Anti skate weight for the tonearm of the Sansui SR 525. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. NOTE:- This tonearm also uses a lateral balance weight that slides on a bar and this is not that item. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Anti skate weight for the tonearm of the Sansui SR 717 turntable. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. NOTE:- This tonearm also uses a lateral balance weight that slides on a bar and this is not that item. If you are missing the lateral balance weight I can make one for you. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Anti skate weight for the tonearm of the Sansui FR-1080. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

FACTORY OEM SANSUI COUNTERWEIGHTFits Sansui SR-212 SEE PHOTOS FOR DETAIL.

Sansui Eight Solid State Stereo AM/FM Tuner Receiver for Parts or Repair ….. **Power cord Not Included** Tested for sound through all channels ….. Tuner dial needs adjustment (works on the right end), volume dial needs cleaned (worked after turning back and forth) No further testing available ….. Actual item pictured, nothing else included …. Ships to USA only (48 States) ….

Up for sale is this Vtg Sansui SR-212 Record Player Turntable Tonearm Counterweight Rear Weight with minor signs of use and wear. Please ask questions before you bid. The buyer will pay $6.95 for packing and shipping to the lower 48 via USPS 1st class Mail. Thanks for looking!!!!

Vintage Sansui Turntable Tonearm COUNTERWEIGHT FR-Q5 & others

For sale: Original Vintage Sansui P-50 Turntable Tonearm Socket Counterweight Excellent condition. Please refer to the pictures. Shipping and Handling by Airmail: (Prices in CAD $)Québec and Ontario : $15 / Other Canadian Provinces : $17.00[Deep North will be more] USA : $20International :Email me!IMPORTANT: WAIT FOR THE INVOICE FOR THE RIGHT SHIPPING COST PAYPAL AND SHIP WORLDWIDE!

Sansui Eight Deluxe Stereo Receiver. The receiver is sold as for repair The fm section is faulty as the sound coming is of very low volume All other inputs works fine Great phono stage Pre power separation possible This sounds great Demo offered if collected If you are not using fm radio this is a great amp Thanks

Vintage Sansui Turntable Tonearm COUNTERWEIGHT FR-Q5 & others

Sansui SR-525 Counter Weight Item is in very good condition. See photos for over all condition.

Vintage Sansui Turntable Tonearm COUNTERWEIGHT FR-Q5 & others

PaymentRest assured that our store offers a variety of payment methods.Please pay within 5 days after auction is finished. About UsWe are located in Japan.For electrical products check the manufacturer and product and convert to the voltage of each country.We plan to ship by FedEx or DHL.Please contact us as the shipping fee can be changed in some cases. Its our pleasure to make you happy by proposing our recommend item.If you have any questions or request about items please feel free to ask us. International Buyers - Please Note:-Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.-Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.-These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.-We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior.>

Light Weight Headshell & Cartridge Mounting Screw Set For Sansui Turntables. The Picture shows Exactly what you are Buying & will Receive.The Headshell - Cartridge Mounting Kits Include the Parts Listed Below.2 x M2.5x3 mm Stainless Steel Screws.2 x M2.5x6 mm Stainless Steel Screws.2 x M2.5x8 mm Stainless Steel Screws.2 x M2.5x10 mm Stainless Steel Screws.2 x M2.5x12 mm Stainless Steel Screws.2 x M2.5x14 mm Stainless Steel Screws.2 x M2.5x16 mm Stainless Steel Screws.2 x M2.5x18 mm Stainless Steel Screws.2 x M2.5x20 mm Stainless Steel Screws.18 x M2.5 Brass Fixing Nuts.18 x Nylon Washers.1 x M2 Allen Key.They can be Use with the Following Makes Of Tonearm: SME (all Models) Linn (all Models) Thorens (all Models) Grace (all Models) Rega (all Models) Acos Lustre (all Models) Roksan (all Models) ARB (all Models) Origin Live (all Models) Inspire Hi Fi (all Models) Mission (all Models) Hadcock (all Models) Koetsu (all Models) ADC (all Models) Jelco (all Models) Naim (all Models) Goldring (all Models) Acoustic Research (all Models) Townsend (all Models) Michell (all Models) Dual (all Models) Pro-Ject (all Models) They Can Also Be Used With The Following Makes Of Turntable: Thorens (all Models) Technics (all Models) Audio Technica (all Models) Rotel (all Models) Pioneer (all Models) Sony (all Models) Toshiba (all Models) Yamaha (all Models) Sansui (all Models) Luxman (all Models)They can be used with almost all MM Moving Magnet & MC Moving Coil Cartridges.Below Is A Question & Answer Section, This Will Hopefully Answer Most Customer Questions. Q: How Long Will I Have To Wait For My Order To Arrive ? A: We send Most Items On A 48hr Service. Purchases Made On A Thursday Through Sunday Are Sent On The Following Monday (Except On Bank Holiday Mondays)Q: Do You Provide Tracking Details ? A: Yes, We Always Upload Full Tracking details To Your PayPal Account Once Your Item Has Been Packed To Ship.Q: My Tracking Details Do Not Work, Why ? A: Once Your Order Has Been Collected Your Tracking Details Will Work. Normally After 7pm Onwards On The Day Of Collection From Us.Q: Can You Send My Order To A Non Registered eBay - PayPal Address ? A: No, This Is Not Possible. PLEASE DO NOT ASK!Q: Will You Send By A Cheap Non Signed For Courier ? A: No, All Items Are Always Send Fully Signed For & Fully Trackable.Q: Will You Send Overseas ?A: We Ship To Many Countries Via eBay Global Shipping.Q: What Are The Costs To Ship To Me Overseas ?A: eBay Show These Costs At The Point Of Checkout, You Can See Them Before Making A Purchase.Overseas Shipping Is Available via eBay Global Shipping, If Your Country Is Not Included In Our Global Shipping Shipping Selections It Will Not Be Possible To Ship To Your Country.

Original Parts----Sansui SR-232 Counterweight in used condition / dry stored for many years---with age related marks---cash on collection is welcomeorFree Uk post courier sign for----please view my other sansui parts

Anti skate weight for the tonearm of the Sansui FR-1080. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Anti skate weight for the tonearm of the Sansui SR 717 turntable. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. NOTE:- This tonearm also uses a lateral balance weight that slides on a bar and this is not that item. If you are missing the lateral balance weight I can make one for you. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Anti skate weight for the tonearm of the Sansui FR-3060 turntable. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Anti skate weight for the tonearm of the Sansui SR 525. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. NOTE:- This tonearm also uses a lateral balance weight that slides on a bar and this is not that item. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Anti skate weight for the tonearm of the Sansui SR 212 turntable. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

VNTG Sansui Solid State Eight AM/FM Stereo Receiver Amplifier VNTG Sansui Solid State Eight AM/FM Stereo Receiver Amplifier This listing is for VNTG Sansui Solid State Eight AM/FM Stereo Receiver Amplifier in Vintage Used Condition Powers On as Intended and Knobs/ Switches seem Fine will mention is using a Replacement Electrical Cord show in last pic plz review pics. Buy with confidence from a trusted seller! Dont forget to look at My Other Items Thank You And Have A Great Day! Terms and Conditions. Return Policy: We offer a 30 day return policy on all of our items unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned as received within 30 days of receiving the item. INTERNATIONAL BUYERS: We are unable to provide a prepaid return label to buyers outside of the United States. International buyers are responsible for all customs fees and taxes (if applicable) of their country. Return shipping to be paid by the buyer. Payment: We accept PayPal, Credit cards (thru PayPal). We will not ship the item until payment has been received & cleared. Unpaid Item Case will be opened two days from sale date due to nonpayment. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We check every item to make sure it is fully Inspected before we ship it out. AUTHENTICITY:All items are absolutely authentic with no exceptions!These are premier luxury goods from the worlds top designers and tailoring houses, to your front door!

Sansui Turntable Tonearm Cartridge Mounting Screws (Ultra Light Weight Nylon) The Picture shows Exactly what you are Buying & will Receive.The Headshell - Cartridge Mounting Kits Include the Parts Listed Below.2 x M2.5x4 mm Nylon 66 Screws.2 x M2.5x6 mm Nylon 66 Screws.2 x M2.5x8 mm Nylon 66 Screws.2 x M2.5x10 mm Nylon 66 Screws.2 x M2.5x12 mm Nylon 66 Screws.2 x M2.5x15 mm Nylon 66 Screws.2 x M2.5x18 mm Nylon 66 Screws.2 x M2.5x20 mm Nylon 66 Screws.16 x M2.5 Nylon 66 Fixing Nuts.16 x Nylon Washers.They can be Use with the Following Makes Of Tonearm: SME (all Models) Linn (all Models) Thorens (all Models) Grace (all Models) Rega (all Models) Acos Lustre (all Models) Roksan (all Models) ARB (all Models) Origin Live (all Models) Inspire Hi Fi (all Models) Mission (all Models) Hadcock (all Models) Koetsu (all Models) ADC (all Models) Jelco (all Models) Naim (all Models) Goldring (all Models) Acoustic Research (all Models) Townsend (all Models) Michell (all Models) Dual (all Models) Pro-Ject (all Models) They Can Also Be Used With The Following Makes Of Turntable: Thorens (all Models) Technics (all Models) Audio Technica (all Models) Rotel (all Models) Pioneer (all Models) Sony (all Models) Toshiba (all Models) Yamaha (all Models) Sansui (all Models) Luxman (all Models) Goldring (All Modes) Dual (All Models) Denon (All Models) Hitachi (All Models) Trio (All Models) Kenwood (All Models) Acoustic Research (All Models) A&R (All Models) + Many Other Makes.These are by far the Best Choice for use with MC Moving Coil Cartridges.They can be used with almost all MM Moving Magnet Cartridges as well.Below Is A Question & Answer Section, This Will Hopefully Answer Most Customer Questions. Q: How Long Will I Have To Wait For My Order To Arrive ? A: We send Most Items On A 48hr Service. Purchases Made On A Thursday Through Sunday Are Sent On The Following Monday (Except On Bank Holiday Mondays)Q: Do You Provide Tracking Details ? A: Yes, We Always Upload Full Tracking details To Your PayPal Account Once Your Item Has Been Packed To Ship.Q: My Tracking Details Do Not Work, Why ? A: Once Your Order Has Been Collected Your Tracking Details Will Work. Normally After 7pm Onwards On The Day Of Collection From Us.Q: Can You Send My Order To A Non Registered eBay - PayPal Address ? A: No, This Is Not Possible. PLEASE DO NOT ASK!Q: Will You Send By A Cheap Non Signed For Courier ? A: No, All Items Are Always Send Fully Signed For & Fully Trackable.Q: Will You Send Overseas ?A: We Ship To Many Countries Via eBay Global Shipping.Q: What Are The Costs To Ship To Me Overseas ?A: eBay Show These Costs At The Point Of Checkout, You Can See Them Before Making A Purchase.Overseas Shipping Is Available via eBay Global Shipping, If Your Country Is Not Included In Our Global Shipping Shipping Selections It Will Not Be Possible To Ship To Your Country.

Anti skate weight for the tonearm of the Sansui SR 212 turntable. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Anti skate weight for the tonearm of the Sansui FR-1080. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *