est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme. La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha, puis améliorer la qualité avec la fente daiguille appropriée en utilisant la fente daiguille immédiatement supérieure. Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécu

Revised Thorens TD 125 MKII Turntable Nussbaumholz High-GlossThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound Tonumfang +/- 16 % EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable With Massive Birnenholz FrameThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!You can find even more interesting offers and better prices. Take a look at... Art and Sound GermanyYou will find even more interesting offers and better prices at “Art-and-Sound Germany” Reconditioned 125 MKII in a solid oiled pear wood frame20kg turntablePlease note that wood is a natural product. The grain and color will always differ from the item photos.Our record players are lovingly put together, restored and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:      NoInner plate: metalSpindle: 10mmBasic dimensions:            Width: 525mm, depth: 413mm, height 97mThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of endurance testHousing:The housing consists of 40mm solid pear wood side panels and a 16mm thick MDF base. The surface was oiled and polished several times. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): 6.3 kgOrtofon OM5E cartridge (included):The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Painting work:The turntable, turntable support and tonearm board are painted in Porsche Blue high gloss. Drive belt:The drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Plate weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood:for placing on the housing: 160 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799The housing consists of 40mm solid pear wood side panels and a 16mm thick MDF base. The surface was oiled and polished several times. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensure Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable Black Orange & Sme 3009 Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA).Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay! Restored Thorens TD125 MKII with SME 3009 S2 improvedin black, orange-metallic ATTENTION: The brass tonearm cutting bearing was replaced by the original plastic one!Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing: The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Cartridge MM system including installation:Ortofon VM Red (elliptical, naked): 199Ortofon VM Blue (Fineline): 299Ortofon VM Silver (Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked):199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata): 975 AUDIO-TECHNICA VM 740ML (Dual MM, Microlinear): 339AUDIO-TECHNICA VM 750 SH (Dual MM, Shibata): 439AUDIO TECHNICA VM 760 SLC (Dual MM, special line contact grind): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 Normal 0 21 false false false DE X-NONE X-NONE The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a we Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Restored Thorens TD 125 MKII turntable with SME 3009 in pear wood The description of this item has been automatically translated. If you have any questions, please feel free to contact us. See also this products: Restored Thorens TD 125 MKII Turntable With Sme 3009 Pear Wood Frame Restored Thorens TD 125 MKII Turntable With Sme Tracking Arm 3009 Restored Thorens TD 125 MKII Turntable Also Sme 3009 Possible Restored Thorens TD 125 MKII Turntable Frame Elsberry Sme 3009 Possible Restored Thorens TD160B Mkii Turntable IN Yellow Curry & Sme 3009 Restored Thorens TD 125 MKII Turntable Sme White/Marbled Restored Thorens TD 125 MKII Turntable Sme White/Orange Restored Thorens TD 125 MKII Turntable Sme White/Burgundy Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend

Desired Color! Restored Turntable Thorens TD 125 MKII Desired ColorThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)Individual production! Please note the processing time stated on EbayIndividual production! Please note the processing time specified on eBayYou can choose the color of the housing, top plate and tonearm base yourself.You can choose the color of the housing, the cover plate and the tonearm base yourself.RESTORED by ART-AND-SOUND Restored 125 MKII in your desired colorSolid version 19kgDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Revision workReplacing the electrolytic capacitors, trimmers and ICs on the motor boardCircuit board cleaned and contact tracks preservedAdjustment of the Vienna-Robinson oscillator for speeds 16, 33 and 45Power input board checkedCleaning of all componentsMotor and Camp CareReadjustment of subchassis and suspensionAdjustment of tonearm and pickupFunctional test and test run carried outVDE safety testItem description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmHousing:Painted in your desired color!The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Cover plate:Painted in your desired color!Tonearm base:Painted in your desired color! Pickup:An Ortofon Vinyl Master Alpha is installed. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a Super VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Device feet:Spikes made of chrome-plated stainless steel. So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: Cartridge MC System including installation: Height adjustable, total weight 670g, diameter 43mm, total height 20mmHeight adjustable, total weight 2520g, diameter 65mm, total height 28mm The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. An Ortofon Vinyl Master Alpha is installed. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particula Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

RESTAURÉ par ART-AND-SON 125 MKII restauré avec bras de lecture SME 3009Pièce de créateur - produit design - produit designNos platines sont assemblées, modifiées et assemblées avec amour à la main.Chacun deux est unique et diffère par son modèle, sa couleur, son grain de placage ou dautres détails.Les boîtiers de haute qualité sont restaurés ou nouvellement fabriqués selon un savoir-faire qualifié.Les composants électriques sont vérifiés, Pièces mobiles huilées et pièces dusure remplacées.Un dernier test dendurance complète le travail complexe.Le client reçoit un appareil haut de gamme.Le phonographe travaille avec 220V/50 Hz.Pour lexpédition aux États-Unis, le plateau tournant est converti en 110 V/60 Hz.Description de larticle :Fin de course :     NonPlaque intérieure : métalMandrin de roulement : 10mm Dimensions de base :            Largeur : 52 cm, profondeur : 41 cm, hauteur env.Audio et Les câbles dalimentation sont fermement connectés au plateau tournant. Le logement :Le boîtier se compose de panneaux latéraux en MDF de 40 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Cest très élaboré avec plusieurs couches de peinture métallisée scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière.Façade :Plaque de recouvrement en aluminium 1 mm noir / peinture métallisée bleu glace, plaque de bras de lecture / base de bras de lecture nouveauLa cellule Ortofon OM10 :Avec la série OM, Ortofon crée depuis longtemps la cellule MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. LOM 10 est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme.La série OM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec un OM 10, puis améliorer la qualité avec linsert daiguille approprié en utilisant linsert daiguille suivant.Le câble audio :Câble PME dorigineLe plateau tournant :Le plateau tournant est réalisé en cinq étapes complexes et chronophages poli pour une brillance élevée.Le vernis brillant donne à votre tourne-disque un look unique.Avec scellement de surface à laide dun revêtement protecteur spécial pour éviter le ternissement répété et pour une brillance durable.Pointes en acier inoxydable chromé:Pour que le tourne-disque soit découplé des vibrations basses fréquences, Le châssis est équipé de pointes réglables en hauteur. Les résonances et les retours sont ainsi efficacement évités. La courroie dentraînement :La courroie dentraînement est neuve. Il est fabriqué selon les spécifications originales de Thorens (même matériau et mêmes dimensions). Nouveau poids record en acier inoxydable :Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence. En lutilisant, vous augmentez les performances sonores de votre système. suivant Parties sont comme Accessoiresör euhunliltique et pas ingrédient ce enchères:capot (à poser sur le cadre) : eBay-Numéro darticle 112401191474Le suivant parties sont disponible comme accessoires et pas compris dans ce enchères:Capot (à mettre sur le boîtier):    eBay allemand-article nombre est 112401191474Systèmes à cartouche MM avec installation : Systèmes Cartidge MC avec installation :Le boîtier se compose de panneaux latéraux en MDF de 40 mm et dune base de 16 mm dépaisseur fabriquée dans le même matériau. Cest très élaboré avec plusieurs couches de peinture métallisée scellé et poli avec un ponçage intermédiaire approprié. Le panneau de connexion pour toutes les connexions de câbles nécessaires est situé à larrière. Avec la série OM, Ortofon crée depuis longtemps la cellule MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. LOM 10 est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme. Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans l

Technisch und optisch einwandfrei. Geliefert wird das Teil wie auf dem Foto. Passt auf Tonarme der TP16 Familie. Dieser Artikel unterliegt gem. § 25a UStG der Differenzbesteuerung, ein Ausweis der Mehrwertsteuer auf der Rechnung erfolgt nicht.

Restored Thorens TD 125 MKII Turntable Sme White/Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.RESTORED by ART-AND-SOUND Restored 125 MKII with SME 3009 tonearmDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmAudio and Power cables are firmly connected to the turntable. The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm brushed stainless steel, tonearm board / tonearm base newThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Original SME cableThe turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 112401191474The following parts are available as accessories and not included in this auction:Hood (to put on the housing):    German eBay-article number is 112401191474Cartridge MM systems including installation: Cartidge MC systems including installation:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strai Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

In Desired Color! Revised TD 125 MKII Turntable with SME 3009 The description of this item has been automatically translated. If you have any questions, please feel free to contact us. See also this products: Desired Color! Revised Thorens TD 125 MKII Turntable Sme 3009 Series III Revised Thorens TD 125 MKII Turntable Black Orange & Sme 3009 Tracking Arm Restored Thorens TD 125 MKII Turntable With Sme Tracking Arm 3009 Desired Color! Restored Turntable Thorens TD 125 MKII Desired Color Revised Thorens TD 125 MKII Turntable Orange White Also With Sme Possible Restored Thorens TD 125 MKII Turntable With Sme 3009 IN Pear Wood Restored Thorens TD 125 MKII Turntable Also Sme 3009 Possible Restored Thorens TD 125 MKII Turntable With Sme 3009 Pear Wood Frame Ausländisches Produkt Ja Herstellernummer nicht zutreffend Marke Thorens - Restauriert von Art-and-Sound Modell TD 125 MKII Modifizierter Artikel Ja Herstellungsland und -region Deutschland Antriebstyp Riemenantrieb EAN Nicht zutreffend