Marantz Model 1250 Integrated Amplifier With wood cabinet UsedDescriptionAbout This ItemsI was able to enter and output, but the contact of the LCH was slightly poor and the sound was somewhat unstable.Panel operation: Each operation reacted, but there is a gully.ConditionThere are small scratches and dirt associated with use.Wood cabinets have scratches, peeling of veneers, and dirt.Included ItemsWood cabinetShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

just installed this in my pionner sx 1280 see pic as seen 13 lamp kit all .priced cool cool blue .PIC NICE.

just installed this in my pionner sx 1250 see pic as seen 13 lamp kit all .priced cool cool blue .PIC NICE.

Heres a very nice 1250. NOT MINT! It does have some scratches and a few other marks. Theyre not bad at all though. Its still a very presentable piece. One thing to note is that it was used in a studio for a long time. They smoked in the studio, so it has a smell to it. Its not a fresh cigarette smell though. This amp was in storage for over 5 years. Also the coloration of certain areas inside of the unit may be present. The amplifier is mostly stock. The face panel was cleaned. It was dusted off, and all the controls were DeoXed recently. At the same time the power indicator bulb was replaced. And it was biased for proper performance in it current condition. This amplifier sounds great as is, but again..the service performed to it was limited. If youre buying it to keep as a personal unit it will be recommended to have it restored for a more reliable and enjoyable future. PLEASE LOOK AT ALL OF THE PICTURES PROVIDED AND ASK FOR MORE IF NEEDED. PLEASE ASK ALL QUESTIONS YOU MAY HAVE. THE MAJORITY OF MY ITEMS ARE SOLD AS IS DUE THEIR NATURE AND RARITY. SOLD AS IS. NO RETURNS. NO REFUNDS. Shipping quote is only for the Continental U.S.A Shipped and insured with UPS or FedEx most of the time.

Atomic bomb of an amplifier: NuPrime IDA-8, complete in box with manuals, remote, and rare, discontinued BTR-8 bluetooth receiver. This integrated amplifier the size of a hardcover book has a toroidal transformer and can put out a real, beautiful 100wpc into 8 ohms AND 4 ohms. And it also has a USB/optical DAC. And it also has Bluetooth. Seriously! Oh, and it sounds good as hell. Works great. Perfect condition aside from a few small spots on the top (pictured). These are hard to notice imo.

Item TitleDescriptionMarantz Model 1250 State Integrated Amplifier AC100V vintage Input/output: Input/output was possible, but the contact of Lch is a little bad and the output sound is a little unstable. This is a limited 5-day exhibit.Through Friday, June 2 Model Pre-main amplifierRated output (20Hz-20kHz, both channels driven) 130W+130W (8?)Frequency response 20Hz to 20kHz ±0.25dBTotal harmonic distortion (20Hz to 20kHz) 0.1% or lessModulation distortion (20Hz to 20kHz) 0.1% or lessPower bandwith 5Hz to 50kHzDamping factor 65 or better (8 ohm load)Gain Phono ? Preamp output: 58dBPhono ? Recording output: 40dBHigh level ? preamplifier output: 18dBInput impedance Phono: 47k?High Level: 60k?Input Sensitivity Phono:1.8mVAux: 180mVPhono input equivalent noise 0.85?V (input conversion value)Filter High:9kHzLow: 30HzPower supply AC100V, 50Hz/60HzPower consumption 450WDimensions (width and height are panel dimensions) W390 x H146 x D316mmWeight 18.5kg ?If there is something you are looking for, please feel free to contact us.? If there is a discrepancy between the photo and the description on the product page, the photo will be considered as the correct one.Thank you. Shipping Standard Shipping ( Japan Post , FedEx , DHL ) The package will arrive 5-14 days after shipment. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If there is a remote charge for your address we will charge you for additional shipping.Thank you for your understanding. ReturnsReturn Policy. We value your satisfaction with our service. We have an unconditional return policy if notified within 60 days of receipt ( time limits vary by item ). All returns must be in original condition. Once the product has been used, it cannot be returned. Returns must be made within the time limit upon receipt of the merchandise.Please contact us first for return before you ship it back to us.Thank you !

Atomic bomb of an amplifier: NuPrime IDA-8, complete in box with manuals, remote, and rare, discontinued BTR-8 bluetooth receiver. This integrated amplifier the size of a hardcover book has a toroidal transformer and can put out a real, beautiful 100wpc into 8 ohms AND 4 ohms. And it also has a USB/optical DAC. And it also has Bluetooth. Seriously! Oh, and it sounds good as hell. Works great. Perfect condition aside from a few small spots on the top (pictured). These are hard to notice imo.

just installed this in my pionner sx 1250 see pic as seen 13 lamp kit all .priced cool cool blue .PIC NICE.

just installed this in my pionner sx 1280 see pic as seen 13 lamp kit all .priced cool cool blue .PIC NICE.

Überblick Ausgangsspannung Für Verbraucher bis max. 1.Beschreibung Kompaktes Netzteil mit Weitbereichseingang. Durch die Zulassung nach EN60601 sind die Geräte auch im medizinischen Bereich verwendbarEigenschaften Kurzschluss- und Überlastschutz mit automatischem Wiederanlauf · DC-Hohlstecker 5,5 x 2,1 mm, Polarität + innen · Ausgangskabel ca. 1,8 m · Sicherheit nach TÜV, cULLieferumfang Netzkabel · Bedienungsanleitung Informationen zur Entsorgung von Elektro-/Elektronikgeräten und Batterien finden Sie bei unseren AGB.

just installed this in my pionner sx 1280 see pic as seen 13 lamp kit all .priced cool cool blue .PIC NICE.