CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

A resistor for aTannoy ST-100 speaker.

CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

A resistor for aTannoy ST-100 speaker.

CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

A resistor for aTannoy ST-100 speaker.

CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

A resistor for aTannoy ST-100 speaker.

CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

CVS 4 s a coaxial two way speaker with switchable control to hook up to a standard amplifier & 6 ohms, or to a 70volt / 100volt system These are in excellent condition and have been tested and sound very good. Surrounds are rubber and perfect. I have more of these, so if you want additional speakers see my other auctions Each speaker can measures 8.5” across the face 7” inner opening ( the hole it fits into) 9” tall front to rear Specs: The CVS 4 is a compact 160-Watt ( 80 Wpc) ceiling loudspeaker engineered to provide superb audio performance in both background and foreground music sound systems. Ideally suited for a wide variety of applications, from restaurants and hotels to houses of worship and businesses of all types, the CVS 4 offers the power handling, wide frequency response and low distortion more typically found in a studio reference monitor than a ceiling loudspeaker. The resulting sound is warm, with a nuanced and pristine clarity that envelopes the listener – without intruding. Exceptional Sound and Reliability Exceptional Sound and Reliability The design comprises a 100 mm (4.00) mid bass driver with a coaxially mounted 19 mm (0.75) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability. This compact unit is specifically designed for applications requiring the combination of excellent sonic quality for music and speech reinforcement and exceptional reliability. Comprehensive Installation Package Comprehensive Installation Package Supplied with an integral zinc-plated steel back can, with recessed termination box, the CVS 4 satisfies the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and “loop through” facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory. Specification Show less System Frequency response (-3 dB)1 85 Hz - 19 kHz Frequency response (-10 dB)1 77 Hz - 22 kHz System Sensitivity (1 W @ 1 m)2 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average) 109 dB (peak) Power Handling3 Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance operation 100 V: 30 W / 15 W / 7.5 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00) mineral loaded cone material High Frequency 19 mm (0.75

Verkaufe meine Tannoy St100 SuperTweeter Da ich meine Anlage umgestellt habe und verkleinere. Die Hochtöner befinden sich in einwandfreiem Zustand und sind nur kurze Zeit im Einsatz gewesen. Ich bin der Erstbesitzereuvp ca. 1600 euro Dabei ist sämtliches Zubehör wie auf dem Foto ersichtlich. Incl. 2 Kimber Anschlusskabel Anschauen und testen ist gerne möglich. Versand ebenfalls Privatverkauf. Keine Garantie oder Rücknahme meinerseits

A resistor for aTannoy ST-100 speaker.

A resistor for aTannoy ST-100 speaker.

Tannoy SFX Surround Sound Front/Rear Satellite Speakers (Pair) You will receive a stereo pair (2 speakers)Enclosure Type: 2-way closed boxRec Amplifier: 15 - 100 WattsFQ Response: 140Hz - 78kHzCrossover FQ: 4.5kHzSensitivity: 85dBImpedance: 6 OhmsDrivers: 1 x 15mm titanium dome with Neodymium magnet1 x 75mm paper coneDimensions: 97 x 140 x 95mm (W x H x D)Weight: 0.75kg / 1.65lbsYear: 2009 We have 2 pairs available and the pictures are a mixture of both. They have been tested and both woofers and tweeters work fine. cosmetic condition is very good with both speakers being very similar, no major marks or scratches on either set. Free shipping included with 48hr delivery to most UK post codes available at checkout. Price includes VAT. This item is covered by our 60 day no quibble guarantee* *If the item malfunctions in the first 60 days and once we have received it back we will reimburse the full item price plus your postage costs. Normal wear and tear, accidental damage, issues caused by inappropriate use, failure of a consumable part (e.g bulb, seal or battery) or an issue already specifically mentioned in the description will not be covered.

TANNOY SFX Active Powered Subwoofer The Tannoy TFX sub is easy easy to integrate into your Hi-Fi or home cinema system thanks to its flexible high/low level input options, variable volume, frequency and phase controls.Phase control, frequency control, volume controlPowerful 8 inch drive unitType: Ported Bass ReflexAuto standby100 watts RMSInputs are 2 x line level phono & high level speakerFrequency response: 45Hz - 140HzDimensions (HxWXD): 345x250x370mmWeight: 9.0kgCondition: All functions/controls and inputs operate normally, the sub is in full working order and sounds excellent with no unwanted resonances or distortion. There are some marks on one of its sides (last picture) but condition is otherwise good, please see the pictures which are of the actual item. You will receive: 1 x Tannoy SFX Subwoofer 1 x Power cable (UK) Free 48hr delivery to most uk areas. Price includes VAT. This item is covered by our 60 day no quibble guarantee* *If the item malfunctions in the first 60 days and once we have received it back we will reimburse the full item price plus your postage costs. Normal wear and tear, accidental damage, issues caused by inappropriate use, failure of a consumable part (e.g bulb, seal or battery) or an issue already specifically mentioned in the description will not be covered.