????Including & Condition Details: As shown in photos. MICRO BL-91 turntable/arm base A1206/rubber belt/transportation screws/original box, etc. ?ConditionEach part has been polished/cleaned. Depending on the level of scratches, the dust cover is polished with a special abrasive and the finish is polished to enhance transparency. Polish the platter and metal parts until they are as clean as possible to remove dirt and rust. Dust cover/Operation plate section/Platter/Rubber mat - There are some scratches/scratches on the cover, but there is no major damage and it is clean and transparent. -The rubber mat is soft and shows no signs of deterioration or warping. ?The platter/arm base/operation plate part is also in very good condition. Cabinet - There are some circular marks on the platter installation surface, but overall there is no major damage and the cabinet is glossy and in very good condition. ?Hinges also remain open without damage. - The rubber inside the insulator has some wear, but it is elastic and is currently functioning without any problems. It is in absolutely beautiful condition. Considering its age, we consider it to be in very good condition. ?We perform aging for half a day to one day to confirm the operation. For this listing, we have carried out a comprehensive maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence. TurntableWorks well, rotates normally, and can switch between 33 and 45 rotations/adjust speed. The stable rotation has also been confirmed using a stroboscope. ?The pulley operates normally using the ON/OFF knob. - There is no problem with the light turning on. *This item is common for 50/60Hz. There are no problems with all of the above operations, and the product is in very good working order. ?Product contents Manufacturer: MICRO Model number: BL-91 Dimensions: Width 532 x Height 175 x Depth 440mm ?Accessories ?Dust cover ?rubber mat ?rubber belt ?platter ?arm base (for MICRO A1206 SME short arm) ?instruction manual ( Copy) ?Stroboscope (MICRO) ?Original box x 2 ?Transportation screws x 3 ?When shipped, the transportation screws will be attached. Please remove the 3 red screws under the operation panel before use. ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Universum F 2091 Direktangetriebener Halbautomat baugleich OEM Micro Seiki DD 23 Wurde alles getestet und funktioniert.

????Including & Condition Details: As shown in photos. MICRO RT-2000VA suction type turntable compatible with BL-91/1500 series ?Condition There are two scratches near the center of the top. There are other minor dullness and scratches, but no major damage is found and the item is in a shiny state. There is no wear or damage to the suction rubber either on the inner or outer circumference. ?OperationWe have confirmed that records are properly adsorbed using the operational adsorption spindle/pump unit. ?Product contentsManufacturer: MICROModel number: RT-2000VASize: Diameter approx. 309mm x Height 46mmWeight: approx. 3.15kg ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

About: Looking for the best audio quality a turntable can offer? Then check out this MICRO SEIKI BL-91 / BL91L Belt Drive Record Player System Turntable. Boasting a brown color, a belt drive system and 45RPM and 33.3RPM speed settings, you will be thrilled at the audio quality. Weighing 16kg, this unit is built to last and provide accurate and high-quality audio for years to come. Please note: I am selling this item as is, and will be happy to answer your questions. Condition: Cartridge not included. This item powers on as you can see in the photos. There are one or two scratches on the cover, but there is no major damage and it is clean and transparent as shown in the photo. The rubber mat is soft and shows no signs of deterioration or warping. The platter/arm base/operation plate part is also in very good condition. Cabinet Hinges also remain open without damage. Considering its age, we consider it to be in very good condition. The Turntable Works well, rotates normally, and can switch between 33 and 45 rotations/adjust speed. The pulley operates normally using the ON/OFF knob. There is no problem with the light turning on. I am selling the record collection and audio equipment from the private residence of a lifelong record enthusiast. Now in his later years, he has decided at last to sell his collection. He took care and joy in maintaining his record collection and always used hi-quality equipment. You get the exact item in the photos. I personally handled it as little as possible. Please check my feedback for reliability. Will ship safely (as always). *This item does include shipping insurance.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

MICRO SEIKI BL-91 DescriptionThe BL-91 uses an external belt drive system.In addition to the stock aluminum die-cast platter, the RT-2000G 8kg gunmetal platter of the MICRO RX-2000 can be replaced.The MICRO A-1200 series arm base is interchangeable.By replacing the base, many tone arms can be set.The RX-2000 looks heavy, and you can change the arm to your liking, so it can be used in a wide range of applications.Manufacturer?MICROModel Number?BL-91Dimensions: 532mm (W) x 175mm (H) x 440mm (D)A-1201 base compatible tone arm: MICRO MA-505, 505S, 505X, MA-707X, AUDIO CRAFT AC-300MKII, SAEC WE-407/23 Operation checkWe have aged the product for half a day to one day to check the operation.We have performed total maintenance and operation checks for this exhibit.We have measured electronic parts, lubricated spindle oil, cleaned each contact point, and adjusted each part.It is in good condition for safe use.The turntable rotates normally and can be switched between 33 and 45 rpm and the speed can be adjusted.The rotation stability has been confirmed with a stroboscope.The pulley operates normally with the ON/OFF knob.No problem with light illumination.If you find any defects after arrival, please feel free to contact us for a free return. Please contact us for a free return policy (limited to 30 days after delivery). AccessoryDust coverRubber matRubber beltPlatterArm base (MICRO A1201, hole diameter: approx. 28mm)Instruction manual (copy)Transport screw x 3 PackagingWhen exporting overseas, we will ship the product in reinforced cardboard boxes to prevent damage during transportation. If the product comes with its original box, we will ship it with the original box protected. PrecautionsWhen using the product, please check the voltage supported by the product and the voltage in your area carefully. If the voltage is different from the product specifications, not only will the product not function properly, it may also damage the equipment. About Handling TimeShips within 5 business day.Please note that Saturdays, Sundays, and holidays do not count as business days. About Shipping PolicyWe ship via FedEx, DHL or Japan Post. International Buyers - Please Note:Duties, taxes, and fees are not included in the product price or shipping cost. You are responsible for paying any duties, taxes, or fees that may be incurred when importing products into your country. We also recommend that you check with your customs office in advance of your purchase to determine how much these additional costs will be.

Item DescriptionThe condition is good.The operating status was checked. Please let me know if it doesnt work when it arrives. I will be responsible if the product does not work.ShippingHandling time: Approximately 5-10 business days.Shipping method: Expedited shipping (FedEx /DHL /EMS): It will arrive approximately 4 days after shipment (to US), depending on the location. You can know the delivery status in detail.The method available depends on the status of the airmail.Shipping is only available at addresses registered with eBay. Please note that addresses that are not registered with eBay cannot be shipped. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

MHC39-TF600, 890-PMO-3911 Power Supply Board From Seiki SE39UY04-1 LCD TVPlease Order ONLY By Part Number , NOT Just TV Model Mumber All Boards are tested and working prior to stocking them.We DO NOT accept any returns , because we have no way of knowing your expertice in TV troubleshooting.

MICRO BL-91 DescriptionBL-91 with external belt drive systemIn addition to the stock aluminum die-cast platter, the RT-2000G 8kg gunmetal platter of the MICRO RX-2000 can be replaced.The MICRO A-1200 series arm base is interchangeable, and by changing the base, many tone arms can be set. You can enjoy a wide range of tone arms by replacing the base with your own.A-1201 base compatible tone arm: MICRO MA-505, 505S, 505X, MA-707X, AUDIO CRAFT AC-300MKII, SAEC WE-407/23Operation checkWe have checked the operation of the turntable and it is in good condition for safe use.The 33/45 rotation switch and pitch adjustment are also in effect, and the rotation is stable and normal.The start and stop buttons respond without any problems.Normal output from left and right channels.The lifter descends smoothly.In the unlikely event of an initial malfunction, please be assured that you can return the product free of charge within 30 days of arrival. AccessoryDust coverRubber matRubber beltPlatterArm base (MICRO A1201, hole diameter: approx. 28mm)Instruction manual (copy)Transport screw x 3PackagingWhen exporting overseas, we will ship the product in reinforced cardboard boxes to prevent damage during transportation. If the product comes with its original box, we will ship it with the original box protected. PrecautionsWhen using the product, please check the voltage supported by the product and the voltage in your area carefully. If the voltage is different from the product specifications, not only will the product not function properly, it may also damage the equipment. About Handling TimeShips within 5 business day.Please note that Saturdays, Sundays, and holidays do not count as business days.About Shipping PolicyWe ship via FedEx, DHL or Japan Post. International Buyers - Please Note:Duties, taxes, and fees are not included in the product price or shipping cost. You are responsible for paying any duties, taxes, or fees that may be incurred when importing products into your country. We also recommend that you check with your customs office in advance of your purchase to determine how much these additional costs will be.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

Description ?Total Condition Rank : Excellent *Please check the rank table below ? Include : Please confirm the accessories with photos. All the accessories appearing in the photos are attached. *If you want to know more details of condition, please feel free to contact me.I can send more photos if you want. ConditionRankDetails99%Like NewA new, unused item with absolutely no sign of wear, but pre-owned. 97-98%Top MintAlmost no signs of use.95-96%MintMinimal sings of use.93-94%Near MintSome scratches and dirt.91-92%ExcellentMany scratches and dirt. No problem for use.86-90%GoodMany big scratches and dirt. No problem for use.80-85%For PartsAs-is. It does not work normally. Use for parts. Payment We accept PayPal payment only. Please make payment after we sent an invoice. Please pay within 3 days of winning the auction. **Please read our Return Policy before a successful bid. Please purchase our item only if you accept our Return Policy. If you have any questions, please email me before purchase. Shipping Sipping is Standard Shipping. I ship the item to your Paypal registered address via standard shipping with tracking number. Item(s) will be shipped in 10 business day after your purchase. I confirmed a receipt of your payment.(excluding weekends & Japanese holidays) Depending on the country, I will charge tariffs on buyers before shipping. I will charge tariffs with Paypal. If you wish combined shipping with other items, please let us know. We will calculate the total shipping cost and will inform you. About Us Thank you for visiting my store.My store is in Hokkaido, Japan. All accessories are included in the description that we have posted in list. Please refer to the description carefully. Cause the time difference we might not be able to response your question in real time, but we will reply your questions as soon as possible. We look forward to having a dealing with you! International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. Please check with Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse for additional shipping charges. Please use English, Japanese when you contact us about a complaint of the item.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

Outer Ring stabilizer made from gunmetal for Micro seiki RX-5500, RX-1500, BL series.Please consider Its functionality and operation has not been tested.Please bid only if you are aware this. We will ship via Fedex, DHL or Standard Registered Post.On Mar-18-24 at 05:09:49 PDT, seller added the following information: Outer size : 360mm. Inner diameter up side: 306mm. Inner diameter down side: 310mm. Thick: 15mm. Weight :  2,5 kg

MICRO BL-91 DescriptionOperation checkWe have checked the operation of the turntable and it is in good condition for safe use.The 33/45 rotation switch and pitch adjustment are also in effect, and the rotation is stable and normal.The start and stop buttons respond without any problems.Normal output from left and right channels.The lifter descends smoothly.In the unlikely event of an initial malfunction, please be assured that you can return the product free of charge within 30 days of arrival. AccessoryDust Cover Rubber mat Tonearm - SAEC WE-308Headshell - SAECCartridge - SHURE VN35MRPackagingWhen exporting overseas, we will ship the product in reinforced cardboard boxes to prevent damage during transportation. If the product comes with its original box, we will ship it with the original box protected. PrecautionsWhen using the product, please check the voltage supported by the product and the voltage in your area carefully. If the voltage is different from the product specifications, not only will the product not function properly, it may also damage the equipment. Please note that needles (stylus) are consumable items and are not eligible for return or compensation even if damaged or defective upon arrival. Please check the product images for the condition of the stylus. About Handling TimeShips within 5 business day.Please note that Saturdays, Sundays, and holidays do not count as business days.About Shipping PolicyWe ship via FedEx, DHL or Japan Post. International Buyers - Please Note:Duties, taxes, and fees are not included in the product price or shipping cost. You are responsible for paying any duties, taxes, or fees that may be incurred when importing products into your country. We also recommend that you check with your customs office in advance of your purchase to determine how much these additional costs will be.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

ShopJimmy | TV & Appliance Repair Made Easy If youre looking to repair a TV or appliance, youve come to the right place. We are the industry leader in replacement TV and appliance parts, and we cant wait to help you on your repair journey. Its easier than you think! If youre repairing your TV, after diagnosing its symptoms, the first step is finding the correct TV part. We highly suggest searching by the part number located on your TV part. If you need help locating this number, please reach out to us through eBay. Were happy to help! Seiki 910-320-1024 LED Backlight Strips (3) SE32HYT Seiki 910-320-1024 LED Backlight Strips (3) SE32HYT Part Number: 910-320-1024 Board Number: MS-L0470 V4 / 910-320-1024 Part Type: LED Light Strip Known ModelsBrandModelsVersionsSeikiSE32HYT Were TV Part Smart You could say were mildly obsessed with TV parts. We demand quality. We seek compatibilities. We want to make TV repair easier. And we acquire TV parts from a variety of sources and channels, which allow us to offer the most comprehensive inventory in the industry. Harvesting: We recover all of the working parts from new TVs damaged during manufacturer-to-retailer shipping (2,000+ per week), breaking down every TV in-house and inspecting every part three times. Sourcing: We also source TV parts, lamps, and components directly from manufacturers to meet the fluctuating repair demands for certain TV models. Partnerships: We developed innovative partnerships to both expand our inventory offerings and manufacturer our very own products. A Mission To Make You Happy Our goal is to make you -- the customer -- completely happy. This mission impacts every aspect of our business, especially our customer service. We have over a dozen Customer Service Reps who know their TV parts, actually enjoy small talk, and want to ensure that you have the best possible experience with us. So, please reach out to us through eBay with any questions related to finding part numbers, TV model compatibilities, the weather... whatever you want! However, please note that were not providing technical support at this time. Lets fix your TV together! About ShopJimmy Jimmy Vosika, founder and Director of Partology, started buying and selling reclaimed TVs on eBay in 2007. Hes a pretty smart guy (dont tell him we actually admitted that) and soon discovered that harvesting the undamaged TV parts within reclaimed TVs is a better business model and more eco-friendly. ShopJimmy was born. Five buildings, 14 years, and hundreds of thousands of TV and appliance parts later, we now offer TV parts and lamps, TV stands, component kits, board repair services, tech tools, appliance parts, vacuum parts, and electronics accessories to thousands of customers across the globe!

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

ALL PARTS COME FROM WORKING NEW OR USED BROKEN SCREEN TVSNOTE;CHECK DIAGNOSTIC TIPS BEFORE ORDERINGPlease be sure that the BOARD Part Number AND SERIAL NUMBER are EXACT to the one you are ordering, some models have different boards. Do not match by TV Model. There are possibly several different boards for each model TV. All items are tested and guaranteed to work.?The majority of our parts are reclaimed FROM WORKING BROKEN SCREEN TVS. We do not have NEW PARTS. We reclaimed them from working damaged TVs. From reclaiming to shipping, all of our parts go through a rigorous inspection. Diagnostic tips: 1.Symptom: TV has sound, but no picture or looks like it is coming on(from the light(s) on the front panel), but the screen is dark or there is no picture. Tip: Try shining a light on the front of the TV after you turn it on. Do you see a faint picture? If not, it may just need a circuit board replacement. If you do see a picture, then the back lights is most likely that powers the back lights is at fault. Symptom:TV is dead. There are no lights that come on anywhere when you plug the TV in to a power outlet and press the power button. Tip: This can be caused by a blown fuse from a surge or lightning, but most often it is caused by a defective main board Symptom:The HDMI ports are not functioning or not functioning properly. Tip:Most often, the problem is with the main board. Most main boards contain all of the HDMI ports, so replacing it will fix the problem98 percent of the time. HDMI ports are often damaged by lightning. The top tech reports that about half the jobs he assesses that have lightning damage involve main board replacement because HDMI ports are non-functional even though the rest of the TV operates normally. Symptom:The TV appears to be in an endless cycle of coming on and going off by itself showing the logo only. Sometimes the cycle ends with the TV staying on or going off. This is normally a main board problem

Description ?Total Condition Rank : Excellent *Please check the rank table below ? Include : Please confirm the accessories with photos. All the accessories appearing in the photos are attached. *If you want to know more details of condition, please feel free to contact me.I can send more photos if you want. ConditionRankDetails99%Like NewA new, unused item with absolutely no sign of wear, but pre-owned. 97-98%Top MintAlmost no signs of use.95-96%MintMinimal sings of use.93-94%Near MintSome scratches and dirt.91-92%ExcellentMany scratches and dirt. No problem for use.86-90%GoodMany big scratches and dirt. No problem for use.80-85%For PartsAs-is. It does not work normally. Use for parts. Payment We accept PayPal payment only. Please make payment after we sent an invoice. Please pay within 3 days of winning the auction. **Please read our Return Policy before a successful bid. Please purchase our item only if you accept our Return Policy. If you have any questions, please email me before purchase. Shipping Sipping is Standard Shipping. I ship the item to your Paypal registered address via standard shipping with tracking number. Item(s) will be shipped in 10 business day after your purchase. I confirmed a receipt of your payment.(excluding weekends & Japanese holidays) Depending on the country, I will charge tariffs on buyers before shipping. I will charge tariffs with Paypal. If you wish combined shipping with other items, please let us know. We will calculate the total shipping cost and will inform you. About Us Thank you for visiting my store.My store is in Hokkaido, Japan. All accessories are included in the description that we have posted in list. Please refer to the description carefully. Cause the time difference we might not be able to response your question in real time, but we will reply your questions as soon as possible. We look forward to having a dealing with you! International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. Please check with Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse for additional shipping charges. Please use English, Japanese when you contact us about a complaint of the item.