Sansui Ra-700 Reverberation Amplifier. Amplifier is in good condition the wood casing is in great condition, tiny dent In left hand back corner almost imperceptible. The plastic face plate has A line fracture that you will not percibe Even when you look closely. Lights and controls seem to be working As well.

Sansui RA-700 Reverberation Amplifiergeprüfte Ware vom Händler mit einem Jahr Gewährleistunges ist alles voll funktionstüchtig - es gibt keinen technischen Mangelaugenscheinlich gut erhalten - gepflegter Zustanddie bereitgestellten Fotos zeigen den angebotenen Artikelaußerdem zeigen sie die Bestandteile der Lieferungweitere Artikel finden Sie in meinem Shop

Nice Condition Vintage SANSUI RA-500 Reverberation Amplifier Tested Works Great!. I purchased at an estate sale. I put in 3 new fuse lights that were not working. Now the lights come on in the front and looks great. This item is in very good condition. May have a light scratch but I really can’t see them. Just in case there may be a couple I can’t see. On the top front are a couple small dents. I am pointing to them in the picture. Other than these small dents, I don’t see any other issue. See pictures

SANSUI RA-500 Reverberation Amplifier Tested Works,National shipping only,

Works as it should Colors don’t seem as bright Has a small chip in the front but other wise in great condition Sold as is

Unearthed from deep within my basement. It had probably been there for 20+ years. Cool little gizmo with pretty lights for your vintage audio battle station.

Sansui RA-500 Reverberation Amplifier. Specifications Rated output voltage: 300mV Maximum input voltage: 3V Harmonic distortion: less than 0.2% Frequency response: 20 to 30,000Hz Signal to noise ratio: 65dB Reverberation time: 1.9 to 3.2 sec Semiconductors: 11 x transistors, 3 x diodes Very cool and sought after unit, beautiful wood case in great condition, face plate is in great condition. Unit powers on but the display does not operate. Unit is sold as is with no returns accepted.

Vintage SANSUI RA-500 Reverberation Amplifier - Tested - Nice Condition Powers On and Display Works,. Sold as-is Please look at all photos for more detailed look anything not mentioned here. • By bidding on this item it is agreed upon that you have read this entire post, have viewed all/any supplemental pictures/videos, and have exhausted any questions about this item you may have in regards to this item. •There are two ways to describe an item. One way is via text, the other way is via photographs. Use both to familiarize yourself w/ this product before purchasing. •If its not in the pictures, its not included. •All item sold as is, as shown, untested, without any expressed or implied warranty or guarantee unless otherwise noted. No returns. Item is sold as-is. Please see listing photos for more details. •Orders can take up to 10 BUSINESS DAYS to be shipped. IF YOU PAID FOR IT WE WILL SHIP IT ASAP, WE WILL NOT CANCEL.

SANSUI REVERBERATION AMPLIFIER RA-500. It looks in good shape, turns on and lights up. Have no other way of testing anything further. As Pictures.

Sansui RA-500 Reverberation Amplifier. Specifications Rated output voltage: 300mV Maximum input voltage: 3V Harmonic distortion: less than 0.2% Frequency response: 20 to 30,000Hz Signal to noise ratio: 65dB Reverberation time: 1.9 to 3.2 sec Semiconductors: 11 x transistors, 3 x diodes Very cool and sought after unit, beautiful wood case in great condition, face plate is in great condition. Unit powers on but the display does not operate. Unit is sold as is with no returns accepted.

Sansui RA-500 Reverberation Reverb Amplifier With Original Box. This is in excellent condition with the original box and packaging.

SANSUI Reverberation Amplifier RA-500 Vintage. Plugged in and displays all work, but untested for audio hook ups.

SANSUI REVERBERATION AMPLIFIER RA-500. Unit is in working order. Ships FEDEX, CONUS only. Worldwide shipping via ebay international shipping program.

The device is in very good condition with no scrapes or scratches. It powers up and the lights work. I had a professional test it and he said it works. He hooked it up to a stereo system. He thought the reverberation would have been a little louder, but he could definitely tell it was functioning. He did tap the top-front of the device and that seemed to make the reverb a little louder. Any further exploration by the pro would have incurred a fee. And actually we were both short on time and it looks like it would take some doing to get inside of it. Please feel free to ask questions or request more photos. Im not a mechanical wizard but Ill do my best to check out specific functions.

Sansui RA-500 Reverberation Amplifier. Specifications Rated output voltage: 300mV Maximum input voltage: 3V Harmonic distortion: less than 0.2% Frequency response: 20 to 30,000Hz Signal to noise ratio: 65dB Reverberation time: 1.9 to 3.2 sec Semiconductors: 11 x transistors, 3 x diodes Very cool and sought after unit, beautiful wood case in great condition, face plate is in great condition. Unit powers on but the display does not operate. Unit is sold as is with no returns accepted.

You are bidding on a Sansui vintage reverberation unit that lights up with a color visual but is untested and being sold as is. There is a visible scratch to the plastic on the front.

Vintage SANSUI RA-500 Reverberation Amplifier WORKING 8.5/10 Stereo HI-FI Reverb.comrs on original box but part of top is missing.

Sansui RA-500 Reverberation Amplifier. Specifications Rated output voltage: 300mV Maximum input voltage: 3V Harmonic distortion: less than 0.2% Frequency response: 20 to 30,000Hz Signal to noise ratio: 65dB Reverberation time: 1.9 to 3.2 sec Semiconductors: 11 x transistors, 3 x diodes Very cool and sought after unit, beautiful wood case in great condition, face plate is in great condition. Unit powers on but the display does not operate. Unit is sold as is with no returns accepted.

VINTAGE SANSUI REVERBERATION AMPLIFIERMADE IN JAPAN MODEL: RA-700 GREAT WORKING PRE-OWNED CONDITION, SMOKE FREE HOME In hand, always CAREFULLY PACKAGED and ready to ship! FAST 1 business day handling and FREE 30-days U.S. returns! eBay International Shipping available. Feel free to ask me any questions. **Please explore our store, new listings added daily.**

Sansui RA-500 Reverberation Amplifier Looks Great And Sounds Excellent Owned From New And Very Well Looked After All Functions Work Well Visual Display Unit Looks Excellent Case And Controls In Great Shape Will Come With The Original User Manuals Being A Used Item There Will Be Some Minor Signs Of Usage Please Look at The Photos Carefully For Condition The Amplifier Will Be Very Well Packed And You Will Receive It Exactly As Seen In The Photos Overall An Excellent Vintage Amplifier From Sansui Which Looks And Sounds Superb International Buyers Please Contact Us For An Accurate Shipping Quote

Sansui RA-500 Reverb For sale is a vintage Sansui Spring Reverb unit. It powers up (with amazing graphics on the screen) and passes audio signal. It is sold as-is, no functional warranties or guarantees, no refunds or returns.

Vintage SANSUI RA-500 Reverberation Amplifier W/ Manual - Powers On, Not tested.

Sansui RA-500 Reverberation Amplifier. Specifications Rated output voltage: 300mV Maximum input voltage: 3V Harmonic distortion: less than 0.2% Frequency response: 20 to 30,000Hz Signal to noise ratio: 65dB Reverberation time: 1.9 to 3.2 sec Semiconductors: 11 x transistors, 3 x diodes Very cool and sought after unit, beautiful wood case in great condition, face plate is in great condition. Unit powers on but the display does not operate. Unit is sold as is with no returns accepted.

Nice Condition Vintage SANSUI RA-500 Reverberation Amplifier Tested Works Great!.