RUSSOUND R290DS Power Amplifier, Tested And Works. Power cord is a generic power cord not original to device. No remote is included. Some scratches to top and side. See pics TWO-CHANNEL DUAL SOURCE AMPLIFIER (90W) The R290DS is a two-channel, two-source, 90-watt amplifier with auto-source switching. With primary and secondary audio line inputs, loop output, selectable speaker level input, and 12 V trigger input and output, the R290DS provides the power and features necessary to support today's multiroom audio systems. Ideal for power upgrades for a specific zone, zones where a local source input is required, or for long series parallel speaker runs, the R290DS supplies the extra power needed for larger zones, while combining the flexibility of adding local sources via automatic source switching. It also includes an autosensing input that activates the amplifier upon detecting an audio signal. The amplifier returns to standby mode when the audio signal ceases. The R290DS is rated at 90 watts per channel into 8 ohms, 110 watts into 4 ohms, and is bridgeable, providing 250 watts of power into a single 8-ohm load. Each amplifier output channel incorporates robust protection circuitry for safety and reliability under extreme circumstances. Specifications: Amplifier - 2 Channels Frequency - 20 Hz to 20kHz +/-0.3 dB Response Input - 47 kilohms Impedance Input - 70 mV for 1 watt at 8 ohms Sensitivity - 680 mV for 1 watt at 8 ohms Power Output - Continuous Stereo: 90 watts per channel at 8 ohms 110 watts per channel at 4 ohms Power Requirements - Bridged Mono 250 Watts at 8 ohms Signal to noise ratio - 110 db A-weighted Total Harmonic - 0.03% THD+N from 20 Hz to 20 kHz for 90 watts into 8 ohms Voltage gain - 32 db Zone outputs - 1

Like new powerful amp

Russound R290DS Power Amp Onkyo P3160 Pre Amp Technic RS-M222 Dual Cassette Deck All are in Excellent Used Condition For Their Age Tested Works Great. Normal Scuffs and Scratches Very Minimal Looks and Sound Great See Actual Photos and Video of The 3 Items Working. No Remotes Included But Can Be Easily Obtained on eBay For Additional Cost. Very Nice. Please Allow 3 days For Handling and May be in Separate Shipments all With Tracking Numbers if Necessary I Sell and Pack and Ship a Lot of These Type Of Units and All Have Arrived Safely as Described as You Can My Feed Back From Various Buyers That Have Purchased Items From My eBay Store and as on All of My Sales Come With a 30 Day Return Policy Please Let me Know if You Have Any Problems. Thank YouRussound R290DS Power Amplifier 90 watts per channel into 8 ohms or 110 watts into 4 ohms250 watts when bridged into a single 8-ohm loadrobust protection circuitryprimary and secondary audio line inputs with automatic source switchingselectable speaker-level inputloop output12-volt trigger input and output16-7/8W x 4-1/8H x 15-1/8DOnkyo P3160 Stereo Pre Amp Frequency response: 15Hz to 30kHzTotal harmonic distortion: 0.009%Input sensitivity: 2.5mV (MM), 150mV (line)Signal to noise ratio: 83dB (MM), 95dB (line)Output: 150mV (line), 1V (Pre out), 5V (Pre out Max)Dimensions: 435 x 110 x 267mmWeight: 3.7kgTechnic RS-M222 Dual Cassette Deck Vintage 1980s dual cassette deck - one side records and plays, the other is for playback only. Or you can use it as a dubbing deck -- settings for normal speed dubbing or high speed dubbing. The deck is in fine shape - just a few scratches and some masking tape residue which in no way affects the workings of the unit - just a little cosmetic aging, thats all. Tested all functions on both decks are working as normal. The Technics RS-M222 is a stereo double cassette deck with Dolby B noise reduction, it was first sold by Technics in 1982.The main features of the Technics RS-M222 are: 2 heads, mechanical 3 digit tape counter, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven auto reverse transport.Typical front loading double cassette deck with the cassette compartment located on both sides of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.Level meters used on the RS-M222 are generic digital peak reading meters. Soft-touch controls for fast and easy transport function selection of the RS-M222. Cue and review can be used to easily and quickly locate the beginning of a passage.The Dolby-B system reduces tape hiss on tapes recorded on the RS-M222 by as much as 10 dB at the highest frequencies.For undisturbed listening a jack connector for a pair of stereo headphones

Like new powerful amp

Description Shipping Return Policy Local Pickup About Us Item Description Item Sku: J6-B-SepK44748 AS-IS, For parts only. - Tested to power on only - Power cable/adapter: Not included, unless stated otherwise - May be missing internal parts we are not aware of, review all pictures in detail. - No warranty / No returns / No exchanges / No refunds. Shipping Policies When you purchase multiple items from us, were delighted to offer a 10% shipping discount on each additional item! We make it a priority to ship your order within 2-5 business days. If youre in a hurry, simply select our expedited service at checkout, and well make sure your order is shipped within just one business day. Were delighted to announce that were now offering palletizing options for larger orders. Send us an inquiry for a shipping quote to your area. We ship with FedEx, UPS, or Canada Post, depending on your location. Got a question about an item or shipping? Please feel free to send us a message directly. Were here to help! Return Policy We follow eBays return policies, so rest assured, weve got your back! Pick Up Item Locally We are located at the following address for your convenience: 1315 73 Ave SE, Calgary, AB T2H 2X1 Hours of operation: M-F 9:00am-5:00pm. When you arrive, please let the receptionist know youre here to pick up your eBay purchase. About Us Welcome to Calgary Computer Wholesale! Were a local business specializing in computer hardware and accessories. We pride ourselves on providing quality products at competitive prices, with exceptional customer service to match. If you have any questions or need assistance, please dont hesitate to reach out. Were here to help you find the perfect computer hardware solutions for your needs. Thank you for choosing Calgary Computer Wholesale!

This amplifier was pulled from a working system. It was cleaned and tested. Everything is working as it should, but its important to note that this item is being sold as For parts or not working due to 2 issues: Binding posts on the left channel are broken off. These can be easily replaced with replacements. The Speaker Level Input switch is broken off. It doesnt seem to affect the primary line input. To be honest, these 2 issues do not diminish the amplifiers value. This Russound R290DS has potential to be restored by someone who knows what theyre doing. Dont miss out on the opportunity to own this amazing piece of audio equipment.

This amplifier was pulled from a working system. It was cleaned and tested. Everything is working as it should, but its important to note that this item is being sold as For parts or not working due to 2 issues: Binding posts on the left channel are broken off. These can be easily replaced with replacements. The Speaker Level Input switch is broken off. It doesnt seem to affect the primary line input. To be honest, these 2 issues do not diminish the amplifiers value. This Russound R290DS has potential to be restored by someone who knows what theyre doing. Dont miss out on the opportunity to own this amazing piece of audio equipment.

The R290DS is a two-channel, two-source, 90-watt amplifier with auto-source switching. With primary and secondary audio line inputs, loop output, selectable speaker level input, and 12 V trigger input and output, the R290DS provides the power and features necessary to support todays multiroom audio systems. Ideal for power upgrades for a specific zone, zones where a local source input is required, or for long series parallel speaker runs, the R290DS supplies the extra power needed for larger zones, while combining the flexibility of adding local sources via automatic source switching. It also includes an autosensing input that activates the amplifier upon detecting an audio signal. The amplifier returns to standby mode when the audio signal ceases. Item #546901Manufacturer #R290DSBrand NameRussoundCertifications & StandardsUL, CSA and CEDepth14 in.Frequency60 HzHeight4.1 in.Input Voltage110 V ACManufacturerRussound/FMP, IncModelR290DSPorts2 analog audio inProduct SeriesRWattage110 WWeight (Approximate)17.20 lbWhats IncludedR290DS Amplifier; Rack Mount Ears; Remote ControlWidth17 in.

Used in good working condition. Fully tested + 30-Days Guarantee. See photos for details. Bridgeable To Create One Channel With Substantial Power Output Dual Source Input With Auto Switching Selects Between Primary and Secondary Sources 90 watts per channel into 8 ohms or 110 watts into 4 ohms 250 watts when bridged into a single 8-ohm load Robust protection circuitry - Loop output Primary and secondary audio line inputs with automatic source switching Selectable speaker-level input 12-volt trigger input and output Item Dimensions (LxWxH): 20.5 x 23.6 x 10.6 inches AC Power 110v/240V Selectable Free shipping with an USA address only. No P.O Box. No International Shipping. ________ The R290DS is a great choice for a power upgrade in a specific zone of your multi-room system or for any zone in which a music source input is desired. If you only want to connect one or two music sources (such as a computer, a plug-and-play satellite radio, or a docked iPod®), this a much more user-friendly option than a receiver with more inputs and features than youll ever use. Designate one music component as your primary source, and it will activate the amplifier when it sends out an audio signal. The amplifier returns to standby mode when the audio signal ceases. Your secondary audio source takes over automatically when theres no signal coming from the primary source. Theres no need to manually switch inputs. With loop output, selectable speaker-level input, and 12-volt trigger input and output, the R290DS provides the power and flexibility to support a wide range of multi-room system configurations.

The R290DS is a two-channel, two-source, 90-watt amplifier with auto-source switching. With primary and secondary audio line inputs, loop output, selectable speaker level input, and 12 V trigger input and output, the R290DS provides the power and features necessary to support todays multiroom audio systems. Ideal for power upgrades for a specific zone, zones where a local source input is required, or for long series parallel speaker runs, the R290DS supplies the extra power needed for larger zones, while combining the flexibility of adding local sources via automatic source switching. It also includes an autosensing input that activates the amplifier upon detecting an audio signal. The amplifier returns to standby mode when the audio signal ceases. Item #546901Manufacturer #R290DSBrand NameRussoundCertifications & StandardsUL, CSA and CEDepth14 in.Frequency60 HzHeight4.1 in.Input Voltage110 V ACManufacturerRussound/FMP, IncModelR290DSPorts2 analog audio inProduct SeriesRWattage110 WWeight (Approximate)17.20 lbWhats IncludedR290DS Amplifier; Rack Mount Ears; Remote ControlWidth17 in.

The R290DS is a two-channel, two-source, 90-watt amplifier with auto-source switching. With primary and secondary audio line inputs, loop output, selectable speaker level input, and 12 V trigger input and output, the R290DS provides the power and features necessary to support todays multiroom audio systems. Ideal for power upgrades for a specific zone, zones where a local source input is required, or for long series parallel speaker runs, the R290DS supplies the extra power needed for larger zones, while combining the flexibility of adding local sources via automatic source switching. It also includes an autosensing input that activates the amplifier upon detecting an audio signal. The amplifier returns to standby mode when the audio signal ceases. Item #546901Manufacturer #R290DSBrand NameRussoundCertifications & StandardsUL, CSA and CEDepth14 in.Frequency60 HzHeight4.1 in.Input Voltage110 V ACManufacturerRussound/FMP, IncModelR290DSPorts2 analog audio inProduct SeriesRWattage110 WWeight (Approximate)17.20 lbWhats IncludedR290DS Amplifier; Rack Mount Ears; Remote ControlWidth17 in.

The R290DS is a two-channel, two-source, 90-watt amplifier with auto-source switching. With primary and secondary audio line inputs, loop output, selectable speaker level input, and 12 V trigger input and output, the R290DS provides the power and features necessary to support todays multiroom audio systems. Ideal for power upgrades for a specific zone, zones where a local source input is required, or for long series parallel speaker runs, the R290DS supplies the extra power needed for larger zones, while combining the flexibility of adding local sources via automatic source switching. It also includes an autosensing input that activates the amplifier upon detecting an audio signal. The amplifier returns to standby mode when the audio signal ceases. Item #546901Manufacturer #R290DSBrand NameRussoundCertifications & StandardsUL, CSA and CEDepth14 in.Frequency60 HzHeight4.1 in.Input Voltage110 V ACManufacturerRussound/FMP, IncModelR290DSPorts2 analog audio inProduct SeriesRWattage110 WWeight (Approximate)17.20 lbWhats IncludedR290DS Amplifier; Rack Mount Ears; Remote ControlWidth17 in.

The R290DS is a two-channel, two-source, 90-watt amplifier with auto-source switching. With primary and secondary audio line inputs, loop output, selectable speaker level input, and 12 V trigger input and output, the R290DS provides the power and features necessary to support todays multiroom audio systems. Ideal for power upgrades for a specific zone, zones where a local source input is required, or for long series parallel speaker runs, the R290DS supplies the extra power needed for larger zones, while combining the flexibility of adding local sources via automatic source switching. It also includes an autosensing input that activates the amplifier upon detecting an audio signal. The amplifier returns to standby mode when the audio signal ceases. Item #546901Manufacturer #R290DSBrand NameRussoundCertifications & StandardsUL, CSA and CEDepth14 in.Frequency60 HzHeight4.1 in.Input Voltage110 V ACManufacturerRussound/FMP, IncModelR290DSPorts2 analog audio inProduct SeriesRWattage110 WWeight (Approximate)17.20 lbWhats IncludedR290DS Amplifier; Rack Mount Ears; Remote ControlWidth17 in.

The R290DS is a two-channel, two-source, 90-watt amplifier with auto-source switching. With primary and secondary audio line inputs, loop output, selectable speaker level input, and 12 V trigger input and output, the R290DS provides the power and features necessary to support todays multiroom audio systems. Ideal for power upgrades for a specific zone, zones where a local source input is required, or for long series parallel speaker runs, the R290DS supplies the extra power needed for larger zones, while combining the flexibility of adding local sources via automatic source switching. It also includes an autosensing input that activates the amplifier upon detecting an audio signal. The amplifier returns to standby mode when the audio signal ceases. Item #546901Manufacturer #R290DSBrand NameRussoundCertifications & StandardsUL, CSA and CEDepth14 in.Frequency60 HzHeight4.1 in.Input Voltage110 V ACManufacturerRussound/FMP, IncModelR290DSPorts2 analog audio inProduct SeriesRWattage110 WWeight (Approximate)17.20 lbWhats IncludedR290DS Amplifier; Rack Mount Ears; Remote ControlWidth17 in.

The R290DS is a two-channel, two-source, 90-watt amplifier with auto-source switching. With primary and secondary audio line inputs, loop output, selectable speaker level input, and 12 V trigger input and output, the R290DS provides the power and features necessary to support todays multiroom audio systems. Ideal for power upgrades for a specific zone, zones where a local source input is required, or for long series parallel speaker runs, the R290DS supplies the extra power needed for larger zones, while combining the flexibility of adding local sources via automatic source switching. It also includes an autosensing input that activates the amplifier upon detecting an audio signal. The amplifier returns to standby mode when the audio signal ceases. Item #546901Manufacturer #R290DSBrand NameRussoundCertifications & StandardsUL, CSA and CEDepth14 in.Frequency60 HzHeight4.1 in.Input Voltage110 V ACManufacturerRussound/FMP, IncModelR290DSPorts2 analog audio inProduct SeriesRWattage110 WWeight (Approximate)17.20 lbWhats IncludedR290DS Amplifier; Rack Mount Ears; Remote ControlWidth17 in.

Russound Power Amplifier R290DS Used, but is still in very good cosmetic and working condition. Tested and works great. All of the functions/features work excellent. Still in good overall cosmetic condition with a few minor marks and scratches. Doesnt come with power cable, but has been tested and works perfect.

The R290DS is a two-channel, two-source, 90-watt amplifier with auto-source switching. With primary and secondary audio line inputs, loop output, selectable speaker level input, and 12 V trigger input and output, the R290DS provides the power and features necessary to support todays multiroom audio systems. Ideal for power upgrades for a specific zone, zones where a local source input is required, or for long series parallel speaker runs, the R290DS supplies the extra power needed for larger zones, while combining the flexibility of adding local sources via automatic source switching. It also includes an autosensing input that activates the amplifier upon detecting an audio signal. The amplifier returns to standby mode when the audio signal ceases. Item #546901Manufacturer #R290DSBrand NameRussoundCertifications & StandardsUL, CSA and CEDepth14 in.Frequency60 HzHeight4.1 in.Input Voltage110 V ACManufacturerRussound/FMP, IncModelR290DSPorts2 analog audio inProduct SeriesRWattage110 WWeight (Approximate)17.20 lbWhats IncludedR290DS Amplifier; Rack Mount Ears; Remote ControlWidth17 in.

The R290DS is a two-channel, two-source, 90-watt amplifier with auto-source switching. With primary and secondary audio line inputs, loop output, selectable speaker level input, and 12 V trigger input and output, the R290DS provides the power and features necessary to support todays multiroom audio systems. Ideal for power upgrades for a specific zone, zones where a local source input is required, or for long series parallel speaker runs, the R290DS supplies the extra power needed for larger zones, while combining the flexibility of adding local sources via automatic source switching. It also includes an autosensing input that activates the amplifier upon detecting an audio signal. The amplifier returns to standby mode when the audio signal ceases. Item #546901Manufacturer #R290DSBrand NameRussoundCertifications & StandardsUL, CSA and CEDepth14 in.Frequency60 HzHeight4.1 in.Input Voltage110 V ACManufacturerRussound/FMP, IncModelR290DSPorts2 analog audio inProduct SeriesRWattage110 WWeight (Approximate)17.20 lbWhats IncludedR290DS Amplifier; Rack Mount Ears; Remote ControlWidth17 in.