Sansui 19 Inch HD Lcd Tv HDLCD19WB PC Monitor Television No Remote. Condition is Used. Shipped with USPS Ground Advantage.

Please Note shipping from Japan. Policy Payment Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Cancellations & Returns Cancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back. International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

This is the Sansui AU-D607F, it has been confirmed power on no other testing has been done this auction starts off with the price that I believe will cover all shipping in the United States, no matter where it is, with a couple bucks added on and goes from there. Amplifier will be packed well. The MM/M input of the AU-D607F is switched by the gain and input impedance switch of the equalizer, so that even when the MC cartridge is used, the configuration is ICL and OCL. In addition, MM/MC can be switched with the switch on the front panel, and the current position is indicated by the lighting of the indicator. The power supply section is a two independent power supply system with a 32,800 ? F custom capacitor. It is equipped with a simple tone control circuit composed of CR. Because it is a simple system without an equalizer or power amplifier, it is designed so that the tone control does not work at the volume position of -6dB to 0 db (at full power). Therefore, the saturation does not exceed the amplification of the amplifier at full power unlike the conventional system. Equipped with a subsonic filter, 2-circuit tape monitor, recording selector / copy function, audio muting, balance control, input selector with encoder, etc. There were 2 kinds, black model with Rosewood style bonnet and silver model with white oak style bonnet. TypeIntegrated amplifier Power Amplifier Unit Effective power75W + 75W (8 ohm, 10 hz to 20 khz, THD 0.005%) 75W + 75W (8 ohm, 1 kz, 0.003% THD) Total harmonic distortion factor (10 Hz to 20 kHz at effective output)Not more than 0.005% Intermodulation Distortion Factor (60 Hz : 7 kHz = 4 : 1, SMPTE)Not more than 0.008% Output Bandwidth (IHF, both channel operation, THD 0.02%)5 Hz to 70 kHz Damping factor (new IHF, 20 Hz to 20 kHz)100 (8 ?) Frequency Response (1W)DC ~ 300 khz + 0 -3dB Signal-to-noise ratio (A network)110 dB or more Envelope distortionBelow the measurement limit TIM Strain (Sawtooth method)Below the measurement limit Slew rate± 180 v / ? sec (8 ?) Inside slew rate± 300 v / ? sec (8 ?) Rise time0.8 ? sec Preamplifier Section Input Sensitivity / Input Impedance (1 kHz) Phono1, 2 mm : 2.5mV/47k ? Phono1 MC : 250 ? V/100 ? Tuner, AUX, Tape Play1, 2 : 250mV/27k ? Phono maximum allowable input (1 kHz, THD 0.01%)MM:200mV MC:20mV Output Level / Impedance (1 kHz)Tape Rec : 250 mv (47k ?) / 600 ? Total harmonic distortion factorPhono1, 2 mm : 0.005% or less (20 Hz to 20 kHz, 5 V) RIAA Deviation (MM)20 Hz to 20 kHz ± 0.2 dB Signal-to-noise ratio (A network)Phono1, 2 mm : 88 dB or more Phono1 MC : 70 dB or more Phono input equivalent noise (A network, short circuit) Phono1, 2 mm : -140dBV Phono1 MC:-142dBV Channel separationPhono1, 2 mm : 60 dB or more Phono1 MC : 50 dB or more Tuner, AUX, Tape Play : 80 dB or higher Tone controlBass : + 6 to -8dB at 50 Hz Treble : ± 6 dB at 10 kHz FilterLow : 16 Hz (-3dB, 6dB/oct.) Audio Muting-20dB Rated power consumption (Electrical Appliance and Material Control Law)200W External dimensionsWidth 445x Height 163x Depth 403 mm Weight12.4kg

[Condition Description] Working perfectly. This works with AC100V and A type plug. For countries with 220-250V (Australia,Europe, UK ...)and 110-120V (US and Canada),a transformer will be required with plug in your spec. Payment We accept payment through only ebay managed payments system.Shipping We offer Expedited shipping for all orders! Your order will be dispatched within 7 working day of receiving payment and you should expect to receive it four to seven days after dispatch. Returns We accept returns for any reason up to specified date after receipt. This includes reasons such as just didnt like it in order to ensure customer satisfaction. READ International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. About us Thanks for your interest in our ebay store! We have been running business since 2016. While we may only run a small business, we do strive to always be the best we can be!

Sansui AU-D607, just serviced. Japanese Domestic Item, 100v. Comes with stepdown transformer. In full working order. This is a DC pre-main amplifier equipped with a diamond differential circuit that identifies the essence of audio amplifier as music playback. The design further improves the DC conversion of the amplifier section. The equalizer section, flat amplifier section, and power amplifier section are all composed of DC amplifiers with excellent dynamic characteristics. In addition, all block stage inputs are all FET inputs and are used as a push-pull input circuit, and the input capacitors of all block stages are eliminated in the direct coupling system. This eliminates the low-frequency phase rotation that occurs when a capacitor enters the signal path, and other factors that degrade sound quality. As a result, pure music signal transmission and a wide range are achieved. A diamond differential circuit is mounted on the power amplifier. The first stage adopts a differential circuit with constant current using dual FET capable of passing a large current with low noise characteristics, and the second stage adopts a diamond differential circuit with cascode bootstrap. And, NM (Non Magnetic) transistor with good linearity is used for the power stage, and the whole circuit is composed of symmetrical symmetrical circuit and 2 pole phase correction circuit, which realizes waveform transmission with little distortion up to high frequency range. The circuit configuration of the equalizer amplifier section is a direct-coupled system in which input capacitors that cause sound quality degradation are removed. A high-stability, low-noise, high-gm dual FET is used for the first stage, a push-pull drive with two differential stages and a current differential with a current mirror is used, and a pure SEPP output is provided. The equalizer for the NF circuit uses a high-precision metal film resistor and a styrofoam capacitor with low capacitance error and excellent temperature characteristics. The flat amplifier section also uses a direct coupling method without input capacitors that are not effective in sound quality. The first stage consists of cascode connection and differential amplification with current source using dual FET of low-noise and high-gm, and the second stage consists of 8 devices using current differential push-pull circuit with current mirror. Like the DC power amplifier section, it has excellent open-loop characteristics to reduce TIM distortion. When the tone is turned on, the flat amplifier is switched to an NF-type tone amplifier, which provides a simple tone control characteristic with less distortion. The power supply section is a 2-power transformer, and the left and right sides are completely independent. In addition, by using 12,000 ? Fx4 electrolytic capacitors and metalized film capacitors, low impedance characteristics from ultra-low band to ultra-high band are achieved. Equipped with MC head amplifier. Equipped with a loudness switch, subsonic filter, Tone defeat switch and balance control. Tape play function and tape copy function can be performed independently, and the tuner signal can be extracted independently for recording. For example, you can air check while listening to a record. The speaker output can be connected in two ways : OFF, A, B, or A + B. Three spare AC outlets (100W for one interlocked circuit, 250W for two non-interlocked circuits) and ground terminal are mounted. Pre-power and power can be separated. TypeWide-range DC pre-main amplifier Power Amplifier Unit Effective power70W + 70W (10 Hz ~ 20 kHz, THD 0.008%, 8 ?) 70W + 70W (1 kHz, THD 0.003%, 8 ?) Total harmonic distortion factor0.008% or Less (10 Hz to 20 kHz, 8 ? at Effective Output) Intermodulation distortion factor (70 hz : 7 khz = 4 : 1)Not more than 0.008% Output bandwidth5 Hz ~ 70 kHz (IHF, Both Channel Operation, 1 kHz, 8 ?) Damping factor100 (IHF, Double-channel Operation, 1 kHz, 8 ?) Frequency characteristicDC ~ 400 kHz, + 0 -3dB Input Sensitivity / Input Impedance1V/47k ? (1 kHz) Signal-to-noise ratio125 dB or more (IHF, A-network, short circuit) Channel separation90 dB or More (IHF, 1 kHz) Rise time0.5 ? sec Slew rate± 160 V / ? sec Preamplifier Section Input Sensitivity / Input Impedance (1kHz)Phono-1MM : 2.5mV/47k ? Phono-2MC Only : 0.1mV/100 ? AUX, Tuner, Tape Play 1, 2 (PIN) : 150mV/47k ? MC compatible impedance100 ? or less Phono maximum allowable input (1 kHz)Phono MM:300mV(THD 0.01%) Phono MC:15mV(THD 0.03%) Output Voltage (1 kHz)Tape Rec1, 2 (at PIN, 47k ?) : 150 mv Pre Out (at 47k ?) : 1 V Max Pre Out (at THD 0.05%, 47k ?) : 4 v Output Impedance (1 kHz)Tape Rec1, 2 : 600 ? or less Total harmonic distortion factorPhono MC (1 kHz, 6 V) : 0.01% or less Phono MM (20 Hz to 20 kHz, 6 V) : 0.005% or less AUX, Tuner, Tape Play 1, 2 (20 Hz to 20 kHz, 1 V) : 0.005% or less Intermodulation distortion factor (70 hz : 7 khz = 4 : 1)AUX, Tuner, Tape Play 1, 2 (1 v) : not more than 0.005% Frequency characteristicRIAA deviation (Phono 1, 2, 20 Hz-20 kHz) + / - 0.2 dB AUX, Tuner, Tape Play 1, 2 : 5 hz to 100 khz, + 0 -1dB Signal-to-noise ratio (IHF, A-network Short circuit)Phono MC (input conversion) : -152dBV Phono MM : 88 dB or more AUX, Tuner, Tape Play 1, 2 : 100 dB or more Channel separation (IHF, 1 kHz)Phono MC : 70 dB or more Phono MM : 70 dB or more AUX, Tuner, Tape Play 1, 2 : 75 dB or higher Input-to-input separation (input short, 1 kHz)Tuner ? Phono MM : 90 dB or higher Tape Play 1, 2 ? Phono MM : 90 dB or more Tuner ? Tape Play 1, 2 : 90 dB or higher Tape Play 1 ? Tape Play 2 : 90 dB or higher Tone controlBass : ± 10 dB (50 Hz) Treble : ± 10 dB (15 kHz) Subsonic filter16 Hz (-3dB, 6dB/oct.) Loudness (at volume -30dB)+10dB(50Hz) +4dB(10kHz) Headphone jack output85 mw (8 ?) Load impedance4 ~ 16 ? Rated power consumption195W (Electrical Appliance and Material Control Law) External dimensionsWidth 430x Height 168x Depth 390 mm With Rack-Mount Adapter : Width 482x Depth 418 mm Weight15.5kg With rack-mount adapter : 16 kg Sold SeparatelyRack-Mount Adapter BX-7 (1 pair, ¥ 3,000) Sold as all vintage electronics with no explicit warranty, what works here may not work perfectly after shipping and might need light service. Amplifier will be packed extremely well and with care, look at my feedback, especially with turntables and other vintage electronics.

Sansui AU-D607, just serviced. Japanese Domestic Item, 100v. Comes with stepdown transformer. This is a DC pre-main amplifier equipped with a diamond differential circuit that identifies the essence of audio amplifier as music playback. The design further improves the DC conversion of the amplifier section. The equalizer section, flat amplifier section, and power amplifier section are all composed of DC amplifiers with excellent dynamic characteristics. In addition, all block stage inputs are all FET inputs and are used as a push-pull input circuit, and the input capacitors of all block stages are eliminated in the direct coupling system. This eliminates the low-frequency phase rotation that occurs when a capacitor enters the signal path, and other factors that degrade sound quality. As a result, pure music signal transmission and a wide range are achieved. A diamond differential circuit is mounted on the power amplifier. The first stage adopts a differential circuit with constant current using dual FET capable of passing a large current with low noise characteristics, and the second stage adopts a diamond differential circuit with cascode bootstrap. And, NM (Non Magnetic) transistor with good linearity is used for the power stage, and the whole circuit is composed of symmetrical symmetrical circuit and 2 pole phase correction circuit, which realizes waveform transmission with little distortion up to high frequency range. The circuit configuration of the equalizer amplifier section is a direct-coupled system in which input capacitors that cause sound quality degradation are removed. A high-stability, low-noise, high-gm dual FET is used for the first stage, a push-pull drive with two differential stages and a current differential with a current mirror is used, and a pure SEPP output is provided. The equalizer for the NF circuit uses a high-precision metal film resistor and a styrofoam capacitor with low capacitance error and excellent temperature characteristics. The flat amplifier section also uses a direct coupling method without input capacitors that are not effective in sound quality. The first stage consists of cascode connection and differential amplification with current source using dual FET of low-noise and high-gm, and the second stage consists of 8 devices using current differential push-pull circuit with current mirror. Like the DC power amplifier section, it has excellent open-loop characteristics to reduce TIM distortion. When the tone is turned on, the flat amplifier is switched to an NF-type tone amplifier, which provides a simple tone control characteristic with less distortion. The power supply section is a 2-power transformer, and the left and right sides are completely independent. In addition, by using 12,000 ? Fx4 electrolytic capacitors and metalized film capacitors, low impedance characteristics from ultra-low band to ultra-high band are achieved. Equipped with MC head amplifier. Equipped with a loudness switch, subsonic filter, Tone defeat switch and balance control. Tape play function and tape copy function can be performed independently, and the tuner signal can be extracted independently for recording. For example, you can air check while listening to a record. The speaker output can be connected in two ways : OFF, A, B, or A + B. Three spare AC outlets (100W for one interlocked circuit, 250W for two non-interlocked circuits) and ground terminal are mounted. Pre-power and power can be separated. TypeWide-range DC pre-main amplifier Power Amplifier Unit Effective power70W + 70W (10 Hz ~ 20 kHz, THD 0.008%, 8 ?) 70W + 70W (1 kHz, THD 0.003%, 8 ?) Total harmonic distortion factor0.008% or Less (10 Hz to 20 kHz, 8 ? at Effective Output) Intermodulation distortion factor (70 hz : 7 khz = 4 : 1)Not more than 0.008% Output bandwidth5 Hz ~ 70 kHz (IHF, Both Channel Operation, 1 kHz, 8 ?) Damping factor100 (IHF, Double-channel Operation, 1 kHz, 8 ?) Frequency characteristicDC ~ 400 kHz, + 0 -3dB Input Sensitivity / Input Impedance1V/47k ? (1 kHz) Signal-to-noise ratio125 dB or more (IHF, A-network, short circuit) Channel separation90 dB or More (IHF, 1 kHz) Rise time0.5 ? sec Slew rate± 160 V / ? sec Preamplifier Section Input Sensitivity / Input Impedance (1kHz)Phono-1MM : 2.5mV/47k ? Phono-2MC Only : 0.1mV/100 ? AUX, Tuner, Tape Play 1, 2 (PIN) : 150mV/47k ? MC compatible impedance100 ? or less Phono maximum allowable input (1 kHz)Phono MM:300mV(THD 0.01%) Phono MC:15mV(THD 0.03%) Output Voltage (1 kHz)Tape Rec1, 2 (at PIN, 47k ?) : 150 mv Pre Out (at 47k ?) : 1 V Max Pre Out (at THD 0.05%, 47k ?) : 4 v Output Impedance (1 kHz)Tape Rec1, 2 : 600 ? or less Total harmonic distortion factorPhono MC (1 kHz, 6 V) : 0.01% or less Phono MM (20 Hz to 20 kHz, 6 V) : 0.005% or less AUX, Tuner, Tape Play 1, 2 (20 Hz to 20 kHz, 1 V) : 0.005% or less Intermodulation distortion factor (70 hz : 7 khz = 4 : 1)AUX, Tuner, Tape Play 1, 2 (1 v) : not more than 0.005% Frequency characteristicRIAA deviation (Phono 1, 2, 20 Hz-20 kHz) + / - 0.2 dB AUX, Tuner, Tape Play 1, 2 : 5 hz to 100 khz, + 0 -1dB Signal-to-noise ratio (IHF, A-network Short circuit)Phono MC (input conversion) : -152dBV Phono MM : 88 dB or more AUX, Tuner, Tape Play 1, 2 : 100 dB or more Channel separation (IHF, 1 kHz)Phono MC : 70 dB or more Phono MM : 70 dB or more AUX, Tuner, Tape Play 1, 2 : 75 dB or higher Input-to-input separation (input short, 1 kHz)Tuner ? Phono MM : 90 dB or higher Tape Play 1, 2 ? Phono MM : 90 dB or more Tuner ? Tape Play 1, 2 : 90 dB or higher Tape Play 1 ? Tape Play 2 : 90 dB or higher Tone controlBass : ± 10 dB (50 Hz) Treble : ± 10 dB (15 kHz) Subsonic filter16 Hz (-3dB, 6dB/oct.) Loudness (at volume -30dB)+10dB(50Hz) +4dB(10kHz) Headphone jack output85 mw (8 ?) Load impedance4 ~ 16 ? Rated power consumption195W (Electrical Appliance and Material Control Law) External dimensionsWidth 430x Height 168x Depth 390 mm With Rack-Mount Adapter : Width 482x Depth 418 mm Weight15.5kg With rack-mount adapter : 16 kg Sold SeparatelyRack-Mount Adapter BX-7 (1 pair, ¥ 3,000)

YOU ARE BUY NOW ORIGINAL SANSUI RECEIVER VOLUME/MOTOR MECH F-3315 CONTROL PCB PCB.......,ITEM USED... ....CONDITION GOOD , AND WORKING GOODORIGINAL VOLUME/MOTOR MECH F-3315 CONTROL PCB USED FOR SANSUI MODEL .....9900Z...........,GOOD WORKING.......PLEASE SEE PHOTO.....ITEM FREE SHIPPING IN US..NO SHIPPING INTERNATIONAL,AND HI, AKITEM RETURNS ACCEPTED WITHIN 14 DAY, AFTER RECEIVING ITEM ... NO ACCPETED RETURN SHIPPING LABLE ......RETURN SHIPPING WILL BE PAID BY BUYER

Please Note shipping from Japan. Policy Payment Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Cancellations & Returns Cancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back. International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Works great. Comes in original box. This Sansui PC-V300 Compact Disc Player is a must-have for any audiophile or collector. With its sleek design and high-quality sound, this vintage piece is a true gem. The brand and model are well-known for their durability and performance, making this a reliable addition to any home audio setup. Whether you're looking to relive the glory days of CD players or simply enjoy the warm tones of vintage audio equipment, the Sansui PC-V300 is the perfect choice. Its compatibility with various CDs and high-precision digital-to-analog conversion ensure a clear and refined sound that is sure to impress. Don't miss out on this opportunity to own a piece of audio history.

Sansui 19 TV Computer PC Monitor Widescreen / Flatscreen HD LCD Television MODEL: HDLCD19WB PORTS / CONNECTIONS INCLUDE: * VGA / PC MONITOR * Coaxial / Antenna * Digital Audio Coax * Component (YPbPr) * Audio / Stereo L/R RCA * Video RCA * Headphone audio jack Buttons on side have options to make it easy to use, even without a remote. Measures: 14.5 tall x 18.25 wide (including base and bezel) 19 screen diagonal (excluding bezel) TESTED AND WORKING All connection ports tested and working. Screen, video, and audio all normal with no distortion. All buttons tested and working properly. Power flow consistent. EXCELLENT CONDITION No cracks, scratches, or chips. See photos for monitor in action. Will be packed well for safe shipping! SHIPS OUT SAME DAY! Multiple carrier options available. Please choose the best rate from the drop down menu. Check out my store for more cool electronics and vintage finds! Im adding new inventory daily so be sure to follow and check back for more! Thanks for stopping by! :)

This has been tested and working! Has all the connections you can think of!!!! Works as a TV and or computer screen with just a flip of the remote! With remote, cables listed below, stand, and 90 day warranty!! Power Cord HDMI Cable CoAxle Cable RCA Cable VGA Cable Universal Remote Will ship flat Rate Fed Ex Ground Insured!!

This has been tested and working! Has all the connections you can think of!!!! Works as a TV and or computer screen with just a flip of the remote! With remote, cables listed below, stand, and 90 day warranty!! Power Cord HDMI Cable CoAxle Cable RCA Cable VGA Cable Universal Remote Will ship flat Rate Fed Ex Ground Insured!!

Sansui 19 TV Computer PC Monitor Widescreen / Flatscreen HD LCD Television MODEL: HDLCD19WB PORTS / CONNECTIONS INCLUDE: * VGA / PC MONITOR * Coaxial / Antenna * Digital Audio Coax * Component (YPbPr) * Audio / Stereo L/R RCA * Video RCA * Headphone audio jack Buttons on side have options to make it easy to use, even without a remote. Measures: 14.5 tall x 18.25 wide (including base and bezel) 19 screen diagonal (excluding bezel) TESTED AND WORKING All connection ports tested and working. Screen, video, and audio all normal with no distortion. All buttons tested and working properly. Power flow consistent. EXCELLENT CONDITION No cracks, scratches, or chips. See photos for monitor in action. Will be packed well for safe shipping! SHIPS OUT SAME DAY! Multiple carrier options available. Please choose the best rate from the drop down menu. Check out my store for more cool electronics and vintage finds! Im adding new inventory daily so be sure to follow and check back for more! Thanks for stopping by! :)

This has been tested and working! Has all the connections you can think of!!!! Works as a TV and or computer screen with just a flip of the remote! With remote, cables listed below, stand, and 90 day warranty!! Power Cord HDMI Cable CoAxle Cable RCA Cable VGA Cable Universal Remote Will ship flat Rate Fed Ex Ground Insured!!

This Sansui 19-inch TV is a great addition to your home entertainment system. Enjoy high-quality visuals with its LCD display technology and 720p (HD) maximum resolution. You can easily connect it to your PC with the VGA port and HDMI audio/video inputs. The TV comes with a remote control and power cord for your convenience. It was manufactured in 2011 in China. This TV is perfect for anyone looking for a reliable and affordable option.

This item is in very good working condition. No screen scratches and light wear on the case. Remote included.

Tested, condition as shown in photos. Only comes with power cable.

This has been tested and working! Has all the connections you can think of!!!! Works as a TV and or computer screen with just a flip of the remote! With remote, cables listed below, stand, and 90 day warranty!! Power Cord HDMI Cable CoAxle Cable RCA Cable VGA Cable Universal Remote Will ship flat Rate Fed Ex Ground Insured!!

This is for a Sansui TV 19inch in good condition. The TV was tested to turn on and stay on while I was testing it before listing but I ended up stop using months ago because it seem to keep turning off on me. Not sure if it was a one time thing or what but that is why I am listing for parts. The screen has lite wear and lite wear on the housing of the TV. Check Pictures for further information.

This has been tested and working! Has all the connections you can think of!!!! Works as a TV and or computer screen with just a flip of the remote! With remote, cables listed below, stand, and 90 day warranty!! Power Cord HDMI Cable CoAxle Cable RCA Cable VGA Cable Will ship flat Rate Fed Ex Ground Insured!!

Sehr guten Zustand

Sansui PC-V750 Condition: Used Manufactured: June, 1985 Remote: N/A Made in: Japan Solid and rare working example of this Sansui compact disc player. Great condition and sound. scammer warning: All serial numbers - including those on individual parts and components - collected and logged. Packaging video logged. Will prosecute fraud to fullest extent of Ebay, federal, state and local laws.

This is for a Sansui TV 19inch in good condition. The TV was tested to turn on and stay on while I was testing it before listing but I ended up stop using months ago because it seem to keep turning off on me. Not sure if it was a one time thing or what but that is why I am listing for parts. The screen has lite wear and lite wear on the housing of the TV. Check Pictures for further information.