The phonograph works with 220V/50Hz. For shipping to the USA the turntable is converted to 110V/60Hz.RESTORED by ART-AND-SOUND 160 with SME tonearm Series IIIItem description:Limit switch:    NoInner plate:             metalSpindle:                   10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is elaborate with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The bottom of the case is equipped with three openings for horizontal alignment of the turntable.New faceplate:New cover plate made of 1mm brushed stainless steelNew Ortofon Vinyl Master Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.New audio cable:Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Turntable feet:Four height-adjustable spikes made of chrome-plated stainless steel. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): eBay-item number 112409195158Hood big (for placing on the substructure):  eBay-item number 112411582098The following parts are available as accessories and not included in this auction:Hood small (to put on the housing):   German eBay-article number is 112409195158Hood large (to put on the base):           German eBay-article number is 112411582098Cartridge MM systems including installation:Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your

RESTORED and MODIFIED by ART-AND-SOUND Restored 125 MKII with SME 3009 tonearmDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmAudio and Power cables are firmly connected to the turntable. The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm gold anodized aluminumThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Original SME cableThe turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 112401191474The following parts are available as accessories and not included in this auction:Hood (to put on the housing):    German eBay-article number is 112401191474Cartridge MM systems including installation: Cartidge MC systems including installation:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strai

Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)! Bei Selbstabholung 70,00 € Rabatt!Restauriert von Art-and-Sound THORENS TD 146 mit SME 3009 und Endabschaltung Achtung: Die Tellermatte auf den Bildern, wird durch die originale Tellermatte von Thorens ausgetauscht! Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt, modifiziert und montiert. Jeder von ihnen ist ein Unikat und unterscheidet sich in Modell, Farbe oder Furniermaserung. Die hochwertigen Gehäuse werden in qualifizierter Handwerksarbeit restauriert oder neu angefertigt. Elektrische Bauteile werden überpüft, beweglichen Teile geölt und Verschleißteile ausgetauscht.Einen abschließender Dauerlauftest runden die aufwendigen Arbeiten ab.Der Kunde erhält ein Gerät der Spitzenklasse. Artikelbeschreibung: Endabschaltung: Ja Innenteller: KunststoffTellerlager: 7mm Grundmaße: Breite: 54cm, Tiefe: 45cm, Höhe 15cm Neues Gehäuse: Das Gehäuse besteht aus 25mm-MDF-Seitenteilen und einem 16 mm starken Boden gleichen Materials. Der Boden ist abschraubbar. Es ist sehr aufwendig mit mehreren Lagen Hochglanzlack bei entsprechenden Zwischenschliffen versiegelt und poliert. An der Rückseite befindet sich das Panel für alle benötigten Kabelverbindungen. New faceplate:Neue Deckplatte aus 1mm Aluminium. Oberfläche lackiert. Neuer Tonabnehmer Ortofon VinylMaster Alpha:Mit der VM-Serie hat Ortofon seit langem die Referenz MM-Tonabnehmer geschaffen, die lange Produktionszeit und der charakteristische Nadelkorpus sind auf der ganzen Welt ein Begriff. Das VM Alpha ist der Einstieg in die Serie und ist ein Super Einstiegssystem für Plattenspieler der mittleren Preislage.Die VM Reihe von Ortofon ist untereinander kompatibel. Sie können also mit einem VM Alpha starten und dann mit dem passenden Nadeleinschub die Qualität verbessern, indem Sie den nächsthörern Nadeleischub verwenden. Neues Audiokabel: Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Der Plattenteller: In fünf aufwendigen und zeitintensiven Arbeitsschritten, wird der Plattenteller auf Hochglanz poliert. Die Hochglanzpolitur verleit Ihrem Plattenspieler ein einzigartiges Aussehen. Mit Oberflächenversiegelung durch eine spezielle Schutzlackierung, gegen wiederholtes Anlaufen und für einen langanhaltenden Glanz. Neue Spikes aus verchromten Edelstahl: Damit der Plattenspieler von niederfrequenten Schwingungen entkoppelt wird, ist das Chassis mit höhenverstellbaren Spikes ausgestattet.Resonanzen und Rückkopplungen werden somit effektiv verhindert. Neuer Antriebsriemen:Dieser Antriebsriemen wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. Neues Schallplattengewicht aus Edelstahl: Mit einem Gewicht von 310g sorgt es dafür, dass die Schallplatte glatt auf dem Teller aufliegt und ruhig durchläuft. Dieses Schallplattengewicht spielt in der mittleren Gewichtsklasse. Es baut gerade soviel Gewicht auf, die Schwingungen der Platte zu dämpfen ohne die Lagerbuchsen zu beanspruchen. Die Federung des Thorens-Subchassis wurde entsprechend neu eingestellt. Durch seinen Einsatz erhöhen Sie die Klangleistung Ihrer Anlage. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion:The following parts are available as accessories and not included in this auction: Haube klein (zum Aufsetzen auf die Zarge): 150 € Haube groß (zum Aufsetzen auf den Unterbau): 160 € Cartridge MM including installation: Ortofon Vinyl Master Red (elliptisch): 190 €Ortofon Vinyl Master Blue (fine line): 290 €Ortofon Vinyl Master Silver (Fritz Gyger): 490 €

The phonograph works with 220V/50Hz. For shipping to the USA the turntable is converted on 110V/60Hz . Bei Selbstabholung 70,00 € Rabatt!RESTAURIERT von ART-AND-SOUND THORENS TD 160 mit SME Tonarm Series III Artikelbeschreibung:Endabschaltung: Nein Innenteller: MetallSpindel: 10 mm Grundmaße: Breite: 45cm, Tiefe: 36cm, Höhe ca.18cm Neues Gehäuse: Das Gehäuse besteht aus 25mm-MDF-Seitenteilen und einem 16 mm starken Boden gleichen Materials. Es ist aufwendig mit mehreren Lagen Hochglanzlack bei entsprechenden Zwischenschliffen versiegelt und poliert. Auf der Rückseite befindet sich das Anschlußpanel für alle benötigten Kabelverbindungen. Der Gehäuseboden ist mit drei Öffnungen für die horizontale Ausrichtung des Plattentellers ausgestattet. New faceplate:Neue Deckplatte aus 1mm Edelstahl gebürstet Neuer Tonabnehmer Ortofon Vinyl Master Alpha (inklusive):Mit der VM-Serie hat Ortofon seit langem die Referenz MM-Tonabnehmer geschaffen, die lange Produktionszeit und der charakteristische Nadelkorpus sind auf der ganzen Welt ein Begriff.Die VM Reihe von Ortofon ist untereinander kompatibel. Sie können also mit einem VM Alpha starten und dann mit dem passenden Nadeleinschub die Qualität verbessern, indem Sie den nächsthörern Nadeleischub verwenden. Neues Audiokabel: Markenkabel von Oelbach. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Der Plattenteller: In fünf aufwendigen und zeitintensiven Arbeitsschritten, wird der Plattenteller auf Hochglanz poliert. Die Hochglanzpolitur verleiht Ihrem Plattenspieler ein einzigartiges Aussehen.Mit Oberflächenversiegelung durch eine spezielle Schutzlackierung, gegen wiederholtes Anlaufen und für einen langanhaltenden Glanz. Plattenspielerfüße:Vier höhenverstellbare Spikes aus verchromten Edelstahl. Neuer Antriebsriemen:Dieser Antriebsriemen wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. Neues Schallplattengewicht aus Edelstahl:Mit einem Gewicht von 310g sorgt es dafür, dass die Schallplatte glatt auf dem Teller aufliegt und ruhig durchläuft. Dieses Schallplattengewicht spielt in der mittleren Gewichtsklasse. Es baut gerade soviel Gewicht auf, die Schwingungen der Platte zu dämpfen ohne die Lagerbuchsen zu beanspruchen. Die Federung des Thorens-Subchassis wurde entsprechend neu eingestellt. Durch seinen Einsatz erhöhen Sie die Klangleistung Ihrer Anlage. Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion:Haube klein (zum Aufsetzen auf die Zarge): eBay-Artikelnummer 112409195158Haube groß (zum Aufsetzen auf den Unterbau): eBay-Artikelnummer 112411582098 The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): german eBay-article number is 112409195158Hood large (to put on the base): german eBay-article number is 112411582098 Cartridge MM systems including installation: Ortofon MM Super OM 10 (elliptisch): UVP 100 € Ortofon MM Super OM 20 (elliptisch): UVP 220 € Ortofon MM Super OM 30 (fine line): UVP 310 € Ortofon MM Super OM 40 (Fritz Gyger): UVP 390 € Ortofon MM Vinyl Master Red (elliptisch): UVP 225 €Ortofon MM Vinyl Master Blue (fine line): UVP 315 €Ortofon MM Vinyl Master Silver (Fritz Gyger): UVP 395 €

SME Armrest+Arm Lift Handle für 3009/3012 frühe Version in gutem Zustand.

USED GENUINE SME 3009 3012 SERIES 2 IMPROVED ARM REST IN VERY GOOD CONDITION WILL GET WHAT IS ON THE PHOTO

SME 3009 Series II early arm rest. Good condition. Original SME part.

SME 3009 Series II Improved Tonearm Armrest. Arm Rest.

This is a SME 3009 series 2 Not improved arm with a very low 4 digit serial number 2393 This does not include the head shell. Everything else is there including new rubber plate mounts, I will pack this up perfectly and ship insured to the USA by UPS 2nd Day. International sales are through eBay global shipping. It does not get better than this for that meticulous turntable restoration. Its hard to know what to ask for something like this that is so very rare in this condition This tonearm was meticulously rebuilt and modified by SMETONEARMS.com years ago and not been installed since. This is a description of the SMETONEARMS processes that can also be found on their website - SME arm it is completely broken down to its most basic of components.- All parts are checked for acceptable tolerances.- All parts are put through a two stage acid bath and then sent through our sonic cleaners.- Unacceptable parts are discarded & replaced with New Old Stock SME British-made parts.- All external components are refinished to their brilliant original factory finish, shine & luster.- The two sets of pillar bearings are extracted and sonically cleaned.- We can also upgrade the pillar bearings to ABEC 9 Ceramic Roller Bearings from SKF in France for a nominal fee of $35.00 per bearing. Once this process is completed the re-wiring can begin - - We install a double continuous uninterrupted 1.25 meter run of one of the finest Cardas tonearm cables in the world. - The 4 X 33 Awg Cardas fully shielded Litz Wire - Highly shielded through a myriad of shielding processes to safeguard against outside RF interference. - Thanks to its Litz coating & Golden Section Stranding Conductors it is also one of the most musical tonearm wires in the world. - Once the arm has been wired it is then terminated at the end of the 1.25 meter run with Neutrik RCA connectors or Neutrik XLR connectors employing a superb strain relief system. - We have found these Neutrik connectors to be superior connectors due to the employment of this superb strain relief system.

SME 3009 Series II Improved arm rest. Good condition. Original SME part.

SME 3009 Series II early arm rest. Good condition. Original SME part.

Description of itemPayment methodSame as ebay payment method.shipping methodYour order will be dispatched to you from Japan within the designated handling time from the date of payment.Transaction mattersPacking state: We will carefully pack your items with the most appropriate protection materials to avoid your items from getting damaged during transport to you. Feedback:You will receive a positive feedback from our store as soon as you successfully complete your order and payment. We would very much appreciate if you could leave us one, too! We are a Japanese store specializing in Japanese high-quality products. Please let us hear from you with any inquiries you may have about our products. Happy shopping!To overseas buyers-Notes:Please be aware of customs fees - such as taxes and duties - when your order arrives. Since these fees vary from location to location, CUSTOMS FEES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING CHARGES. Please check with your local customs office for more information on the fees in your area. Refusal to pay these fees can result in an undeliverable order. Please note - we cannot undervalue orders, or mark them as a gift.

USED GENUINE SME 3009 3012 SERIES 2 IMPROVED ARM REST IN VERY GOOD CONDITION WILL GET WHAT IS ON THE PHOTO

This is a SME 3009 series 2 Not improved arm with a very low 4 digit serial number 2393 This does not include the head shell. Everything else is there including new rubber plate mounts, I will pack this up perfectly and ship insured to the USA by UPS 2nd Day. International sales are through eBay global shipping. It does not get better than this for that meticulous turntable restoration. Its hard to know what to ask for something like this that is so very rare in this condition This tonearm was meticulously rebuilt and modified by SMETONEARMS.com years ago and not been installed since. This is a description of the SMETONEARMS processes that can also be found on their website - SME arm it is completely broken down to its most basic of components.- All parts are checked for acceptable tolerances.- All parts are put through a two stage acid bath and then sent through our sonic cleaners.- Unacceptable parts are discarded & replaced with New Old Stock SME British-made parts.- All external components are refinished to their brilliant original factory finish, shine & luster.- The two sets of pillar bearings are extracted and sonically cleaned.- We can also upgrade the pillar bearings to ABEC 9 Ceramic Roller Bearings from SKF in France for a nominal fee of $35.00 per bearing. Once this process is completed the re-wiring can begin - - We install a double continuous uninterrupted 1.25 meter run of one of the finest Cardas tonearm cables in the world. - The 4 X 33 Awg Cardas fully shielded Litz Wire - Highly shielded through a myriad of shielding processes to safeguard against outside RF interference. - Thanks to its Litz coating & Golden Section Stranding Conductors it is also one of the most musical tonearm wires in the world. - Once the arm has been wired it is then terminated at the end of the 1.25 meter run with Neutrik RCA connectors or Neutrik XLR connectors employing a superb strain relief system. - We have found these Neutrik connectors to be superior connectors due to the employment of this superb strain relief system.

SME 3009 Series II Improved Tonearm Armrest. Arm Rest.

Description of itemPayment methodSame as ebay payment method.shipping methodYour order will be dispatched to you from Japan within the designated handling time from the date of payment.Transaction mattersPacking state: We will carefully pack your items with the most appropriate protection materials to avoid your items from getting damaged during transport to you. Feedback:You will receive a positive feedback from our store as soon as you successfully complete your order and payment. We would very much appreciate if you could leave us one, too! We are a Japanese store specializing in Japanese high-quality products. Please let us hear from you with any inquiries you may have about our products. Happy shopping!To overseas buyers-Notes:Please be aware of customs fees - such as taxes and duties - when your order arrives. Since these fees vary from location to location, CUSTOMS FEES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING CHARGES. Please check with your local customs office for more information on the fees in your area. Refusal to pay these fees can result in an undeliverable order. Please note - we cannot undervalue orders, or mark them as a gift.

This is an early (Two piece main weight) SME 3009 series 2 Not improved arm with a very low 4 digit serial number 2746 *The little plastic clip that holds down the arm is broken - it still sits flat on the stand but would fall if moved - I have ordered an NOS complete clip -and will include this This does not include the head shell. Everything else is there including new rubber plate mounts, I will pack this up perfectly and ship insured to the USA by UPS 2nd Day. International sales are through eBay global shipping. It does not get better than this for that meticulous 1960s turntable restoration. Its hard to know what to ask for something like this that is so very rare in this condition This tonearm was meticulously rebuilt and modified by SMETONEARMS.com years ago and not been installed since. This is a description of the SMETONEARMS processes that can also be found on their website - SME arm it is completely broken down to its most basic of components.- All parts are checked for acceptable tolerances.- All parts are put through a two stage acid bath and then sent through our sonic cleaners.- Unacceptable parts are discarded & replaced with New Old Stock SME British-made parts.- All external components are refinished to their brilliant original factory finish, shine & luster.- The two sets of pillar bearings are extracted and sonically cleaned.- We can also upgrade the pillar bearings to ABEC 9 Ceramic Roller Bearings from SKF in France for a nominal fee of $35.00 per bearing. Once this process is completed the re-wiring can begin - - We install a double continuous uninterrupted 1.25 meter run of one of the finest Cardas tonearm cables in the world. - The 4 X 33 Awg Cardas fully shielded Litz Wire - Highly shielded through a myriad of shielding processes to safeguard against outside RF interference. - Thanks to its Litz coating & Golden Section Stranding Conductors it is also one of the most musical tonearm wires in the world. - Once the arm has been wired it is then terminated at the end of the 1.25 meter run with Neutrik RCA connectors or Neutrik XLR connectors employing a superb strain relief system. - We have found these Neutrik connectors to be superior connectors due to the employment of this superb strain relief system.

This is an early (Two piece main weight) SME 3009 series 2 Not improved arm with a very low 4 digit serial number 2746 *The little plastic clip that holds down the arm is broken the piece is included - it still sits fin on the stand but would fall if moved - I have ordered an NOS complete clip -and will include this This does not include the head shell. Everything else is there including new rubber plate mounts, I will pack this up perfectly and ship insured to the USA by UPS 2nd Day. International sales are through eBay global shipping. It does not get better than this for that meticulous 1960s turntable restoration. Its hard to know what to ask for something like this that is so very rare in this condition This tonearm was meticulously rebuilt and modified by SMETONEARMS.com years ago and not been installed since. This is a description of the SMETONEARMS processes that can also be found on their website - SME arm it is completely broken down to its most basic of components.- All parts are checked for acceptable tolerances.- All parts are put through a two stage acid bath and then sent through our sonic cleaners.- Unacceptable parts are discarded & replaced with New Old Stock SME British-made parts.- All external components are refinished to their brilliant original factory finish, shine & luster.- The two sets of pillar bearings are extracted and sonically cleaned.- We can also upgrade the pillar bearings to ABEC 9 Ceramic Roller Bearings from SKF in France for a nominal fee of $35.00 per bearing. Once this process is completed the re-wiring can begin - - We install a double continuous uninterrupted 1.25 meter run of one of the finest Cardas tonearm cables in the world. - The 4 X 33 Awg Cardas fully shielded Litz Wire - Highly shielded through a myriad of shielding processes to safeguard against outside RF interference. - Thanks to its Litz coating & Golden Section Stranding Conductors it is also one of the most musical tonearm wires in the world. - Once the arm has been wired it is then terminated at the end of the 1.25 meter run with Neutrik RCA connectors or Neutrik XLR connectors employing a superb strain relief system. - We have found these Neutrik connectors to be superior connectors due to the employment of this superb strain relief system.

Garrard 301 Turntable - SME 3009 S2 improved arm and Shure V15 iii cart FULLY RESTORED. This is absolutely immaculate and is ready for another 60 years service. The turntable was originally built in April 1964. I will ship fully insured but I would prefer collection so you can satisfy yourself and buy with confidence. Although the details state shipping insurance is set at £500, I will pay extra to have it insured for the full purchase price. As plinths are very personal this is a basic design using a solid oak top and frame, biscuit used on all four mitres and 4 semi hemisphere sorbothane supports. Linn Sondek style feet. The 301 turntable was recently fully serviced by Ray Clarke at Classic Turntable Company Limited (April 2023) Ray is considered the best in his field and his work is highly regarded. https://www.classichifi-shop.co.uk The SME 3009 series 2 improved arm was completely restored by Audio Oregami (April 2023) http://www.audioorigami.co.uk/tone-arm-rewires/ The arm comes with a Shure V15 mkiii and has a brand new Jico VN35HE stylus installed with less than 1 hour of use for testing. Turntable service details: Strip and remove all parts Clean polish Chassis Shot Blast Chassis Powder Coat Chassis Acid remove Cadmium off linkage and replate with zinc pasivated gold Replace rubber grommets Strip Spindle Check wear and replace bushes Ultrasonic clean spindle re oil and rebuild Strip motor – Re place oil felts and re oil & assemble Replace Suppressor Replace any broken / cracked plastic components Check idler wheel bushes and replace if needed Re condition idler wheel or replace if worn Use new / replated screws for assembly Fit new motor springs Replace motor spring dampers Polish eddy brake disc Fit new Idler wheel springs Refit newly plated linkage / grease/ reset Replace motor clamp Adjust motor pulley size to get speed central on speed control Fit a new mains cable with soldered ends and insulate sleeves Re-cut platter strobe. Tone arm full restoration included full rewire plus external cable upgrade with the super ofc cable and modified gold neutrix phonos and sep. earth lead.

Genuine SME replacement part for the classic tonearm. postage discount given for multiple items.

DESCRIPTION: 100% original SME Factory Made 3009 or 3012 metal clasp arm rest *** Shipping: Any item sold with a value in excess of £10 will be shipped with a minimum of a signature requirement upon delivery. The actual cost of shipping is charged we do not profit in any way from shipping costs IMPORTANT INFORMATION PLEASE READ: Buyers with less than 10 positive feedbacks, 96% positive feedback or private feedback ratings should email me prior to committing to bid / buy Any item sold with a value of £40+ must be shipped with insurance Payment via Pay Pal must be received within 48 hrs of purchase Your item will be dispatched as soon as payment is received Via Pay pal in £GBP ****THANK YOU FOR VISITING SIGNIFICANTSOUND****

Up for sale is an SME FD200 box plus accessories suitable for the 3009 & 3012 series tonearms. Please note that the damper tank is NOT included nor available. This box and its contents are presented as recently found after decades of storage. The box is in near mint condition and truly exceptional for its age. Included inside is - - Assorted fixings - Right opening arm rest for 3009/ 3012 & R-series - Control lever for 3009 - Series II unimproved control lever - FD-2014 cartridge seating compound. This is not guaranteed to be useable due to it being a ?40 year old compound, but it is soft and malleable. Will be sent very well packed via Royal Mail 1st Class Recorded. UK sale only. Thank you for taking and interest in this item!