Sansui AU-?607 MOS Premium MOS FET integrated amplifier DescriptionThere are scratches and dirt. There are no burnt-out lamps or other problems. The product maintenance is as follows. ?Internal cleaning?Cleaning of each switch, volume, etc.?Re-soldering of deteriorated soldering?Maintenance of the protection relay.?Checking and adjustment of DC leakage from the speaker terminals.?Cleaning of the rear terminals?There are scratches on the whole surface, and there are also scratches and dents on the side wood panel, etc.ShippingEstimated delivery time after shipping Standard International Shipping (7 to 14 business days)FedEx International Economy (2 to 4 business days)Expedited Shipping (1 to 3 business days) *Delivery company business days vary by country. *Saturdays and Sundays are not open, so business calculations are based on weekdays. *Deliveries are estimates only and may be delayed due to social conditions.International Buyers - Please Note: Import duties, taxes and fees are not included in the item price or shipping charges. These costs are the responsibility of the buyer. Please check with your countrys customs office to find out how much these additional costs will be before bidding or purchasing. If your address is billed remotely, you will be charged for the additional shipping costs. Thank you for your understanding.

Sansui AU-?607KX Stereo Integrated Amplifier Tested from Japan Description Condition: used Manufactured circa 1992. Scratches and rust are scattered throughout the exterior, and are noticeable on the top panel and corners. The terminals are corroded and lightly stained, and appear to be in good condition for their age. This is the main unit only. The tone control is in good condition and the sound output is good. The rubber feet on the bottom of the unit are slightly torn and deteriorated. We have cleaned and checked the operation.Gross weight: 20kg All my products are 100% Authentic.Please feel free to contact us if you have any question.Please check the picture. Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

eBay listing template by 3Dsellers.com - Try for Free!

Description+++ The operation has been checked. We have checked the operation of the device and the sound output, etc. and found no problems. There is an instruction manual. Shipping+++ Fedex International Buyers - Please Note+++ Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

SANSUI AU-?607MR Vollverstärker mit Bedienungsanleitung gebraucht BeschreibungBetrieb wurde bestätigt. ZahlungBitte bezahlen Sie innerhalb von 3 Tagen nach Ihrem Kauf.Versand Wir versenden ein Produkt mit sorgfältiger Verpackung. Nach Bestätigung Ihrer Zahlung versenden wir diesen Artikel innerhalb von 3-7 Werktagen. (außer Samstag, Sonntag und Nationalfeiertag in JAPAN) Wochenenden sind nicht möglich, da FedEx oder DHL geschlossen sindInternationale Käufer - Bitte beachten Sie:  Einfuhrzölle, Steuern und Abgaben sind nicht im Artikelpreis enthalten bzw. Versandkosten. Diese Gebühren trägt der Käufer. Bitte erkundigen Sie sich bei der Zollstelle Ihres Landes, welche diese zusätzliche Kosten fallen vor Gebotsabgabe oder Kauf an.

SANSUI AU-?607MR Integrated Amplifier with Instruction Manual Used DescriptionOperation has been confirmed. PaymentPlease pay within 3days after your purchase.Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 3-7 business days. (except for Saturday, Sunday and national holiday in JAPAN ) Weekends are not available because FedEx or DHL are closedInternational Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

SANSUI AU-?607DR Integrierter Verstärker Schwarz Guter Zustand Gebraucht Das Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns.   Sansui AU-?607DR Integrierter Verstärker Schwarz Guter gebrauchter Zustand  Beschreibung Bei Fragen stehe ich Ihnen gerne zur Verfügung.Bitte überprüfen Sie den Zustand des Produkts auf dem Foto.Alle Artikel sind auf dem Bild zu sehen.?Hinweis: Nur für eingeschaltete Produkte. Produkte, die sich nicht einschalten lassen, sind nicht zulässig?  Die Stromversorgung für dieses Produkt beträgt AC100V 50/60Hz.In manchen Ländern kann ein Transformator erforderlich sein.Bitte legen Sie den Trafo kaufseitig bereit. Steckdosen-Spezifikationen ? Typ AWenn es sich vom Typ A unterscheidet, ist ein Konverter erforderlich.     Sie in anderen Bereichen als 100 V.Wenn Sie den von mir verkauften Transformator verwenden, können Sie ihn in anderen Bereichen als 100 V einsetzen.ebay.comhttps://www.ebay.com/itm/373547463184ebay.ukhttps://www.ebay.com/itm/373547520813ebay.euhttps://www.ebay.com/itm/373547520926ebay.auhttps://www.ebay.com/itm/373547520958Wir verkaufen auch über andere Plattformen als ebay.com.Bitte nehmen Sie Kontakt mit uns auf, wenn Sie kaufen möchten.Bei weiteren Fragen stehe ich Ihnen gerne zur Verfügung.* In manchen Gegenden ist dies möglicherweise nicht möglichBitte überlegen Sie es sorgfältig.Zahlung ??Bitte Zahlung innerhalb ??3 Tage nach Auktionsende. Versand per Express EMS oder DHL oder FedExWir liefern mit der schnellsten Versandmethode.Versand mit Schaden-/VerlustversicherungMit Trackingnummer??(10–15 Tage in die USA) ??(10–30 Tage oder mehr in andere Länder) Verkaufsbedingungen ??[Über zurückgegebene Waren]????Rücksendungen werden nur akzeptiert, wenn der Artikel?   nicht der in der Auktion beschriebene Artikel.            [Zurückkehren]       Rücksendungen aus persönlichen Gründen werden nicht angenommen.    Internationale Käufer - Bitte beachten Sie: Diese Gebühren gehen zu Lasten des Käufers. Bitte erkundigen Sie sich beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sind, bevor Sie ein Gebot abgeben oder einen Kauf tätigen.  Zur Verfügung gestellt von HARUBei Fragen stehe ich Ihnen gerne zur Verfügung.Bitte überprüfen Sie den Zustand des Produkts auf dem Foto.Alle Artikel sind auf dem Bild zu sehen.?Hinweis: Nur für eingeschaltete Produkte. Produkte, die sich nicht einschalten lassen, sind nicht zulässig?  Die Stromversorgung für dieses Produkt beträgt AC100V 50/60Hz.In manchen Ländern kann ein Transformator erforderlich sein.Bitte legen Sie den Trafo kaufseitig bereit. Steckdosen-Spezifikationen ? Typ AWenn es sich vom Typ A unterscheidet, ist ein Konverter erforderlich.     Sie in anderen Bereichen als 100 V.Wenn Sie den von mir verkauften Transformator verwenden, können Sie ihn in anderen Bereichen als 100 V einsetzen.ebay.comhttps://www.ebay.com/itm/373547463184ebay.ukhttps://www.ebay.com/itm/373547520813ebay.euhttps://www.ebay.com/itm/ MPN AU-?607DR Brand SANSUI Type Integrated Amplifier Model AU-?607DR Color Black Year Manufactured 1987 Country/Region of Manufacture Japan Power 240 W UPC Does not apply

Sansui AU-?607DR Stereo Integrierter Verstärker Manuell Gebrauchte Guter Zustand Das Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns. viewport content=width=device-width, initial-scale=1> SANSUI AU-?607DR | Stereo-Vollverstärker, Bedienungsanleitung, gebraucht, guter Zustand  Beschreibung 441100001459]?Hinweis: Nur für eingeschaltete Produkte. Produkte, die sich nicht einschalten lassen, sind nicht zulässig?  Die Stromversorgung für dieses Produkt beträgt AC100V 50/60Hz.In manchen Ländern kann ein Transformator erforderlich sein.Bitte legen Sie den Trafo kaufseitig bereit. Steckdosen-Spezifikationen ? Typ AWenn es sich vom Typ A unterscheidet, ist ein Konverter erforderlich.     Sie in anderen Bereichen als 100 V.Wenn Sie den von mir verkauften Transformator verwenden, können Sie ihn in anderen Bereichen als 100 V einsetzen.ebay.comhttps://www.ebay.com/itm/373547463184ebay.ukhttps://www.ebay.com/itm/373547520813ebay.euhttps://www.ebay.com/itm/373547520926ebay.auhttps://www.ebay.com/itm/373547520958Wir verkaufen auch über andere Plattformen als ebay.com.Bitte nehmen Sie Kontakt mit uns auf, wenn Sie kaufen möchten.Bei weiteren Fragen stehe ich Ihnen gerne zur Verfügung.* In manchen Gegenden ist dies möglicherweise nicht möglichBitte überlegen Sie es sorgfältig.Zahlung ??Wir akzeptieren nur Zahlungen per PayPal.??Bitte Zahlung innerhalb ??3 Tage nach Auktionsende. Versand per Express EMS oder DHL oder FedExWir liefern mit der schnellsten Versandmethode.Versand mit Schaden-/VerlustversicherungMit Trackingnummer??(10–15 Tage in die USA) ??(10–30 Tage oder mehr in andere Länder) Verkaufsbedingungen ??[Über zurückgegebene Waren]????Rücksendungen werden nur akzeptiert, wenn der Artikel?   nicht der in der Auktion beschriebene Artikel.            [Zurückkehren]       Rücksendungen aus persönlichen Gründen werden nicht angenommen.    Internationale Käufer - Bitte beachten Sie: Diese Gebühren gehen zu Lasten des Käufers. Bitte erkundigen Sie sich beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sind, bevor Sie ein Gebot abgeben oder einen Kauf tätigen.  Zur Verfügung gestellt von HARU441100001459]?Hinweis: Nur für eingeschaltete Produkte. Produkte, die sich nicht einschalten lassen, sind nicht zulässig?  Die Stromversorgung für dieses Produkt beträgt AC100V 50/60Hz.In manchen Ländern kann ein Transformator erforderlich sein.Bitte legen Sie den Trafo kaufseitig bereit. Steckdosen-Spezifikationen ? Typ AWenn es sich vom Typ A unterscheidet, ist ein Konverter erforderlich.     Sie in anderen Bereichen als 100 V.Wenn Sie den von mir verkauften Transformator verwenden, können Sie ihn in anderen Bereichen als 100 V einsetzen.ebay.comhttps://www.ebay.com/itm/373547463184ebay.ukhttps://www.ebay.com/itm/373547520813ebay.euhttps://www.ebay.com/itm/373547520926ebay.auhttps://www.ebay.com/itm/373547520958Wir verkaufen auch über andere Plattformen als ebay.com.Bitte nehmen Sie Kont MPN Does not apply Brand Sansui Rated power consumption 250W Model AU-?607DR Color Black Type Integrated Amplifier UPC Does not apply

viewport content=width=device-width, initial-scale=1> SANSUI AU-?607DR | Stereo Integrated Amplifier Manual Pre-Owned Good Condition Description Model number: AU-A607DRWarranty period: 3 months Warranty Estimated shipping: 3-4 days later Registration date: September 8, 2024 Release date: 1991Features/NotesIntegrated amplifier completed by pouring Sansuis technology into a simple body Adopts revolutionary advanced A-X balance circuit Effective output: 90W + 90W (8?) Frequency characteristics: PHONO MM: 20HZ ~ 20000HZ ±0.2DBFeatures/NotesDirect input to power amplifier section, send/return to processor possible.Features/NotesMM/MC phono ico compatibleWEB No.2014310000005095[Display based on Secondhand Goods Business Law: Chiba Prefecture Public Safety Commission No. 441100001459] ?Note only for products that are turned on.?????????????Products that do not turn on are not eligible? The power supply for this product is AC100V 50/60Hz.A transformer may be required in some countries.Please prepare the transformer on the purchase side. Outlet specifications??A typeIf it is different from A type, a converter is required. You in areas other than 100V.If you use the transformer I sell, you can use it in areas other than 100V.ebay.comhttp://www.ebay.com/itm/373547463184ebay.ukhttps://www.ebay.com/itm/373547520813 ebay.euhttps://www.ebay.com/itm/373547520926ebay.auhttps://www.ebay.com/itm/373547520958We also sell other than ebay.com.Please contact us if you would like to purchase.If you have any other questions, please contact me.* It may not be possible in some areasPlease consider carefully.Payment ??We accept payment by PayPal only. ??Please payment within ??3 days after the auction closed. Shipping free shippingShip by express EMS?or DHL or FedExWe will deliver by the fastest delivery method. Shipment with damage / loss insuranceWith tracking number ??(10-15 days to US) ??(10-30days or more to Other countries) Terms of Sale ??[About returned goods]????Returns are accepted only if the item was ? not the item described in the aution. [Return] Returned goods for personal reasons will not be accepted. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Provided by HARU

SANSUI AU-?607DR | Stereo Integrated Amplifier Manual Pre-Owned Good Condition Description Model number: AU-A607DRWarranty period: 3 months Warranty Estimated shipping: 3-4 days later Registration date: September 8, 2024 Release date: 1991Features/NotesIntegrated amplifier completed by pouring Sansuis technology into a simple body Adopts revolutionary advanced A-X balance circuit Effective output: 90W + 90W (8?) Frequency characteristics: PHONO MM: 20HZ ~ 20000HZ ±0.2DBFeatures/NotesDirect input to power amplifier section, send/return to processor possible.Features/NotesMM/MC phono ico compatibleWEB No.2014310000005095[Display based on the Secondhand Goods Business Law: Chiba Prefecture Public Safety Commission No. 441100001459] If you have any questions, please feel free to contact me.Please check the condition of the product in the photo.All items are in the picture.?Note only for products that are turned on.?????????????Products that do not turn on are not eligible? The power supply for this product is AC100V 50/60Hz.A transformer may be required in some countries.Please prepare the transformer on the purchase side. Outlet specifications??A typeIf it is different from A type, a converter is required. You in areas other than 100V.If you use the transformer I sell, you can use it in areas other than 100V.ebay.comhttp://www.ebay.com/itm/373547463184ebay.ukhttps://www.ebay.com/itm/373547520813 ebay.euhttps://www.ebay.com/itm/373547520926ebay.auhttps://www.ebay.com/itm/373547520958We also sell other than ebay.com.Please contact us if you would like to purchase.If you have any other questions, please contact me.* It may not be possible in some areasPlease consider carefully.At my shop, I will check the items that need to be checked before shipping.I will take a video of the operation confirmation.You can check the video on YouTube.This service gives buyers peace of mind.Payment ??Please payment within ??3 days after the auction closed. Shipping Ship by express EMS?or DHL or FedExWe will deliver by the fastest delivery method. Shipment with damage / loss insuranceWith tracking number ??(10-15 days to US) ??(10-30days or more to Other countries) Terms of Sale ??[About returned goods]????Returns are accepted only if the item was ? not the item described in the aution. [Return] Returned goods for personal reasons will not be accepted. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Provided by HARU

Product description A 607 series integrated amplifier that uses an advanced ?-X balance circuit. The technology introduced is almost the same as the high-end model, and a newly developed insulator is used. *Advanced ?-X balance circuit has a balanced configuration in which signal transmission and amplification are performed at the same time, and the amplifiers amplification circuit and ground circuit are completely separated, so the circuit itself is generated on the speaker side. This blocks back electromotive current and common mode distortion caused by external noise. In addition, a total of four dedicated amplifiers on the + and - sides of the output drive the speakers under the same conditions from both sides, achieving low distortion, and by lowering the impedance of the circuit. The frequency characteristics have been significantly improved. The power stage is equipped with NM-LAPT developed exclusively for audio, and everything down to the bonding wire is completely non-magnetic with pure copper material to obtain excellent high frequency characteristics and current limit values. *All stages from input to output are configured as wide-range DC amplifiers, expanding the frequency characteristics of the bare characteristics, improving phase characteristics, and reducing distortion to minimize NFB. *The power stage uses a new diamond differential circuit that can take out the - side output without phase reversal, and suppresses TIM distortion due to its quick response to instantaneous signal input. Furthermore, by cascading the first-stage FETs, the circuit has a wide range and high speed. *The power supply section uses a NEW ?-X balanced power supply. As a closed loop that is independent from the ground, it minimizes power imbalance that can cause deterioration in sound quality. *A twin monaural construction is used, with the power supply section placed in the center of the amplifier and the power units placed symmetrically on either side to achieve the optimal weight balance as a structure. *Introduced isolated mechanical feedback to control amplifier vibration and resonance. Pure copper vibration damping isolation parts are used in vibration transmission paths such as between the master volume and the chassis and between the power transistor and the heat sink. Furthermore, Teflon sheets with high internal loss and excellent vibration absorption ability are pasted between the insulator and the bottom plate, and Teflon tape is pasted between the heat sink and the bonnet and chassis to isolate vibrations. *The newly developed special structure insulator is fixed with copper plated screws to suppress sound quality deterioration due to vibration. *We have carefully selected and adopted high-quality sound parts obtained through the development of Sansuis Vintage series. ARS, gold-plated lead film capacitors, RMG gold-plated resistors, etc. are used. In addition, copper plated screws are used for the front panel mounting screws. *Equipped with source power direct, all line inputs can be directly connected to the power amplifier section. *Equipped with Rec selector, 10 all gold-plated input terminals, 6 detent volumes, power cord with polarity display, etc. ?Main specifications Model Integrated Amplifier Effective output (10Hz to 20kHz, both channels operating simultaneously) 105W+105W (6?) 90W+90W (8?) Total harmonic distortion rate (at effective output) 0.003% or less (8?) Cross modulation distortion rate 0.003% or less (8?) Damping factor 150(8?) Frequency characteristics (1W) DC~300kHz+0 -3dB Input sensitivity/impedance (1kHz) 1V/5k? SN ratio (A network) 120dB or more Dynamic power 280W (2?) 220W (4?) 155W (6?) TIM distortion (SAWTOOTH) below measurement limit value Slew rate 180V/?sec Rise time 0.6?sec Input sensitivity/impedance (1kHz) Phono MM:2.5mV/47k? Phono MC:300?V/100? CD, Tuner, Line, Tape/DAT1?2?3:150mV/20k? Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mV Frequency characteristics (1W) Phono MM: 20Hz to 20kHz±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200Hz, +0 -3dB SN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or more Tone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz) Subsonic filter 16Hz(-3dB), 6dB/oct Loudness 50Hz:+6dB?10kHz:+4dB Rated power consumption 250W External dimensions Width 430x Height 161x Depth 446mm Weight 18.0kg ?The condition of the product is that there are no noticeable scratches or stains. The appearance is very beautiful and the sound is also beautiful. For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Product description A 607 series integrated amplifier that uses an advanced ?-X balance circuit. The technology introduced is almost the same as the high-end model, and a newly developed insulator is used. *Advanced ?-X balance circuit has a balanced configuration in which signal transmission and amplification are performed at the same time, and the amplifiers amplification circuit and ground circuit are completely separated, so the circuit itself is generated on the speaker side. This blocks back electromotive current and common mode distortion caused by external noise. In addition, a total of four dedicated amplifiers on the + and - sides of the output drive the speakers under the same conditions from both sides, achieving low distortion, and by lowering the impedance of the circuit. The frequency characteristics have been significantly improved. The power stage is equipped with NM-LAPT developed exclusively for audio, and everything down to the bonding wire is completely non-magnetic with pure copper material to obtain excellent high frequency characteristics and current limit values. *All stages from input to output are configured as wide-range DC amplifiers, expanding the frequency characteristics of the bare characteristics, improving phase characteristics, and reducing distortion to minimize NFB. *The power stage uses a new diamond differential circuit that can take out the - side output without phase reversal, and suppresses TIM distortion due to its quick response to instantaneous signal input. Furthermore, by cascading the first-stage FETs, the circuit has a wide range and high speed. *The power supply section uses a NEW ?-X balanced power supply. As a closed loop that is independent from the ground, it minimizes power imbalance that can cause deterioration in sound quality. *A twin monaural construction is used, with the power supply section placed in the center of the amplifier and the power units placed symmetrically on either side to achieve the optimal weight balance as a structure. *Introduced isolated mechanical feedback to control amplifier vibration and resonance. Pure copper vibration damping isolation parts are used in vibration transmission paths such as between the master volume and the chassis and between the power transistor and the heat sink. Furthermore, Teflon sheets with high internal loss and excellent vibration absorption ability are pasted between the insulator and the bottom plate, and Teflon tape is pasted between the heat sink and the bonnet and chassis to isolate vibrations. *The newly developed special structure insulator is fixed with copper plated screws to suppress sound quality deterioration due to vibration. *We have carefully selected and adopted high-quality sound parts obtained through the development of Sansuis Vintage series. ARS, gold-plated lead film capacitors, RMG gold-plated resistors, etc. are used. In addition, copper plated screws are used for the front panel mounting screws. *Equipped with source power direct, all line inputs can be directly connected to the power amplifier section. *Equipped with Rec selector, 10 all gold-plated input terminals, 6 detent volumes, power cord with polarity display, etc. ?Main specifications Model Integrated Amplifier Effective output (10Hz to 20kHz, both channels operating simultaneously) 105W+105W (6?) 90W+90W (8?) Total harmonic distortion rate (at effective output) 0.003% or less (8?) Cross modulation distortion rate 0.003% or less (8?) Damping factor 150(8?) Frequency characteristics (1W) DC~300kHz+0 -3dB Input sensitivity/impedance (1kHz) 1V/5k? SN ratio (A network) 120dB or more Dynamic power 280W (2?) 220W (4?) 155W (6?) TIM distortion (SAWTOOTH) below measurement limit value Slew rate 180V/?sec Rise time 0.6?sec Input sensitivity/impedance (1kHz) Phono MM:2.5mV/47k? Phono MC:300?V/100? CD, Tuner, Line, Tape/DAT1?2?3:150mV/20k? Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mV Frequency characteristics (1W) Phono MM: 20Hz to 20kHz±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200Hz, +0 -3dB SN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or more Tone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz) Subsonic filter 16Hz(-3dB), 6dB/oct Loudness 50Hz:+6dB?10kHz:+4dB Rated power consumption 250W External dimensions Width 430x Height 161x Depth 446mm Weight 18.0kg ?The condition of the product is C RANK: Used item with signs of use and many scratches and stains. Maintenance completed in July 2023 For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

AU-?607MR SANSUI Integrated Amplifier Operation confirmation with Instructions Description Condition: Used SANSUI Integrated Amplifier AU-?607MR Pre-Main Amplifier Product Description Brand : SANSUI Sansui Yamasui Electric Product Name : Integrated Amplifier ??????Premain Amplifier Model : AU-?607MR Color : Gold Size : W 430 x H 162 x D 452mm Weight : 18.0kg Accessories] Main unit, Instruction manual Cleaned with alcohol prior to sale. There are minor scratches and stains from use and storage, but there are no major scratches or stains that stand out. Operation has been checked. Shipping We will carefully deliver using the packingmaterial. ?Standard?Free shipping FedEx or DHL or JP : with tracking number ?Customs duties may apply. Customs duty will be borne by the buyer. If you are looking for other products, please contact me.I will make a sincere effort to be of service to you.Thank you very much for visiting my listing page. My intention is serving you with sincere manner. Returns Free returns International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Product descriptionA 607 series integrated amplifier that uses an advanced ?-X balance circuit.The technology introduced is almost the same as the high-end model, and a newly developed insulator is used.*Advanced ?-X balance circuit has a balanced configuration in which signal transmission and amplification are performed at the same time, and the amplifiers amplification circuit and ground circuit are completely separated, so the circuit itself is generated on the speaker side. This blocks back electromotive current and common mode distortion caused by external noise.In addition, a total of four dedicated amplifiers on the + and - sides of the output drive the speakers under the same conditions from both sides, achieving low distortion, and by lowering the impedance of the circuit. The frequency characteristics have been significantly improved.The power stage is equipped with NM-LAPT developed exclusively for audio, and everything down to the bonding wire is completely non-magnetic with pure copper material to obtain excellent high frequency characteristics and current limit values.*All stages from input to output are configured as wide-range DC amplifiers, expanding the frequency characteristics of the bare characteristics, improving phase characteristics, and reducing distortion to minimize NFB.*The power stage uses a new diamond differential circuit that can take out the - side output without phase reversal, and suppresses TIM distortion due to its quick response to instantaneous signal input.Furthermore, by cascading the first-stage FETs, the circuit has a wide range and high speed.*The power supply section uses a NEW ?-X balanced power supply.As a closed loop that is independent from the ground, it minimizes power imbalance that can cause deterioration in sound quality. *A twin monaural construction is used, with the power supply section placed in the center of the amplifier and the power units placed symmetrically on either side to achieve the optimal weight balance as a structure.*Introduced isolated mechanical feedback to control amplifier vibration and resonance.Pure copper vibration damping isolation parts are used in vibration transmission paths such as between the master volume and the chassis and between the power transistor and the heat sink.Furthermore, Teflon sheets with high internal loss and excellent vibration absorption ability are pasted between the insulator and the bottom plate, and Teflon tape is pasted between the heat sink and the bonnet and chassis to isolate vibrations.*The newly developed special structure insulator is fixed with copper plated screws to suppress sound quality deterioration due to vibration.*We have carefully selected and adopted high-quality sound parts obtained through the development of Sansuis Vintage series.ARS, gold-plated lead film capacitors, RMG gold-plated resistors, etc. are used.In addition, copper plated screws are used for the front panel mounting screws.*Equipped with source power direct, all line inputs can be directly connected to the power amplifier section.*Equipped with Rec selector, 10 all gold-plated input terminals, 6 detent volumes, power cord with polarity display, etc.?Main specificationsModel Integrated AmplifierEffective output (10Hz to 20kHz, both channels operating simultaneously) 105W+105W (6?) 90W+90W (8?)Total harmonic distortion rate (at effective output) 0.003% or less (8?)Cross modulation distortion rate 0.003% or less (8?)Damping factor 150(8?)Frequency characteristics (1W) DC~300kHz+0 -3dBInput sensitivity/impedance (1kHz) 1V/5k?SN ratio (A network) 120dB or moreDynamic power 280W (2?) 220W (4?) 155W (6?)TIM distortion (SAWTOOTH) below measurement limit valueSlew rate 180V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM:2.5mV/47k?Phono MC:300?V/100?CD, Tuner, Line, Tape/DAT1?2?3:150mV/20k?Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mVFrequency characteristics (1W) Phono MM: 20Hz to 20kHz±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200Hz, +0 -3dBSN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or moreTone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz)Subsonic filter 16Hz(-3dB), 6dB/octLoudness 50Hz:+6dB?10kHz:+4dBRated power consumption 250WExternal dimensions Width 430x Height 161x Depth 446mmWeight 18.0kg?The condition of the product is that there are no noticeable scratches or stains.The appearance is very beautiful and the sound is also beautiful.For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Product descriptionA 607 series integrated amplifier that uses an advanced ?-X balance circuit.The technology introduced is almost the same as the high-end model, and a newly developed insulator is used.*Advanced ?-X balance circuit has a balanced configuration in which signal transmission and amplification are performed at the same time, and the amplifiers amplification circuit and ground circuit are completely separated, so the circuit itself is generated on the speaker side. This blocks back electromotive current and common mode distortion caused by external noise.In addition, a total of four dedicated amplifiers on the + and - sides of the output drive the speakers under the same conditions from both sides, achieving low distortion, and by lowering the impedance of the circuit. The frequency characteristics have been significantly improved.The power stage is equipped with NM-LAPT developed exclusively for audio, and everything down to the bonding wire is completely non-magnetic with pure copper material to obtain excellent high frequency characteristics and current limit values.*All stages from input to output are configured as wide-range DC amplifiers, expanding the frequency characteristics of the bare characteristics, improving phase characteristics, and reducing distortion to minimize NFB.*The power stage uses a new diamond differential circuit that can take out the - side output without phase reversal, and suppresses TIM distortion due to its quick response to instantaneous signal input.Furthermore, by cascading the first-stage FETs, the circuit has a wide range and high speed.*The power supply section uses a NEW ?-X balanced power supply.As a closed loop that is independent from the ground, it minimizes power imbalance that can cause deterioration in sound quality. *A twin monaural construction is used, with the power supply section placed in the center of the amplifier and the power units placed symmetrically on either side to achieve the optimal weight balance as a structure.*Introduced isolated mechanical feedback to control amplifier vibration and resonance.Pure copper vibration damping isolation parts are used in vibration transmission paths such as between the master volume and the chassis and between the power transistor and the heat sink.Furthermore, Teflon sheets with high internal loss and excellent vibration absorption ability are pasted between the insulator and the bottom plate, and Teflon tape is pasted between the heat sink and the bonnet and chassis to isolate vibrations.*The newly developed special structure insulator is fixed with copper plated screws to suppress sound quality deterioration due to vibration.*We have carefully selected and adopted high-quality sound parts obtained through the development of Sansuis Vintage series.ARS, gold-plated lead film capacitors, RMG gold-plated resistors, etc. are used.In addition, copper plated screws are used for the front panel mounting screws.*Equipped with source power direct, all line inputs can be directly connected to the power amplifier section.*Equipped with Rec selector, 10 all gold-plated input terminals, 6 detent volumes, power cord with polarity display, etc.?Main specificationsModel Integrated AmplifierEffective output (10Hz to 20kHz, both channels operating simultaneously) 105W+105W (6?) 90W+90W (8?)Total harmonic distortion rate (at effective output) 0.003% or less (8?)Cross modulation distortion rate 0.003% or less (8?)Damping factor 150(8?)Frequency characteristics (1W) DC~300kHz+0 -3dBInput sensitivity/impedance (1kHz) 1V/5k?SN ratio (A network) 120dB or moreDynamic power 280W (2?) 220W (4?) 155W (6?)TIM distortion (SAWTOOTH) below measurement limit valueSlew rate 180V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM:2.5mV/47k?Phono MC:300?V/100?CD, Tuner, Line, Tape/DAT1?2?3:150mV/20k?Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mVFrequency characteristics (1W) Phono MM: 20Hz to 20kHz±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200Hz, +0 -3dBSN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or moreTone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz)Subsonic filter 16Hz(-3dB), 6dB/octLoudness 50Hz:+6dB?10kHz:+4dBRated power consumption 250WExternal dimensions Width 430x Height 161x Depth 446mmWeight 18.0kg?The condition of the product is C RANK: Used item with signs of use and many scratches and stains.Maintenance completed in July 2023For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

?PRODUCTS?Please check the Photo. Operation confirmed Fully functional No problems with operation. No sign of use, in very good condition ?PAYMENTS?We accept PayPal and all major Debit / Credit Cards.We can only ship your item after your payment clears.We ship within 10 days of payment. ?CHECKOUT?Please check your address before paying becausewe can ONLY ship to addresses that are enteredbefore placing the order.We cannot change an address after the order hasalready been placed. ?SHIPPING?Packages:Box and Bubble wrapPackages usually leave our warehousewithin 10 days of payment.Weekend orders will ship on Monday or Tuesday.We provide valid Tracking Numbers for all orders. ?International Packages?We ship to all US Territories, Europe and Asiaand Middle East and Australia and Canadaincluding Guam and Hawaii.All our international packages ship underthe Fedex or Japan Post. ?CUSTOMER SERVICE?If you have any questions or issues,we are at your service.You can email us anytime through eBay messages. ?RETURN INFORMATION?We offer a standard FREE 30 days refund or exchange policy.Item must be returned in original conditionin order to receive a full refund. ?Customs duty?Import duties, taxes, and charges are notincluded in the item price or shipping cost.These charges are the buyers responsibility.Please check with your countrys customs officeto determine what these additional costswill be prior to bidding or buying.We will reply to your question or invoice within 3 days.We cant not reply gifts or unreasonablerequests such as declared amount.

DescriptionGrade : Used Operation confirmed. There are some scratches. All my products are 100% Authentic. Payment We usually ship within 5 business days of receiving cleared payment. Shipping We ship using FedEx, DHL and Japan Post.International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer?s responsibility.Please check with your country?s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. We do not undervalue (i.e., ship as a gift or greeting card). Buyer is responsible for payment of customs duties. No refunds will be made for refusal to pay customs duties.

Vintage Sansui Integrated Amplifier AU-?607i good condition from Japan Description Condition: Everything in the photo is included. Product condition: Normal operation.Functions such as input from each terminal, speaker A/B, headphone output, tone, balance, mute, loudness, etc. have been confirmed.*Rec Out has not been confirmed as there is no way to inspect it. Product appearance: Rust on top plate, small scratches Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

DescriptionGrade : Used Operation confirmed. The REC selector doesnt respond well, but I dont use it much so I dont think its a problem. There are some scratches. All my products are 100% Authentic. Payment We usually ship within 5 business days of receiving cleared payment. Shipping We ship using FedEx, DHL and Japan Post.International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer?s responsibility.Please check with your country?s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. We do not undervalue (i.e., ship as a gift or greeting card). Buyer is responsible for payment of customs duties. No refunds will be made for refusal to pay customs duties.

ShippingPlease select the delivery method from the following. Expedited shippingDelivery method: DHLorFedExorJapanPost*It will arrive in 3 -7 days.*With tracking number and insurance. Characteristics of the store *In order to deliver packages safely to overseas customers, we pack them carefully and deliver the products safely. *We will ship the item as soon as it is ready. *To satisfy all customers, we will respond to individual inquiries politely and promptly.International Buyers - Please Note Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. 1.Notes (Please read before purchasing.) *If the buyers address is a remote location, an additional $25 is required. The voltage of the electronic device on display is 100 VAC, a Japanese product. If you use the voltage in your country, we recommend using a transformer.

VersandBitte wählen Sie nachfolgend die Versandart aus. ExpressversandVersandmethode: DHLoderFedExoderJapanPost*Es wird in 3–7 Tagen eintreffen.*Mit Trackingnummer und Versicherung. Eigenschaften des Ladens *Um Pakete sicher an Kunden im Ausland zuzustellen, verpacken wir sie sorgfältig und liefern die Produkte sicher aus. *Wir versenden den Artikel, sobald er fertig ist. *Um alle Kunden zufrieden zu stellen, beantworten wir individuelle Anfragen höflich und zeitnah.Internationale Käufer - Bitte beachten Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren gehen zu Lasten des Käufers. Bitte erkundigen Sie sich beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sind, bevor Sie ein Gebot abgeben oder einen Kauf tätigen. 1.Hinweise (Bitte vor dem Kauf lesen.) *Wenn sich die Adresse des Käufers an einem abgelegenen Ort befindet, werden zusätzliche 25 $ benötigt. Die Spannung des ausgestellten elektronischen Geräts beträgt 100 VAC, ein japanisches Produkt. Wenn Sie die Spannung in Ihrem Land verwenden, empfehlen wir den Einsatz eines Transformators.

Product descriptionAn integrated amplifier created by pouring Sansuis technology into a simple body.*The amplifiers amplification circuit is separated from the ground circuit, and a revolutionary advanced ?-X balance circuit equipped with NM-LAPT is adopted.This circuit transmits and amplifies signals simultaneously, and has a balanced configuration that does not receive external noise or common mode distortion. The push-pull system with four amplifiers on the + and - sides of the output drives the speakers from both + and - sides under the same conditions.In addition, NM-LAPT, developed specifically for audio, lowers the impedance of the circuit and improves dynamic frequency characteristics.*A stable power supply is achieved by using the NEW ?-X balanced power supply with a closed-loop configuration packed with high-quality sound components such as custom-made electrolytic capacitors and power transformers.*Vibrations in the power supply system and signal system are effectively controlled by reinforced twin monaural construction with optimal weight balance, and vibration transmission paths such as between the volume and chassis, where all music signals pass, are Isolated mechanical feedback is introduced, and vibration damping is performed using pure copper isolation parts.*We thoroughly pursue the quality of each part, including the part through which the music signal passes directly, as well as the insulator with vibration dispersion and non-resonance design. *Equipped with a power amplifier direct that allows audio signals to be input directly to the power amplifier section.*By setting the CD player to power amplifier direct, you can back-record CDs and other sources while listening. For example, while playing the source in Normal 1, it is possible to record the source such as a CD input in Normal 2.* Equipped with a 6-unit detent volume, gold-plated input terminal, large speaker terminal, and polarity display power cord/AC outlet.?Main specificationsModel integrated amplifierEffective output (10Hz to 20kHz, both channels working simultaneously) 6?: 105W+105W 8?: 90W+90WTotal harmonic distortion rate (at effective output) 0.003% or less (8?)Frequency characteristics (1W) DC ~ 300kHz, +0 -3dBCross modulation distortion rate 0.003% or less (8?)Damping factor 150(8?)Input sensitivity/impedance (1kHz) 1V/5k?SN ratio (A network) 120dB or moreDynamic power 2?:280W 4?:220W 6?:155WTIM distortion (SAWTOOTH) below measurement limit valueSlew rate 180V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM: 2.5mV/47k? Phono MC: 300?V/100? CD, Tuner, Line, Tape/DAT1?2?3: 150mV/20k?PhonoMaximum allowable input MM(THD 0.01%):210mVMC(THD 0.1%):21mVFrequency characteristics (1W) Phono MM: 20Hz to 20000Hz ±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200kHz +0 -3dBSN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or moreTone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz)Subsonic filter 16Hz(-3dB), 6dB/octLoudness 50Hz:+4dB?10kHz:+3dBRated power consumption 250WExternal dimensions Width 430x Height 159x Depth 446mmWeight 18.0kg?The condition of the product is junk.When checking, I was able to confirm that sound was coming from each speaker terminal.There are contact defects in various parts such as knobs, and the sound cuts out when operated.No accessories.This item is a junk item. Please use it as a repair base or parts collection.For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

ArtikeltitelBeschreibungGebrauchtVersand DHL Fedex UPSInternationale Käufer - Bitte beachten Sie:????????????????????????????????.??????????????????????????????.Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren gehen zu Lasten des Käufers. Bitte erkundigen Sie sich beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sind, bevor Sie ein Gebot abgeben oder einen Kauf tätigen. Vielen Dank für Ihr Verständnis.

Item TitleDescriptionUsedShipping DHL Fedex UPSInternational Buyers - Please Note:????????????????????????????????????????????????????????????????Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.