Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

???? Product Information: Perfect for Pros and On-the-Go Sound That Rocks: These speakers may have a lower signal-to-noise ratio compared to modern alternatives, but they excel in delivering great-sounding music. With 4 ohm loads, both channels driven, they cover frequencies from 60Hz to 15,000Hz, offering impressive performance. Amplifier Section: Equipped with an L-shaped stereo unimatch plug, these speakers have an impedance of 100 ohms at 1kHz, ensuring compatibility with various devices. Speaker Section: The full-range, bass-reflex enclosure design and magnetically shielded structure provide high-quality sound without interference. They have a nominal impedance of 4 ohms and can handle a nominal power of 20W+20W, with a maximum capacity of 40Wx40W. Measurements: Compact in size, these vintage Sony speakers measure 5 3/8 x 8 x 7 1/2 inches, making them versatile for various setups. ???? Condition: These Vintage Sony Speaker System Amplified Active SRS-150 have been thoroughly tested and are in excellent working condition. The sound is crisp and clear, a testament to the quality craftsmanship of vintage Sony speakers. They may even outperform some newer alternatives. For your peace of mind, please review the provided images to ensure they meet your expectations before making your purchase. ???? Additional Information: Take advantage of our combined shipping options by exploring our range of unique products. Please note that while we strive to provide accurate representations, the actual color of the product may vary slightly due to photographic lighting and differences in viewing devices. We are committed to ensuring a seamless shopping experience. If you have any questions, require further details, or need assistance with any of our products, please dont hesitate to reach out.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

International bidders are welcomePlease ask your questions before bidding / buying! The T.amp S-150 MK2Professional Power Amplifier / Endstufe / Vollverstärker / Verstärker Sie erhalten eine Rechnung mit ausgewiesener Mehrwertsteuer. Hochwertige, professionelle Power Endstufe von The T.amp, Modell S-150 MK2.Der Vollverstärker besticht durch seine hervorragende Verarbeitungsqualität.Optischer Zustand: Das Gerät befindet sich optisch in einem gebrauchten Zustand mit sichtbaren Gebrauchsspuren / Kratzern (sehen Sie sich die Fotos vor dem Kauf bitte genau an).Technischer Zustand: Das Gerät ist voll funktionstüchtig.Inkl. StromkabelIncl. power cable Technische Daten2 x 150 W an 4 Ohm2 x 85 W an 8 Ohmsymmetrische Inputs mit XLR u. KlinkeBrückenbetrieb möglichSpeaker Twist und Klemmanschlüsse für LS OutEingangsempfindlichkeit von 0,775 Vrms auf 1,4 V rms umschaltbar, bzw auf 26 dB Gain schaltbarDämpfungsfaktor > 150konvektionsgekühlt (ohne Lüfter)19, 2 HE, 32 cm tief (ohne Griffe)Gewicht 11,5 kg (6408)Unsere Geräte sind mit einem Siegel gekennzeichnet. Wir weisen ausdrücklich darauf hin, dass die Gewährleistung / Rücknahme erlischt, wenn das Siegel beschädigt oder entfernt wird.Lieferumfang: wie abgebildet / OHNE weiteres ZubehörGute und sichere Verpackung wird garantiert. Sollte sich ein Problem ergeben...... Kontaktieren Sie uns bitte, bevor Sie sich an eBay wenden oder uns eine negative Bewertung geben! Denn für jedes Problem gibt es eine Lösung!Unser Service-Team beantwortet gerne Ihre Fragen!Wir werden uns um Ihre Zufriedenheit bemühen und das Problem lösen. Should a problem arise...... Please contact us before contacting eBay or giving us negative feedback! Because for every problem there is a solution!Our service team will be happy to answer your questions!We will strive for your satisfaction and solve the problem.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Preamplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny knicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state preamp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid state offerings at that time. The sound quality is rivaled today only by new much more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!!This ML-1 Preamp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cables. Either already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Preamplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny knicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state preamp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid state offerings at that time. The sound quality is rivaled today only by new much more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!!This ML-1 Preamp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cables. Either already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Preamplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny knicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state preamp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid state offerings at that time. The sound quality is rivaled today only by new much more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only.

Mark Levinson ML-1 Solid-State Modular Stereo Preamplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny knicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state preamp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid state offerings at that time. The sound quality is rivaled today only by new much more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only.

The T.amp S-150 MK2 Professional Power Amplifier Endstufe Vollverstrker. Ecke verbogen Keine Rcknahme, keine Garantie

The T.amp S-150 MK2 Professional Power Amplifier Endstufe Vollverstärker.

SONY SRS-150 Amplified Active/Passive Speaker System Set Tested Made In Japan.

Mark Levinson ML-1 Solid-State Modular Stereo Preamplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny knicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state preamp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid state offerings at that time. The sound quality is rivaled today only by new much more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood.

Thomann t.amp S-150 Mk II 2 x 150 W (4ohms) Audio Power Amplifier * 2 x 150 W at 4 ohms * 2 x 85 W at 8 ohms * Balanced inputs with XLR and jack * Bridgeable * Speaker Twist and binding post outputs for LS Out * All protection circuits including Softstart * Switchable input sensitivity of 0.775 Vrms to 1.4 Vrms, or can be switched to 26 dB Gain * Damping factor > 150 * Convection cooled (no fan) * 19, 2U, depth 32 cm (without handles) * Weight 11.5 kg In Very good working condition. Great sound. CH-2 XLR receptor slightly looks to the left side, but its functional. In the original box No power cable included.