Extron Electronics Super High Resolution (Hi-Res) 6BNC Snake 25’.

Extron Electronics Super High Resolution (Hi-Res) 6BNC Snake 100 Ft..

Extron Electronics Super High Resolution (Hi-Res) 6BNC Snake 50 Ft..

Extron Electronics Super High Resolution (Hi-Res) 6BNC Snake 12.

Extron Electronics Super High Resolution (Hi-Res) 6BNC Snake 25’.

RARE VINTAGE THORENS TD126 MKiii ELECTRONIC TURNTABLE SUPERB EXAMPLE COLLECTION ONLY. OVERALL CONDITION: EXCELLENT EXCEPT FOR THE DUST COVER WHICH HAS LIGHT SCRATCHES, BLEMISHES AND THREE HAIR LINE CRACKS. PLEASE VIEW AND ZOOM ONTO PHOTOS FOR CONDITION. * Fully serviced, bench tested and in full working order. * NEW belts. * NEW suspension springs calibrated. * Speed calibrated. * NEW capacitors on control circuit. * NEW pilot lamps. * NEW mains and phono leads. * All set up and ready to go. PHOTOSare considered part of the description. What you see in the photos is exactly what you get. Please view and zoom in on all pics for more details and a better understanding of the quality. INCLUDED Shure M75ED Type II Cartridge & Stylus (Both in excellent condition). DESCRIPTION Semi-professional Transcription Turntable. Without doubt the best transcription turntable on the market. Servo controlled electronic belt-drive system with DC motor - a THORENS design. Load-correcting automatic pitch control (APC). ISOTRACK TP16 Mk III tonearm with very low effective mass Low resonance tonearm tube utilising split wave technology. Friction-free velocity-sensing electronic shut-off. Separate motor for the tonearm lift operation. Three speeds 33, 45 and 78 rpm Precision craftsmanship to meet the highest professional standards. The TD 126 Mk III by Thorens is the transcription turntable for discriminating music lovers and professional users. It is the product of 95 years experience in the construction of musical instruments allied to the mastering of the most advanced technology in the fields of fine mechanics and electronics. The main objective of Thorens engineers remains unchanged; robustness, reliability and life-time maintenance of the original performance specification. In their constant battle against rumble, Thorens designed a servo controlled electronic belt-drive to associate with unique floating suspension system. Every turntable must be damped by a suspension system to prevent the sensitive pick-up from environmental vibration and from acoustic feedback. If the springs are placed between motor and turntable platter, they then fulfill the additional requirement of decoupling motor vibrations almost completely from the turntable and the pick-up system. The turntable platter and the tonearm are both mounted on a secondary chassis carrying the motor. Thanks to their exclusive design, Thorens Transcription turntables claim rumble figures equalled by no other drive system. THORENS ISOTRACK TP 16 Mark III tone arm For optimum in tracking ability, it is not sufficient that a tone arm has just low bearing friction. It is much more important that is has a low effective mass, because high mass prevents the stylus from following the imperfections from warp or ripple of the record as it should. To overcome high effective mass one can increase the stylus force, but this results in excessive record wear. Thorens has solved the effective mass problem by removing any unnecessary weight from the tone arm. The head shell is reduced to a shielding device, and the detachable connector is placed close to the pivots where it has negligible influence on the effective mass. In addition, Thorens Isotrack is a straight arm and not S-shaped. The necessary offset angle is independent of the arm shape. Typical arms have effective masses of around 15 grammes. The Thorens Isotrack is half this figure, allowing it to track at the lowest possible stylus pressures. A special surface treatment of the tone arm tube - split wave technology - absorbs all undesirable resonances of the tone arm. It has friction-free velocity-sensing electronic shut-off. As the lead-out grooves of records show a higher pitch - i.e. the grooves are further apart from one another - the tonearms nominal speed increases while moving towards the center of the platter. An electronic circuit picks up the signal produced by the change in the tonearm velocity and commands the motor to stop and the tonearm to raise. The precision associated with Thorens turntables is further emphasised here, since the activation of the auto stop process is not position sensitive, but fully electronic and friction-free. The Thorens automatic stop system also enables the operator to cue with studio precision at any point on a disc, even at the very centre. Another circuit prevents the activation of the auto stop process when the tonearm is moved by hand over the disc surface. A separate motor is used for the tonearm lift operation. Specifications: Drive System: 1 step belt-drive Motor: DC Motor with 72 pole tachogenerator Speed: 33, 45 and 78 rpm electronic speed selection Motor Speed Control: Electronic regulation with load correcting automatic pitch control Pitch Control: 6% illuminated stroboscope Turntable Platter: 3,2 kg zinc alloy dynamically balanced Platter Diameter: 30 cm (12) Wow & Flutter: Less than 0,035% according to DIN 45507 Rumble Unweighted: -52 dB according to DIN 45539 Rumble Weighted: -72 dB according to DIN 45539 Rumble Measured with the THORENS Rumble Measuring Device: Rumble Unweighted : -65 dB according to DIN 45539 Rumble Weighted : -78 dB according to DIN 45539 Tonearm TP 16 Mk III Cartridge Wand TP 63 Tonearm Lenght: 230 mm (9) Effective Mass: 7,5 g Stylus Overhang: 14,4 mm Offset Angle: 22 Lateral Tracking Error: Less than 0,18/cm radius. Skating Compensation: Magnetic force without friction. Stylus Pressure Appliance: by spring Bearing Friction: Less than 0,15 mN (15 mp) in bith planes. Cartridge Fitting: Standard centres Capacitance of Cable: 190 pF 10%. Auto Stop: Electronic velocity sensor Mains Voltage: 117/220 V, 50/60 Hz Power Consumption: 11 Watt Dimensions: (W x D): 505 x 395 mm Height with cover closed : 170 mm Height with cover open : 460 mm Depth with cover open : 395 mm Weight: 15 kg, (33 lbs

Sony Discman ESP D-265 Super Electronic Shock Protection 1bit DAC. Tested and works under battery power. No a/c adapter or original headphones. Ships USPS first class

Extron Electronics Super High Resolution (Hi-Res) 6BNC Snake 12.

Features: Official NINTENDO MerchandiseWireless Bluetooth TechnologyAdjustable Headband