Sansui AU-X417R - Stereo Amplifier

Service Manual guide for Sansui  (circuit diagrams, settings... - what you need to repair a device) Repair instructions in perfect and acceptable reproduction of the original   Service Manual for Repair of Items is not original but faultless and permitted reproduction from OriginalLegal notice: We are licensed as a switching service and authorized to reproduce these instructions.The business registration and approvals from the rights holders/manufacturers are available. If you have any questions or are looking for a guide that is not listed in our shop, we are always available. By all means, take me into yours favorites!Have fun and success with the repair!!!Service Manual guide for Sansui    (circuit diagrams, settings... - what you need to repair a device)   Repair instructions in perfect and acceptable reproduction of the original    Service Manual for Repair of Items is not original but faultless and permitted reproduction from Original Legal notice:   We are licensed as a switching service and authorized to reproduce these instructions. The business registration and approvals from the rights holders/manufacturers are available.   If you have any questions or are looking for a guide that is not listed in our shop, we are always available.   By all means, take me into yours favorites! Have fun and success with the repair!!!

YOU ARE BIDDING ON SANSUI 2PC AMPLIFIER AU-417 + TUNER TU-417 WITH RACK HANDLES PRO SERVICED FULLY RECAPPED AND NEW LEDs BOTH UNITS ARE IN EXCELLENT COSMETIC CONDITION LIGHTS UP NICELY WORKS PERFECT FULLY RE-CAPPEDAll electrolytic capacitors have been replaced with Elna and Nichicon Gold capacitors, DC offset and Bias have been adjusted to factory specs and all solder joints re-soldered, unit serviced to new condition SHIPPING TO USA AND CANADA $50 INTERNATIONAL BUYERS MUST EMAIL FOR SHIPPING COSTSpecifications AmplifierPower output: 65 watts per channel into 8? (stereo)Frequency response: 5Hz to 100kHzTotal harmonic distortion: 0.02%Damping factor: 60Input sensitivity: 2.5mV (MM), 150mV (line)Signal to noise ratio: 80dB (MM), 100dB (line)Channel separation: 60dB (MM), 65dB (line)Output: 150mV (line)Speaker load impedance: 8? (minimum)Dimensions: 430 x 168 x 395mmWeight: 12.2kgYear: 1980Specifications TunerType: Mono/Stereo TunerTuning Bands: FM, MWTuning Scale: AnalogueFM Tuning Range: 88 to 108 MHzMW Tuning Range: 530 to 1600 kHzSensitivity: 1.0uV (FM)Signal to Noise Ratio: 73dB (FM), 48dB (MW)Distortion: 0.09% (FM)Selectivity: 50dB (FM), 35dB (MW)Frequency response: 20Hz to 15kHz (FM)Output: 775mVDimensions: 430 x 168 x 405mmWeight: 8.3kg

!!! International bidders welcome !!! Sansui AU-X417R. Guter Allgemeinzustand. Funktioniert Keine Fernbedienung Transportsichere Verpackung Privatkauf: keine Garantie, keine Rücknahme Fragen? Bitte kontaktiert mich ! Good overall condition. In good working condition Transport safe packaging Private purchase: no warranty, no return International bidders: Please, ask about shipping costs to your place before buying !! Review: It’s rare to find plenty of features, oodles of power and a good sound at anything other than an inaccessible price. Yet Sansui has nailed this brief with its AU-X417R. There’s even a matching remote handset to duplicate the on-board volume and input selection facilities.This amp will cope with both MM and MC phono cartridges, with independent rec-out selection and A+B speaker selection to boot. Incidentally, there is an ’impedance’ switch located at the rear of the case, restricting the power available to multiple 4ohm speaker pairs.Inside, a large frame mains transformer accounts for much of the amp’s prodigious bulk, though the general standard of construction is rather messy. Quite how this jamboree of components sounds so good is something of a mystery!Sound qualityThe Sansui made a good impression from the first few bars, and built on it as the various tracks progressed. Its coherency and naturalness, the result of plenty of detail combined with a rare degree of tidiness, struck everyone on the panel and inspired comments such as ‘good positioning in soundstage’ and ‘fundamental correctness’. The only dissenting comments related to a slight brightness.It was clear within one track that this was no ordinary amp, and the second piece did nothing to harm that image. The tone and intonation of the various instruments were particularly well preserved, although once again there was slight criticism of the high frequencies, which one listener felt had a digital shimmer.The panel agreed that the Sansui AU-X417R captured better than most the mood, ambience, depth and space in the music being played. Quite a lot was made of its Imaging abilities, several comments relating to the positioning and scale of instruments being made, particularly in respect to the Mahler piece.With vinyl, the balance was the same. The sound was slightly more relaxed and detail retrieval was of a high order.

Good used Sansui AU-417 face plate.Minor nicks on edge/corner. Nice but not mint

Amplificateur SANSUI AU-417. En très bon état Testé, nettoyé Pas de grésillement Les potationmètre bon état

Ampli Sansui AU 417. Prise anglaise, adaptateur fourni .

Sansui TU-417 Stereo Tuner W/ Rack Handles Tested / Working. Tuner is in excellent cosmetic condition and works great. Shipping in the lower 48 only Payment due within 3 days of purchase

Amplificateur SANSUI AU-417. En très bon état Testé, nettoyé Pas de grésillement Les potationmètre bon état

ampli au 417 et tuner tu 417très.bon état

Amplificateur SANSUI AU-417. En très bon état Testé, nettoyé Pas de grésillement Les potationmètre bon état

Amplificateur SANSUI AU-417. En très bon état Testé, nettoyé Pas de grésillement Les potationmètre bon état

Amplificateur SANSUI AU-417. En très bon état Testé, nettoyé Pas de grésillement Les potationmètre bon état

Amplificateur intégré Sansui AU-417 Caractéristiques techniques (données constructeur):- puissance efficace: 2 x 65W par canal à 0,02% de distorsion sur 8 Ohms- bande passante 5 - 100.000 Hz à +0 dB -3 dB- déviation de la courbe RIAA (en PHONO) de 20 Hz à 20.000 Hz: +0,2 dB, -0,2 dB - rapport signal/bruit: - AUX: 100dB - PHONO: 80dB Fonctionnement:- lampli: fonctionne très bien sur les 2 canaux, jai testé toutes les entrées y compris PHONO; pas de bruits parasites, pas de craquements. - la LED marche/arrêt fonctionne.- cet amplificateur a le grand avantage dêtre logé dans le châssis de son grand frère (le AU-717) et utilise les mêmes radiateurs thermiques. De ce fait il bénéficie dune très bonne dissipation thermique particulièrement intéressante pour les utilisateurs qui envisagent de le faire fonctionner à puissance élevée. Esthétique: voir photos. Pour connaître le meilleur prix dexpédition à létranger, merci de me contacter. ATTENTION: les acheteurs situés en dehors de lUnion Européenne doivent payer eux mêmes les frais et taxes dimportation, ces frais et taxes ne sont pas compris dans le prix.