I purchased this a few years back. Somehow as a result from a move, I lost the power supply! Still works I just need to fund a trip so I’m parting ways. Priced to sell (and for the inconvenience of having to purchase a power supply which are sold online). Comes with box as well as psu adapters for other countries.

Lightly used in a smoke free home for a few months. Cosmetically and functionally perfect. MAXIMUM INPUT LEVELS “A” XLR I/P: +22.8 dBu @ 1 kHz “B” RCA I/P: +14.7 dBu @ 1 kHz, “C” 3.5mm I/P: +3.3 dBu @ 1 kHz OUTPUT POWER As measured with typical headphones, Z=44 Ohm: 3.617 VAC RMS @ 1 kHz = 300mW RMS. 16 Ohm typical Load: 1.933 VAC RMS @ 1 kHz = 230mW RMS 150 Ohm typical Load: 5.108 VAC RMS @ 1 kHz = 175mW RMS OUTPUT IMPEDANCE .08 Ohm @ 1 kHz, 16-150 Ohm load, 0 dBu input FREQUENCY RESPONSE +/- .2 dB from 10 Hz to 120 kHz NOISE Measured with typical headphones, Z = 44 Ohm, BW 22 Hz - 22 kHz. “A” XLR Input: -101.9 dBV, “B” RCA Input: -100.9 dBV “C” 3.5mm Input: -88.8 dBV DIMENSIONS 6.5” wide x 4.6” deep and 1.9” tall POWER SUPPLY REQUIREMENTS 24VDC @ 0.25Amp (6 watt) minimum. Use with supplied power adapter, as this has been carefully selected for best output power and noise performance. May be used with a properly configured 24V battery as well.

Lightly used in a smoke free home for a few months. Cosmetically and functionally perfect. MAXIMUM INPUT LEVELS “A” XLR I/P: +22.8 dBu @ 1 kHz “B” RCA I/P: +14.7 dBu @ 1 kHz, “C” 3.5mm I/P: +3.3 dBu @ 1 kHz OUTPUT POWER As measured with typical headphones, Z=44 Ohm: 3.617 VAC RMS @ 1 kHz = 300mW RMS. 16 Ohm typical Load: 1.933 VAC RMS @ 1 kHz = 230mW RMS 150 Ohm typical Load: 5.108 VAC RMS @ 1 kHz = 175mW RMS OUTPUT IMPEDANCE .08 Ohm @ 1 kHz, 16-150 Ohm load, 0 dBu input FREQUENCY RESPONSE +/- .2 dB from 10 Hz to 120 kHz NOISE Measured with typical headphones, Z = 44 Ohm, BW 22 Hz - 22 kHz. “A” XLR Input: -101.9 dBV, “B” RCA Input: -100.9 dBV “C” 3.5mm Input: -88.8 dBV DIMENSIONS 6.5” wide x 4.6” deep and 1.9” tall POWER SUPPLY REQUIREMENTS 24VDC @ 0.25Amp (6 watt) minimum. Use with supplied power adapter, as this has been carefully selected for best output power and noise performance. May be used with a properly configured 24V battery as well.

PREOWNED - $700 LIST! - FULLY TESTED - INCLUDES ORIGINAL BOX, POWER SUPPLY Whether you’re tracking, mixing, or just listening tomusic, your headphone amplifier is as important to the final sound quality asyour headphones – yet the world is full of headphone amps with compromisedsonics, headroom, and power. To address these shortcomings, Rupert and his teamat Rupert Neve Designs have developed the RNHP.Based on the headphone output circuit in the 5060Centerpiece Desktop Mixer, the RNHP is a dedicated 24V reference-qualityheadphone amplifier with specifically-calibrated +4dBu balanced line,unbalanced RCA and 3.5mm (1/8”) inputs, housed in a rugged VESA-mountable steelchassis. With effortless, wide-open sonic performance and the ability to driveany pair of headphones without compromise, the RNHP allows you to perform, mixand enjoy your music with a new level of clarity.Dedicated vs Integrated AmplifiersFor much equipment, the headphone output is an afterthought.Most products with integrated headphone amps have large feature sets, smallfootprints, and relatively low price points. This leads to compromised powerand audio quality of the headphone amplifier itself, which can lead to a numberof issues in real world usage such as low headroom, unreliable performance, anda lack of focus. The RNHP was made to accomplish one simple purpose: makingany headphones sound their best. As a dedicated design, the RNHP is tailored todeliver extremely high quality, powerful amplification, with precisecalibration for any source input. This exceptional level of quality can bethe difference that inspires an artist to give their best performance, lets anengineer make better choices in mic and placement, gives a mix engineerreliable translation of EQ and dynamics adjustments, or lets a music listener appreciatethe full depth and detail of a recording.Specially-Calibrated Inputs For All of Your DevicesIn addition to being able to drive a wide variety ofheadphones without sacrificing performance, the RNHP is also capable ofreceiving a wide array of signals with its 3 inputs, calibrated for optimumlevel and impedance. Check the application notes for how the RNHP can beutilized for different purposes.Here are some common device examples:Input A: +4dBu Line (XLR or TRS) DevicesStudio Audio Interfaces (Line or Monitor Out)Headphone Mixers (Line Output or HP Out)Mixing Consoles (Line, Aux or Monitor Out)Professional Turntable Mixers (Line or Monitor)Professional Stereo Digital to Analogue ConverterProfessional Cameras?StudioMonitor ControllersInput B: RCA DevicesCD / DVD PlayersStereo Tuners?PreamplifiedTurntablesProsumer Recording Devices / CamerasInput C: 3.5mm (1/8”) Stereo DevicesMobile PhonesPortable Music PlayersComputersDSLR Cameras?HandheldRecording DevicesAny 3.5mm headphone outputVESA-Mountable DesignThe RNHP is designed for mounting with any VESA 100compatible mount. These may include pole mounts, wall mounts, table mounts, orarticulating arm mounts. These mounts can help to ensure the RNHP is always inthe perfect position.Multiple-Line FeedIn some situations where you only have one set of outputsbut need to simultaneously feed the RNHP and another device such as speakers, asecond headphone amplifier, or a 2-track recorder, we recommend using splittercables from the Left and Right line outputs to feed both devices from the samestereo pair.Maximum Input Levels“A” XLR I/P: +22.8 dBu @1kHz“B” RCA I/P: +14.7dBu @1kHz,“C” 3.5mm I/P: +3.3dBu @1kHzOutput Power:As measured with typical headphones, Z=44 ?: 3.617 VAC RMS@1kHz = 300mW RMS16 ? typical Load: 1.933 VAC RMS @1kHz = 230mW RMS150 ? typical Load: 5.108 VAC RMS @1kHz = 175mW RMSOutput Impedance.08 ? @ 1KHz, 16-150 ? load, 0dBu inputFrequency Response+/- .2dB from 10Hz to 120KHzNoiseMeasured with typical headphones, Z=44 ?, BW 22Hz – 22kHz“A” XLR Input: -101.9dBV,“B” RCA Input: -100.9dBV“C” 3.5mm Input: -88.8dBVDimensions6.5” wide x 4.6” deep and 1.9” tallPower Supply Requirements24VDC @ 0.25Amp (6 watt) minimum. Use withsupplied power adapter, as this has been carefully selected for best outputpower and noise performance. Hi-Fi Heaven1549 Sixth StGreen Bay, WI 54304Contact us with your exact shipping address for accurate shipping cost.Larger speakers and items over 150lbs are strapped to a pallet and shipped via Freight including liftgate and residential delivery.We accept Pay-Pal or credit cards by contacting our store.We offer a 4% discount with payment by Zelle or check.Defective items are exchanged within 14 days from delivery.After 14 days, the manufacturers warranty will apply. Contact us for any assistance in obtaining warranty assistance.Defective item returns must be in the manufacturers original packaging, in like-new condition, including all packaging materials, shipped as-received and fully insured.Items are guaranteed to be as described.If a refund is desired, we will refund your full purchase price minus a 20% restocking fee.The item must be as received & unopened. Buyer pays return shipping costs.If you are having a problem, Please call before making a return claim on eBay.We do not offer free auditions or trials of merchandise.Returns will only be accepted for items that are truly defective.We use methods to detect product tampering.We will seek legal action against any individual or entity attempting to defraud us.Hi-Fi Heaven1549 Sixth StGreen Bay, WI 54304

Normal 0 21 false false false BG X-NONE X-NONE For sale is a Rupert Neve Designs Fidelice Precision DAC / Headphone Amplifier / Preamp. Normal 0 21 false false false BG X-NONE X-NONE The Fidelice Precision Digital-to-Analog Converter is a full feature DAC built around pure Class-A topologies, with a built in Preamplifier and a separate built in Headphone Amplifier - a very flexible and connectivity-rich all-in-one unit that has proper analog inputs that are kept in the analog domain from end-to-end. Visually, the device is an absolute work of art, with a solid aluminium casing that has a triangular mahogany inlay in the top, sporting Rupert Neves signature cut into the surface. The Fidelice DAC is for those who not only want uncompromising performance and a host of features, but who also want to add a dash of studio greatness when it comes to listening at home. The unit Im selling is in excellent condition. Comes boxed, including a power cable and a user manual. From a pet free, non smoking home. Will dispatch it device tracked and fully insured either the same, or the next working day. Economy (via GLS) and Standard shipping (via DHL) usually takes about a week, while Express delivery (via UPS air) arrives in 2-3 business days (please dont pay attention to eBay estimates - they are assigned automatically and theres no way to edit them). In some cases, standard or even air service might actually be cheaper than the economy one, so do pay attention at checkout. Condition and serial number are documented and recorded, so scammers - dont waste your time here. Please purchase only if you have 10+ feedback, or contact me prior placing your order. All of my perfect eBay feedback comes from selling expensive headphone gear, so buy with absolute confidence!Feel free to check my other listings as well. And last but not least, thanks for looking!

Normal 0 21 false false false BG X-NONE X-NONE For sale is a Rupert Neve Designs Fidelice Precision DAC / Headphone Amplifier / Preamp. Normal 0 21 false false false BG X-NONE X-NONE The Fidelice Precision Digital-to-Analog Converter is a full feature DAC built around pure Class-A topologies, with a built in Preamplifier and a separate built in Headphone Amplifier - a very flexible and connectivity-rich all-in-one unit that has proper analog inputs that are kept in the analog domain from end-to-end. Visually, the device is an absolute work of art, with a solid aluminium casing that has a triangular mahogany inlay in the top, sporting Rupert Neves signature cut into the surface. The Fidelice DAC is for those who not only want uncompromising performance and a host of features, but who also want to add a dash of studio greatness when it comes to listening at home. The unit Im selling is in excellent condition. Comes boxed, including a power cable and a user manual. From a pet free, non smoking home. Will dispatch it device tracked and fully insured either the same, or the next working day. Economy (via GLS) and Standard shipping (via DHL) usually takes about a week, while Express delivery (via UPS air) arrives in 2-3 business days (please dont pay attention to eBay estimates - they are assigned automatically and theres no way to edit them). In some cases, standard or even air service might actually be cheaper than the economy one, so do pay attention at checkout. Condition and serial number are documented and recorded, so scammers - dont waste your time here. Please purchase only if you have 10+ feedback, or contact me prior placing your order. All of my perfect eBay feedback comes from selling expensive headphone gear, so buy with absolute confidence!Feel free to check my other listings as well. And last but not least, thanks for looking!

Hello, here is a Rupert Neve Designs RNHP Precision Headphone Amplifier in mint shape. I never actually used this, so it is essentially new. I have no idea where the box went, but I do have the manual and power adapters. Rupert Neve Designs makes some of the best pro audio gear on the market. Thanks for looking.

Rupert Neve Designs RNHP Precision Headphone Amplifier Used in perfect condition, includes headphone amp and original power cord ( no box or manual ) Will be shipped safely in bubble wrap. US shipping and PayPal only

Rupert Neve Designs RNHP Headphone Amp with power supply, manual and box in excellent condition. Rupert Neve Designs RNHP Precision Headphone AmplifierProduct SKU: 52869Voltage: 100-240V# of Owners: 1Service History: NoneTobacco Exposure: No Cosmetic Description: Excellent condition with no notable blemishes. What is Included: Amplifier, Power adapter, Factory packagingOther Notes: Overall, the Rupert Neve Designs RNHP Precision Headphone Amplifier is a great option for those looking for a clean, thick, stationary amp that has lots of good power! It won’t be great for super power hungry headphones, but it will be great for most cans. At this price point, there really isn’t anything with this small of a footprint that gives this much clean power. - Major Hi-FiSPECIFICATIONS:OUTPUT POWERAs measured with typical headphones, Z=44 Ohm: 3.617 VAC RMS @ 1 kHz = 300mW RMS.16 Ohm typical Load: 1.933 VAC RMS @ 1 kHz = 230mW RMS150 Ohm typical Load: 5.108 VAC RMS @ 1 kHz = 175mW RMSOUTPUT IMPEDANCE.08 Ohm @ 1 kHz, 16-150 Ohm load, 0 dBu inputFREQUENCY RESPONSE+/- .2 dB from 10 Hz to 120 kHzNOISEMeasured with typical headphones, Z = 44 Ohm, BW 22 Hz - 22 kHz.“A” XLR Input: -101.9 dBV,“B” RCA Input: -100.9 dBV“C” 3.5mm Input: -88.8 dBVDIMENSIONS6.5” wide x 4.6” deep and 1.9” tallPOWER SUPPLY REQUIREMENTS24VDC @ 0.25Amp (6 watt) minimum. Use with supplied power adapter, as this has been carefully selected for best output power and noise performance. May be used with a properly configured 24V battery as well.3 SPECIALLY CALIBRATED INPUTS:A: Professional Line InputCalibrated +4dBu line input. The combo jack accepts either XLR or TRS inputs from balanced professional devices.B: RCA InputThe unbalanced RCA input is calibrated for -10dBV signals. The RCA jack is commonly used with home stereo devices or Prosumer equipment.C: 3.5mm InputStereo 3.5mm input specifically calibrated to work with mobile devices like phones, computers and digital cameras.

Experience high-quality audio with the Rupert Neve Designs RNHP Precision Headphone Amplifier. Designed to deliver crystal-clear audio, this amplifier is perfect for amplifying your headphones. With its USB audio inputs and high-end components, it provides an unparalleled listening experience. It is perfect for music lovers who demand nothing but the best, and with its sleek design, it will fit seamlessly into any audio setup. Whether youre a professional sound engineer or an audiophile, the RNHP Precision Headphone Amplifier is a must-have for your collection. I used this product a few times and have the original packaging.

Verkaufe 1 Kopfhörerverstärker Rupert Neve Designs RNHP / Top-Zustand / OVP / Manual;Gerät stammt aus einem tierlosen Nichtraucherhaushalt und wurde pfleglich behandelt / Erstkauf 04.2023;OVP ist vorhanden, ein transportsicherer Versand ist ohne Probleme möglich,Versandkosten innerhalb BRD betragen 10,-- EUR zu Lasten des Käufers; Alle von mir bei eBay eingestellten Artikel sind nach bestem Wissen & Gewissen gesichtet und beschrieben worden. Die von mir erkannten Mängel werden in der Artikelbeschreibung benannt. Jedoch erheben sie keinen Anspruch auf Vollständigkeit, die sich gerade bei älteren Artikeln schon aus der Sache heraus ergeben können. Die eingestellten Bilder sind vom Original erstellt worden. Es ist nichts fototechnisch entstellt oder verändert worden. Ich gewähre 12 Monate Gewährleistung. Inzahlungnahmen sind möglich. Die MwSt ist nicht ausweisbar (§25 UStG Differenzbesteuerung) Bei weiteren Fragen, einfach Kontakt aufnehmen. Ich bin Fachhändler für diverse Hifi Produkte.

Rupert Neve Designs Headphone amplifier RNHP XLR RCA 3.5mm input terminal. Like new in very good conditions, barely used.

Hersteller: Rupert Neve DesignsDesign: Rupert Neve Designs, U.S.A.Gewicht: 5,0 kgBxHxT: 40 cm x 9 cm x 26,5 cmDer neue digitale Standard von Rupert Neve, dem Meister der Analogtechnik, und das neue Herzstück Ihres gesamten Audio-Systems.Das Flaggschiff der Fidelice-Serie von Rupert Neve Designs ist zweifellos der Precision Digital-Analog-Wandler. Der hochwertige AKM Wandlerchip ist in eine Schaltung eingebunden, die kompromisslos dem Ziel besten Klangs folgt und ein unvergleichliches Hörerlebnis ermöglicht. Dabei arbeitet das System mit PCM-Abtastraten bis zu 384 kHz bei 32 Bit oder mit DSD-Daten bis 22,4 MHz über USB.Mit mehr als fünf Jahrzehnten Erfahrung in der Produktion professioneller Audiotechnik für die besten Studios und Konzertsäle der Welt wird Rupert Neve von den Toningenieuren und Produzenten der Welt als Nummer Eins für hochwertigste Audiotechnik verehrt. Diese langjährige Erfahrung von Rupert Neve findet ihre Anwendung in der völlig neu entwickelten audiophilen Produktserie Fidelice. Das Flaggschiff der Fidelice Serie von Rupert Neve Designs ist zweifellos der Precision digital-analog-Wandler. Ganz gleich, ob Sie Ihre Musik über einen der drei dedizierten Kopfhörerausgänge geniesen oder ihn als vollständig analogen Vorverstärker für symmetische oder unsymmetrische Audiosignale über die berühmten handgefertigten Signalübertrager von Rupert Neve betreiben: Der Precision DAC ist die neue Schaltzentrale in Studioqualität für Ihr audiophiles HiFi-System. Großartiger Klang beginnt und endet als analoges Signal In einer professionellen Studioumgebung ist die Qualität des analogen Signals für das spätere Hörerlebnis von größter Bedeutung, und die analogen Schaltungsdesigns von Rupert Neve sind weltberühmt für ihre Musikalität und präzise Detailtreue. Der Precision digital-analog-Wandler basiert auf Class-A-Hochspannungstechnologienfür eine extrem große Bandbreite und einen außergewöhnlichen Dynamikbereich. Die Verwendung von handgefertigten Signalübertragern auf Basis des klassischen Schaltungsdesigns von Rupert Neve garantiert höchste Signaltreue für die symmetrischen XLR-Ein- und Ausgängen des Digital-Analog-Wandlers. Dieses technische Designprinzip erlaubt die perfekte Wiedergabe der Klangbühne des Künstlers aus der Studioumgebung über den Precision digital-analog-Wandler direkt und unverfälscht in Ihre audiophile Heimumgebung und ermöglicht so den reinen und entspanntem Musikgenus. Der neue Standard für digitale Präzision Der Precision-digital-analog-Wandler wird Ihnen jede noch so kleine Nuance in Ihrer Musiksammlung näher bringen. Der hochwertige AKM Wandlerchip ist in eine Schaltung eingebunden, die kompromisslos dem Ziel besten Klangs folgt und ein unvergleichliches Hörerlebnis ermöglicht. Dabei arbeitet das System mit PCM-Abtastraten bis zu 384 kHz bei 32 Bit oder mit DSD-Daten bis 22,4 MHz über USB. Doch der Precision DAC ist mehr als „nur“ ein Wandler: Durch seine Vielzahl analoger und digitaler Anschlüsse eignet er sich hervorragend als Schaltzentrale für die klangstarke Unterhaltung zuhause. Neben USB sowie koaxialem und optischem S/PDIF ermöglichen jeweils ein symmetrischer und unsymmetrischer analoger Eingang sogar die Nutzung als reinen Vorverstärker, bevor das Signal symmetrisch oder unsymmetrisch wieder ausgegeben wird. Der Precision DAC bietet die Möglichkeit, den Klang mittels verschiedener Filtercharakteristika an die jeweiligen Hörgewohnheiten anzupassen. Der Referenz-Kopfhörerverstärker Als Kopfhörer-Verstärker betreibt der Precision DAC symmetrische Modelle per Klinkenanschluss oder unsymmetrische Modelle per 4-Pol-XLR oder Pentaconn. Der Kopfhörerverstärker verfügt außerdem über einen High-Gain-Schalter, um auch leistungshungrige Kopfhörer zu betreiben - das ist reiner Kopfhörerklang vom Feinsten. Die technischen Daten Während Hörtests nur einen subjektiven Eindruck der atemberaubenden Klangqualität vermitteln, liefert der Precision analog-digital-Wandler auch objektiv wirklich erstklassige technische Spezifikationen. Vom unsymmetrischen Eingang bis zum unsymmetrischen Ausgang liegt der THD+N @ 1kHz bei verschwindend niedrigen 0,0003%, mit einem Rauschen von -109dBV (22 Hz - 22 kHz) und einem Frequenzgang von besser als +/- 0,1dB bei 5 Hz bis 112 kHz. Vom symmetrischen Eingang des Präzisions-DACs bis zum trafosymmetrischen Ausgang bleibt THD+N @ 1kHz besser als 0,0005%, mit einem Rauschen von -101,2dBV (22 Hz - 22 kHz). FEATURES & TECHNISCHE DATEN Anschlüsse Analog Inputs: XLR Balanced, RCA unbalanced (+4 /-10dB operating levels switchable on the rear panel) Digital Inputs: Coax S/PDIF, Optical S/PDIF, USB (Mac / PC / iOS / Android) Analog Outputs: XLR balanced (fixed or variable), RCA unbalanced (fixed or variable) Headphone Outputs: TRS unbalanced, 4-pin XLR balanced, Pentaconn balanced Firmware Update: Micro USB Balanced XLR Input to Balanced XLR Output (FIXED Volume) Source Z = 40 ? Balanced with 30 ft Output XLR Input Impedance: 10 k? Output Impedance: 40 ? Maximum Input Level (+4dBu Selected): +23.5 dBu Maximum Output Level: +21.3 dBV Noise @ FIXED Volume (10 Hz - 22 kHz BW): -101.2 dBV typical Frequency Response (5 Hz to 116 kHz): +/- 0.1 dB typical THD+N (@1 kHz): 0.0005% typical (10 Hz to 22 kHz) Unbalanced RCA Input to Unbalanced RCA Output (2V RMS Redbook) Source Z = 470 ? Unbalanced Input Impedance: 10 k? Output Impedance: 33 ? Maximum Input Level: +19.2 dBV Maximum Output Level: +19.2 dBV Noise @ FIXED Volume (10 Hz - 22 kHz BW): -109 dBV typical Frequency Response (5 Hz to 112 kHz): +/- 0.1 dB typical THD+N (@1 kHz): 0.0003% typical (10 Hz to 22 kHz) Balanced Input to Unbalanced Headphone Output Source Z = 40 ? Balanced Input Impedance: 10 k? Output Impedance: 0.01 ? Maximum Output Power: 1W into 16 ? Noise @ Max Volume (10 Hz - 22 kHz BW): -98.2 dBV typical Frequency Response (5 Hz to 200 kHz): +/- 0.2 dB typical THD+N (1W into 36 ? Load @1 kHz): 0.003% typical (10 Hz to 22 kHz) THD+N (1W into 16 ? Minimum Load @ 1 kHz): 0.006% typical (10 Hz to 22 kHz) Digitaler Signalpfad – Spezifikationen Coaxial S/PDIF Input to Balanced XLR Output (FIXED Volume, 192 kHz SR) Noise (10 Hz - 22 kHz BW): -96.2 dBV typical Frequency Response (5 Hz to 23 kHz): +/- 0.1 dB typical Passband (0.5 Hz to 90 kHz): -3dB typical THD+N (@1 kHz): 0.0004% typical (10 Hz to 22 kHz) Coaxial S/PDIF Input to Balanced Headphone Output (192 kHz SR) Output Impedance: 0.02 ? Maximum Output Power: 1W into 16 ? Noise @ Max Volume (10 Hz - 22 kHz BW): -89.2 dBV typical Frequency Response (5 Hz to 20 kHz): +/- 0.1 dB typical Passband (0.5 Hz to 90 kHz): -3dB typical THD+N (1W into 16 ? Minimum Load @1 kHz): 0.008% typical (10 Hz to 22 kHz) Coaxial S/PDIF Input to Unbalanced RCA Output (FIXED Volume, 192 kHz SR) Noise (10 Hz - 22 kHz BW): -107 dBV typical Frequency Response (5 Hz to 20 kHz): +/- 0.1 dB typical Passband (0.5 Hz to 90 kHz): -3dB typical THD+N (@1 kHz): 0.0004% typical (10 Hz to 22 kHz) Coaxial S/PDIF Input to Unbalanced Headphone Output (192 kHz SR) Output Impedance: 0.01 ? Maximum Output Power: 1W into 16 ? Noise @ Max Volume (10 Hz - 22 kHz BW): -95.2 dBV typical Frequency Response (5 Hz to 20 kHz): +/- 0.1 dB typical Passband (0.5 Hz to 90 kHz): -3dB typical THD+N (1W into 16 ? Minimum Load @1 kHz): 0.006% typical (10 Hz to 22 kHz) Netzanschluss Operating Mains Voltage: 100-240VAC, 50/60 Hz AC Power Consumption: 45W Max

The worlds largest online retailer of pre-owned audio Product DescriptionWho we areWhat we doOur ProcessOur Policies Rupert Neve Designs RNHP Precision Headphone Amplifier Product SKU: 51531 Voltage: 100-240V # of Owners: 1 Service History: None Serial Number: RNHP-02386 Age: 4 Years Tobacco Exposure: No MSRP: $549 Cosmetic Description: Excellent condition with no notable blemishes.  What is Included: Headphone Amplifier, Power adapter, Factory packaging Other Notes: Overall, the Rupert Neve Designs RNHP Precision Headphone Amplifier is a great option for those looking for a clean, thick, stationary amp that has lots of good power! It won’t be great for super power hungry headphones, but it will be great for most cans. At this price point, there really isn’t anything with this small of a footprint that gives this much clean power. - Major Hi-Fi Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Shipping: Cost to ship this item within the contiguous United States is a flat rate of $19- including packaging and insurance. For all other locations including Hawaii, Puerto Rico and Alaska, please request a quote prior to purchase. Items with factory packaging will be double boxed. When factory packaging not available re-usable shipping box with custom injected-foam mold will be used. (for all items over 10 lbs). Note that all items valued over $750 will require a signature upon delivery. Your online source for the best value in new and used audio gear. Visit us online to Buy / Sell / Trade / Consign The Music Room is the largest online retailer of pre-owned HiFi equipment in the world. Headquartered in beautiful Boulder Colorado, The Music Room is a team of 17 strong (and growing) music lovers - all dedicated to one singular mission: delivering the very best online shopping experience in the audio industry - period. We specialize in well-cared for, previously used gear because that is what we are passionate about. We feel that there is nothing more fulfilling than creating a high-performance system on a budget with carefully selected used components, speakers and cables. Our program is safe, secure, fast, fair, hassle-free and highly effective. Visit us online to Buy / Sell / Trade / Consign Buy: Are you looking to get a fair price for your used home audio equipment without all the hassles, headaches, risks and fees? We will appraise your equipment and make you a quick, easy, fair cash offer. Just fill out our “get a quote” form on our homepage to start the process. Sell: We sell in multiple online venues with many (but not all) of our products available in our eBay store. Everything is quality-assured and backed by our best-in-class, satisfaction-guaranteed return policy. Trade: Make your budget go further with a generous trade-in allowance. Let us know what you have available, and we’ll get you the best possible trade-in allowance. We can even assist with shipping & logistics from anywhere in the USA. Just fill out our “get a quote” form on our homepage to start the process. Consign: We offer a hassle-free way for individuals and businesses to liquidate used gear. We’ll handle every step of the process from shipping to appraisals, customer service, fulfillment, and returns: Industry-low rates with no hidden fees Leverage our world-class reputation and get exposure in multiple sales venues - putting your product in front of over 570k monthly shoppers. Our program is Safe, Secure, Fast, Fair, Hassle-Free and Highly Effective. With 100% feedback ratings in every venue in which we sell, you can rest assured that we’ve got your back. Visit us online to Buy / Sell / Trade / Consign Quality Assurance: We offer 15-20 new product listings for sale daily. Each product undergoes an extremely rigorous quality-assurance and listening session by one of our qualified technicians. We understand that buying used audio equipment can be rife with uncertainty and unexpected headaches. Our quality assurance program is informed by a knowledge-base built through delivering over 30,000 used audio products to satisfied customers. We promise to deliver your product in good working order - exactly as described 100% of the time. Support: We don’t just make promises. We stand behind them - your satisfaction is guaranteed. Our support team is ready to help you with any questions you might have before and after the sale. Value: In the never-ending pursuit of high performance, it’s important to stretch your limited budget as far as possible. Used equipment sells for a fraction of new prices, and with a partner like The Music Room you can upgrade any time you like and get most of your money back. There’s simply no better way to maximize a limited audio budget. Packaging: We’ve invested thousands of dollars and countless hours into mastering our state-of-the-art packaging process. Our custom foam-in-place packaging system allows us to safely package almost any item regardless of irregular shapes or sizes. Most importantly, this system provides our customers with a re-usable shipping box which increases the resale value of the product and provides a shipping method for easy, secure returns. Be seen by over 70,000 monthly visitors. Visit us online to Buy / Sell / Trade / Consign Payment: Prompt payment is expected. Paypal is preferred but all forms of payment are accepted. Unpaid item case will be opened after 3 days if no payment received. Shipping Times: Most Domestic orders ship within 1 business day of purchase. For International orders or freight shipments, please allow 2-3 business days. In all cases, tracking information will be emailed to you at the moment the shipping label is created. If you cant find it or have other questions about shipping & logistics, please contact us. Shipping Costs: Flat rate shipping costs are applicable within the contiguous 48 States (USA). These rates are clearly posted on each product page. For an International or custom quote (including Hawaii, PR, AK) please contact us. Returns: Every purchase made on eBay carries a 30-day, satisfaction-guaranteed return policy. If youre not happy with your purchase for any reason or if youve simply changed your mind... no problem. Simply ship it back for a full refund or exchange (minus S&H costs). If you have received an item that is defective in some way, we will make it right. Let us know - we will pay for return shipping and repair the item or refund 100% of your original purchase price.

Rupert Neve precision headphone amplifier RNHP - Excellent ex demo condition. Very little use, maybe 10hrs demo. Serious headphone amplifier from a recording industry giant. Brings sound alive in a way not many amps do, superb sound quality from this piece of studio level kit.  Superb reviews: https://darko.audio/2018/05/arresting-simplicity-from-the-rupert-neve-rnhp/ Retails currently around 550, chance to make a good saving from new, on a unit with little use and functioning exactly as intended.  Thanks for looking, happy bidding and good luck! Ebay / Paypal only, postage only, no collection.  If in doubt, check my feedback.  Any questions just ask! Fast delivery, fully insured.  RNHP Precision Headphone AmplifierWhether you’re tracking, mixing, or just listening to music, your headphone amplifier is as important to the final sound quality as your headphones – yet the world is full of headphone amps with compromised sonics, headroom, and power. To address these shortcomings, Rupert and his team at Rupert Neve Designs have developed the RNHP. Based on the headphone output circuit in the 5060 Centerpiece Desktop Mixer, the RNHP is a dedicated 24V reference-quality headphone amplifier with specifically-calibrated +4dBu balanced line, unbalanced RCA and 3.5mm (1/8”) inputs, housed in a rugged VESA-mountable steel chassis. With effortless, wide-open sonic performance and the ability to drive any pair of headphones without compromise, the RNHP allows you to perform, mix and enjoy your music with a new level of clarity.

RUPERT NEVE DESIGNS RNDI ACTIVE TRANSFORMER DI BOX. Mint condition - home use only. Complete with original instructions, packaging and box. From the manufacturer: The RNDI is a brand new DI box with custom transformers designed by industry legend Rupert Neve and class-A based FET amplifiers, creating a powerful and vibrant direct sound. If you're looking for a top quality DI solution that's capable of reproducing the full harmonic depth of your bass, guitar, acoustic instrument or professional equipment, this portable standalone DI is one of the best. It will give your sound a bit of that Neve Magic, an extra dimension that consistently brings out the best qualities of the sound source. What Rupert Neve Designs say about the RNDI After coming into existence during an experimentation with new transformer designs, the RNDI was fine-tuned over a series of listening tests against the the most popular high-end DIs available. It was in these tests where the RNDI always seemed to add another dimension to the sound and bring the instruments to life. The lows felt richer, deeper and fuller, and the highs had outstanding clarity without any added harshness. Most importantly, the design team noted: “As musicians, the RNDI consistently stood out as the DI we wanted to play through.” The RNDI’s signature sound is the product both of new custom Rupert Neve-designed transformers and class-A biased, discrete FET amplifiers. The carefully orchestrated union of these two elements is key to the RNDI’s unique response. The transformers provide superior passive isolation while adding musical harmonics and dimension to the sound. The low impedance, transformer balanced output excels at driving long cable runs, and performance is immensely consistent regardless of the connected equipment. This is very important for both live and studio environments where the unamplified signal may travel almost 100ft before hitting an amplifier. In other designs, these high capacitance lines cause major reductions in high frequencies, however the output stage of the RNDI unrivaled at handling long runs with minimal losses. The class-A and discrete FET amplifier in the RNDI is powered by industry-standard 48V phantom power on the XLR connection, and creates a very high impedance input of 2M Ohms that ensures consistent performance with a wide variety of instruments. The significance of the RNDI’s class-A design is that there is no crossover distortion added to the signal, which can add upper order odd harmonics to the sound that are musically dissonant in nature. With the RNDI, the overwhelming majority of harmonic content is 2nd order (octave) with some 3rd order present (fifth above octave). These musically relevant harmonics – present in subtle amounts – actually add to the richness of the original signal. The discrete aspect of the RNDI design means there are no ICs or digital components that can have negative effects on the tone. These efforts to harmonize the performance of the transformer and the FET amplifier have resulted in the RNDI’s extremely well balanced response. The low end tonality is thick and powerful, with frequency response several octaves below audibility. The high end is clear, present, and smooth, with a frequency response extending beyond 100kHz. The phase coherence is unrivaled at all frequencies, which keeps the sound as natural as possible – especially vital when blending the direct signal with a microphone capture of the same source. Simply put, there is no DI ever made that performs like the RNDI.

Selling used Rupert Neve Designs RNHP headphone amplifier. Excellent condition, ships in original box with all accessories. Item was bought on thomann music store in July 2022. Shipping is with registered mail. Product information: Based on the headphone output circuit in the 5060 Centerpiece Desktop Mixer, the RNHP is a dedicated 24V reference-quality headphone amplifier with +4dBu balanced line, unbalanced RCA and 3.5mm (1/8”) inputs – each specifically calibrated for optimum level and impedance – and housed in a rugged, VESA-mountable steel chassis. MAXIMUM INPUT LEVELS“A” XLR I/P: +22.8 dBu @ 1 kHz“B” RCA I/P: +14.7 dBu @ 1 kHz,“C” 3.5mm I/P: +3.3 dBu @ 1 kHz OUTPUT POWERAs measured with typical headphones, Z=44 Ohm: 3.617 VAC RMS @ 1 kHz = 300mW RMS.16 Ohm typical Load: 1.933 VAC RMS @ 1 kHz = 230mW RMS150 Ohm typical Load: 5.108 VAC RMS @ 1 kHz = 175mW RMS OUTPUT IMPEDANCE.08 Ohm @ 1 kHz, 16-150 Ohm load, 0 dBu input FREQUENCY RESPONSE+/- .2 dB from 10 Hz to 120 kHz NOISEMeasured with typical headphones, Z = 44 Ohm, BW 22 Hz - 22 kHz.“A” XLR Input: -101.9 dBV,“B” RCA Input: -100.9 dBV“C” 3.5mm Input: -88.8 dBV