talk electronics amplifier and CD player cyclone 1.1 + thunder 1.1. Both CD player and amplifier worked perfectly fine unfortunately A speakers one channel is louder than the other B speakers are working perfectly fine and the CD player has a bit of fog on the display please see pictures and the amplifier does have a few marks on top please see pictures item is missing the original remote and please feel free to ask me any questions thank you

most of the items in box are unused

PLANTRONICS SHS1890-10 6-WIRE PUSH-TO-TALK PTK AMPLIFIER WITH 10 COILED CABLE Used in good working condition

TALK ELECTRONICS CYCLONE 1.2 INTEGRATED AMPLIFIER. This is an analog amplifier in very good condition, no scratches or visible damage. This matches well with a network player or CD player and can handle tower speakers easily as the 80W are conservatively rated. The Edwards (successor company of TE) brand support the amplifier should you need repair in future. All inputs work except AUX. SPECIFICATION Power output 20-20K 8 Ohms 80W Distortion 1KHz 10W 8Ohms <=0.01% S/N Ratio. <= -80dB A weighted <= -62dB unweighted +/- Dimensions H.W.D in mm excluding connections 93x430x300 Weight packed 8.90kg un-packed 7.50kg FRONT PANEL USING THE FRONT PANEL CONTROLS Mute: this button mutes the amplifier’s output. It does not disconnect the Cyclone from the mains supply. Push it once to silence the amplifier and push it again to restore the audio output. The blue LED above this button will illuminate when the amplifier is connected to the mains supply and switched on via the rear panel rocker switch. The red LED indicates whether the amplifier’s output is operational: if it is glowing the amplifier’s output is connected; if it is not the amplifier’s audio circuits are muted. If for any reason the blue LED is illuminated but the red LED will not come on when the mute button, or any input button, is pressed then your amplifier is in protection mode and should be returned to your dealer for examination. CD: select this button to listen to your CD player or any other source you have connected to the CD input. Tuner: select this button to listen to your tuner or any other source you have connected to the Tuner input. Aux: select this button to listen to any line level source you may have connected to it. AV: select this button to listen to your VCR, Laserdisc player or any other line level source you have connected to the AV input. See also section on Optional 6 Channel AV Buffer Tape 1: select this button to listen to your cassette deck or any other source you have connected to the Tape 1 input. Tape 2: select this button to listen to your cassette deck or any other source you have connected to the Tape 2 input. Monitor: On Cyclone 1.2 models only. You can only monitor Tape 1. When tape monitor is selected the LED above the Monitor button will glow green. To deselect the monitor function simply press the Monitor button again. Note: when switching inputs the mute light will flash momentarily as the switching software mutes the output to avoid clicks and bangs. Volume: this rotary control, not surprisingly, adjusts the amplifier’s audio output.

Great piece of history with power supply cord. This is untested but looks like it’s ready to work. Guys are all intact from what I can tell. Please make an offer or buy now for quick shipping

For sale one Edwards Audio integrated amplifier, model 1A2R which Ive had from new. The amplifier is in excellent condition, near mint and sounds terrific through my Linn Kan speakers. The only reason for sale is Ive gone for a pre and power set-up, Edwards Audio of course. The amp comes with mains lead, manual and original box and packaging.

talk electronics amplifier and CD player cyclone 1.1 + thunder 1.1. Both CD player and amplifier worked perfectly fine unfortunately A speakers one channel is louder than the other B speakers are working perfectly fine and the CD player has a bit of fog on the display please see pictures and the amplifier does have a few marks on top please see pictures item is missing the original remote and please feel free to ask me any questions thank you

Good used condition, clean, bench and audio tested. Controls lubricated with DeoxitSupplied with new power cord. (70 volt output screw included) Features , LED output display and microphone talkover. The PT210 PA Amplifier 120W from Pyle is a versatile, small format mixer/amplifier ideal for a variety of uses. The PT210 can be used with 110/220V power for versatility. It also features 4,8, and 16 ohm and 70-volt screw terminal connector outputs. This mixer has inputs for 2 microphones plus an auxiliary input. Multiple output options include series and parallel plus a headphone output for flexibility.

talk electronics amplifier and CD player cyclone 1.1 + thunder 1.1. Both CD player and amplifier worked perfectly fine unfortunately A speakers one channel is louder than the other B speakers are working perfectly fine and the CD player has a bit of fog on the display please see pictures and the amplifier does have a few marks on top please see pictures item is missing the original remote and please feel free to ask me any questions thank you

The main function of the 50W RF power amplifier is to amplify the original low power of the 400-470MHZ wireless transmitting device, so that the small device has a large power to make the communication distance farther and clearer. The product integrates a dedicated high-speed program-controlled RF watchdog, which can drive the half-duplex automatic transmission and reception conversion circuit at high speed. It is suitable for all U-segment intercoms and digital transmission equipment on the market, and can perfectly support digital DMR, DPMR, P25, C4FM, SFK frequency hopping. And traditional linear simulation mode. specification: Input power: 1-5WOutput Power : 20W-50W maxTransmission frequency: 400-470MHZReceiving frequency: 50-1000MHzWorking mode: half duplex (cannot be received in the transmitting state)Receive loss: -1DB ±0.4Output power: 25-45WSupply voltage: 10-13.8VStandby current: about 10-30mA Cooling method: housing + heat sink for natural heat dissipation, low noise and quietMinimum size: 125MM*75MM*60MM How to connnect:The red wire is connected to the positive pole of the power supply +12V, with the black wire connected to the negative pole of the power supply. The small SMA threaded port is connected to the intercom through the cable, and the large M head is connected to the transmitting antenna.

Vintage 1977 Sony TA-N7B Power Amplifier Low Crosstalk And High QualityInternational Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

talk electronics amplifier and CD player cyclone 1.1 + thunder 1.1. Both CD player and amplifier worked perfectly fine unfortunately A speakers one channel is louder than the other B speakers are working perfectly fine and the CD player has a bit of fog on the display please see pictures and the amplifier does have a few marks on top please see pictures item is missing the original remote and please feel free to ask me any questions thank you

***One speaker wire imput has issue see pics, attach to wire or repair*** Pyramid PA205 PA Amplifier w/Mic Talkover 120W. ***SEE PICS***Pyramid PA205 PA Amplifier w/Mic Talkover 120W. ***SEE PICS*** Ready to Ship!

talk electronics amplifier and CD player cyclone 1.1 + thunder 1.1. Both CD player and amplifier worked perfectly fine unfortunately A speakers one channel is louder than the other B speakers are working perfectly fine and the CD player has a bit of fog on the display please see pictures and the amplifier does have a few marks on top please see pictures item is missing the original remote and please feel free to ask me any questions thank you

TALK ELECTRONICS CYCLONE 2.1 INTEGRATED AMPLIFIER. Sold as spares or repair, but the unit is fully working, but has a crackle on the left channels, independent of which RCA source is used. May need recapping? Apart from that the unit is in super cosmetic condition, with no scratches or dings, but not the shaft for the volume knob is slightly out of true, so the knob moves in an arc when turned, but works fine. Probably a quick straighten with pliers would do it once you have the case off. A super amp, just needing some TLC. Ships with power cable and original manual. The Talk Electonics Cyclone 2.1 is a fully complimentary Class AB mosfet design biased towards Class A operation. The use of a bigger transformer coupled with higher-quality capacitors and improved circuit design has resulted in a conservatively-rated 100 Watts into 8 Ohms. Although it has a relatively simple industrial design, it's almost flashy when compared to the models from Creek and Naim. The faceplate has been machined into two planes, the higher separated from the lower by a line that suggests a gently rolling wave. The increase in muscularity over the Cyclone 1.1 has to be heard to be believed - loud orchestral passages and choral music is even more powerful and the additional scale and dimension given to a performance can only be described as awesome. The greater power reserve inherent in this amplifier means that more subtle and delicate music - string quartets and unaccompanied female vocals - is projected into the room with hugely impressive control and poise. Music becomes more effortless - 'hi-fi' terminology such as 'a more liquid sound' has been used in the past to describe this amplifier. The Talk Electronics Cyclone 2.1 is a truly exceptional amplifier that simply must be heard. Specifications : Inputs...............................................4 Inputs & 2 Tape Inputs Outputs............................................2 Tape Outputs & 1 Preout Output Power....................................100w/c @ 8 ohm ....................................170w/c @ 4 ohm THD..................................................0.025% 20-20KHz @ 1W Signal to noise Ratio..........................79dB ref 1W - 107dB full output Frequency response..........................10-100kHz +/- 1dB Transformer.......................................350VA Dimensions(w x d x h)........................41 x 34.5 x 16cm Weight..............................................11kg Miscellaneous : Box..................................................Yes Remote.............................................Yes Made in.............................................UK, England Condition...........................................9/10

For sale one Edwards Audio MM1 MK2 Phono Preamplifier (BRAND NEW). This phono stage is a big leap from the standard phono-stage in most amplifiers and is very well regarded.Edwards Audio equipment is all British made to a very high standard and are known for their superb design and engineering.Bought to partner my Edwards Audio Integrated Amp which is also up for sale as Ive gone for a Pre/Power setup (Edwards Audio) so it never actually got used and remained unopened. The Phono Pre-Amp is brand new. unused and still sealed, the packaging box was opened to take photos.

PLANTRONICS PUSH TO TALK AMPLIFIER PART# 60825-15.

talk electronics amplifier and CD player cyclone 1.1 + thunder 1.1. Both CD player and amplifier worked perfectly fine unfortunately A speakers one channel is louder than the other B speakers are working perfectly fine and the CD player has a bit of fog on the display please see pictures and the amplifier does have a few marks on top please see pictures item is missing the original remote and please feel free to ask me any questions thank you

Pocketalker Ultra Williams Sound Personal Amplifier. Not new, in clean condition. This does work. The only issue I see is that one of the covers on the headphones has a split in the fabric. It looks like any earbud or headphone that has the correct plug would work on this. I believe it is complete, only comes with what is shown. Takes AAA batteries, not included. SALE TERMS: The items being offered in this auction are in as found condition from local estate sales. All pieces are sold AS IS and may have been in storage, so I do not know their age. I will do the best that I can in my descriptions and offer any further information or pictures you may require via email. I am not an expert in many of the items that I sell, if I make a mistake, I will do the best that I can to correct it, so please contact me if you do not get what you expect. I do this as a hobby, not as a business. Shipping weight is about 2 lbs. I use the Post Office for shipping. No pick up please. Multiple winning auctions can be combined for reduced shipping costs if won at the same time. Any shipping cost displayed is to a US destination only. Thanks for looking.

PLANTRONICS PUSH TO TALK AMPLIFIER PART# 60825-15.

It works. Unfortunately, there are no headphones included, but it works with my normal headphones. Please see photos. This is the only one I have. I sometimes travel for work (where I sometimes find my treasures), so that is why I selected that it might take me 3 days to ship. If I am at home, I will ship ASAP. Ships from Milwaukee, WI. Thank you for considering the purchase! Your purchase really helps my family! PLEASE! If there are issues, contact me and give me a chance to make it right before you leave bad feedback.

Talk Electronics Tornado 3 Power Amplifier please read description. Sold as spares and repairs it does work except it has a slight hum when on and switch is a bit lose.